Related
heloo , guys
I got problem on hd2 that my mobile does not run android
I tried alot of roms but the problem is stil hapend
the problem is on sd an nand android roms the device is stopped on htc word and the black background I wait about 1 hour with no booting
my device was got android befor this problem whitch was on sd and runs very good
I did soft rest and changed the rom to Energy.Leo.21916.Sense2.5.Cookie.2.0.GTX .Apr.29 after the problem happend but no hope
my Radio 2.10.50.28_2
please help me on it
You should check out the flashing android for noobs thread its in the sticky for nand android development it has step by step detailed instructions and it may help you figure out if you missed a step.
You should probably restore to stock windows mobile and start from scratch. Search for this thread "[GUIDE] Flashing Your First HD2 NAND Android Rom [For Newbs]". Sorry, I can't post link yet.
khaled_se said:
heloo , guys
I got problem on hd2 that my mobile does not run android
I tried alot of roms but the problem is stil hapend
the problem is on sd an nand android roms the device is stopped on htc word and the black background I wait about 1 hour with no booting
my device was got android befor this problem whitch was on sd and runs very good
I did soft rest and changed the rom to Energy.Leo.21916.Sense2.5.Cookie.2.0.GTX .Apr.29 after the problem happend but no hope
my Radio 2.10.50.28_2
please help me on it
Click to expand...
Click to collapse
first off you need to upgrade the radio to 2.15.50.14, do a task29 then flash MGLDR, then find the proper partition for Clockwork mod and flash that, and find a rom that has ongoing support by the dev, and flash that thru CWM, I was an Energy follower when I was in winmo, but NRG is too busy with winmo to keep his desire hd rom up to date, I honestly would recommend Pongster HyperDroid Gingerbread .
same here...
Check you SD card .
If use SD (haret.exe) .the first is very slow when there is not data.img
please wait it last 10min.
khaled_se said:
heloo , guys
I got problem on hd2 that my mobile does not run android
I tried alot of roms but the problem is stil hapend
the problem is on sd an nand android roms the device is stopped on htc word and the black background I wait about 1 hour with no booting
my device was got android befor this problem whitch was on sd and runs very good
I did soft rest and changed the rom to Energy.Leo.21916.Sense2.5.Cookie.2.0.GTX .Apr.29 after the problem happend but no hope
my Radio 2.10.50.28_2
please help me on it
Click to expand...
Click to collapse
someone mentioned a clean installation. and he is right. just perform a clean installation and everything would work as it should. http://www.enfeuman.com/2011/04/13/how-to-perform-a-clean-installation-on-nand-android-htc-hd2/ . here's an exact type of guide you are gonna need, buddy.
hi everyone, i don't know what i did wrong, previous firmware i'm running coredroid 1.6(android) working good and all. so i decide to update to v2.3 v2, for some reason after i did usb flasher it freeze, now i don't know how to get it back, so i end up install old WM energy rom, after 100% complete i do soft reset, and right here it hang on on Energy boot scrren, please help me, i don't know what to do now
phihung07 said:
hi everyone, i don't know what i did wrong, previous firmware i'm running coredroid 1.6(android) working good and all. so i decide to update to v2.3 v2, for some reason after i did usb flasher it freeze, now i don't know how to get it back, so i end up install old WM energy rom, after 100% complete i do soft reset, and right here it hang on on Energy boot scrren, please help me, i don't know what to do now
Click to expand...
Click to collapse
you can try sd card method...
Download stock Rom - shipped ( from htc web with hd2 serial number ) ... extract using 7-zip ( winrar etc) ... rename Ruu_Signed.nbh to LEOIMG.nbh ... format sd card ( fat32)... copy leoimh.nbh in sd card put it in hd2 go into bootloader and follow instruction on screen. you mos have at last 50% battery.
finally i'm not sure how it work, i think part of it because it getting warn and hot so it freeze, but now it working again running original WM, thank for replying
now i'm trying to reinstall android, after running DAF.exe with flasher it restart but when i run AD recovery it said Load done "1E Fatal Hit 1" then free, how can i fix it please
phihung07 said:
finally i'm not sure how it work, i think part of it because it getting warn and hot so it freeze, but now it working again running original WM, thank for replying.
Click to expand...
Click to collapse
thats because you have overheating issues ... for now you just visit this thread... i hope it helps.
http://forum.xda-developers.com/showthread.php?t=982454
phihung07 said:
now i'm trying to reinstall android, after running DAF.exe with flasher it restart but when i run AD recovery it said Load done "1E Fatal Hit 1" then free, how can i fix it please
Click to expand...
Click to collapse
just to be sure if thats nand - overheating issues try this: take out you battery, memory card and sim card put your phone in fridge ( put it first in a bag to be sure thats doesnt get wet ) for about 5-10 min and then try to boot android...
look like it the thermal issue i'm having, after put it close to air condition it workking again, thank you
Hello guys!
