Related
Hi all.
I'm running the latest cyanogen on my G1 (with non-danger SPL). I have apps2sd, but I was thinking - cyanogen seems to have released a Nexus One ROM with no apps2sd and went to relocating dalvik-cache to /cache instead.
Cyanogen seems to have done this safely for Nexus One, so I guess it's doable with G1 too, right? Any stable solutions out there?
I found this: http://wiki.cyanogenmod.com/index.php/Dalvik-cache-relocation , but further googling revealed that this is not recommended (browser may clear it, etc...). So, can this be done with G1 safely?
If there is a problem with browser clearing it, can it be modified to _not_ write to /cache, and use SD card instead?
If you set up the permissions correctly, then the browser won't have any kind of ability to delete it.... unless the browser calls a system service
Note: That is actually a great thing to do. It even makes sense since dalvik-cache is even cache!
Note2: if an application is running with its dalvik-cache in /cache/dakvik (or whatever), then it will have an open file handle, preventing the file from being deleted at least until the application is closed. If the dalvik cache for a non-running application is deleted, it will be automatically recreated when the application is next launched -- it will just slow down the launch a little.
The process is simple. Create a directory /cache/dalvik owned by system:system chmod 771. cp -p everything from /data/dalvik-cache into /cache/dalvik. Delete /data/dalvik-cache. Create symlink /data/dalvik-cache --> /cache/dalvik. Note: You'll probably want to do this stuff from RECOVERY since it could make a mess if you try this on a running system with the open file handles.
Actually on second thought, it looks like the browser may be calling a system service for read/write to /cache. You may need to create an extra level in the hierarchy under /cache in order to enforce the structure.... i.e. /cache/root/dalvik, chown root:root /cache/root; chmod 555 /cache/root; chown system:system /cache/root/dalvik; chmod 771 /cache/root/dalvik, and create your link /data/dalvik-cache --> /cache/root/dalvik
Note: You can just as easily move your application data over to the /cache partition. Procedure would be similar, EXCEPT that you wouldn't want to move your ENTIRE /data/app over. Just move individual APKs over and link back to them.
Due to a number of requests I have built a flashable .zip that will install a simple cache2cache script for CyanogenMod 6.x and 7.x ROMs.
NAND backup BEFORE you try this!
From user feedback it seems that if you are ALREADY running Apps2sd this causes issues with apps that where installed to the SD card and you will have to remove and re download them. There have been no reports of issues if you flash PRIOR to enabling Apps2sd ...
Per dingermtb: check out post http://forum.xda-developers.com/showpost.php?p=11487856&postcount=58 for an easy fix for Apps2sd.
By using this script the dalvik-cache has been relocated from the internal /data/dalvik-cache/ directory to the internal /cache/dalvik-cache directory. The Eris comes with an internal /cache/ file block of 130mb that is not used much (CyanogenMod does store the cache of system apps in the /cache file block but NOT any apps that are downloaded from the market)! So by moving the dalvik-cache to this free area you now have more space on internal /data/ for apps and over 75mb in internal /cache/ for dalvik-cache. This means that you can probably install close to 75-100 apps WITHOUT having to worry about apps2sd!
This IS NOT a Custom MTD script as I wanted to keep it simple. This solution is not as "ideal" as a Custom MTD scripts work but it is a bit easier, safer, and simpler... Plus it works
How do I know it worked?
So why does my Settings>SD card & phone storage>Internal phone storage only show 150mb or less? This is because this number ONLY reflects the /data/ file block on your phone and does not "see" the /cache/ block that is now being used for dalvik-cache storage.
From adb or Terminal Emulator (you can get it free from the market if your ROM does not already have it) run the follow command:
Code:
df -h
You will see that your /cache partition now is more used and that your /data partition is less used.
Also you can browse to the /cache/dalvik-cache/ folder using your favorite file explorer and see that you now have files starting with "[email protected]" and not just "[email protected]"
What does it do?
Since CyanogenMod already uses an init.d framework that runs during boot on his ROMs it was easy to add a new shell script that would automatically run with the other boot scripts in the /system/etc/init.d/ folder.
This simply adds the following 07cache2cache file to /system/etc/init.d/
Code:
