Database Users

Post your voltage settings and your experience ...

Hi @all,
everyone is invited to post
1. ROM
2. Kernel
3. Kernel settings
4. UV settings
independently of ROM or Kernel used.
It might be a good starting point to compare other user´s experience.
Before using the settings postet in this thread please keep in mind that each device is different. Good settings for device A might produce freezes on device B.
So share your and enjoy other´s experience´s ...
here are my stable settings:
ROM: CheckROM RevoHD v6
Kernel: N.E.A.K. 1.4x
CPU Gorvernor: conservative (with all tweaks over CWM recovery enabled)
I/O Sched: sio
200 Mhz - 1200 Mhz
Voltages:
100 Mhz - 850 mV (... can´t go lower for testing with voltage control )
200 Mhz - 850 mV (... can´t go lower for testing with voltage control )
500 Mhz - 875 mV
800 Mhz - 975 mV
1000 Mhz - 1075 mV
1200 Mhz - 1175 mv
GPU settings:
Low: 133 Mhz - 800 mV
High: 133 Mhz - 800 mV
I am not a gamer and this settings are solid stable for my device. I use the phone mainly for (heavy) phone call´s (I know its old fashion ) and @home for surfing via WIFI. I enable my mobile data connection only when I need it.
This setting´s give me 3 - 4 days battery life.
I use lulzactive governor and vr I/O sched before and I feel NO difference in performance compared with the above settings (regarding scrolling through menus, starting apps ...), but the above settings gives me better battery.
Regards
Antonio
Update: I have to mention that I have the 2000 mAh Samsung battery.

OROM: Stock 2.3.5
Kernel: N.E.A.K 1.3.3.x
Voltage controls: All default.
100-800mhz
Lulzactive, VR
I usually get 1 & a half days battery, with an average of 7 hours screen time. The phone still runs beautifully while playing games and such so I have no problems in that category.
Edit:
Wifi on 80% of the time, a few hours of XDA. Skype on 100% while wifi is on. A few hours of games (dolphin, mc3, cut the rope, etc.), hours of Internet browsing, etc.
Sent from my GT-I9100 using XDA

A last note:
Posting your settings and your battery charge cycle, please also mention the way you using your phone during the day to make your post more comparable ...
have fun

Voltages
Using Checkrom V6, lulzactive gov. NEAK Kernel
1200mhz @ 1150mV
1000 @ 1050
800 @ 975
500 @ 875
200 @ 850
100 @ 825 (min freq is 200mhz anyway, so this freq is not used at all)
Rock solid, never a kernel panic/crash
My battery last 2 days with push Exchange connectivity, gmail pushing too, some gaming (no more than 1h x day), 1h voice calls x day, normal texting activity (30-50 daily text messages) and automatic brightness customized to be darker than default.
Battery last longer if you do not let fully discharge it (plug it at night if you can, no matter the charge left).

@Floodland
I usually don´t let the battery go down below 15% - 20%, then I start a new charge ... I break this rule only in case on an emergency when no charger is near by me
I´ll try your 1000 MHz and 1200 MHz voltage setting´s, will post back if they work on my phone

ROM:Custom Made DXKL3
Kernel:SiyahKernel 2.6.13
Governor:SIO,ondemand
Voltages:
100 Mhz - 800 mV
200 Mhz - 850 mV
500 Mhz - 900 mV (default)
800 Mhz - 950 mV
1000 Mhz - 1050 mV
1200 Mhz - 1150 mv
1400 Mhz - 1250 mV
1600 Mhz - 1350 mV
GPU settings:
1: 133 Mhz - 800 mV
2: 266 Mhz - 950 mV
3: 400 Mhz - 1100mV
battery life around 2 days with light usage, 8 hours for heavy usage.
at present 44% after 32 hours, with 2:15 hours display on, wifi on, 3G off

