Related
Is it possible to boot both Android builds with MAGLDR ?
I have already flashed an Android NAND ROM,but an android rom from sd,too,would be the beeesssttt DD
So is it possible to start the second one via MAGLDR?
thanks ^^
If you go to the Android SD development section, you'll see that some ROMs list that they can be booted from MAGLDR.
http://forum.xda-developers.com/forumdisplay.php?f=735
You'll just need to check in each ROM's thread and first post to see if it's able to be booted from MAGLDR instead of HARET.
Once you have an Android SD build that's compatible with MAGLRD on your SD card, you'll need to enter the MAGLRD menu and firstly select the folder the Android SD build is in, then select 'boot AD SD' to load the SD android build.
Also, here's a guide to boot Android SD from Maglrd: http://forum.xda-developers.com/showthread.php?t=913964
jonas2295 said:
Is it possible to boot both Android builds with MAGLDR ?
I have already flashed an Android NAND ROM,but an android rom from sd,too,would be the beeesssttt DD
So is it possible to start the second one via MAGLDR?
thanks ^^
Click to expand...
Click to collapse
Yes.
You can also have WP7 on NAND and Android on SD. In future you will also be able to boot WM6.5 from SD if you wish.
TheATHEiST said:
Yes.
You can also have WP7 on NAND and Android on SD. In future you will also be able to boot WM6.5 from SD if you wish.
Click to expand...
Click to collapse
Hehe thanks for that information
DavidMc0 said:
If you go to the Android SD development section, you'll see that some ROMs list that they can be booted from MAGLDR.
http://forum.xda-developers.com/forumdisplay.php?f=735
You'll just need to check in each ROM's thread and first post to see if it's able to be booted from MAGLDR instead of HARET.
Once you have an Android SD build that's compatible with MAGLRD on your SD card, you'll need to enter the MAGLRD menu and firstly select the folder the Android SD build is in, then select 'boot AD SD' to load the SD android build.
Also, here's a guide to boot Android SD from Maglrd: http://forum.xda-developers.com/showthread.php?t=913964
Click to expand...
Click to collapse
Okay i will do that
You have helped me very much,bro
Is there a possibility that we can have 2 Android OS simultaneously i.e, MAGLDR version & SD Card version..???
If so, is there a bootloader that let's us select the version as we had in the SD card ROMs..???
You can use this
http://forum.xda-developers.com/showthread.php?t=1090783
to install MAGLDR and Clockwork recovery.
Get a CWM NAND ROM and put the rom.zip on your phone's sd card and flash it via Clockwork.
Then get an sd build, extract it to your sd card, and follow all the installation steps in the thread you downloaded it from.
You boot the sd build from the MAGLDR menu by chooding AD SD, but first you must set your sd directory. To do this, in the MAGLDR menu choose Services, BootSettings, then AD SD Dir, and choose the directory of your sd build.
Once you have flashed MAGLDR and CWM, you must hold down the Power button while booting up your phone to get to the MAGLDR menu.
Make sure you flash the right partition size for the ROM you'll be flashing to NAND
huggs said:
You can use this
http://forum.xda-developers.com/showthread.php?t=1090783
to install MAGLDR and Clockwork recovery.
Get a CWM NAND ROM and put the rom.zip on your phone's sd card and flash it via Clockwork.
Then get an sd build, extract it to your sd card, and follow all the installation steps in the thread you downloaded it from.
You boot the sd build from the MAGLDR menu by chooding AD SD, but first you must set your sd directory. To do this, in the MAGLDR menu choose Services, BootSettings, then AD SD Dir, and choose the directory of your sd build.
Once you have flashed MAGLDR and CWM, you must hold down the Power button while booting up your phone to get to the MAGLDR menu.
Make sure you flash the right partition size for the ROM you'll be flashing to NAND
Click to expand...
Click to collapse
Oh, that's great..!!!
Thanks for the help, may be I missed that thread while searching..!!!
Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance
war_child said:
Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance
Click to expand...
Click to collapse
Your steps should be as follows
1. Download an SD Android ROM with MAGLDR contents as well
2. Rename folder to whatever you like but the startup.txt MUST have rel_path= same name as folder
3. Place folder on root of SD card
4. Go to Services>AD SD Dir>Desired folder (in MAGLDR)
5. Select 'Boot AD SD' (or whatever the Android SD boot option is)
Oh, and reactivating the thread is infinitely better then starting a new one
Dear Nigeldg,
already did all this.
I'm just wondering why the ICS SD build boots normal while every other tested SD build won't boot
war_child said:
Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance
Click to expand...
Click to collapse
Same here...
I think the SD ROM is not suitable to Recovery..
I've tried installing SD first, after that i install CWR, n try booting AD SD but got stuck on bootsplash..
war_child said:
Dear Nigeldg,
already did all this.
I'm just wondering why the ICS SD build boots normal while every other tested SD build won't boot
Click to expand...
Click to collapse
Hmm, seems odd. Which other builds have you tried?
Nigeldg said:
Hmm, seems odd. Which other builds have you tried?
Click to expand...