# !/system/bin/sh
#
# Author: zach.xtr Jan 2011
# Moves the /data/dalvik-cache files to largely unused /cache/dalvik-cache location and symlinks
# This code is intended for the ERIS, use on other phones may not work due to predefined file block sizes...
log -p i -t cache2cache "Running cache2cache to move data/dalvik-cache to cache/dalvik-cache...";
# Mount filesystem
/system/xbin/busybox mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# Make sure final /cache/ location is setup correctly
if [ ! -d /cache/dalvik-cache ];
then
log -p i -t cache2cache "/cache/dalvik-cache directory not found, creating and adding permissions...";
/system/xbin/busybox mkdir /cache/dalvik-cache;
/system/xbin/busybox chown 1000:1000 /cache/dalvik-cache;
/system/xbin/busybox chmod 777 /cache/dalvik-cache
fi;
if [ -d /data/dalvik-cache ] && [ ! -h /data/dalvik-cache ];
then
log -p i -t cache2cache "Moving files from /data/dalvik-cache to /cache/dalvik-cache";
/system/xbin/busybox cp -fp /data/dalvik-cache/* /cache/dalvik-cache;
/system/xbin/busybox rm -r /data/dalvik-cache;
log -p i -t cache2cache "Creating Symbolic Link of /cache/dalvik-cache as /data/dalvik-cache";
/system/xbin/busybox ln -s /cache/dalvik-cache /data/dalvik-cache;
/system/xbin/busybox chown 1000:1000 /data/dalvik-cache
/system/xbin/busybox chmod 0771 /data/dalvik-cache
fi;
# Clean up
/system/xbin/busybox mount -o remount,ro -t yaffs2 /dev/block/mtdblock3 /system
How do I remove it?
Since it only adds 1 file all you need to do is delete the /system/etc/init.d/07cache2cache file and reboot your phone. One could use adb or RootExplorer (or similar) file manager.
NOTE: if you have been using this for a while and have installed enough apps and THEN remove it I am not sure what will happen when you reboot... Basically you may not have enough space in the /data file block alone.
awesome i will try this now
Oh my gosh, bless you! This is great.
Downloading and installing onto CELB 4.3 right now...
[edit - Reported phone storage remaining went from 28 MB to 70 MB free. It did restart my phone on the first restart; I'm not sure if that's normal, but things seem to be working fine.]
korben dallas said:
awesome i will try this now
Click to expand...
Click to collapse
Success?
Sent from my ERIS using XDA App
Flash success on floyo 5.0. Gave e another 25 or so MB. Great work!!
Sent from my Floyo using XDA App
Thank you! Works great on my CELB4.2 . Gained an extra 25MB.
Sent from my ERIS using XDA App
Nicely done. Nonsensikal 16.1 went from 17 or 18 megs free to 67 megs. Working fine so far..
Pretty cool. I'm never low on space so I won't need this, but thanks for creating it.
Is it possible for this to cause apps to slow down, since when they try to access the cache it'll be on the (slower) SD card?
However, app2sd is now a little confused, and the apps it thinks are on the sd card cannot be found when I try to move them back to the phone. However, they are operable.
Hungry Man said:
Pretty cool. I'm never low on space so I won't need this, but thanks for creating it.
Is it possible for this to cause apps to slow down, since when they try to access the cache it'll be on the (slower) SD card?
Click to expand...
Click to collapse
No
This does not use the SD card in any way; it only redistributes from the INTERNAL /data file block to the INTERNAL /cache file block...
If anything you may gaine a minor permormance improvement as you will have more "working" space...
galbro said:
However, app2sd is now a little confused, and the apps it thinks are on the sd card cannot be found when I try to move them back to the phone. However, they are operable.
Click to expand...
Click to collapse
Hmm...
Are you using the built in Froyo style Apps2sd or the flashable?
Thanks Zach!
I have it on CELBFroyo 4.3. Will this will survive a flash to a later version of the ROM if no wiping happens?
strongergravity said:
Thanks Zach!
I have it on CELBFroyo 4.3. Will this will survive a flash to a later version of the ROM if no wiping happens?
Click to expand...
Click to collapse
No you will have to reflash the .zip even with a no wipe update as it is a /system file
Thank you! When I get some free time I'll flash CELB, test, and report back.
Sent from my Eris using XDA App
I installed onto my phone running Vanilla FroShedyo. It is running like a champ so far and all the apps seems to work as usual. I went from 59.07MB free to 83.14MB! I know I am a minimalist when it comes to apps on my phone but man does it fly now. Thank you for this script and keep up the good work!
44mb to 74mb on nonsensikal v12.5. thanks and gotta love this place called XDA!
58mb to 77mb FroShedYo Vanilla
Linpack pre-script 4.8-5.1
Linpack post-script 4.8
Quadrant pre 380-420
Quadrant post 376
Thanks for the extra space and sharing
Flashed on CELB and lost access to all of my apps on the sdcard. I'm using the built in Froyo apps2sd. Also broke my widgets on the home screens.
magnethart said:
Flashed on CELB and lost access to all of my apps on the sdcard. I'm using the built in Froyo apps2sd. Also broke my widgets on the home screens.
Click to expand...
Click to collapse
Can you try clearing dalvik-cache and rebooting?
zach.xtr said:
Can you try clearing dalvik-cache and rebooting?
Click to expand...
Click to collapse
dalvick wipe did not change anything. still have broken widgets and no access to apps installed on sd.
As some people experienced, default partinitioning of internal ROM is a bit missed than usual needs and our ZTE's still complains about disk space running out.
One of the solutions is to move /data/data to SD-ext partinition (only with A2SD enabled!)
how to do that?
