How would I go about if I want to create my own rom based on the latest samfirm/updato rom?
I have this far downloaded one for s7edge. Unpacked the first zip so I get AP/BL and so forth. I've then unpacked the BL and managed to unpack the boot loader stuff so I have kernel an ramdisk by them self. I then unpacked the ramdisk.. But how do I go on to make this a flashable rom? Preferred is to replace or remove the recovery so I can preserve TWRP. I've done all this so far to get a flashable stock rom that doesn't enforce encryption.. If I get all working I might do more stuff with it
Any help or pointers appreciated!
I have tracked down the last "stable" cm build for the TF101(CM9) and combined it with the necessary gapps through a TWRP backup. It is untouched, and ready to be restored.
You need to unzip the file and place the contained folder inside your TWRP backup folder. Hope this helps someone.
FLASH AT YOUR OWN RISK (as always) :b
https://goo.gl/cxduLx
This one includes/flashes backup of recovery partion TWRP 2.3.2.3:
https://goo.gl/KtVXdw
Current kernel is 2.6.39.4_CyanogenMod_DHD-g74007d5 pinky-ghost.
IF you still out there you got a mirror?
Silverobot ...Were you able to find a working link for the recovery file?
Hi all, I posted this in the 6P bootloop thread, but didn't get a response. As that is a pretty LONG thread, i'm thinking my question may have gotten lost in the jumble.
Quick run down.
A few months back my 6P started the BLOD. I found the fix listed on these pages, applied it, and have been happily using my phone ever since. Phone is bone stock 7.1.2 other than the TWRP recovery and the modified EX kernel for 4 cores.
Since the fix, my phone FINALLY got the OTA update to go to Android 8.0 and i obviously want to get it done. My concern is HOW to do this without causing more headache.
Can anyone point me in the right direction? Should i use the OTA update or download the factory image from Google?
I've got some knowledge as i used to be into the "rooting" scene back in the day, but haven't for a while, so i feel a little lost.
Thanks for any help.
johnnyphive said:
Hi all, I posted this in the 6P bootloop thread, but didn't get a response. As that is a pretty LONG thread, i'm thinking my question may have gotten lost in the jumble.
Quick run down.
A few months back my 6P started the BLOD. I found the fix listed on these pages, applied it, and have been happily using my phone ever since. Phone is bone stock 7.1.2 other than the TWRP recovery and the modified EX kernel for 4 cores.
Since the fix, my phone FINALLY got the OTA update to go to Android 8.0 and i obviously want to get it done. My concern is HOW to do this without causing more headache.
Can anyone point me in the right direction? Should i use the OTA update or download the factory image from Google?
I've got some knowledge as i used to be into the "rooting" scene back in the day, but haven't for a while, so i feel a little lost.
Thanks for any help.
Click to expand...
Click to collapse
Well, for starters do NOT take the OTA. It will either fail or boot loop your phone. Due to the fact you have a modified boot.img you will need to update manually using fastboot with the full image. Re-apply the modified kernel after you finish updating the partitions, but BEFORE booting the first time. You can follow most guides on how to manually update a full image using fastboot, just add the step of flashing the modified kernel before booting.
Thanks for the reply and the help. If i could ask for a little more help, as this is my only phone.
Can you explain the difference between the modified boot.img and the modified kernel?
If i download the factory image from here (https://developers.google.com/android/images) is it ok to the get the latested one (Nov 2017) or do i need to get the original one (Sep 2017 as i'm on Fi)
Once i flash the factory image, is it going to replace the modified boot image as well as the modified kernel?
Follow the OP on this thread (https://forum.xda-developers.com/nexus-6p/general/guide-fix-nexus-6p-bootloop-death-blod-t3640279) in the downloads section there appear to be 2 files i would need, the "Boot.img from stock 6.17, 8.0 firmware" and "EX kernel version 5.03". Am i understanding that correctly?
Like i said, this is my only phone, and i'm probably just being overly paranoid about bricking it, but any clarification would be greatly appreciated.
johnnyphive said:
Thanks for the reply and the help. If i could ask for a little more help, as this is my only phone.
Can you explain the difference between the modified boot.img and the modified kernel?
If i download the factory image from here (https://developers.google.com/android/images) is it ok to the get the latested one (Nov 2017) or do i need to get the original one (Sep 2017 as i'm on Fi)
Once i flash the factory image, is it going to replace the modified boot image as well as the modified kernel?
Follow the OP on this thread (https://forum.xda-developers.com/nexus-6p/general/guide-fix-nexus-6p-bootloop-death-blod-t3640279) in the downloads section there appear to be 2 files i would need, the "Boot.img from stock 6.17, 8.0 firmware" and "EX kernel version 5.03". Am i understanding that correctly?
Like i said, this is my only phone, and i'm probably just being overly paranoid about bricking it, but any clarification would be greatly appreciated.
Click to expand...
Click to collapse
Use the latest November image. The boot.img contains the kernel and ramdisk, critical files necessary to load the device before the filesystem can be mounted. When you flash the new boot.img contained in the Google image, it will overwrite the patched kernel. You then need to re-patch it by installing EX kernel before booting. EX writes to (modifies) the stock boot.img. There are also pre-modifed boot.img files floating around. You will probably get more detailed help in the dedicated thread. Learning to flash manually (or remember how) is not really a big deal and a necessary skill for modding (and for getting yourself out of trouble). Good luck. :good:
v12xke said:
Use the latest November image. The boot.img contains the kernel and ramdisk, critical files necessary to load the device before the filesystem can be mounted. When you flash the new boot.img contained in the Google image, it will overwrite the patched kernel. You then need to re-patch it by installing EX kernel before booting. EX writes to (modifies) the stock boot.img. There are also pre-modifed boot.img files floating around. You will probably get more detailed help in the dedicated thread. Learning to flash manually (or remember how) is not really a big deal and a necessary skill for modding (and for getting yourself out of trouble). Good luck. :good:
Click to expand...
