Database Users

[Q] Will this work for our WF?

Found this thread on the HTC Hero section for it's open GL will this work for our wildfire?
http://forum.xda-developers.com/showthread.php?t=899801

Yea I flashed it, noticed an improvement in playing angry birds...i think.
Sent from my HTC Wildfire using XDA App

Will it work on cm7 nightlies kevin?
Sent from my HTC Wildfire using XDA App

Yeah
Sent from my HTC Wildfire using XDA App

Yes it works with just about every ROM, but, in my view, I can't see any benefit. (I dont play Angry Birds, and, the rest of the games and LWP's don't show any benefit).

How do you do this?
Just flash it like a rom?

Well, that's what I initially did. Flash the ZIP in Post #49 in that thread. But, on reading that complete thread, I guess you have to edit the build.prop file in /system (Using Root Explorer / ADB Push Pull).
However, this is where I cant get it to work. WHenever I add the 2 lines in Root Explorer and Save Changes, the phone reboots. If I use ADB, even after pushing, when I check the same file using build.prop, no changes are visible, (The opengles.version automatically reverts back to 65536 and the line which enabled hardware acceleration of the UI is gone) and, ASI only shows OpenGL 1.0 due to this
Well, I have no idea what I am doing wrong, will try it out again and see..

I'm a newb with this.
Could someone possibly make a bit more explained guide?

Very basic guide:
* Get Root Explorer or any other file manager that can show the root folders
* Open Root Explorer, change permissions on top to R/W (Be very careful after that. Dont delete anything!)
* Locate the file build.prop under /system
* Long Press the file, Select Edit with Text Editor
* Updated: (ADB Commands Copy - Pasted from another post by kevin2516. Thanks mate )
*Make sure ADB is installed on your system and it is working. There are many guides available to install ADB, so I wont be going into that.
*Start Command Prompt (cmd), Browse to your "Tools" folder into your SDK
*Use the ADB Pull Command adb pull /system/build.prop
*This will now be saved to your tools folder. Edit is using Wordpad / Notepad++ (Not Notepad) as follows:
*Locate a line which starts with dalvik. (The first one, there are 3 of them)
Add the following 2 lines before that:
debug.sf.hw=1
ro.opengles.version=65537
* Save it.
* Push it back to System using the ADB Push Command: adb push build.prop /system/build.prop
* Reboot ADB using the adb reboot command
* Then, grab the Flashable Zip in that thread from Post #48
* Flash it as normal
Done.
Check whether it is implemented or not by going to Android System Info > System Tab > OpenGL. Here, there are 2 OpenGL versions. The first line should say 1.1, and the second should say OpenGL 1.0 ES.

With S-On you cannot change the systemfile directly I think. Thats the reason why your system not keep the change. I have write by myself a little install zip and flash it with nandroid and it works. the zip only works with wildpuzzlerom v0.8 and you can find in the thread for wpr0.8.

bgx said:
With S-On you cannot change the systemfile directly I think. Thats the reason why your system not keep the change. I have write by myself a little install zip and flash it with nandroid and it works. the zip only works with wildpuzzlerom v0.8 and you can find in the thread for wpr0.8.
Click to expand...
Click to collapse
Well, I took your flashable ZIP, removed the build.prop it contained, and replaced it with the build.prop of CM7 Nightly 2. Then, I tried flashing it, still no change.
Now, I have no idea whether I am 'allowed' to change flashable ZIP's like that or not, but, from what it is looking like, I am still unable to get this working on CM7NB2. I'll probably try making a flashable ZIP from scratch later as I get time.

bgx said:
I have write by myself a little install zip and flash it with nandroid and it works. the zip only works with wildpuzzlerom v0.8 and you can find in the thread for wpr0.8.
Click to expand...
Click to collapse
If it's simple enough, it would be nice if you could tell how to do a flashable zip (or yourself make a one suitable for CM6/7 ). I just want to test these libraries on CM7, any help is appreciated
Don't expect nothing special, I'm not a dev!