ROM: All GB ROMs
KERNEL: Siyah, NEAK and Redpill
SCHEDULER: Usually I keep it unchaged
GOVERNOR: ondemand or conservative
FREQUENCY: 200MHz- 800 or 1000 or 1200MHz
UV:
-CPU
200MHz - 800 mV
500MHz - 850 mV
800MHz - 950 mV
1000MHz-1050mV
1200MHz-1150 mV
FYI, I always use this cpu uv settings from 6 months ago -- since the first time I got my SGS2 undervolted while using ninphetamine kernel, to be exact. It always stable on my SGS2.
GPU:
133 MHz - 800 MHz
267 MHz - 950 MHz
Sent from my GT-I9100 using xda premium

New voltages ...
Hi @all,
here are my settings after new tests. The stability was testet by three sequential cycles of the N.E.A.K tester in each (fix) frequency:
100 Mhz - 850 mV
200 Mhz - 850 mV
500 Mhz - 850 mV
800 Mhz - 950 mV
1000 Mhz - 1050 mV
1200 Mhz - 1150 mv
Will test in next bettery cycle if they are stable in daily use, and report. Fell quite secure cause i´m not a heavy user...
Will test the settings starting tomorrow with the new N.E.A.K 1.4.1x kernel (simone told in his thread that the kernel should be released this afternoon).

ROM: Fatal1ty Extreme Edition (XWLA4)
Kernel: Red Pill 1.3
CPU Gorvernor: conservative
I/O Sched: sio
200 Mhz - 1200 Mhz
Voltages:
100 Mhz - 825 mV (Stable but not in use as it tends to lag a bit)
200 Mhz - 825 mV
500 Mhz - 875 mV
800 Mhz - 950 mV
1000 Mhz - 1025 mV
1200 Mhz - 1125 mv
1400 Mhz - 1225 mv (Stable but not in use as don't need it)
1500 Mhz - 1350 mv (Stable but not in use as don't need it)
GPU settings:
Low: 114 Mhz - 800 mV
High: 267 Mhz - 950 mV
I have 2 Exchange accounts on push, Gmail Push, hotmail every hour, and moderate use. Screen time Usually between 2-4 hours. Used to get 2 days, but getting epic wakelocks from google services since the Google Play update. so im trying work that out. at the moment of about 14 hours i have 2hours screen time and 34% battery left.

Red pill rules
ROM: Checkrom revo hd V6 (XWLA4)
Kernel: Red Pill 1.3
CPU Gorvernor: Hyper
I/O Sched: N/A
200 Mhz - 1200 Mhz
Voltages:
100 Mhz - 900 mV
200 Mhz - 900 mV
500 Mhz - 950 mV
800 Mhz - 1000 mV
1000 Mhz - 1100 mV
1200 Mhz - 1200 mv
1400 Mhz - N/A
1500 Mhz - N/A
I USED THE KERNEL Neak BUT I'll take the RED PILL IS SIMPLY THE BEST BUT THE BEST OF SIYAH MORE FLUID AND ENHANCED THIS LAST

TWO CORES ARE ENABLED
did a test for each freq and volt with STABILITY TEST app.
ROM: cognition 1.51
Kernel: Siyah 2.6.14
I/O Schrduler: sio
CPU Gorvernor: smartassV2
CPU:
100 Mhz - 1600 Mhz
Voltages:
100 Mhz - 850 mV
200 Mhz - 850 mV
500 Mhz - 875 mV
800 Mhz - 950 mV
1000 Mhz - 1050 mV
1200 Mhz - 1200 mv
1400 Mhz - 1275
1600 Mhz - 1400 mv
GPU:
100Mhz-800mv
267Mhz-950mV
normally working from 100mhz-800mhz.
i managed to get lower mv for the cpu and stable but it was the limit. so i added 25mv more for more stable results.

Who dares trying my extreme UV values ? ​
My UV stable table (Mhz/mA) :
1200 (1125) | 1000 (1025) | 800 (950) | 500 (850) | 200 (800) | 100 (800)
Noop + On demand.
Thanks to NEAK for its magic on my S2

ROM: CM9
Kernel: NEAK 2.0.2x
I/O Schrduler: vr
CPU Gorvernor: ondemand
CPU:
200 Mhz - 1000 Mhz
Voltages:
200 Mhz - 850 mV
500 Mhz - 900 mV
800 Mhz - 950 mV
1000 Mhz - 1050 mV
GPU:
133Mhz-800mv
166Mhz-800mV
Works perfect for me. Always heavy usage and get nearly 24hours with standard battery. Screen on time 4 hours. With siyah I had nearly the half of the uptime.
Wifi always on. Sync on. I mean this is what it was made for
-sent from sgs2 tapatalk

