Hi guys.
You will all properly think here we go again with this noob question.
I have spent several nights figuring out how to jailbreak / dev unlock my omnia 7 without success.
It was an official t-mobile de version but i did the resistor trick to enter download mode and flashed the retail version i could find in one of the posts.
Now i am on version 7.0.7392 and i would like to unlock the device so i could registry edit my region so i can have a dutch phone when the mango update roles out. ( i also tried downgrading to nodo )
i have read much post but every time i get a error communicating message.
i have edited my host file, installed dev phone software installed certs, stopped running services on port 443, etc. etc.
but i couldn't connect to the phone with chevron.
Do i need to be on a special firmware version or something before this works?
is there someone out hear ho could help?
is there nobody how could help me?
hello,
i had the same issue as you a while back. if i remember correctly, chevron doesn't support nodo - i think it only supports 7008 or earlier. so, flash a pre-nodo rom, and remember to put your phone in aeroplane mode before you connect it to your pc to dev unlock it. also install samsungtools.xap and select prevent devie relock, as well as enable 3g toggle if you want - i find it very handy. reboot your phone after selecting prevent device relock in the samsung tools on your newly developer-unlocked phone.
Hi there thanks for the reply, i have already downgraded to version 7.0.7004
but still the same errors, cant communicate with phone. make sure you are running zune and the usb cable is connected.
do i need to run this from a windows xp machine?
i have done so many things now, installing dev tools. edit registry , airplane mode downgrading firmware, stop running process using port 443, tried 3 diferent machines already now. i cant figure it out.
Is there any solution for this problem .I am on 7008 and getting the same errors I need to install apps on this device
I managed to get get it work. but it is verry strange.
i do not know what it didt to make it work.
but you need to install windows developers tools ( start from a fresh install of zune and developers tools ) run chevron as administrator with the screen unlocked.
Also make sure you install the certificate on your phone.
Curious that I see no reports of install problems with Mango on the Dell....yet, especially with those coming from any of the Beta's. Has anyone seen any reports anywhere?
I'm here to report 1.
I was on Mango release build. I flashed back to 7004, and followed the update path to 7008, then 7403 then the release build.
When completed, the VP is in a reboot cycle triggered by any touch. I've done this several times.
The reboot cycle appears as follows:
The update completes with no error and the final reboot starts. On reboot, if no sim is in place, the sim error screen appears. This is normal. Touch the screen to close, forces a reboot, regardless of the update complete message.
Repeat process, this time with a sim in place, Update is installed, success messages appear in zune and on the phone. Disconnect phone, touch the screen, reboot occurs.
Repeat process. let the phone reboot until it reaches the desktop. connect via cable to zune. The device is recognized, but NO sync occurs. Go to settings/update and the current build is recognized. Restore is available, and will work.
if the screen goes dark, slide up or touch power will bring up the Lockscreen. Wifi does show, so does 3g and battery, but NO lockscreen release options are available. Again, any touch forces reboot.
I've reported to Microsoft, but was not considered serious since it cannot be reproduced.
Did the update with my HD7 so Zune, the downloads, etc are in place and working.
Getting back to 7392 is an option, so I am not dead in the water. But wanted to make sure reports of problems with the update were reported.
Since I flashed back to 7004, I lost the firmware updates. I noticed that the subsequent updates do NOT flash any firmware. According to MS EULA, all updates are cumulative...contain all previous updates. I have flashed from 7004, to 7008, to 7392 to 7304. During none of these flashes has the firmware been updated. the 105 firmware is maintained. I thought I read that the 7420 update included the 219 firmware....
anyone else having this problem?
http://forum.xda-developers.com/showthread.php?t=1280097
Please read my problem I have encountered and how I have solved, hope this helps.
After step 6 while trying to install Mango I recieve error code 801812c1.
I faced a problem while updating to Mango via Zune software.
My phone kept restarting while installing 7.10.7720.68 update. Stuck in step 8/9 for about 30 mins.
I did the following to recover, nothing worked.
1. I guess my phone got bricked, stuck in an infinite restart loop. I cancelled my update and removed the data cable. Removed battery and put it in again, tried restarting, still in infinite loop. Thanks DELL & Microsoft!