Start an adb shell
Code:
rm -r /system/sd/data
cp -pr /data/data /system/sd/data
cd /data/data
now use
Code:
du -hs *
to check which directories are the biggest and contains non-critical software added by user (eg another music player or GPS navigation) and remove them to reduce disk usage (system will start to complain about disk space).
Use text editor to create a file "05data"
Code:
#!/system/bin/sh
# mount /system/sd/data to /data/data
if [ -d /system/sd/data ];
then
/system/xbin/mount -o bind /system/sd/data /data/data
fi
then push it to android device
Code:
adb remount
adb push path_to_file /etc/init.d/05data
adb shell chmod +x /etc/init.d/05data
Disclaimer:
I am using GSF B27 rom with A2SD, solution to symlink /data/data with /system/sd/data folder failed on my phone (bootloop) so I've created solution mentioned above. Binding than symlinking is safer, because original /data/data is a failover container for user files.
to move data to SD card it needs apps2sd text in init.rc then the bin files! ex this:
#!/system/bin/sh
# mount /system/sd/data to /data/data
if [ -d /system/sd/data ];
then
/system/xbin/mount -o bind /system/sd/data /data/data
if it have that then edit it!
and then the init files in /system/etc/init.d maybe them can edit on Linux or if can't then needs to use other program or then notepad or other programs on windows to edit init.d folder files...
then... it needs APP2SD files which works on Blade...
Now the Data(s)/APP(S) moving needs to be enabled....
If wants something else DATA to move SD Card then I don't know how... (maybe with File Explorer apps)...
Hi!
I am using GSF b27 on my Blade and because I was running out of internal memory, created a partition using clockworkmod (v5) recovery, following this tutorial:
http://android.modaco.com/topic/331205-guide-how-to-get-more-free-space-for-your-apps/
After reboot and trying to (re)install some apps, nothing changed...all my apps are still installed on my internal memory (that is full).
I checked the folder /system/sd but all the folders inside it are empty...it looks like A2SD is not running!
Isn't A2SD included in GSF27 and supposed to run automatically after a ext partition has been created?
Any help is welcome! Thanks
Tuc
A2SD is enabled after you create an ext2 partinition, right.
Now You have to copy *all* directories from /data/data to /system/sd/data
(how-to in post #1) AND delete directories of no-so-critical applications like Your another MP3 player or less played game from /data/data folder. You should have ~50MiB free on /data partiniton
Then, creating an initscript mentioned above will make an overlay of /system/sd/data folder on /data/data folder, so all needed files are on their place. Overlay instead of symlinking is better, because You have (stil aging, so old) backup of most important things, so in case of ****up You'll loose less.
Thanks for those details.
Everything went smooth until the following command:
adb shell chmod +x /etc/init.d/05data
Click to expand...
Click to collapse
ADB answers "Bad mode"...
I'm really not familiar with this ADB tools
EDIT: The folders in system/sd are still empty...Is there any SIMPLE solution to activate A2SD without ADB shell stuffs???! I don't mind uninstall all my apps to re-install them in this system/sd folder, I just need to know how to activate automatic installations in this folder instead of the internal memory... Thanks
Tuc
It's not about deleting apps and installing them.
It's about moving ALL data from /data/data to /system/sd/data, removing unnecessary files from /data/data (to get more free space to make android stop to complain about free space) and creating overlay from SD card on /data partiniton to make them back.
There's no directory called /system/sd/* on my LG P690. Can't I use the /sdcard/data directory or the /data/sdext2/data instead?
abhishek046 said:
There's no directory called /system/sd/* on my LG P690. Can't I use the /sdcard/data directory or the /data/sdext2/data instead?
Click to expand...
Click to collapse
yes u can
Blade Q Maxi aps2 sd
Hi I need help in moving apps to SD on a Blade Q Maxi phone.Tried with a terminal emulator app but no luck.Please assist.
it works on other ROMS, like TouchWiz?
I tried today to upgrade from 4.1.2 to 4.2.2 but it failed about 30% of the way through the upgrade and ended with the Droid on his back with a red x.
Its rooted but got stock recovery.
I did the same upgrade for my Nexus 4 to 4.2.2 from 4.2.1 and that upgraded fine.
What's causing the upgrade to fail?
Any help would be much appreciated.
Thanks
Jon
Sent from my Nexus 7 using XDA Premium HD app
look for the error message in /cache/recovery/recovery.log
If you comb thru the bigger threads on the 4.2.2 update....every imaginable problem and solutions are in there.
Sent from my cell phone telephone....
This is part of the log that shows the failure.
Any help would be much appreciated.
Thanks
Verifying current system...
failed to stat "/system/xbin/bttest": No such file or directory
file "/system/xbin/bttest" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/xbin/bttest", "07168ec97de36a7cca8b6867ad66937c6c6c1f4d", "2bb363a3f434d165d1167d915c2ba44967e22071")
assert failed: apply_patch_check("/system/xbin/bttest", "07168ec97de36a7cca8b6867ad66937c6c6c1f4d", "2bb363a3f434d165d1167d915c2ba44967e22071")
E:Error in /cache/da55f917feee.signed-nakasi-JDQ39-from-JZO54K.da55f917.zip
Sent from my Nexus 7 using XDA Premium HD app
OK jonchill I will try to help out.