3xeno said:
Very basic guide:
* Get Root Explorer or any other file manager that can show the root folders
* Open Root Explorer, change permissions on top to R/W (Be very careful after that. Dont delete anything!)
* Locate the file build.prop under /system
* Long Press the file, Select Edit with Text Editor
* Then, locate a line which starts with dalvik. (The first one, there are 3 of them)
* Add the following 2 lines before that:
debug.sf.hw=1
ro.opengles.version=65537
* Save and Exit
* Then, grab the Flashable Zip in that thread from Post #48
* Flash it as normal
Done.
Check whether it is implemented or not by going to Android System Info > System Tab > OpenGL. Here, there are 2 OpenGL versions. The first line should say 1.1, and the second should say OpenGL 1.0 ES.
Click to expand...
Click to collapse
But it's not working for CM7?
Where can i find FLashable zip? I don't understand where is post #48
Even if i find, i have read, that it's not working? Or working?

You can find the OpenGLES 1.1 Flashable ZIP in Post #48 of this thread:
http://forum.xda-developers.com/showthread.php?t=899801
I have updated my post since Root Explorer method doesnt work (No S-OFF).

3xeno said:
You can find the OpenGLES 1.1 Flashable ZIP in Post #48 of this thread:
http://forum.xda-developers.com/showthread.php?t=899801
I have updated my post since Root Explorer method doesnt work (No S-OFF).
Click to expand...
Click to collapse
You wrote : last edit: I didn't notice any difference, much like the test ran above. I'm going to revert until more knowledgeable people look at this.
if it is like you saying, then i dont have point to that **** too.
i think devs who makes this rom should instal in rom everything what can increase perfomance. so im waiting for the rom with all those things instaled.
will it happen someday?:/

vilks said:
You wrote : last edit: I didn't notice any difference, much like the test ran above. I'm going to revert until more knowledgeable people look at this.
if it is like you saying, then i dont have point to that **** too.
i think devs who makes this rom should instal in rom everything what can increase perfomance. so im waiting for the rom with all those things instaled.
will it happen someday?:/
Click to expand...
Click to collapse
Which is exactly what I said in the CM7 thread. No one here has till date, found verifiable gains, with using OpenGL on the Wildfire. Everyone reports the same thing, that there is no or absolutely negligible (Which I think is just a mind thing) change in gaming / intensive applications performance.
If you are looking for ROM's wit inbuilt OpenGLES Support, WildPuzzle has a flashable ZIP, and DS and DK Roms provides it inbuilt in its latest version. For the others, the manual method has to be followed.

[Q] Need Best Rom Fully Stable

Hey Guys M new to this forum (Not in flashing) so can u guys please Suggest me an awesome Rom
I already Rooted my Wildfire 2.2.1 S-off Alpharev ... I forgot the hboot version i guess ... its something like 1.0.0.2 (something like that)
M currently Using Cm7 ... (7.1 rc buzz)
Plz suggest gr8 Roms ...
Using the Latest Clockwork .. .thanx
Sorry if the topic is Re-Made ... I haven't seen any topics like this

I am using JokerDroid 4.2... I never used a better Froyo Scene ROM! No laggs, no bootloops, not a single problem and it runs stable.
Have a try and you will see

eversearcher said:
I am using JokerDroid 4.2... I never used a better Froyo Scene ROM! No laggs, no bootloops, not a single problem and it runs stable.
Have a try and you will see
Click to expand...
Click to collapse
Is dat rom using edify sricpts?

For every rom that isn't gingerbread (2.3) you need to use recovery 2.5.

music.soul said:
Is dat rom using edify sricpts?
Click to expand...
Click to collapse
No, Amend. Use Clockworkmod from within ROM Manager for getting CWM 2.5 (This is over and above your current 3.x), else use Fastboot to remove your current 3.x and install 2.5 in its place.

cn all the apps move to the sd card?????????

you can try out my rom

3xeno said:
No, Amend. Use Clockworkmod from within ROM Manager for getting CWM 2.5 (This is over and above your current 3.x), else use Fastboot to remove your current 3.x and install 2.5 in its place.
Click to expand...
Click to collapse
Can U just give me bit description ... with stepss plzz
Thanx For Replying