2. I read in Dell forum that I have to turn off my phone, then hold down Power Button + Volume Down + Camera button to enter PC download mode, so that I can restore it from Zune software. Trying it now.
3. Restore from Zune doesn't work, even its stuck at 0% for about 30mins.
4. After a few tries, removing battery, removing the SIM and doing some random stupid stuff, tried again the restoration seemed to work, I mean it started to restore.
5. Finally, I guessed its time for me to give up. Restoration failed with Error Code 8018009B. So its bricked for now.
6. I was greeted with this nice message from Windows Phone support tool
"Communicating with device. Please wait for Recover button to be enabled.
Support Tool version 4.8.2345.0
The tool cannot recover this phone. Please contact technical support."
I didn't even force the update, it was regular update which I was able to start from Zune without forcing it. NOW ITS BRICKED!
7. I took my phone to Dell Service Center, those guys couldn't figure out the problem, they said its a new phone here in India and don't have any technician to fix it.
I posted the same in Engadget, I got no response from anyone, so am posting here hoping to get a solution. I at least want my phone working, I'm happy without mango.
theonlyremedy said:
I faced a problem while updating to Mango via Zune software.
My phone kept restarting while installing 7.10.7720.68 update. Stuck in step 8/9 for about 30 mins.
I did the following to recover, nothing worked.
1. I guess my phone got bricked, stuck in an infinite restart loop. I cancelled my update and removed the data cable. Removed battery and put it in again, tried restarting, still in infinite loop. Thanks DELL & Microsoft!
2. I read in Dell forum that I have to turn off my phone, then hold down Power Button + Volume Down + Camera button to enter PC download mode, so that I can restore it from Zune software. Trying it now.
3. Restore from Zune doesn't work, even its stuck at 0% for about 30mins.
4. After a few tries, removing battery, removing the SIM and doing some random stupid stuff, tried again the restoration seemed to work, I mean it started to restore.
5. Finally, I guessed its time for me to give up. Restoration failed with Error Code 8018009B. So its bricked for now.
6. I was greeted with this nice message from Windows Phone support tool
"Communicating with device. Please wait for Recover button to be enabled.
Support Tool version 4.8.2345.0
The tool cannot recover this phone. Please contact technical support."
I didn't even force the update, it was regular update which I was able to start from Zune without forcing it. NOW ITS BRICKED!
7. I took my phone to Dell Service Center, those guys couldn't figure out the problem, they said its a new phone here in India and don't have any technician to fix it.
I posted the same in Engadget, I got no response from anyone, so am posting here hoping to get a solution. I at least want my phone working, I'm happy without mango.
Click to expand...
Click to collapse
Sorry to hear this....but, I think you'll be happier with Mango...About your phone...
If this was NOT a forced update, Dell may be able to help you. Microsoft has made updating 'almost' brick free. If you log into Zune, a backup is made, you're using the cable that came with dell, not using a USB hub, have a solid internet connection,and are NOT forcing the update, the blame for the problem could fall onto the update itself.
As part of a test team, I used to try and brick Windows Phones. The easiest test was to remove the cable during different phases of update. I was never able to brick the phone. Sudden power loss on the PC also was tested. Never was able to brick a phone. Apparently the download and transfer process is done in parts, meaning the update is downloaded, completed, then transferred to the phone, then installed. If the update is interrupted during download, no worries, or even transfer, no worries, reboot the phone, try again.
The process of install is done 100% on the phone so no bad cables, or shut down of internet can impact it. Even if connection between PC and phone are lost during the install portion, the message still tells you to check the phone. The install will continue.
that leaves only the relationship between the installation and the files itself. If the update package is corrupt or damaged, then it may not be able to successfully complete. If this is the case, you have an issue with Dell and Microsoft. Since Microsoft can only help you with software, I argue that you would have relief, as in possible phone replacement, from Dell.
Do you have a way of contacting Dell from India?
alodar1 said:
Curious that I see no reports of install problems with Mango on the Dell....yet, especially with those coming from any of the Beta's. Has anyone seen any reports anywhere?
I'm here to report 1.
I was on Mango release build. I flashed back to 7004, and followed the update path to 7008, then 7403 then the release build.
When completed, the VP is in a reboot cycle triggered by any touch. I've done this several times.