But only because you inadvertently disclosed a new OTA download (JZO54K->JDQ39) for nakasi.
Here's the deal:
The OTA process performs checksums on hundreds of individual files (and even partitions e.g. boot partition) before it begins any work. 100% of checksums must pass before anything gets changed by the OTA.
It's a safety feature meant to protect people from applying the wrong files to their tablets/phones. More importantly, the reason that it is done is because the OTA does not contain "replacement" files - it only has small binary "patch" files which can be used only in conjunction with the original file to create the intended replacement file. This is how OTAs can be so much smaller than a full ROM - the files already present are "patched" to create their replacements.
But the bottom line is that if *you* removed or altered any single file which is a target of the OTA patching process, these pre-installation checks will fail. (Even worse, it stops immediately - it is possible that you have more than one file involved in this. Because of this stop-on-first-fail behavior, you don't know yet whether or not there are more to come.)
When I say *you* I mean you personally plus any root-using apps which you installed and ran on your tablet. Could have been an app.
OK, now for the good news. I downloaded the OTA - thanks for providing the file name - and looked at the installer script; that installer script for JZO54K-> JDQ39 is shown here on pastebin. The file which your OTA is complaining about is "bttest" - and as it turns out, this check occurs on line 1040 - it is the third from last file checked. The only thing which comes after that is a check of
/system/xbin/dexdump
and
the boot partition ( EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX )
Now I don't have any idea what might have caused "bttest" to disappear from your ROM. On the off-chance that "dexdump" got deleted too, attached is a zip of those two files from the JZO54K distro.
This is not a flashable zip - it's just the two files. It's your responsibility to get them into /system/xbin/
Note their ownership info:
Code:
-rwxr-xr-x 1 root 2000 5448 Oct 2 14:49 /system/xbin/bttest
-rwxr-xr-x 1 root 2000 59828 Oct 2 14:49 /system/xbin/dexdump
If you restore them to /system/xbin/ make sure you
Code:
chown 0.2000 /system/xbin/bttest /system/xbin/dexdump
chmod 755 /system/xbin/bttest /system/xbin/dexdump
I verified their SHA1 checksums (note these are the 2nd string of digits in the failing assert_check).
2bb363a3f434d165d1167d915c2ba44967e22071 bttest
e5e4d35038ed3e32a15194275806d90e64e003c6 dexdump
good luck.
I've downloaded the files and tried transferring them across to XBIN but it fails saying the folder isn't writable, I've tried changing the permissions on the folder but it errors saying can't set permissions.
What am I doing wrong?
Thanks
The /system partition is typically mounted "ro" - Read Only.
Root-aware file browsers typically have a toggle in their (root-related) menu to remount /system in rw mode, but you can easily do it yourself from the command line. (using a terminal emulator or adb). You just need to be root to do this. (Or you can just do everything in the custom recovery, in which case the /system mount point will be in "rw" mode by default)
C:\foo> adb shell
$ su
# mount -o remount,rw /system
(copy files into place, do chmods , etc)
# mount -o remount,ro /system
Just tried a you suggested and it doesn't seem to want to put the system into RW. I've also tried changing the permissions through the file manager I've got installed and get the same result.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ $ su
su
[email protected]:/ # mount -o remount,rw /system
mount -o remount,rw /system
mount: Read-only file system
255|[email protected]:/ #
Thanks
jonchill said:
Just tried a you suggested and it doesn't seem to want to put the system into RW. I've also tried changing the permissions through the file manager I've got installed and get the same result.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ $ su
su
[email protected]:/ # mount -o remount,rw /system
mount -o remount,rw /system
mount: Read-only file system
255|[email protected]:/ #
Thanks
Click to expand...
Click to collapse
Well, that's odd. I'm not really sure why that is happening. You could fool around with the mount command a little bit or just avoid all this nonsense and do what you need via adb in the custom recovery.
If your bootloader is unlocked, but you don't want to *flash* a custom recovery (I see you said you have stock recovery), you can nevertheless temporarily *boot* one, and just that temporarily booted custom recovery as in:
- put device in bootloader mode
C:\fubar> fastboot boot name-of-custom-recovery-image.img
(wait until it is booted)
C:\fubar> adb shell
# mount /system
# cp /sdcard/wherever/bttest /system/xbin/bttest
# cp /sdcard/wherever/dexdump /system/xbin/bttest
# chown 0.2000 /system/xbin/bttest /system/xbin/dexdump
# chmod 755 /system/xbin/bttest /system/xbin/dexdump
# sync
# umount /system
reboot
I don't know how you originally rooted, but generally the adb connection from either custom recovery (TWRP/CWM) needs an additional USB driver (yes, even though you "already have ADB working with the normal OS"). I suppose most lazy folks use either a toolkit or the XDA Universal Naked driver for this. (No support will be given by me on driver installs - I need to draw the line someplace.)
good luck
Tried booting to a temp custom recovery (TWRP) and followed your instructions but still getting the Read-Only file system. At this stage would it be better to take a backup and re-flash a full image?
