Related
I am still searching for the perfect case, but I have found one that is better than the original (well, that wouldn't be hard!).
This is 'Inno Pocket' model OX-0313, and I got mine brand new off Ebay 'Buy Now' for £20 plus £3.50 postage.
It is made of "Light weight aircraft grade scratch resistant anodized aluminium" and weighs 75g. It has lots of cut-outs and you can use charger (although not cradle), headphones and camera without taking it out of the case. You can answer the phone, and end a call with it in its case, too (which is what I like), although without being able to access the screen, you still have to open it to dial.
On the downside it isn't very well made - when it's open the cover sort of wobbles on its hinges, although it's OK when closed. It's also not easy to open (definitely can't do it with one hand) and would have been greatly improved with a nice, swish press 'n' spring catch (I'm sure there's a technical term for this...). Also the texture of the case is such that it is incredibly slippery; I'm sure i'm far more likely to drop it, or that it will slide off a surface. Plus it's a bit awkward getting the stylus out. You have to remember to get it out before you open it, otherwise you have to close it again...
But I haven't reverted back to the old case yet...
Has anyone got anything better yet?
I find its best to not put the XDA II into a case, it rattles around in my jacket pocket along with my keys and wallet and stuff and doesnt seem any worse for wear after 4 months like that, i put a scrren protector on as soon as i got the unit and it is a bit scratched but the screen underneath is mint
slippery
It is incredibly slippery. I have already dropped it down two flights of stairs - and no damage!
I use my old Toshiba E570 case.
Also the stylus slips out too easily - so I use my thumbnail sharpened appropriately.
Bill
Re: slippery
BillyO said:
It is incredibly slippery. I have already dropped it down two flights of stairs - and no damage!
I use my old Toshiba E570 case.
Also the stylus slips out too easily - so I use my thumbnail sharpened appropriately.
Bill
Click to expand...
Click to collapse
I am using the Proporta Aluminium case for my XDA II. The case itself is slippery so I got some Egrips from Egrips.com to stick on the case. It works for me. A wee bit of bluetack stuck down the stylus slot will keep it there even if you a cartwheel.
Cheers.
When I had the XDA1 I hated the case. I had to use it in the beginning because I was so afraid of it being scratched or damaged. In the end though I stopped using it (even after putting some protective pads on the magnet connectors when I discovered they were scratching the phone) as it looked a bit naff.
The XDA2 one is much better! It's lined with felt and there are no places where it can seemingly scratch the phone. Yeah it's a bit obstructive and you look an idiot if you try using the phone with half the case dangling from your ear (I've found the best way is to take it out when you have to use the phone), but otherwise I'm very impressed with how much better in all aspects the 2 is over the 1. It feels more like an expensive phone (which it very much is) and the case feels more protective than the old one.
I've got a screen protector for it too and though it dulls the screen a bit (annoying in the sunlight) they're well worth having. No more fanatical cleaning (and risking getting bits under the screen) due to fingerprints on the screen etc.
Anthony
Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?
I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...
i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like
I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.
The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar
I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.
What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar
thanks kahibbi and SpeedRazr for your input, i look forward to your review
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal
Like the look & feel of a "simple" black leather case, but do NOT like the idea of covering the keyboard with a sheath of plastic (poor feel & seems bound to age poorly) - and so ended up with a Capdase BiFold Leather Case for my Fuze.
Posted pictures & problems with this case earlier, including some Surgery we performed to alleviate Case/Screen interaction. But while the surgery did Help, it did NOT eliminate the problem.
ALSO got concerned about reports of the top LAMINATE lifting off from the lower (button) area of TouchPros. As my screen protector has fallen prey to a similar lifting, having the laminate come up seems at least Possible.