In CM7, Open ROM Manager (Or, if you are not in CM7, then download the app called ROM MAnager from the Market)
- Then Select Install Clockworkmod Recovery. This will install v2.5 on the SDCard
- Select Reboot into Recovery from ROM Manager
- This will take you to Clockworkmod 2.5, then you can install this ROM.
By following this, you get to keep both recoveries, 2.5 (Select Reboot into Recovery from ROM Manager App) and 3.x (Select Reboot into Recovery from the Phone-Switch-Off Menu)

3xeno said:
In CM7, Open ROM Manager (Or, if you are not in CM7, then download the app called ROM MAnager from the Market)
- Then Select Install Clockworkmod Recovery. This will install v2.5 on the SDCard
- Select Reboot into Recovery from ROM Manager
- This will take you to Clockworkmod 2.5, then you can install this ROM.
By following this, you get to keep both recoveries, 2.5 (Select Reboot into Recovery from ROM Manager App) and 3.x (Select Reboot into Recovery from the Phone-Switch-Off Menu)
Click to expand...
Click to collapse
Thats Just Awesome Bro ))))))))
Thanx a ton!! ... A bunch of Roses coming soon at your place ( LOL )

So Guys ...
Again the same question ...
except cyanogen 7 ...
wildpuzzle ... which is gr8

eversearcher said:
I am using JokerDroid 4.2... I never used a better Froyo Scene ROM! No laggs, no bootloops, not a single problem and it runs stable.
Have a try and you will see
Click to expand...
Click to collapse
+1 for jokerdroid, after using CM7 for 1 month. I cant live without sense dialer and contact manager, and jokerdroid is really fast and stable (I got 3.3mflops without JIT).

+1 JokerDroid 4.2 i have been using cm7 stable and nightlys for the last 2-3 months they are fast but had to many little bugs that pissed me off lol , never really used sense as had the phone for a couple of hours and rooted it and flashed cm7,JokerDroid 4.2= fast and very stable so far so for me this is the best rom i have used to date

that`s good !
yep ! one of the best roms that i`ve ever tried ! jokerdroid 4.2 ! so far so good since a week ago !

I tested CM7, but I missed some features from Sense. So I decide to use JokersDroid, but it hasn't got "insecure boot" (no rw mount). After everything I decided to use MoDaCo (it has busybox, so usefull). I replaced kernel to nfinity MC4 from johnseen99 (so I can OC buzz), removed some annoying apps, add JAVA and Livewallpapers from DK Rom, unlocked GoogleMaps and switched to GoLauncher EX.
I'm happy now

wzearsdcx said:
I tested CM7, but I missed some features from Sense. So I decide to use JokersDroid, but it hasn't got "insecure boot" (no rw mount). After everything I decided to use MoDaCo (it has busybox, so usefull). I replaced kernel to nfinity MC4 from johnseen99 (so I can OC buzz), removed some annoying apps, add JAVA and Livewallpapers from DK Rom, unlocked GoogleMaps and switched to GoLauncher EX.
I'm happy now
Click to expand...
Click to collapse
Can U share the Zip file with Us plz?

music.soul said:
Can U share the Zip file with Us plz?
Click to expand...
Click to collapse
There is no zip
1. I flashed MoDaCo from here: http://forum.xda-developers.com/showthread.php?t=867937
2. Via recovery switched kernel to: http://forum.xda-developers.com/attachment.php?attachmentid=591094&d=1304950233
3. JAVA - unpack DK ROM - from /system/app copy Jbed.apk and libjbedvm.so from /system/lib -> via adb push them to similar folders. In /system/app are two files with "live" in name - copy them too (livewallpapers doesn't work in Sense)
4. Wifi indicator and Wavesecure removed via Titanium backup
5. Maps: http://mobileplanet-waryam.blogspot.com/2011/07/google-maps-v562-mod-with-world.html
6. Go Launcher - via Market
If some day I'd learn how to prepare full custom ROM - I''ll do it

wzearsdcx said:
... I decide to use JokersDroid, but it hasn't got "insecure boot" (no rw mount).
Click to expand...
Click to collapse
What is this for? To mount system partition with r/w right?