C:\NRT\data>adb shell
~ # ←[6n
~ # ←[6nmount /system
mount /system
~ # ←[6ncp /sdcard/bttest /system/xbin/bttest
cp /sdcard/bttest /system/xbin/bttest
cp: can't create '/system/xbin/bttest': I/O error
~ # ←[6ncp /sdcard/dexdump /system/xbin/dexdump
cp /sdcard/dexdump /system/xbin/dexdump
cp: can't create '/system/xbin/dexdump': Read-only file system
Thanks
Well that is bizarre.
Some boot kernel/ramdisk configurations use a "errors=remount-ro" mount option with ext4 filesystem that automatically prevents a "rw" mount if corruption was detected in the ext4 filesystem meta-data.
Although when the mount of /system succeeds in 4.2.2 stock I don't see that - this is what you get:
Code:
adb shell cat /proc/mounts | grep system
/dev/block/platform/sdhci-tegra.3/by-name/APP /system ext4 ro,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
I also don't see that option in use with TWRP 2.4.1.0 either:
Code:
adb shell cat /proc/mounts | grep system
/dev/block/mmcblk0p3 /system ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
It's just a hypothesis - but perhaps somehow your /system partition got damaged?
I am reluctant to continue giving advice since your device is behaving non-nominally. (I never used JZO54K, so I can't say for sure.)
It is possible that doing a dirty overflash of factory 4.2.2 (of only the boot partition & system partition) via fastboot would succeed, but I would feel a lot more comfortable about doing that in the sequence JOP40C->JOP40D->JDQ39 where you are converting a 4.2.x ROM to a later version. In your case though, coming from a 4.1.x ROM (JZO54K), that seems like there could be downstream problems.
The conservative route would be to take as many backups as you feel are appropriate, e.g. Nandroid + TiBu or Carbon, reinstall the full factory 4.2.2 stock (including bootloader!), re-root, and then restore your market apps & data (TiBu or Carbon). Note that because we have no idea what the changes/bug fixes were in the 4.18 bootloader update, you probably want to make sure you install the 4.18 bootloader first (and make sure to reboot to it!) before doing any of the subsequent steps (partition erasures & formatting, in particular).
I wouldn't do anything at all, though until I had succeeded making a full Nandroid backup and making sure I had a copy of it off of the tablet. Do your Nandroid backups succeed?
bftb0 said:
Well that is bizarre.
Some boot kernel/ramdisk configurations use a "errors=remount-ro" mount option with ext4 filesystem that automatically prevents a "rw" mount if corruption was detected in the ext4 filesystem meta-data.
Although when the mount of /system succeeds in 4.2.2 stock I don't see that - this is what you get:
Code:
adb shell cat /proc/mounts | grep system
/dev/block/platform/sdhci-tegra.3/by-name/APP /system ext4 ro,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
I also don't see that option in use with TWRP 2.4.1.0 either:
Code:
adb shell cat /proc/mounts | grep system
/dev/block/mmcblk0p3 /system ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
It's just a hypothesis - but perhaps somehow your /system partition got damaged?
I am reluctant to continue giving advice since your device is behaving non-nominally. (I never used JZO54K, so I can't say for sure.)
It is possible that doing a dirty overflash of factory 4.2.2 (of only the boot partition & system partition) via fastboot would succeed, but I would feel a lot more comfortable about doing that in the sequence JOP40C->JOP40D->JDQ39 where you are converting a 4.2.x ROM to a later version. In your case though, coming from a 4.1.x ROM (JZO54K), that seems like there could be downstream problems.
The conservative route would be to take as many backups as you feel are appropriate, e.g. Nandroid + TiBu or Carbon, reinstall the full factory 4.2.2 stock (including bootloader!), re-root, and then restore your market apps & data (TiBu or Carbon). Note that because we have no idea what the changes/bug fixes were in the 4.18 bootloader update, you probably want to make sure you install the 4.18 bootloader first (and make sure to reboot to it!) before doing any of the subsequent steps (partition erasures & formatting, in particular).
I wouldn't do anything at all, though until I had succeeded making a full Nandroid backup and making sure I had a copy of it off of the tablet. Do your Nandroid backups succeed?
Click to expand...
Click to collapse
Thanks for all your help, as this is going to be quite a bit more complex than first thought I'm going to leave the above until I come back from holiday.
Thanks again.
You can always tell when there's a technical guru around... they use wonderful phrases like "...since your device is behaving non-nominally...".
bftb0, your posts, as ever, continue to be hugely informative and a delight to read...
----------
Hi, jonchill... (when you return from your holiday)...