Decided that what was needed was a cover for the TOP of the Fuze - one that would add as little bulk as possible, while both protecting the edges of the unit and providing a bit of separation between the screen and the top flap of the Capdase case (which would sometimes (RE)DIAL the phone at the end of a call! Nice trick if you could control it... )
Ended up buying a Seidio Innocase, which others have reviewed: it does indeed "fit like a glove" - wonderful precision, a nice feel, & leaves plenty of room around the actual Touch portion of the screen. (Carried the Fuze for several days in just the Seidio, but did not like the Exposed Screen.)
The combo of the Capdase BiFold Leather + the TOP HALF of the Innnocase seems to work perfectly: the edges are protected, the screen is protected, the Capdase fits nice & tight against the Seidio (which also provides a bit more protection for the top corners of the Fuze), and there has been no more Accidental Dialing (or Disconnects!).
Combination is obviously Not Cheap (think total came to around $55, incl Shipping Costs), but it IS flexible: can always remove Fuze from the Capdase & snap the Innocase back cover on if a SLIM profile is required.
The Combination fits nicely into an inner jacket / coat pocket (where a tri-fold wallet might fit), and also does well in the top pocket of an Over Shirt (Safari, jean, or wool - as long as pocket has a Closure of some kind!)
A few pictures are attached (hopefully...)
Can never pay too much for protection on our phones. Looking good!
might as well put the phone back in the box it came with and seal it tight so it'll never be scratched. jk
might as well put the phone back in the box it came with and seal it tight so it'll never be scratched
Indeed, the "naked" approach has some arguments in its favor - particularly if ALL you are carrying is just "a phone."
A Phone is relatively inexpensive & readily replaceable: My Razr never saw the inside of a case - but it certainly looked Well Used by the time it was replaced with the Fuze. (At only 16 months or so of usage.)
My Axim (PDA) has never been WITHOUT a case: it has served for over three times as long as the Razr did (and is now approaching 5 years in service), and only in past 6-months or so has it exhibited any outward signs of wear ("chrome" plating on D-pad & "DELL" logo are wearing off). OTOH, have been through numerous screen protectors, and the Daily Carry case (a RhinoSkin) looks like it has been through a war zone: in essence, the screen protectors and the case have 'sacrificed' themselves for the safety of the Axim - and the invaluable data stored within.
My Fuze is PDA FIRST, and Phone second. Like the Axim, I hope to keep the Fuze running for at least 4 years (hopefully longer!), and do not look upon it as Readily Disposable - like A Phone would be. Therefore a good case seems a very worthwhile investment, albeit one that is made more difficult by a) the dual purpose nature of the Fuze (it may be Phone Second, but it DOES still function as a phone), and b) the Sliding Keyboard.
For those who view the Fuze as simply a Fancy Phone - AND have the wherewithal to replace it every couple of years - a case is undoubtedly either a Nuisance or merely a Fashion Statement.
But for others, choosing a good case seems to be a reasonably important decision - otherwise there would not be nearly as many posts on the subject as there are...
well to each their own I guess, I generally change phones every 12 months or so. I guess I cant justify using a case to cover the phone
Kursell Case
This case is ok I own but I like my Kursell orbit Flex Case a lot better the flip leather lid Comes off thats so great plus I love the tight plastic over the keyboard the best case I ever seen
http://www.sfplanet.com/product/753...ex_with_Ratchet_Swivel_Clip_Black__Beige.html
This case is ok ... but I like my Kursell orbit Flex Case a lot better the flip leather lid Comes off thats so great plus I love the tight plastic over the keyboard....
There are several nice looking cases available - the Kursell is one & Pdair makes a couple, although recall looking at others as well - that utilize the Plastic Sheath Over The Keyboard approach. Looked long & hard at several of these, as (like the Kursell) some have a very elegant look!
Unfortunately could not get past the plastic sheath. This strays into "personal preference" territory, but
1) Dislike the "feel" of the plastic on top of the keyboard;
2) A plastic sheath seems to force the two layers of the Fuze apart. That should vary with the type of plastic used: if I hold the Fuze up to a bright background it APPEARS that the gap between the halves should be adequate for a precisely THIN sheet... Overall fit of the Lower part of the case might have an impact here as well, but that's hard to gauge without buying Every Case on the market...