louiscypherbr said:
What is this for? To mount system partition with r/w right?
Click to expand...
Click to collapse
Right. I need that to replace maps, del apps, insert /etc/hosts file and the rest. If there is another way - I'm listennig

wzearsdcx said:
Right. I need that to replace maps, del apps, insert /etc/hosts file and the rest. If there is another way - I'm listennig
Click to expand...
Click to collapse
Ok, there is two other ways to make it: using rootexplorer to remount /system partition with R/W, or adb shell to remount it manually (adb shell, su, and mount -o rw,remount -t yaffs2 /dev/block/mtdblock1 /system)
As I have rootexplorer, even when I have to adb push something, I just open /system in rootexplorer and press "mount r/w" button.
Ed.:
I cant remember the correct number of mtdblock. You can check it with df command on shell, and it will give you all mounted partitions

[OBSOLETE] Great Combo For Galaxy Ace

This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Not sure which is the best ROM, it's relative. So far, for stock ROM lovers you can use Blackhawk ROM by ketut.kumajaya
Best Kernel
CF-Root for S5830. I have no comments. An amazing kernel.
Best RAM Tweak (for stock ROMs without CF-Root only)
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Best Animation Tweak (will smoothen animations on stock XXKPH ROM and activate CRT animation on coderom)
Not sure who share this tutorial, but you will get smooth animations after you have applied this tweak. Using Root Explorer, mount /system/ to RW, edit build.prop, find debug.hw, add a hash "#" before it. Save and reboot. Original post here.
For the best result: make sure you have activate a2sd and convert filesystem to ext4 using ext4 Manager (available through CF-Root) and do NOT apply Conservative Gov (when applied, it will save battery life but will slow down performance)
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.

I was gonna install coderom for the reboot button feature (on phone options), but the link was down.

Please add this: enabling crt on gingerbread rom by adding a hash (#) to debug.hw in build.prop smoothen everything a lot, especially popups.
XDA ♥

- XXKPH
- Easy Deodex + Root (XDA)
- Zipalign on boot setting from A2SD GUI
- CF -Root updated to b78
- update to CWM 4.0.0.9
- Internal memory converted to ext 4 (by ext4 manager)
- set tweaks => default (no checked list)

thats great combine! i've used this...
very smoothly guys...

thanks,just flash up the RAM optimizer with CWM~

fla.sh said:
This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Coderom.NexusAce by code28h4p. The original download link was removed by Moderator because it's contains warez.
Further instructions: How to flash coderom.nexusace and How to setup a2sd with coderom.nexusace.
Best Kernel
CF-Root for S5830. Original post (in Indonesian) here.
Best RAM Tweak
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.
Click to expand...
Click to collapse
Hi fla.sh,
I don't think anyone will go wrong when they have great combo like this. I have all of them in my SGA. (Of course with CRT as mentioned by consegregate)
Now my ace runs very smoothly.

Hey, if I apply the ram optimization... how do I get to the original configuration? A flash of the kph rom (the one i have) would be enough?

I'd say just deleting the script file should be enough.
And lol that's exactly what I have on my Ace. Plus the CRT animation.
Tap-a-talked from my Galaxy Ace

Diliban said:
Hi fla.sh,
I don't think anyone will go wrong when they have great combo like this. I have all of them in my SGA. (Of course with CRT as mentioned by consegregate)
Now my ace runs very smoothly.
Click to expand...
Click to collapse
Hi,
I have this question for you... Do I need to install everything in the post CF-Root for S5830 like CF root manager, Tweak, EXT4 Manager etc., or just the below mentioned part is enough?
I just flashed this part to my SG Ace.
Instructions (long)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip CF-Root-S5830-v3.7-b78.zip
- (USB) Disconnect your phone from your computer
- Start ODIN v4.38
- Click the OPS button, and select Cooper_v1.0.ops
- Click the PDA button, and select CODE_S5830XXKPH_CL260130_REV03-CF-Root-v3.7-b78.tar.md5
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)
I tried Quardant after installing this Kernel which gave me 1043 (sdcard class 2) which is as equal to what I got before without this kernel. What is your thought?

Quadrant won't show any difference until you convert your system to ext with the exr4 manager.
Tap-a-talked from my Galaxy Ace

Hi mate, any chance of a pm maybe ?with the bit's to try this rom out? can't find dou to link being removed. thanks.