Ics stable voltages UV/OC

HI
since in ICS firmwares we can talk about different cpu voltages than gb and i think it's a hot subject mostly in kernel threads i believe i can start this thread because many are interested about this. i use speedmod kernel k3-7 and i can use only tegrak overclock ultimate to change voltages. my stable config is:
200 mhz- 825 mv
500 mhz-925 mv
800 mhz-975 mv
1000 mhz-1050 mv
1200 mhz-1150 mv
with this config i get no freeze or sod. so please post your stable config too.
new info:
-seems that i can't go below 925 mv at 500 mhz
-i will see how the battery life will go with these voltages and i will post some pictures because i am interested in undervolting for battery life.
i also saw a post in neak ics kernel where a user had 7 h and 32 minutes display time.

pissyhun said:
HI
since in ICS firmwares we can talk about different cpu voltages than gb and i think it's a hot subject mostly in kernel threads i believe i can start this thread because many are interested about this. i use speedmod kernel k3-7 and i can use only tegrak overclock ultimate to change voltages. my stable config is:
200 mhz- 825 mv
500 mhz-925 mv
800 mhz-975 mv
1000 mhz-1050 mv
1200 mhz-1125 mv
with this config i get no freeze or sod. so please post your stable config too.
Click to expand...
Click to collapse
What were your gb values?
Sent from my GT-I9100 using Tapatalk

Yes, I don't see the values changing with ICS.

I should pay some more time on it... 825mV for 200MHz so amazing

hi
it seems if i go down 925 mV for 500 mhz i got freeze.

Hrithan2020 said:
What were your gb values?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
hi
theese were my values in gb roms:
1200mhz - 1150mv (stock = 1250mv)
1000mhz - 1050mv (stock = 1150mv)
800mhz - 950mv (stock = 1050mv)
500mhz - 875mv (stock = 975mv)
200mhz - 850mv (stock = 975mv)
and i used phenomenal 4.0 extreme without freeze or sod.
my phone was produced in octomber 2011.

pissyhun said:
hi
theese were my values in gb roms:
1200mhz - 1150mv (stock = 1250mv)
1000mhz - 1050mv (stock = 1150mv)
800mhz - 950mv (stock = 1050mv)
500mhz - 875mv (stock = 975mv)
200mhz - 850mv (stock = 975mv)
and i used phenomenal 4.0 extreme without freeze or sod.
my phone was produced in octomber 2011.
Click to expand...
Click to collapse
Strange.. Are you sure, that you had set the lowest possible values for GB?
For me, it looks as if I would have to increase the voltages a bit in ICS.
Haven't looked too much into it.. [running CM9 with Siyah rc3.. both beta.. need work]

GB voltage:
1200 MHz - 1150 mv
1000 MHz - 1050 mv
800 MHz - 950 mv
500 MHz - 850 mv
200 MHz - 800 mv
Always stable for me. I always use this voltage settings until I update my phone into ICS.
ICS voltage:
1200 MHz - 1150 mv
1000 MHz - 1050 mv
800 MHz - 950 mv
500 MHz - 925 mv
200 MHz - 800 mv
It seems I can't set the voltage for 500 MHz lower anymore. Otherwise the phone will freeze.
Sent from my GT-I9100 using xda premium

so far so good.
they seem to be working for me as well.
using Siyah latest kernel and Hydrog3n rom.

hi
some users reported theese voltages to be stable:
200-800 mv
500 - 925 mv
800 - 950 mv
1000 - 1050 mv
1200 - 1125 mV

pissyhun said:
hi
it seems if i go down 925 mV for 500 mhz i got freeze.
Click to expand...
Click to collapse
Hahaha, Are you really sure ?
Who dares trying my extreme UV​ values ?​
My UV stable table (Mhz/mA) :
1200 (1125) | 1000 (1025) | 800 (950) | 500 (900) | 200 (800) | 100 (800)
Noop + On demand.
Thanks to NEAK for its magic on my S2