The reboot cycle appears as follows:
The update completes with no error and the final reboot starts. On reboot, if no sim is in place, the sim error screen appears. This is normal. Touch the screen to close, forces a reboot, regardless of the update complete message.
Repeat process, this time with a sim in place, Update is installed, success messages appear in zune and on the phone. Disconnect phone, touch the screen, reboot occurs.
Repeat process. let the phone reboot until it reaches the desktop. connect via cable to zune. The device is recognized, but NO sync occurs. Go to settings/update and the current build is recognized. Restore is available, and will work.
if the screen goes dark, slide up or touch power will bring up the Lockscreen. Wifi does show, so does 3g and battery, but NO lockscreen release options are available. Again, any touch forces reboot.
I've reported to Microsoft, but was not considered serious since it cannot be reproduced.
Did the update with my HD7 so Zune, the downloads, etc are in place and working.
Getting back to 7392 is an option, so I am not dead in the water. But wanted to make sure reports of problems with the update were reported.
Click to expand...
Click to collapse
Called Dell Mobility. Even though I could restore back to previous version, they offered to replace the device, which I took.
Kind of sad though, I've never had problems with wifi or anything else on this phone. In fact the only problem ever with a VP was me dropping the thing. I'm hoping the refurb I get will also not be a problem.
alodar1 said:
Sorry to hear this....but, I think you'll be happier with Mango...About your phone...
If this was NOT a forced update, Dell may be able to help you. Microsoft has made updating 'almost' brick free. If you log into Zune, a backup is made, you're using the cable that came with dell, not using a USB hub, have a solid internet connection,and are NOT forcing the update, the blame for the problem could fall onto the update itself.
As part of a test team, I used to try and brick Windows Phones. The easiest test was to remove the cable during different phases of update. I was never able to brick the phone. Sudden power loss on the PC also was tested. Never was able to brick a phone. Apparently the download and transfer process is done in parts, meaning the update is downloaded, completed, then transferred to the phone, then installed. If the update is interrupted during download, no worries, or even transfer, no worries, reboot the phone, try again.
The process of install is done 100% on the phone so no bad cables, or shut down of internet can impact it. Even if connection between PC and phone are lost during the install portion, the message still tells you to check the phone. The install will continue.
that leaves only the relationship between the installation and the files itself. If the update package is corrupt or damaged, then it may not be able to successfully complete. If this is the case, you have an issue with Dell and Microsoft. Since Microsoft can only help you with software, I argue that you would have relief, as in possible phone replacement, from Dell.
Do you have a way of contacting Dell from India?
Click to expand...
Click to collapse
Thanks alodar1..
I asked Dell to do a service and added that I don't need an replacement. The service guy said the phone is new and they are not trained to service this, so they would only do a replacement. I'm not ready to do a replacement, they ask me to go for international warranty, moreover they replace with factory refurbished phones.
BTW, I would like to know if there is anyway to format the memory card without removing or replacing. Right now I have another problem whenever I press the power button to boot my phone it directly goes to Software Download mode, the camera button was never pressed.
While trying to repair using Windows Phone Tool, I received this error "The tool cannot recover this phone, please contact technical support", so being a little curious I fired up .NET Reflector and loaded the tool to find out what was happening, I found that the this error is thrown if the phone is not Samsung made (see attached file). Is there any similar tool for Dell Phones?
*UPDATE 1* Is there anyway to force flash without using Zune, any third party tool, Zune seems to go to restore mode and can't find my phone. I have a feeling that erasing the contents of SD card will solve the problem.
*UPDATE 2* I did the registry trick and was able to see my DVP in Computer window. But instead of one DVP, I see 2 and both have storage of 3.75 GB each. But my DVP is 16GB, both DVP are empty. Previously I was never able to see my DVP even after registry patch. Now I have feeling that corrupt drivers caused the problem, yesterday I completely removed and reinstalled Zune Software, now the registry patch worked.
Please let me know with problem my DVP could be hardware fault or just the software. If its hardware then I'll go for replacement right away.
Just recieved my replacement VP. Ordered yesterday around noonish. Went downstairs to get the Motorola Xoom box that was delivered...and the VP was there too. Bonus....
Did not come with Mango....but....there's not a scratch on this thing....not a rub, not a bump...nothing. Still has plastic in places I doubt they would put plastic after refurb. I'm wondering if I got one of hte left over new ones....