I have a major problem with NAND booting:
I can't boot any of the nand roms, neither with clK, nore with the MagLdr.
Tried and installed lots of nand roms. It does install them but they won't boot:
-in MagLdr it gets stucked on 123456 GO GO GO!
-in clK stucked on [260] -- suspend -- | when I fastboot-continue so it will force boot, I get [168210] ERROR: Invaled boot image header
Tried and installed a winmo6.5 rom and it works perfect.
Anyone encountered this problem before, or does somebody have any ideea how to recover my nand boot image? I really need my AD back
do you make the proper nand partition for the rom you want to flash?
visanciprian said:
Hello guys!
I have a major problem with NAND booting:
I can't boot any of the nand roms, neither with clK, nore with the MagLdr.
Tried and installed lots of nand roms. It does install them but they won't boot:
-in MagLdr it gets stucked on 123456 GO GO GO!
-in clK stucked on [260] -- suspend -- | when I fastboot-continue so it will force boot, I get [168210] ERROR: Invaled boot image header
Tried and installed a winmo6.5 rom and it works perfect.
Anyone encountered this problem before, or does somebody have any ideea how to recover my nand boot image? I really need my AD back
Click to expand...
Click to collapse
I have the same problem. I used this ROM:
http://forum.xda-developers.com/showthread.php?t=1434860
and 220 MB for system partition and 5MB for cache partition.
It's my wife's HD2 and it's the second i try to install Android on. The first was mine it's working perfectly with the same partition sizes. I have really no clue why is not working and my wife is looking for the crowbar right now...
PLEASE HELP!
^ try to redo everything & try the SD version of that ROM if it will boot.
just run it from magldr
Thank you for answering.
I tried to redo everything and got the same results. I'm thinking to go back to Win 6.5 to see if it works for me too, but I'm not sure how to do it... I'm thinking to wipe with Task29 and then to install Win 6.5. Will it work this way?
Many thanks!
EDIT: I've got the WWE 3.14... from here: http://forum.xda-developers.com/showthread.php?t=623283 and it's working perfectly. I can't believe how easy it was to install win 6.5 again... Just enter bootloader and run the exe... Too bad I can't have ICS on it, but I'm glad it's not bricked and it's working.
Thank you!
Kahless The Klingon said:
Thank you for answering.
I tried to redo everything and got the same results. I'm thinking to go back to Win 6.5 to see if it works for me too, but I'm not sure how to do it... I'm thinking to wipe with Task29 and then to install Win 6.5. Will it work this way?
Many thanks!
EDIT: I've got the WWE 3.14... from here: http://forum.xda-developers.com/showthread.php?t=623283 and it's working perfectly. I can't believe how easy it was to install win 6.5 again... Just enter bootloader and run the exe... Too bad I can't have ICS on it, but I'm glad it's not bricked and it's working.
Thank you!
Click to expand...
Click to collapse
Hey! saw you quoted me and since that was an old post, lots of things happened in this long time..
I found out what my problem was: bad blocks on NAND; so i contacted cedesmith-developer of cLK (since he's a romanian like us ) and tried to figure out with him.. we discovered that there were bad blocks on BOOT partition -> so I managed to solve it with the increase of the RECOVERY partition size (to 10MB) - so we actually moved the BOOT partition away from the bads..
worked for a while (especially with small-size system ROMs) then I wanted to get some cocky bigger ROMs and found out I have bads on the USERDATA partition aswell - the reason why, now, I'm getting some nasty spontaneous restarts..
at the moment I'm running an ICS NAND-build (after I ran some time an ICS SD-build) - but with this disadvantage of those restarts..
so, as a conclusion! if you want an ICS build and no headaches, go for a SD-version! with a 10-class SD you'll have no problems; it will run pretty smooth (search for smaller versions)
have a good evening!
Thank you very much!
I think I'll stay with win 6.5 at least for a while and I'll try an SD version of ICS, as you recommended. I have a class 6 SD now, but I will follow your advice and get a class 10 for this. On the other hand, as I said, it's my wife's phone, so she has the last word. I just wish she will never ask for an iPhone... That might be a divorce matter...
I hope this thread will help others too.
Thank you very much again!
Do try using the task29 to wipe your Mobiles internal memory. Be sure to wipe your sd card before this. Then dont install windows mobile 6.5. Flash MAGLDR right away. try installing the CWM and the rom.
Give a thanks if you found this helpful
Thank you, but I already tried that. With no results...
Kahless The Klingon said:
Thank you very much!
I think I'll stay with win 6.5 at least for a while and I'll try an SD version of ICS, as you recommended. I have a class 6 SD now, but I will follow your advice and get a class 10 for this. On the other hand, as I said, it's my wife's phone, so she has the last word. I just wish she will never ask for an iPhone... That might be a divorce matter...