Hi
Changed kernel-neak and i use now
850 900 950 1025 1125 mv
Sent from my GT-I9100 using XDA

well this are my settings:
Min/max: 100 mHz-1200mHz
vr - smartassV2
100 - 825
200 - 875
500 - 925
800 - 975
1000 - 1050
1200 - 1150
Siyah 3.0
i tryied to go a lil bit under this settings, but then i had some freezes. i think 500 and 800 makes the most problems.

on ics i have to pull up a bit the voltages that were stable for me on gb, but the annoying thing is that i can´t go less than 925mv for 500mhz step, i get freezes and on gb i was on 875

I'm running 200Mhz 775mV stable
800Mhz 925mV
But cant get stable at 1600Mhz, I get freeze on anything between 1325-1500mV
Anyone can?

This thread is kind of useless .. every phone supports different UV !
Sent from my GT-I9100 using xda premium

I dont think so
Sent from my GT-I9100 using XDA

i am confused cause all tht magic an other tweaks really dint work for me,i tried all but sometimes the phone runs jus for few mins and right now my phone is fully loaded like 400+apps an iam downloading more day by day too check how much sgs2 will handle.an yes i think every phone is diff...

Jodelaplaya said:
This thread is kind of useless .. every phone supports different UV !
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
pissyhun said:
I dont think so
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Well, each phone has different tolerance to Undervolting. I for example can not go lower then these values:
200MHz - 900/925mV
500MHz - 950/975mV
800MHz - 1050mV
1000MHz - 1100-1150mV
1200MHz - 1250mV
If I go lower then 1250mV for 1200MHz, I will get freezes (if not instant then when browsing the net or something heavy). As you can see my values are not so "extreme", other people can undervolt much more.
There has been one succesfull thread of this type from Geko, it's called MagicConifg (if you click on Undervolting in my signature you will be taken there). He tested for months which UV settings would work for 99% of the people. I was one of the few people that couldn't handle his config
Anyway, I don't say that this thread is totally useless. Discussing UV settings can be helpfull for others which are new to Undervolting. But for me the UV settings have stayed the same as on GB, don't know if it's so different UV'ing on GB and on ICS.
As long as people realise: the settings that work for somebody may not work on your own phone! A lot of people in this thread undervolt heavy and there is a big chance your own phone will freeze (and if you set it on boot and can't remove them anymore, that means reflashing your rom...). So be carefull

Cm9 rom/kernal
200 @ not used
500 @ 825 mV
800 @ 950 mV
1000 @ 1050 mV
1200 @ 1150 mV

Undervolting discussion

I have read very conflicting things about undervolting; some say it doesn't do much at all, others say it's worth the effort. What most can agree on though, is that it depends on the phone, so I want to get some input to see if people have had success with it on the Fascinate. I tried a mild undervolt today and while I didn't notice much change with the screen on (while using it) I did notice it held a lot better charge while in stand-by. My settings as of right now are:
1200 MHz - 1300mV (-50)
1000 MHz - 1225mV (-50)
800 MHz - 1150mV (-50)
400 MHz - 950mV (-100)
200 MHz - 850mV (-100)
100 MHz - 850mV (-100)

I have been running the over / under volts for a while on different test builds with really good results...
I did do a live o/c for a while but have settled on normal o/c
My over / under settings as of right now are:
1200 mhz O/C
100 mhz minimum
1200 MHz - 1400mV (+50)
1000 MHz - 1325mV (+50)
800 MHz - 1250mV (+50)
400 MHz - 1025mV (-25)
200 MHz - 900mV (-50)
100 MHz - 875mV (-75)
------------------------
------------------------
But i have been wanting to test some other stuff too
I figured i would test this::
And see how it runs
1200 MHz - 1350mV (+00)
1000 MHz - 1275mV (+00)
800 MHz - 1200mV (+00)
400 MHz - 1000mV (-50)
200 MHz - 850mV (-100)
100 MHz - 850mV (-100)
sent from my swagger
aokp 10/22 test / devil kernel