Added CRT animation tweak

QNBT said:
I was gonna install coderom for the reboot button feature (on phone options), but the link was down.
Kind enough to PM it to me?
Thanks in advance!
Google it, type "coderom nexus" first result its the rom 4shared download.
Click to expand...
Click to collapse

CF-Root have all Juwe's RAM script options with different values​​. If you don't mind, I could write a CWM update package to set CF-Root using JRS value and enabling animation CRT ("setprop build.sf.hw 0").

ketut.kumajaya said:
CF-Root have all Juwe's RAM script options with different values​​. If you don't mind, I could write a CWM update package to set CF-Root using JRS value and enabling animation CRT ("setprop build.sf.hw 0").
Click to expand...
Click to collapse
Wow... I don't know that. I was including JRS just because if someone has XXKPH rom without CF-Root, they can increase free RAM
a little bit Indonesian: Om Ketut kapan nih release CF-Root berikutnya?

fla.sh said:
Wow... I don't know that. I was including JRS just because if someone has XXKPH rom without CF-Root, they can increase free RAM
a little bit Indonesian: Om Ketut kapan nih release CF-Root berikutnya?
Click to expand...
Click to collapse
But only CF-Root executing script in /system/etc/init.d
Rencana u/ CF-Root:
1. Menjalankan dtapps2sd script di mode recovery
2. Kompilasi ulang kernel untuk mendukung ext4 data writeback

fla.sh said:
This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Coderom.NexusAce by code28h4p. The original download link was removed by Moderator because it's contains warez.
Further instructions: How to flash coderom.nexusace and How to setup a2sd with coderom.nexusace.
Best Kernel
CF-Root for S5830. Original post (in Indonesian) here.
Best RAM Tweak
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Best Animation Tweak (will smoothen animations on stock XXKPH ROM and activate CRT animation on coderom)
Not sure who share this tutorial, but you will get smooth animations after you have applied this tweak. Using Root Explorer, mount /system/ to RW, edit build.prop, find debug.hw, add a hash "#" before it. Save and reboot. Original post here.
For the best result: make sure you have activate a2sd and convert filesystem to ext4 using ext4 Manager (available through CF-Root) and do NOT apply Conservative Gov (when applied, it will save battery life but will slow down performance)
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.
Click to expand...
Click to collapse
Hi All,
I have an issue (may be not), I haven't installed the DT a2sd addon from this thread as I already run on coderom Nexus which has DT a2sd. I entered into Terminal and typed SU and then a2sd repair. After boot I saw i have only 24MB as EXT4 in a2sd GUI and Dalvik cache moved back to internal memory, but I created 2GB as EXT4 while partition which still appears in my Titanium backup. Did I do anything wrong? Which app is correct? Please help. I have uploaded screenshots from both apps.

royskeyz said:
QNBT said:
Google it, type "coderom nexus" first result its the rom 4shared download.
Click to expand...
Click to collapse
Thanks for the tip!
Still wondering if i'm able to backup my current data with CWM and restore them with the new ROM
Click to expand...
Click to collapse

Attachments here... Sorry missed them in the last post

[TUTORIAL][script] Install V6 Supercharger for ACE

Hello ACE user's I proudly present you the best of the best script ever made, created by zeppelinrox.
Well, the V6 Supercharger Script is an excellent tool to fix memory management on Android 2.3, just because the Gingerbread is very aggressive in memory management.
For best details on what this script do to your beloved phone visit his thread, he doesnt say this will run in ACE but i manage and tried to install in my phone and it works fine and now i say this is the best experience since i got this phone in my hands.
here we go.
Requirements:
1. Download busybox installer from market.
2. Download script manager from market.(make sure you instal this in INTERNAL memory)
3. Download V6 supercharger latest script from the original thread here.
4. Rootexplorer and of course you must be rooted.
Steps:
1. Run busybox installer and install busybox v1.18.2 (this will downgrade our current busybox v1.18.4) we need this because v1.18.3 above will cause an error which is not. (see attached image)
2. Run and configure script manager press the MENU button and go to MORE and then in ADVANCED OPTIONS and now in CONFIG and tick "browse as root" and leave other fields un-touch and exit. (see attached image)
3. Download V6 supercharger update8 script in original thread above and put in root of your sd card. (see attached image)
4. Run script manager by default it views the root of your sdcard find your downloaded V6 supercharger script and click/touch to it another window will appear tick "run as root" then run the script. (see attached image)
5. You will see the script running first chose a scrolling speed from 1-3 by touching the screen for the keyboard to pop-up (i prefer 3 for slow so you can follow the progress) then press enter in your keyboard.
6. Now you will see an option from 1-17 it has different value each option, select option 6 (balance 3) its the best for me, you can try other options of course, now press enter after typing # 6, wait to finish the scipt from running.
7. Now type option 16 to reboot the phone, the script will autorun, thats it enjoy and fell the greatness of your phone.
To check that the script is running and working please do step 4 and 5 and see attached image encircled in red if you have the same value then your good.
Optional: loopy smoothness. Very nice script and works very will with V6.