3) Was concerned that the plastic would not WEAR well, given sufficient usage. Yellowing, becoming ratty at the edges, & stretching all seem likely.
Case selection is like PIM choice: Personal Preferences play a major role in product selection, and there are multiple Solutions that are equally viable according to the preference of the end user.
Slip case, or Attached case?
Belt Clip, or Not? (Detachable, or Not? Rotating or Fixed?...)
Leather, Metal, Silicone, Hard Rubber, Or ??
Removable Top Cover (Kursell) or Permanently Attached?
Holders for data cards, styli, Other Things?
Have LOVED the RhinoSkin that has served as the Daily Carry Case for my Axim. But it is an Industrial looking piece of hardware - rather clunky & now somewhat beat up in appearance. So also have a nice (Belkin) Leather case that I use for "need a suit jacket" events.
Frankly - along similar lines - can imagine times where I might forego the extra protection of the Capdase and simply carry the Fuze in the Innocase, as it certainly presents less bulk when in the Seidio...
Options are Nice, but trying TOO many gets expensive!
Looking to also purchase the seidio innocase, but before I do can ppl confirm if it gives problems on pushing on the screen. Have had such cases that seem okay for a few weeks, but then the screen becomes unresponsive due to the case pushing on the touch portion of the screen.
Thanks
So i did this with 3m 1080 scotchprint carbon series and with nail scissors cutting it from 10x20cm took a while, about 2 hours to get it look nice i also cut a piece for the home button which took awhile too to get it fit perfectly!
to make this thread not so useless, recommend or post pictures of your customized gs2
anyway, what do you think ?
Looks excellent mate, would love a tutorial wouldn't mind that look myself.
Very nice...
Sent from my SGH-T959V using XDA App
Nice, I have a Samsung mesh case on mine which would cover that off
Does it say 0.8 MP?
That looks really nice, shame your not selling them
Its 0.8 because is on mirror ( 0.8 | 8.0 )
cost of this project was about 10-20 bucks. really, its not that difficult to make, just needs patience and good light. that is the first one i've ever made!
@itehappy most definitely hope its not a 0.8mp unit anyway nice to see people here from i8910 community!
Thanks for the prompt... Just ordered a sheet of 1200 x 300 for under $AUS 10 .
What did you cut it with? Just a normal sharp knife/razor blade? Any tips on cutting the corners, makig the holes, putting the sides and corners on etc???
I know it doesn't require a huge 20 page instruction book but if you could provide some tips or suggestions I think that would be great... Unless you plan on selling them then I suggest not to give the tips
Edit: Just realised you only did the back cover and not the edges... Maybe I will report back when I finally get my sheet and start cutting.
Nice! Tutorial would be appreciated!
When I read the thread title I imagined it would look tacky, but it actually looks really good
Nice. If you want to make some to sell I will buy.
I have a Silver one and you buy them online... o.o
looks great dude, what's the texture of the tape like though? The phone is slippy enough with the stock cover, with smooth tape it must be worse!
i want this too! Looks very nice!
Sent from my GT-I9100 using XDA App
+1 for you making them and selling them. (I don't have the patience)
viva.fidel said:
looks great dude, what's the texture of the tape like though? The phone is slippy enough with the stock cover, with smooth tape it must be worse!
Click to expand...
Click to collapse
It's actually textured, the "weave" is bumpy, raised a few cm, provides a bit of a rough, oil free surface without being uncomfortable. And you can do a fun DJ scratching imitation if you run your fingernail over it quickly.
I've been using it (they call it 3M Dynoc in North America) on the back of my SGS1 for over a year now, and on the back of my Tab 7" for nearly as long.
I couldn't be arsed to cut my own, so I bought mine pre-cut from PhantomSkinz (Skinomi also sells a very similar "skin"). The phone kit costs ~$25 before coupon, and it covers the entire back, the sides, and even comes with a wet-apply screen protector.