Here's what I would try...
When I'm poking around in /system (usually for something more prosaic, like changing the BOOTANIMATION.ZIP), I use X-Plore File Manager (http://play.google.com/store/apps/details?id=com.lonelycatgames.Xplore&hl=en).
It's a ROOT capable DUAL pane file manager... so you should be able to copy the files directly into /SYSTEM/XBIN (setting one pane as your SOURCE, the other as your DESTINATION TARGET).
Once copied there, LONG PRESS on the respective files just copied, select PERMISSIONs from the context menu that appears, and set accordingly.
But first, you will have to go into CONFIGURATION>ROOT ACCESS and set X-Plore File Manager to SUPERUSER+MOUNT WRITABLE...
I have both these files (bttest and dexdump) in my xbin folder... and permissions for both are 755.
See my screenshots appended to this post.
Hope this helps...
Rgrds,
Ged.
-----------
PS. where did you get the OTA updater ZIP nakasi-JDQ39-from-JZO54K.da55f917.zip from? I've Googled around for it, but can't find it anywhere. Would be nice to have it in my collection.
GedBlake said:
You can always tell when there's a technical guru around... they use wonderful phrases like "...since your device is behaving non-nominally...".
bftb0, your posts, as ever, continue to be hugely informative and a delight to read...
----------
Hi, jonchill... (when you return from your holiday)...
Here's what I would try...
When I'm poking around in /system (usually for something more prosaic, like changing the BOOTANIMATION.ZIP), I use X-Plore File Manager (http://play.google.com/store/apps/details?id=com.lonelycatgames.Xplore&hl=en).
It's a ROOT capable DUAL pane file manager... so you should be able to copy the files directly into /SYSTEM/XBIN (setting one pane as your SOURCE, the other as your DESTINATION TARGET).
Once copied there, LONG PRESS on the respective files just copied, select PERMISSIONs from the context menu that appears, and set accordingly.
But first, you will have to go into CONFIGURATION>ROOT ACCESS and set X-Plore File Manager to SUPERUSER+MOUNT WRITABLE...
I have both these files (bttest and dexdump) in my xbin folder... and permissions for both are 755.
See my screenshots appended to this post.
Hope this helps...
Rgrds,
Ged.
-----------
PS. where did you get the OTA updater ZIP nakasi-JDQ39-from-JZO54K.da55f917.zip from? I've Googled around for it, but can't find it anywhere. Would be nice to have it in my collection.
Click to expand...
Click to collapse
Ged
The OTA was what I received automatically.
I've already got XPlore and have tried what you suggested but get Can't write to file /system/xbin/bttest can't move temp file to /system/xbin/bttest.
Thanks
I will be using this thread to post my scripts and link them to other threads as needed. For this thread, I am assuming you know what you're doing. You don't need mad hacking skills and you don't need to be an expert (I'm sure as hell not), but knowing your way around the file system and basic shell scripting are helpful.
Some background: I am using the stock ROM and kernel (SGS2 - GB27, SGS4 - MDC), so all of my tips revolve around using stock and all of my scripts (even the flashable ones) will work without flashing from recovery (just extract the script from the ZIP and execute it while the phone is in phone-mode - you know... powered on ).
You are welcome to use my scripts in your apps. I only ask that you give me some credit.
I am not responsible for bricking your phone. I have only tested my scripts on my personal Samsung Galaxy S2 and S4 from Sprint. You are welcome to try on your phone, but I offer no warranties or guarantees as to whether they will work or not. Back up your ****!
All of this requires root!
Below is a list of the scripts I have written for y'alls. Enjoy.
Custom df: Shows where irregular mounts ("mount -o bind") are mounted. [ Forum post | Download ]
Currently doesn't work on my SGS4.
Easily move Phonesky.apk and GoogleServicesFramework.apk to /system or /preload for Multi DPI Play Store. [ Forum post | Download ]
Untested on my SGS4, but there's no reason to think that it won't work.
Use your SGS2's internal SD card for Link2SD instead of making a second partition on your external SD card (although, depending on the setup, you may still need to make a tiny partition on your external SD card) and your external SD card as your internal SD card [ Forum post ]
Untested on my SGS4. I have no need for it.
Clean up Link2SD: Delete files associated with Link2SD when uninstalling it. It does not revert the links Link2SD makes. It only deletes the mount scripts. [ Forum post | Download ]
If you use the debuggerd script to enable init.d, running this script will cause you to lose init.d.
Untested on my SGS4, but there's no reason to think that it won't work.
Delete Samsung's bloatware from the Sprint SGS2. [ Forum post | Download ]
Untested on my SGS4, but there's no reason to think that it won't work; however, it was written specifically for the SGS2's bloatware. See thread S4 System Apps Safe To Remove for a list of SGS4 bloatware apps.
Google Home Launcher (from Kit Kat).
Works on Jelly Bean.
Below are some other tweaks.