wow, supercharger..
surely will try it
Thanks
but there's is something written there
If you want to share this, just link to this thread.
If you want to make a thread in other forums telling people about it, that's great.
But I would prefer that you do not post a copy of the V6 SuperCharger installation script in those forums.
If you already have a thread with a copy attached, I won't bother you about it. But please don't attach further updates.

i have Check's RAM Management Script ☜☆☞ V4 Twin Turbo [CF-Root Adaptation] installed on my ace. can i install this v6 supercharger?
do i need to delete that script? if so how to delete?
thanks

+1... but can you explain more how and which areas it does the work and how it is better than others if any
Edit: sorry i went through the other thread and got some answers...Thanks neways

fantomatico said:
i have Check's RAM Management Script ☜☆☞ V4 Twin Turbo [CF-Root Adaptation] installed on my ace. can i install this v6 supercharger?
do i need to delete that script? if so how to delete?
thanks
Click to expand...
Click to collapse
You can delete his tweak using root explorer, go to system/etc/init.d, mount r/w first.

dungos said:
+1... but can you explain more how and which areas it does the work and how it is better than others if any
Edit: sorry i went through the other thread and got some answers...Thanks neways
Click to expand...
Click to collapse
I cant copy the original threads explanations, kindly visit his thread the link is above, you will know whats the big difference of his script than others.

seilent said:
wow, supercharger..
surely will try it
Thanks
but there's is something written there
If you want to share this, just link to this thread.
If you want to make a thread in other forums telling people about it, that's great.
But I would prefer that you do not post a copy of the V6 SuperCharger installation script in those forums.
If you already have a thread with a copy attached, I won't bother you about it. But please don't attach further updates.
Click to expand...
Click to collapse
I share here on what to do step by step in our ACE, its not there in his thread, but if someone knows how to install his script then one can go diectly to his thread for updating, BTW i will edit my post saying i will update if he has released new.

I always busybox error, asking me to change the version, I can not install ..... you know why? Thanks to all

kaarburo said:
I always busybox error, asking me to change the version, I can not install ..... you know why? Thanks to all
Click to expand...
Click to collapse
Did you follow the instruction? did you install the busybox 1.18.2?

How about CF-Root? Is this compatible with CF-Root? CF-Root has busybox preinstalled...

For example, Black Hawk has busybox v.1.17.1, there is no need to instal another version of busybox.
All works, thanks.

royskeyz said:
You can delete his tweak using root explorer, go to system/etc/init.d, mount r/w first.
Click to expand...
Click to collapse
His tweak overwrote 00tweaks on init.d wich came by default with CodeROM v2x-2b.
Any problem if i just leave it and install yours?
thanks

royskeyz said:
Did you follow the instruction? did you install the busybox 1.18.2?
Click to expand...
Click to collapse
yes, I installed busybox 1.18.2, but I error. KPN I + CF-Root v80 stocks, that is the problem?

impressions:
1. increased rate of transitions from the menu.
2. pause when awake is almost negligible.
3... in progress)

EDIT: Nevermind... nice share!