I hope this thread will help others too.
Thank you very much again!
Click to expand...
Click to collapse
i thought it was decided that anything above a class 4 or 6 would not help and could actually be slower.
i think those fast cards are only for a camera which needs to write as fast as possible.
search here on xda for read write speeds.
get CrystalDiskMark (free) if you want to test the card speeds for yourself.
whatever you decide to get make sure its a good brand of card.
no need to spend money you dont need to
HI. so exactly wat happens? where do u go wrong. and wat happens on those screens? please do mention
Thanks gazzacbr. It's good to know that.
For adil1508: Well... It seems that I didn't do anything wrong... It seems that the phone has too many bad sectors and, after all, is kind of bricked anyway. Even with win 6.5 the phone keeps restarting every 15-20 minutes.
Kahless The Klingon said:
Thanks gazzacbr. It's good to know that.
For adil1508: Well... It seems that I didn't do anything wrong... It seems that the phone has too many bad sectors and, after all, is kind of bricked anyway. Even with win 6.5 the phone keeps restarting every 15-20 minutes.
Click to expand...
Click to collapse
Might be time to upgrade to a One X
Nigeldg said:
Might be time to upgrade to a One X
Click to expand...
Click to collapse
I would very much like that but it's much to expensive for me. Almost my salary for two months. Can't afford it.
Hey Guys,
at first, i hope this question isnt coming again and again, but i couldn't find anything helpful (for ME!) yet.
I have the HTC HD2 and got really tired of Windows Phone 6.5, so i changed it to Android. (Took me weeks to figure that out until it worked)
My current ROM:
Android 2.2 HTC Desire
Kernel 2.6.32.15 by cotulla
I use Magdlr and boot from NAND.
Superuser Elite is installed (bought it), but i cant update it - no matter what i do, it wont let me be root. I even tried the terminal, but when i type in "su" it directly says "permission denied". The problem is, my phone memory is low and i cant install apps directly on the sd-card (never found a guide how to get this automatically done).
What can i do??
i am rly desperate... the sad thing is, my boyfriend (yes, i am a girl) isnt much into smartphone stuff though he's got the new htc sensation - and also not into unix / linux systems - it seems all the guys i know besides only use an iPhone and google won't be my friend...
PLS PLS PLS HELP ME!
oh and sry for the bad language, grammar etc - i'm german ;-)
that is an old, out of date rom. It was the first proof of concept release when cotulla created magldr, so i would advise you to move to a different more recent rom. (We now have roms running android 2.3, 3 and even some early android 4 roms.)
There are very very few roms that flash in quite the same way, now, so you would need to learn about flashing CWM(clockwork, clockworkmod, clockwork recovery, it has several names)
Go get the 'android toolkit' from the android nand section, and then go read some of the guides from HERE
Mialeelay said:
Hey Guys,
at first, i hope this question isnt coming again and again, but i couldn't find anything helpful (for ME!) yet.
I have the HTC HD2 and got really tired of Windows Phone 6.5, so i changed it to Android. (Took me weeks to figure that out until it worked)
My current ROM:
Android 2.2 HTC Desire
Kernel 2.6.32.15 by cotulla
I use Magdlr and boot from NAND.
Superuser Elite is installed (bought it), but i cant update it - no matter what i do, it wont let me be root. I even tried the terminal, but when i type in "su" it directly says "permission denied". The problem is, my phone memory is low and i cant install apps directly on the sd-card (never found a guide how to get this automatically done).
What can i do??
i am rly desperate... the sad thing is, my boyfriend (yes, i am a girl) isnt much into smartphone stuff though he's got the new htc sensation - and also not into unix / linux systems - it seems all the guys i know besides only use an iPhone and google won't be my friend...
PLS PLS PLS HELP ME!
oh and sry for the bad language, grammar etc - i'm german ;-)
Click to expand...
Click to collapse
does it have app2sd built in the rom?
does the rom need sd-ext?
are you using tmobile or eu hd2?
MORE U EXPLAIN,MORE HELP U GET LOL
for a start,download link2sd from the market its free and easy to use,open the app,choose ext2,if a error msg appears,IGNORE IT for now and click on any app thats moveable u want to move to see if that works 1st
Old, outdated ROM with no root access. Use a newer one.
Yep its an old ROM. Don't worry though, you'll be able to redownload superuser on a new ROM. Just do what Sam says and it'll work fine. Surprised you even knew that you could flash android on to the hd2, because "you're a girl".
= What are you even doing asking whether or not you should root your phone on XDA?! =
ok guys thank you for the detailed informations!
i didnt know the rom is outdated - i guess installing a new one is the best idea in that case. i thought of that before, but it took me so long to get this one working so i wasn't in the mood for re-installing yet.