Click to collapse
have tried
http://forum.xda-developers.com/showthread.php?t=1256423
and
http://forum.xda-developers.com/showthread.php?t=957652
OK I think I found the solution in this thread:
http://forum.xda-developers.com/showthread.php?t=1375554
So I now switched to 3dak's Kernel on SD Build and it booted. Then tried to apply glitch fix from this post http://forum.xda-developers.com/showpost.php?p=19025914&postcount=12 I copied files via OI File Manager in system/lib/hw and system/lib/egl but now SD Android hangs at bootscreen.
Due to my postcount I can't as this in the respective thread, so does anyone can give a detailed installation description for this fix as my solution was obviously "suboptimal".
Hi there,
As I guess many here, moved from Win Mobile to Android SD. Then I moved to NAND.
In the SD Thread there are some very interesting ROMs which are SD and MAGLDR however they are shared on a folder Android to put in the SD and then run CLRCAD & HARET ...
My question is ... how can I move that SD structure into a NAND / MAGLDR version?
I've use ZIP files with CWM ...
THANKS.
POZI.
pozi said:
Hi there,
As I guess many here, moved from Win Mobile to Android SD. Then I moved to NAND.
In the SD Thread there are some very interesting ROMs which are SD and MAGLDR however they are shared on a folder Android to put in the SD and then run CLRCAD & HARET ...
My question is ... how can I move that SD structure into a NAND / MAGLDR version?
I've use ZIP files with CWM ...
THANKS.
POZI.
Click to expand...
Click to collapse
+1 I would also like to know this
Hi tdizzle404,
while not exactly what we were looking for, this info from 3dak
on http://forum.xda-developers.com/showthread.php?t=969661 help me in my understanding/learning ...
Approach two：MAGLDR V1.12（or V1.13）
1.Install DFT MAGLDR V1.12 or V1.13，for instance , MAGLDR V1.12
2.boot your handset and press the right POWER(RED) Key more than 5 seconds,
access aMAGLDR V1.2 Boot Menu,
use Volume Up/down key to Select 9.Services, use CALL(green) Key to confirm;
then select 1.BootSettings, select 1.Boot Source, Select 1.Android from SD, after confirmed the menu will jump to aMAGLDR V1.2 Boot Menu，
Select 9.Services again, then select 1.BootSettings,Select 3 AD SD Dir
se Volume Up/down key to Select MIUIROM directory，confirm it with CALL(green)key .after confirmed the menu will jump to aMAGLDR V1.2 Boot Menu
3.In aMAGLDR V1.2 Boot Menu，now Select 2.Boot AD SD, will start to run MIUI ROM from SDcard root/MIUIROM
or reboot your handset, the handset will automaticly boot MIUI ROM from sdcard root/MIUIROM.
Regards,
Pozi.
Hi guys, i just love ICS but i really need camera.
So i thinked that i can have this kind of dual boot!
But i really don't know how to..
davibs said:
Hi guys, i just love ICS but i really need camera.
So i thinked that i can have this kind of dual boot!
But i really don't know how to..
Click to expand...
Click to collapse
Flash HSPL2,radio higher than 2.09,MAGLDR 1.13.
NAND:
Flash CWM with correct partition
Then, flash rom by copying it to SD card then selecting install zip from sd card
SD:
Copy to SD card.
Then, go to magldr menu and select the folder where you stored your rom.
Go back and select BOOT AD SD
Hope I helped.......
By the way by HSPL2 he means HSPL2.08. Although I assume that you already have this flashed to NAND memory by the stuff you've said already And to select the SD thing go to (in MAGLDR menu) Services>AD SD Dir>folder with ROM in it.
really ? can haret.exe run with android on nand ?
fOxunO said:
really ? can haret.exe run with android on nand ?
Click to expand...
Click to collapse
It runs through MAGLDR, you can't run SD builds from Android or using CLK. You must have WinMo or MAGLDR (WP7 or Android on NAND).
Nigeldg said:
It runs through MAGLDR, you can't run SD builds from Android or using CLK. You must have WinMo or MAGLDR (WP7 or Android on NAND).
Click to expand...
Click to collapse
so , MAGLDR can install ROM in SDcard to SDcard it self ?
what option did you select or what number ini MAGLDR .
Hi,
I notice that some builds can be booted Via Magldr SD,
How do I do this,
I have Runny on NAND,
Do I just download the ROM add it to "Android folder" and hit "Boot AD SD" in MAGLDR?
Thanks,
Alex
Hi Alex,
I don’t think add ROM to Android folder is a good idea in order to not disturb your NAND build. Use different SD or rename your downloaded Android folder lets say Androidsd.
Steps for first boot:
1- Copy folder (Androidsd) to SD Card.
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "Androidsd" folder
7- Now select "BOOT AD SD" and wait boot
Next boot you can skip steps 3 to 6.
Have fun!
Petricanu said:
Hi Alex,
I don’t think add ROM to Android folder is a good idea in order to not disturb your NAND build. Use different SD or rename your downloaded Android folder lets say Androidsd.
Steps for first boot:
1- Copy folder (Androidsd) to SD Card.