From Chainfire's note:
It is possible to install a custom busybox over CF-Root v3.0 and newer. However, this is not without risk. CF-Root makes heavy use of scripting, and many CF-Root scripts rely on the internal busybox version. If you do install a seperate busybox version (always use "stericson" installer!), install it to /system/xbin. Installing it to /system/bin will mess things up for sure. Even if you do that part right, it may still break CF-Root, so make sure to make a backup before trying.
Click to expand...
Click to collapse
Higher version or even same version but compiled by different person (so could be have different applet compiled in) not always good for CF-Root. For an example, busybox without sh applet will break CF-Root including some user space applications.

I hit clear memory in task manager and started laughing when it showed 84 mb used, hahaha. Generally good in multitasking.

consegregate said:
I hit clear memory in task manager and started laughing when it showed 84 mb used, hahaha. Generally good in multitasking.
Click to expand...
Click to collapse
I have 125 only.

installed....good....seen a change in ram usage...less ram being used

During installation the script I saw a message that applies a patch to prevent the closure of the launcher. If I clear the memory in the task manager launcher is unloaded from memory. Or script does not work, or ... script does not work).

[GUIDE] Netfilter Modules X8 X10 for Stock Kernel

This is specially meant for Stock kernel user which don't have kernel iptables function.
Android Firewall
It's a android firewall capable of blocking some app to reach the internet by redirect them to certain address.
It can only activated if only there is Iptables executable & some modules to support it's function.
It's command line configurable but it's way too complicated to us.
You'll Need:
A Sony Ericsson X8 Android phone. (Will work on X10, but not tested.)
Rooted.
Busybox.
CWM Recovery.
Instruction:
Flash this through CWM http://www.mediafire.com/?qcn1jlwilq9l57n
Goto /system/etc & Add those line inside ADD TO HW_CONFIG.SH.txt text file into hw_config.sh.
Reboot
Download Any (I Used DroidWall https://play.google.com/store/apps/details?id=com.googlecode.droidwall.free) to manipulated the iptables to block or allow your app to access the internet.
Say thanks to AnDyX who make this modules. (http://forum.xda-developers.com/showthread.php?t=1184907)
I'm just doing the update zip for CWM that's all.
Note: Bootloops or error ARE LIKELY NEVER OCCURED. This is tested on Eclair 2.1.C.0.0 Rom (Offical Sony Ericsson rom for x8) and GDX Rom.

Whit this module i will have WiFi tethering in my Xperia X8 running on stock kernel with MiniCM7 ?

Link aint working
Edit: sorry i know now what was doing the problem
Sent from my E15i using XDA

AttilaAtisz said:
Whit this module i will have WiFi tethering in my Xperia X8 running on stock kernel with MiniCM7 ?
Click to expand...
Click to collapse
Yes, with appropriate tethering app. Some rom have tethering setting set in their rom like mine, so i don't know which tethering app work best.

Link don't work
Edit:sori
Sent from my E15i using xda premium

Do NOT flash it with CWM Recovery or xRecovery until CKKnot correct the install script else it will wipe your /system partition and phone won't reboot and you will have to reflash your device.

roms2000 said:
Do NOT flash it with CWM Recovery or xRecovery until CKKnot correct the install script else it will wipe your /system partition and phone won't reboot and you will have to reflash your device.
Click to expand...
Click to collapse
I just rechecked, it is indeed lead to /system wipe...
it's me who make the script wrong, I have just reuploaded the fixed one...
Redownload it if you not able to just now... And sorry for my mistake

That is really better
Thanks for your quick reply.

Hello Im having problems whith step 2, I dont know how to goto /system/etc & Add those line inside ADD TO HW_CONFIG.SH.txt text file into hw_config.sh
<Pliz help me!

andresql said:
Hello Im having problems whith step 2, I dont know how to goto /system/etc & Add those line inside ADD TO HW_CONFIG.SH.txt text file into hw_config.sh
<Pliz help me!
Click to expand...
Click to collapse
use some file menger like rootexplorer

Could you please be more specific with point 2?
Should I copy all lines (whole content) from ADD TO HW_CONFIG.SH.txt text file and paste them into hw_config.sh? At the end of this file? In some specific point? Nothing to replace in hw_config.sh?
Well, after first try my X8 seems to be bricked. Sony Ericsson logo after reboot