You can use custom boot animations with the stock ROM. All you need to do is swipe a "/system/bin/bootanimation" binary file from another ROM (such as @rujelus22's Blu Kuban FL24 (ICS) or Blu Kuban GB27 (JB 4.1.2)), paste it into "/system/bin", and make it executable.
For JB 4.2.2, make sure the user and group are root and shell respectively. This doesn't seem to be a problem with JB 4.1.2 and below. It's also possible that my initial testing involved a boot animation that didn't work on my SGS4, so if it works with root as both user and group, then roll with it. :good:
Also for JB 4.2.2, use the file from a JB 4.2.2 ROM, such as The Blu Kuban S4.
You can enable init.d scripts very easily by renaming "/system/bin/debuggerd" to "/system/bin/debuggerd.bin", replace it with the following, and make both files executable. If "/system/bin/debugger.bin" already exists, then edit "/system/xbin/busybox run-parts /system/etc/init.d" into "/system/bin/debuggerd".
As with the above, make sure the user and group are root and shell.
Code:
[color=green]#!/system/bin/sh[/color]
LOG=/data/debuggerd.log
echo "$(date)" > $LOG
echo "init.d" >> $LOG
/system/xbin/busybox run-parts /system/etc/init.d 1>>$LOG 2>>$LOG
echo "$(date) finished" >> $LOG
echo debuggerd.bin launched >> $LOG
exec /system/bin/debuggerd.bin
Below are some tips.
Most of the things you can do with a custom kernel, you can do with the stock kernel, it just requires more work and more risk.
If you replace an odexed system app with a deodexed system app, make sure you delete the app's ODEX file (it's the same file name except with the extension .odex).
Conversely: if you replace a deodexed system app with an odexed system app, you better have the ODEX file to go with it.
You can clear the dalvik-cache without a custom kernel by deleting the contents of "/data/dalvik-cache". You can even delete an individual app's dalvik-cache by finding the file "/data/dalvik-cache/[email protected]@[email protected]" or "/data/dalvik-cache/[email protected]@[email protected]" and delete it.
You can manually uninstall a system app's update by finding the file "/data/app/.apk" and delete it.
You can manually delete all user data by deleting the contents of "/data/data". You can even delete an individual app's data by finding the folder "/data/data/" and delete it.
Making scripts and binaries executable:
They must be on an EXT formatted filesystem (e.g. /data, /system, /preload).
They must be at least readable and executable by the user 'shell' (755 (read/execute for all, write only for user - "u=rwx,a=rx" if your busybox supports that method) is what I usually use).
Code:
chown root:shell ""
chmod 755 ""
chmod u=rwx,a=rx "" # busybox must support symbolic modes
Changing file permissions requires read/write access to the filesystem on which the file resides:
Code:
mount -o remount,rw /system # make the /system partition read/write
mount -o remount,ro /system # make the /system partition read only
The stock kernel is considered "production" whether or not it's rooted; therefore, you cannot use ADB to push or pull files directly to or from protected partitions, nor run ADB as root, nor use ADB's remount command, so you have to use unprotected partitions as a sort of buffer. You can, however, access the ADB shell and issue the "su" command wherein you can use "cp" to copy files to or from protected partitions prior to using ADB to push or pull the desired file. However, there is an app aptly named [root] adbd Insecure by @Chainfire that patches the ADB daemon to get around this limitation.
Example:
Code:
c:/android-sdk> adb shell
[email protected]:/ $ su
[email protected]:/ # cp /system/bin/debuggerd /sdcard/debuggerd
[COLOR="green"]-- open a new command prompt window --[/COLOR]
c:\android-sdk> adb pull /sdcard/debuggerd debuggerd
c:\android-sdk> adb push debuggerd /sdcard/debuggerd
[COLOR="green"]-- switch to the first command prompt window --[/color]
[email protected]:/ # mount -o remount,rw /system
[email protected]:/ # cp /sdcard/debuggerd /system/bin/debuggerd
[email protected]:/ # chown root:shell /system/bin/debuggerd
[email protected]:/ # chmod 755 /system/bin/debuggerd
[email protected]:/ # mount -o remount,ro /system
Some noteworthy files and folders:
/proc/self/mountinfo: If you can read it, it tells you where your partitions and folder binds are mounted.
/proc/partitions: Shows all of your SD card's partitions, how many blocks each has, and their vold numbers (eg "179 1 30578964 mmcnlk0p1").
/dev/block/platform/dw_mmc/by-name: This folder contains symlinks to your internal eMMC's partitions indexed by what they are for (eg UMS for your internal SD card - "realpath /dev/block/platform/dw_mmc/by-name/UMS" will print out the device path (ie "/dev/block/mmcblk0p11")).
/dev/block/platform/dw_mmc/by-num: This folder is like the previous except that they are indexed by partition number (eg "p11").
/proc/version: Shows what version of Linux is currently being used.
/data/system/batterystats.bin: Delete this when your battery is fully charged and still plugged in to recalibrate it.