It's dead easy to apply, though the edges take a bit of practice...but if you screw up, just lift it up and try again.
It's durable as hell, the SGS1 has one minor, nearly invisible scratch in it after a year of abuse in my pocket, in my motorcycle jacket or tank bag, dirty tables, etc. They look far more "high tech" than the funky designs Samsung used on the back of those devices, especially the Tab.
Occasionally, I'd catch the bottom edge of the tape on the SGS with my fingernail when removing the battery cover and it'll lift a bit. Apply some heat and it goes right back into shape.
Little trick with the rough feel on the edges...heat it (desk lamp or hair dryer both work well) and run your fingernail over the edge...this thins it, making it much smoother.
I just placed an order with Skinomi for both a SGS2 and Galaxy Tab 10.1 "carbon" kit. On the SGS2, I'm thinking about leaving the battery cover naked since it's cheap to replace and already textured, and just using the carbon on the chin and sides. The chin on mine is starting to show some friction wear along the edge closest to the battery cover, and the sides get slippery as a bar of soap.
pbrown77 said:
Thanks for the prompt... Just ordered a sheet of 1200 x 300 for under $AUS 10 .
What did you cut it with? Just a normal sharp knife/razor blade? Any tips on cutting the corners, makig the holes, putting the sides and corners on etc???
I know it doesn't require a huge 20 page instruction book but if you could provide some tips or suggestions I think that would be great... Unless you plan on selling them then I suggest not to give the tips
Edit: Just realised you only did the back cover and not the edges... Maybe I will report back when I finally get my sheet and start cutting.
Click to expand...
Click to collapse
wait wait whaaat? 1200x300 for $10 dollars??!? is it 3M 1080 series or 3M Di-noc?
i cut all this with little scissors, about the length of a palm, maybe just a bit more. corners wont need any special stuff, just a hair dryer to get it a little more flexible. ONE THING, when i bought the carbon, I tought that i'll just bend anything which comes over the edge, to backside of the plate. well its not that easy. gs2 cover is so precisely cut that it doesnt allow any kind of extra stuff under the cover, so you just need to cut it little bit at a time, then try it, and cut a bit more and try, untill it fits properly. this will take most of the installation time. just be careful not to cut too much! same goes for the camera hole. very carefully and take the time it needs, even if there is 0.1mm too much, the camera wont fit properly. not difficult, but takes time. a hour atleast.
meh, im a nice guy, i'll give all the tips needed
@viva.fidel
the surface of the new 3M 1080 series has more rubbery feel than the Di-noc (what skinomi uses) and there is seriously good grip! Doesn't feel sticky, but still offers awesome grip believe me! maybe because of the carbon texture i dont know but has good grip for sure!
sorry if theres typos, wrote whole message with GS2 in PORTRAIT mode
Hi, If you were to sell any, I would buy one, It look really nice
ignore now!
Hi all fellow Priv'ers
Just thought I'd share my experience now that I finally got the official smart flip case.
First impressions are it's a premium case, with real leather finish and doesn't bulk out the Priv too much and feels really nice to the touch.
What's really great about it is the 'smart' functionality, which basically means that when fitted and the case closed what you get is a square cut out on the front that displays the time etc. when the power switch is pressed and the case is closed. It also shows recent missed calls, emails, notifications, etc. on screen and allows you to flick up and view the details of the notifications without having to open the case, so very handy allowing you to quickly see what notification has come through. The case also has a cut out where the notification light is (top right) so that lights up still and is noticeable even with the case closed.
I paid around £25 GBP on Ebay for mine, from here: http://www.ebay.co.uk/itm/like/BRAN...0068&clkid=1598827080704154862&_qi=RTM2108002
The case retails for £45 GBP officially, so a bit of a bargain.
I can get some pics uploaded of it in action if anyone's interested as not seen anything posted anywhere else about the case.