Doesn't matter....Mango won't install no matter what...so...maybe I'll try ICS.
My Mango is now Ripe..
alodar1 said:
My Mango is now Ripe..
Click to expand...
Click to collapse
Nice to hear that!
alodar1 said:
Since I flashed back to 7004, I lost the firmware updates. I noticed that the subsequent updates do NOT flash any firmware. According to MS EULA, all updates are cumulative...contain all previous updates. I have flashed from 7004, to 7008, to 7392 to 7304. During none of these flashes has the firmware been updated. the 105 firmware is maintained. I thought I read that the 7420 update included the 219 firmware....
anyone else having this problem?
Click to expand...
Click to collapse
How do you flash it back to 7392? I need to flash mine.
theonlyremedy said:
Nice to hear that!
How do you flash it back to 7392? I need to flash mine.
Click to expand...
Click to collapse
not a flash, but a restore. I've always made copies of my backups ...
You an't reflash as the user above me already said, that said, the backups are stored in
=> %userprofile%\AppData\Local\Microsoft\Windows Phone Update
so for backing up your restore poiints you can copy that folder and then keep it.
theonlyremedy said:
Nice to hear that!
How do you flash it back to 7392? I need to flash mine.
Click to expand...
Click to collapse
I was just curious. I wanted to fix my phone. The backup restore didn't work. I was just looking for some way to flash it or at least format the SD Card, so that I reinstall OS and can get my phone working. After four days of trying to fix my phone, I finally gave up and sent it for service to Dell. I even copied a little bit of code from phone support tools and tried them, I was just able to get the phone details without any problem, Mango was installed in the phone, but still it didn't boot. It would be good if we find a way to touch the SD card and format it from PC, probably we'll be able to revive many bricked phones. I would be happy to join the project if some one starts it. I can write C# code.
Mine is an error during backup
Error Code 801812DC during backup
I also add new thread.
If anyone knows, please tell me what I need to do.
Can anyone please explain what the Zune update error message actually means?
Have just spent the last hour searching the whole web and nobody seems to know.
I have managed to successfully download the Mango 7720 update from Zune on top of my previous BTTF rom. Had no problems with Mango update but now when i come to update the clean up update i constantly get the above message.
I have read all the solutions on the developers page (sorry but couldn't post this thread there) and have tried them all. So would just like to understand what the actual error means!!!
you maybe wining price for possible 100 or more asking same question here....
make sure your device not synced with Zune as Guest
disconnect phone
restart computer, restart phone
start Zune, connect phone
try update
if error occur again, restart phone few times...
It's a generic error code. Can mean a few different things; too low of battery (which is why I got it), USB port needs updating, device provisioning .cab wasn't used (so Zune won't recognize it to update it), settings for your Zune client, etc., etc.
^^ There's just a few examples of why you can get that error code, and I'm sure there's more. Hopefully one of the things I mentioned helps.
Sent from my King LEO using XDA Windows Phone 7 App
Thank you for providing some answers. Because I had just used Zune to get the Mango RTM update, I think I can eliminate, Zune client, guest sync and usb drivers. That leaves your suggestion of either low battery or cab install. I know I did cab install when doing the BTTF install. Therefore when I connected to Zune I got the 7720 RTM update.
Can I install the Device provision.cab again without causing any issues?
Zune 80004005 error code. On step 7 of 9
Trying to update from official zune 7403 to 7720 isv beta.
Tried taking sd card out sim out reserved space increased time zone changed.. Have already tried it about 5 times
Can anyone suggest anything else or should I push the cabs through?
OMG. After trying everything and giving up hope. I have just logged on to my PC upstairs and in a vein attempt clicked the install update button on Zune and hey presto, update installed. Technology is unpredictable and has a bloody mind of it's own.. So conclusion is just keep turning both your phone and pc on and off and pray it's your lucky day (7hrs later 30+ attempts)
A big thank you to everyone who has posted possible solutions.
Hey, congrats man! Glad you got it.
Sent from my King LEO using XDA Windows Phone 7 App
dxdy said:
you maybe wining price for possible 100 or more asking same question here....
make sure your device not synced with Zune as Guest
disconnect phone
restart computer, restart phone
start Zune, connect phone
try update
if error occur again, restart phone few times...