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "Androidsd" folder
7- Now select "BOOT AD SD" and wait boot
Next boot you can skip steps 3 to 6.
Have fun!
Click to expand...
Click to collapse
When I select AD SD Dir the options are like "#@';"£$%"
they are completely random ?!?
alex.odell.2011 said:
When I select AD SD Dir the options are like "#@';"£$%"
they are completely random ?!?
Click to expand...
Click to collapse
thats fine but does it boot??
i copied nexus ics sd to the root but once i press call to enter to ad sd dir to choose the folder it goes back to the magldr menu and i dont access to sd card
alex.odell.2011 said:
When I select AD SD Dir the options are like "#@';"£$%"
they are completely random ?!?
Click to expand...
Click to collapse
I don't know what folders have you on ÿour SD card. You have to press vol down button till you reach the folder where you drop the ROM
Hi,
The folder is not listed, only these random names !?!
Does the ROM need to be zipped?
Thanks
alex.odell.2011 said:
Hi,
I notice that some builds can be booted Via Magldr SD,
How do I do this,
I have Runny on NAND,
Do I just download the ROM add it to "Android folder" and hit "Boot AD SD" in MAGLDR?
Thanks,
Alex
Click to expand...
Click to collapse
Hi,
I am to a newbie like you, see this thread it might be useful for you.
Also, see this post, you might find it useful.
Best Regards,
Vikas
vikas027 said:
Hi,
I am to a newbie like you, see this thread it might be useful for you.
Also, see this post, you might find it useful.
Best Regards,
Vikas
Click to expand...
Click to collapse
Good guides, but I already have NAND flashed
Just playing with sd card builds
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
May I ask a similar question? Can I have MAGLDR with winmo 6.5? All of the SD build of ICS I've been seeing only boots with MAGLDR, they don't have clrcad/haret.
ralfkof119 said:
May I ask a similar question? Can I have MAGLDR with winmo 6.5? All of the SD build of ICS I've been seeing only boots with MAGLDR, they don't have clrcad/haret.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1437463
This is a good build, it says magldr but there is a Claret and Haret in there also
You can install magldr to the phone please have HSPL and latest radio installed.
When you install magldr it WILL remove wm6.5 and you will have to re flash a wm6.5 rom to the phone, not the offical one as it will remove magldr,
You could always try flash ICS or WP7, there is a speed boost in nand
Thanks... So installing magldr will wipe my current winmo, and I'd have to flash a cooked winmo rom? Thanks for the info. I'd just like to clarify, so, I CAN have both magldr and winmo 6.5 both at the same time? And I can still switch between an android sd rom and the winmo 6.5?
ralfkof119 said:
Thanks... So installing magldr will wipe my current winmo, and I'd have to flash a cooked winmo rom? Thanks for the info. I'd just like to clarify, so, I CAN have both magldr and winmo 6.5 both at the same time? And I can still switch between an android sd rom and the winmo 6.5?
Click to expand...
Click to collapse
I do belive you can only dual boot WP7 and Android (Windows Phone 7 on NAND & Android on SD Card)
Not to sure about wm6.5 as I am not a dev,
You can defently dual boot wp7 and sd android though
http://www.addictivetips.com/mobile/what-is-magldr-and-how-to-install-and-use-it-on-htc-hd2/
ralfkof119 said:
Thanks... So installing magldr will wipe my current winmo, and I'd have to flash a cooked winmo rom? Thanks for the info. I'd just like to clarify, so, I CAN have both magldr and winmo 6.5 both at the same time? And I can still switch between an android sd rom and the winmo 6.5?
Click to expand...
Click to collapse
Just a thought, practicly all SD builds come with Claret and haret included, if not you can usually download some files or there included,
I think you should install NAND android if you like android or boot Haret and Claret,
sorry if i sound like a ****, I dont mean to be
And magldr WILL remove your WinMo
http://forum.xda-developers.com/showthread.php?t=1033537
Sorry for being misleading, you cannot dual boot WP6.5 and SD android via MAGLDR
:S
Awww... too bad. Can't let go of winmo 6.5 alex, a very important app is still sticking to this OS. ^_^
Thanks for the replies though. I'm happy with android SD for the moment. ^_^
Ok mate good stuff, most builds that say magldr/sd will have claret and haret others usually have a post to add in, good luck mate!
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Thanks for thanks :-D
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Just to bring this alive again,
Any ideas?
When in BOOT AD SD Dir I get random figures and not folders,
I am running TBD Runnymead with EXT4 partition,
Thanks,
For booting the ROM via MAGLDR follow the following options :
1.) Make sure its the SD build you have downloaded.
2.) Check the startup.txt file for "rel_path=foldername". If you named the folder with android as "Androidsd" then it should look like
"rel_path=Androidsd"
boot
3.) remove anything written after this like nand=1 or wince=1
4.) enter bootloader. When on magldr, go to Services > Boot Settings > AD SD Dir
select "Androidsd" as the directory.
5.) Boot AD SD
then u should be able to boot.
If you are not able to enter AD SD DIR tab, remove the memory card and reinsert.