FYI the plastic slider "hard" case is cheap plastic, it does fit the phone well but makes it too wide to fit into the leather slip-in pouch and personally I find it feels tacky.
Happy with the leather slip-in pouch, tight fit and it has holes in the right places for charging and notification lights.
Viperlin said:
FYI the plastic slider "hard" case is cheap plastic, it does fit the phone well but makes it too wide to fit into the leather slip-in pouch and personally I find it feels tacky.
Happy with the leather slip-in pouch, tight fit and it has holes in the right places for charging and notification lights.
Click to expand...
Click to collapse
I agree with you that plastic seemed like a bad move and should have been some aircraft grade aluminum or something. That said, I think the added width and thickness make it easier to type on the physical keyboard because some of the keys are no longer on the edge and I also don't trust myself to drop it outside of the pocket pouch and it only takes once.
Also, I found a guy on esty selling handmade leather Priv pouches in various leather colors for less than the OEM pouch. I contacted him with my new Priv dimensions with hardshell and he said he had no problem with the custom order.
I think if it's a night on the town, I might use the phone naked with OEM pouch but everyday use, I'm going with hardshell with custom pouch.
here are a couple pics of his work:
pics
I've got both the tan smart flip and blue slider brand new boxed if anyone wants them. Just pm me and I'll do a good price in the UK. Both unused because I returned the Priv before use. I really didn't think it was an upgrade over my note 4 after using it for just over a week. Since I've bought the note 5 which is amazing.
Can I have a pics of them? Im interested.
SQ9KFX said:
Can I have a pics of them? Im interested.
Click to expand...
Click to collapse
pm'd
CharlesW123 said:
Hi all fellow Priv'ers
Just thought I'd share my experience now that I finally got the official smart flip case.
First impressions are it's a premium case, with real leather finish and doesn't bulk out the Priv too much and feels really nice to the touch.
What's really great about it is the 'smart' functionality, which basically means that when fitted and the case closed what you get is a square cut out on the front that displays the time etc. when the power switch is pressed and the case is closed. It also shows recent missed calls, emails, notifications, etc. on screen and allows you to flick up and view the details of the notifications without having to open the case, so very handy allowing you to quickly see what notification has come through. The case also has a cut out where the notification light is (top right) so that lights up still and is noticeable even with the case closed.
Click to expand...
Click to collapse
The slider case is a bit tacky for sure - but, does protect the phone very well, though the amount of bulk added is substantial. I received both the Priv and the case together so never really used the phone naked. Couple of days ago I was showing the phone to a friend and he asked me to take it out of the case. I must say I was surprised myself at how compact the Priv really is - not just for a device with a full Qwerty keyboard, for any phone, Blackberry have done extremely well in putting all in such a small package.
The flip case looks quite nice - how easy do you find it to use the sliding keyboard with it?. does it require flipping the front cover to the back??.
RizSher said:
The slider case is a bit tacky for sure - but, does protect the phone very well, though the amount of bulk added is substantial. I received both the Priv and the case together so never really used the phone naked. Couple of days ago I was showing the phone to a friend and he asked me to take it out of the case. I must say I was surprised myself at how compact the Priv really is - not just for a device with a full Qwerty keyboard, for any phone, Blackberry have done extremely well in putting all in such a small package.
The flip case looks quite nice - how easy do you find it to use the sliding keyboard with it?. does it require flipping the front cover to the back??.
Click to expand...
Click to collapse
Cool, yes the flip case (which is very slim too) needs flipping/opening to allow access to the keyboard but as the front is super slim (maybe 3-4mm) once opened it tucks behind fine so using the keyboard is not hampered at all.
Do you have any issues with them?
My got something like wrinkles on it and start ripping.
Also have the wrinkling on the outside of the hinge area, guess it's not the most robust leather they used huh! :-/
Sent from my STV100-4 using XDA Premium HD app
I have spoke with the seller, I'm gonna return my one and will get full refund.