Click to expand...
Click to collapse
Can U old point me to where this problem (error 800b010a) has been solved cause it wasn't my lucky yes'dat or today I'll keep tring but don't think it'll work. thanks
Sent from my HD2 using XDA Windows Phone 7 App
Hi
It hasn't been officially resolved. It just seems people are resolving this error due to different problems. I found the thread in the developers section useful, titled ISV beta clean up. Hope some of the answers in there help. If not, like me, just keep shutting down both your pc and phone and pray. Good luck!!!
http://forum.xda-developers.com/showthread.php?t=1281902
Mangledraver said:
Hi
It hasn't been officially resolved. It just seems people are resolving this error due to different problems. I found the thread in the developers section useful, titled ISV beta clean up. Hope some of the answers in there help. If not, like me, just keep shutting down both your pc and phone and pray. Good luck!!!
http://forum.xda-developers.com/showthread.php?t=1281902
Click to expand...
Click to collapse
thanks but good news for me at last it updated lost count how many times ive tried. funny thing is i did it as a guest in zune with a flat battery....lol
so my advice (that anit worth much) is try then try again then again then again until your sick of it all......then u guessed it buy an i-phone
i had the same error... i tried again and again and again........ finally done it!!
to update, you need a bit of luck, I did not reboot PC or phone, just disconnect and reconnect again for times(each time lease disconnected for couple of hours, just forget it...) then it works...
good luck!
Hi guys, I tried searching the forum for this same question as well as googling, but I seem to have failed at that, so I stopped lurking, registered and am asking directly:
I am planning on selling my Omnia 7, but am curious as to how the whole "reset my phone" option works. I have mango update, not interop unlocked tho (I didn't update the latest 2 bugfixes fearing that my unlock would go away, although after some lurking that fear is proven irrational) and I want to "advertise" my phone as jailbroken, but I can't seem to be able to "detach" my hotmail account from the phone, and people have suggested that "reset my phone" option takes the phone all the way back to initial configuration. Now, what I'm curious about is - does this option also undo my jailbreak?
If so, how hard is it to re-unlock the phone for the new owner (I'd like to help him out as much as I can, in case he is not a tech-savvy guy and would rather get a fully unlocked product hassle free)?
I got my Omnia 7 and unlocked it via chevron, so it was fairly easy.
Thank you in advance for any help provided .
If it really is Mango, and not 8107, than you need to hard reset the phone and windowbreak it again. You don't need to enter your liveID to do this. After that, your phone will be clean of ALL your info, files and settings and jailbroken. You can than update it to the latest OS version (8107) via Zune so you can advertise that too.
http://windowsphonehacker.com/articles/the_windowbreak_project-12-23-11
PS: The buyer will not be able to windowbreak again if he needs to if you don't provide him with the backup files from your computer, because samsung has "fixed" the hole windowbreak was using in the new updates. You could backup your phone after the hard reset (but before you update it to 8107) and provide that. It should not be a huge file when the phone is hard reseted.
d.a.v.o.r said:
If it really is Mango, and not 8107, than you need to hard reset the phone and windowbreak it again. You don't need to enter your liveID to do this. After that, your phone will be clean of ALL your info, files and settings and jailbroken. You can than update it to the latest OS version (8107) via Zune so you can advertise that too.
http://windowsphonehacker.com/articles/the_windowbreak_project-12-23-11
PS: The buyer will not be able to windowbreak again if he needs to if you don't provide him with the backup files from your computer, because samsung has "fixed" the hole windowbreak was using in the new updates. You could backup your phone after the hard reset (but before you update it to 8107) and provide that. It should not be a huge file when the phone is hard reseted.
Click to expand...
Click to collapse
Amazing response Davor, 100% documentated and acurate.
d.a.v.o.r - your answer is much appreciated, however, I found a video on youtube demonstrating windowbreak method being done on the same version of software (how I forgot to mention that in my first post is beyond me and I apologize for being vague) I had and it was being done after the uploader restarted his phone using the "reset my phone" option, so I took that as a sure sign it could be done with no problem.
Sold my phone, buyer seems to be a regular on XDA tho, so I'm guessing he'll have no problems whatsoever .