THANK YOU all, i will let you know if it worked - in case i cant fix this, would someone be able to help me via teamviewer?
Mialeelay said:
ok guys thank you for the detailed informations!
i didnt know the rom is outdated - i guess installing a new one is the best idea in that case. i thought of that before, but it took me so long to get this one working so i wasn't in the mood for re-installing yet.
THANK YOU all, i will let you know if it worked - in case i cant fix this, would someone be able to help me via teamviewer?
Click to expand...
Click to collapse
I'm pretty sire you won't need to give remote access, you'll be able to do it. All you'll need is the latest magldr 1. 13 (if I'm not mistaking)
Once you've got that, you just need to flash the clockwork mod daf file from usb flasher on magldr, then when you flash into clockwork its easy, just flash a zip file.
You can backup ROM's etc. from clockwork so its really convenient.
= What are you even doing asking whether or not you should root your phone on XDA?! =
I totally crashed it!!
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Start from the beggining by reflasing with the 3 colours on the screen, im no expert and I use magloader not clk, so try doing a fresh one with magloader and see how it goes
Mialeelay said:
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Click to expand...
Click to collapse
Plug the phone into the PC. Hold the back arrow key after turning the phone on to boot to fastboot . Then either try flashing Cwm via the NAND toolkit or do it manually through fastboot.
P. S. Did you install a radio?
Sent from my HD2 using XDA App
try to do it the way "typhoon" discribed it in his thread
http://forum.xda-developers.com/showthread.php?t=933951
under "Clean Install MAGLDR" with "Install tutorials"
(ich hab´s so gemacht und es funktionierte super)
thank you all, i will try the typhoon way out now..
Mialeelay said:
Hi Guys - it has happened
i totally crashed my hd2.
what i did:
i read the guides and got the newest android nand toolkit. so, i performed task29 and installed hspl, then clk. the problem now is: i cant do anything else! when i boot, i get this white clk screen where i can choose recovery normal or sboot. i cant repartition, my phone has no connection when i switch into the mode "with the 3 colours"... so - i can copy to sd card what i want, i can perform every task with the toolkit, even the backup rom for the original windows phone doesnt help because it says: "pls check that you're phone is connected via usb". my pc has the android usb drivers, it shows the device, all ok. i cant go into usb flasher because it seems, no magldr is installed - i tried and tried so many things and now i cant even perform a wipe.
seems i need to give you remote access anyway....
PLEASE! help me!
if you need screenshots i will upload them, just let me know.
Click to expand...
Click to collapse
Flash HSPL 3 pkg pick 2.0.8. HSPL, Than Task29 than use the toolkit and pick clk partition than when thats done hold back button and select recovery click install and follow the prompts. than hold home until you see recovery menu.
I DID IT
THANK YOU ALL!
I finally got it working
Hello..a friend of mine gave me a HD2 to fix, said it can't load anything. As I own a HD2, I took it just to see what's wrong. I own an Asian HD2, and everything is fine, I tried various ROMs..both Android and WinPhone, settled at Hyperdroid. Anyway, I have no idea where the heck the other HD2 is from, neither my friend has.
So, the phone had nothing in it and was stuck at the HTC logo, so I loaded into bootloader and saw HSPL 3.03. Then I changed it to 2.08 in order to install MIUI android. Then I installed MAGLDR. The issue occured when I went to install CWM. I loaded the 150M partition at USB Flasher, it was doing all fine until it became stuck at "reset now...!". So I just took the battery off, and tried to load into AD recovery. While it loads to 1, then it shows "fatal hit" error. I tried a lot of times including task 29, but it persists. Was the phone bricked from earlier ? Something like heating issues I assume. Anyway, I tried to install my phones stock WinMo rom to it from SD but it also gives error like failed, not allow etc. The both phone looks the same, under the battery hood of my phone, it's written HTC HD2 T5858. On the other one, nothing. Rest visuals are same.
So is there any way I can bring this anonymous HD2 to life ? I think it's almost dead but still if there's any way you people can come up with. I'm using a 2GB Sandisk MicroSD and the phone's S/N is HT01CNW04979 ; if that helps to sort out the phone's identity. Your help is much appreciated. Thanks
http://forum.xda-developers.com/showthread.php?t=1520439
this is a thread I created 3 days ago....me, another user, and now you...
our hd2s are going to diee D: stop joking, I (and toher guys) think that is hardware related....like in my case....but I don't really know what's the problem, just guessing....take a look to my post
True that. Only the difference is, it's happening to me during clockwork recovery installation. And I don't know where the heck is the phone from so that I can load custom WinMo lol. My own HD2 is doing just fine by the way.
http://imageshack.us/photo/my-images/263/87604378.jpg/
http://imageshack.us/photo/my-images/412/59177201.jpg/