Just curious, but what was your reasoning to raise the voltage? It seems like that would just be a battery drain because at those steps the stock voltage should be more than enough for stability.
I also don't Live OC but that's only because my phone will crash at 110% Live OC so I don't see the point in doing 105% Live OC... so I just do what you do and have 1200 MHz regular OC now

Crawshayi said:
Just curious, but what was your reasoning to raise the voltage? It seems like that would just be a battery drain because at those steps the stock voltage should be more than enough for stability.
I also don't Live OC but that's only because my phone will crash at 110% Live OC so I don't see the point in doing 105% Live OC... so I just do what you do and have 1200 MHz regular OC now
Click to expand...
Click to collapse
Just came from all the reading in the original devil ics thread...
Somebody 'Crack' ran these settings...
http://forum.xda-developers.com/showthread.php?t=1699141
It has so many great answers and Such great info,,, just realized i need to go back and read some more,,,
Think ... devil idle .... :thumbup:
sent from my swagger
aokp 10/22 test / devil kernel

From all the roms/kernels I ever ran on my fascinate undervolting did help slightly. It seems if I remember correctly that pulling -50uv across the board helped with battery life without decreasing stability. Anymore than that is when the random reboots started. Also disabling the 100mhz step made a big difference with SOD's and reboots.

Crawshayi said:
Just curious, but what was your reasoning to raise the voltage? It seems like that would just be a battery drain because at those steps the stock voltage should be more than enough for stability.
I also don't Live OC but that's only because my phone will crash at 110% Live OC so I don't see the point in doing 105% Live OC... so I just do what you do and have 1200 MHz regular OC now
Click to expand...
Click to collapse
You can do both a live oc (fsb overclock), and a regular overclock (multiplier overclock) at the same time. I use 110 live oc and a 200 mhz regular overclock giving me a total of 1320mhz. Set your live oc then use rom controlor whatever to do your regular overclock on top of it.

[Q] What is Best UnderVolt Table for Power Save

iam want to know what is the best Note 3 Eynos UV Table for Power Save and best Battery
iam using GoodHannry Kernel V3-A
may you share ur Table to find out best Battery and Power Saving and say ur Kernel Version
My Table is Very Stable
For CA7
250 Mhz - 825
300 Mhz - 825
350 Mhz - 862
400 Mhz - 900
450 Mhz - 937
500 Mhz - 975
550 Mhz - 1025
600 Mhz - 1075
650 Mhz - 1137
For CA15
800 Mhz - 750
900 Mhz - 775
1000 Mhz 825
1100 Mhz - 850
1200 Mhz - 875
1300 Mhz - 900
1400 Mhz - 925
1500 Mhz - 950
1600 Mhz - 987
1700 Mhz - 1025
1800 Mhz - 1087
1900 Mhz - 1137

[Not a GUIDE, just a tribute] How I undervolted my Note 8.0

Hi all,
I've made a video about undervolting following the guide that omniwolf made.
It's nothing more than me talking (too much) about it and actually doing it, I'm really not adding anything to the guide itself besides the fact that you can watch me making a fool of myself, think that if I can do it, anybody can... So it's more an encouragement than anything else
The voltages I got are:
100 MHz - 675 mV
200 MHz - 700 mV
300 MHz - 725 mV
400 MHz - 750 mV
500 MHz - 800 mV
600 MHz - 825 mV
700 MHz - 850 mV
800 MHz - 900 mV
900 MHz - 925 mV
1000 MHz - 950 mV
1.1 GHz - 950 mV
1.2 GHz - 950 mV
1.3 GHz - 1000 mV
1.4 GHz - 1050 mV
1.5 GHz - 1075 mV
1.6 GHz - 1150 mV
Please don't just copy them, every CPU is different and they may not work for you. I also raised them all by 25 mV to avoid instabilities.
I don't have results and probably I will never have them... So I can't actually tell how much this affects battery life and temperature. I'm not convinced it makes a lot of sense to undervolt a tablet, since the screen is pretty much going to be the main drainer anyway, that's why I'm not focusing on collecting data to support the usefulness of the process
Did anyone else try undervolting the Note 8 (old thread about it here)? Also I'd be glad to hear the opinion of someone who's more qualified than me (basically anybody) about the subject in general and about undervolting this specific device
Cheers