Click to collapse
Ok, so 1 last time (sorry)
1 - Downloaded the latest 8.0.0 factory image from google (this contains the bootloader, radio, and partitions (.zip).
2 - Get phone to fastboot and apply the above 3 new images
3- before rebooting, flash oreo4core (new, modified boot.img), TWRP recovery.img
4- reboot to recovery (TWRP) and apply the modified EX kernel
5 - reboot and (hopefully) profit
Am i missing anything, or doing anything that isn't needed?
johnnyphive said:
Ok, so 1 last time (sorry)
1 - Downloaded the latest 8.0.0 factory image from google (this contains the bootloader, radio, and partitions (.zip).
2 - Get phone to fastboot and apply the above 3 new images
3- before rebooting, flash oreo4core (new, modified boot.img), TWRP recovery.img
4- reboot to recovery (TWRP) and apply the modified EX kernel
5 - reboot and (hopefully) profit
Am i missing anything, or doing anything that isn't needed?
Click to expand...
Click to collapse
<<Disclaimer: I don't use the 4 core kernel, so I don't know if it comes with installer script or someone has just modified the latest boot.img>> Unzip the "partitions" zip you refer to and extract those image files to the same folder as bootloader and modem. For example, you can keep TWRP recovery if you don't flash the recovery.img. That is how you preserve your custom recovery. So in other words you'll now have a folder (your ADB folder?) with 5 image files.... bootloader, radio, boot, system, and vendor all in one folder. <<Note: it is my understanding you just substitute the latest oreo4core file (should be boot.img?) If this is true, copy that file into your ADB folder and let it overwrite the stock boot.img. Stop. Copy over flash-all.bat, change the *.bat extension to *.txt and open in notepad. You will see (and can copy/paste) the fastboot commands to get you started with bootloader and radio. Then flash the last 3 (boot, system, vendor). At this point you can reboot into the OS. Since you substituted the oreo4core boot.img file for the stock boot.img there is no need to use TWRP to flash anything. That and since you skipped flashing the recovery.img, TWRP is still there.
v12xke said:
<<Disclaimer: I don't use the 4 core kernel, so I don't know if it comes with installer script or someone has just modified the latest boot.img>> Unzip the "partitions" zip you refer to and extract those image files to the same folder as bootloader and modem. For example, you can keep TWRP recovery if you don't flash the recovery.img. That is how you preserve your custom recovery. So in other words you'll now have a folder (your ADB folder?) with 5 image files.... bootloader, radio, boot, system, and vendor all in one folder. <<Note: it is my understanding you just substitute the latest oreo4core file (should be boot.img?) If this is true, copy that file into your ADB folder and let it overwrite the stock boot.img. Stop. Copy over flash-all.bat, change the *.bat extension to *.txt and open in notepad. You will see (and can copy/paste) the fastboot commands to get you started with bootloader and radio. Then flash the last 3 (boot, system, vendor). At this point you can reboot into the OS. Since you substituted the oreo4core boot.img file for the stock boot.img there is no need to use TWRP to flash anything. That and since you skipped flashing the recovery.img, TWRP is still there.
Click to expand...
Click to collapse
Thank for the help! Everything seems to be up and running. I know you said you don't use the "4 cores" (can only assume your either on a different phone or yours isn't affected by the BLOD), but do you know if i still need to apply the EX kernel update, or know of a way to tell if it's already been applied?
Thanks again for all the help. I was pretty much in the right direction, but being as how i'd been away from it for a while, i wanted some backup
johnnyphive said:
Thank for the help! Everything seems to be up and running. I know you said you don't use the "4 cores" (can only assume your either on a different phone or yours isn't affected by the BLOD), but do you know if i still need to apply the EX kernel update, or know of a way to tell if it's already been applied? Thanks again for all the help. I was pretty much in the right direction, but being as how i'd been away from it for a while, i wanted some backup
Click to expand...
Click to collapse
I don't think you can flash EX kernel from now on. I think you have to use a modded boot.img that will contain his kernel/ramdisk. This is my guess. You really should be getting your information in the dedicated thread where everyone is actually installing and using it. Google "oreo 4 core" and you will find the XDA thread is the first hit. Good luck. :good:
Hello guys!
For the may update, a friend sent me a zip archive containing the stock boot.img that I used to flash in twrp when flashing kernels. Now that june update came up.. how can I create one in order to do the same thing? If it's helpful, it had a META_INF folder in it. Thank you in advance!
I more or less understand what a KDZ is, and how to flash it with LGUP. I also sorta understand that a TWRP flashable .zip file is basically just an archive of a bunch of .img files that TWRP (magically) knows where to flash to on the device. So I can get a KDZ for the stock ROM from LG, or I can get a .zip of a custom ROM such as LineageOS. However I've also seen .zips of stock ROMs such as in this thread by dudeawsome.
What I want to know is, is there a way to convert an official KDZ to a .zip file that TWRP can flash? I'm assuming that is what's done to make a stock ROM available in a convenient .zip format for use in TWRP, but I'd like to know the details of the process. The closest I've found is something called KDZZ by weakNPCdotCom, but it appears that it no longer works and is discontinued.
I want to be able to take any official KDZ and convert it to a TWRP-friendly zip. I also want to remove the laf and recovery images as well since I don't want TWRP overwritten. Can anyone give me the lowdown on this?