Footnotes:
For "/data/app", "/data/data", and "/data/dalvik-cache" files you need to know the package name. There are various apps that will tell you, including Link2SD (mentioned above), Titanium Backup, and the web URL of the app in the Play Store (ex: https://play.google.com/store/apps/details?id=com.devname.appname).
More:
Random boot sound using your notification sounds
Make ADB work for all users - Jelly Bean 4.2.2 (Updated 07/15/13 00:35 MST)
Stock ROM - SGS4 - init.d
No-data restore tips
SGS4 Bloatware Remover
Make apps run faster and increase battery life
Random boot sound using your notification sounds
The attached ZIP contains a script that can be run pre or post boot. It just needs to be executable.
Preboot requires init.d. See the OP for enabling it if you are on a stock rooted ROM and requires the file to be readable and executable ("chmod 755" works fine).
Postboot requires an app such as Scripter (ROM Toolbox) or Script Manager to execute the script at boot.
Requires the variable $RANDOM. You can make sure it's available from the command line ("echo $RANDOM").
Use this script at your own risk. I provide no warranties or guarantees.
What does this script do?
Check for carrier boot up sounds (sub folders in the "/system/media/audio/ui" folder) and moves them to "/system/media/audio/notifications" renaming them as needed.
Create symlinks in the above folders to "/system/media/audio/ui/PowerOn.ogg".
Check if "/system/media/audio/notifications/PowerOn.ogg" is present and copy it to "/system/media/audio/ui/PowerOn.ogg" it's not.
Count the number of files in "/system/media/audio/notifications".
Grab a random number between 1 and the number of files found inclusive (math notation: "[1, numFiles]").
Go through "/system/media/audio/notifications" and copy the file at index random to "/system/media/audio/ui/PowerOn.ogg".
Notes:
The stock file is included. If you want a different sound in its place, you can either comment out that line in the script and delete the "/system/media/audio/notifications/<subfolder>_PowerOn.ogg" files from "/system/media/audio/notifications" or just replace "/system/media/audio/notifications/PowerOn.ogg" with some other sound file and still delete the "/system/media/audio/notifications/<subfolder>_PowerOn.ogg" files from "/system/media/audio/notifications".
If you want more sounds, just copy them to "/system/media/audio/notifications" (OGG files only).
The script does not check for valid files and blindly renames the destination file to "PowerOn.ogg".
It does not look in "/sdcard/media/audio/notifications" or anywhere else for audio files.
I do not recommend using alarms or ringtones files as they are usually looped which can cause the media scanner to get stuck and overheat your phone or tablet - those files may continue to play even if you can't hear them.
If you can't hear a sound on boot, it is likely that the file is either invalid or has no audio (ex: my /system/media/audio/ui/BST/PowerOn.ogg has no audio).
It was tested and works on a Samsung Galaxy S2 (stock JB 4.1.2) and a Samsung Galaxy S4 (stock JB 4.2.2) both from Sprint and using stock kernels.
There's no obvious reason it won't work on other phones and tablets with other ROMs from other carriers.
Nice work E.
cerj said:
Nice work E.
Click to expand...
Click to collapse
:good:
Make ADB work for all users - Jelly Bean 4.2.2 (Updated 07/15/13 00:35 MST)
With Android 4.2.2, ADB now requires RSA keys. This poses a problem when attempting to connect to the device's ADB server from the device itself and the device won't ask for authorization unless it's connected via USB. Well, there's hope, yet.
For the following, I'm assuming you used my method for adding init.d support to your device.
Use these scripts at your own risk. I provide no warranties or guarantees.
Add the following script to /system/bin/debuggerd. If you use an alternate method, please note that it must be executed by the debugger daemon. You must do this first or you'll have to manually restart the debugger daemon after editing this file and executing the run-once script (next step), so edit this file first and save it.
Code:
if [ ! -e "/.android" ]; then
busybox mount -o rw,remount /
mkdir /.android
mount -o bind /data/.android /.android
busybox mount -o ro,remount /
fi
Then run this script once from the device (not over ADB on your PC).
Code:
[COLOR="Green"]#!/system/bin/sh[/COLOR]
HOME=/data
adb kill-server
adb start-server
stop adbd
cat /data/.android/adbkey.pub >> /data/misc/adb/adb_keys
echo "" >> /data/misc/adb/adb_keys # Add a blank line at the end of the file
start adbd
HOME=/
adb kill-server
stop debuggerd
start debuggerd
Notes:
You can also find the abdkey.pub file on your Windows' PC here, C:\Users\<user name>\.android\adbkey.pub. Copy it to your device by whatever means necessary, then append it to /data/misc/adb/adb_keys and you won't need to initially use the USB to allow the PC connection. Not really necessary unless your PC has no USB or you've broken your USB cable.
This may have inadvertently corrected the mounting issue introduced in Jelly Bean 4.2.2.
You can also allow other Android 4.2.2 devices, but it requires ADB version 1.0.31 and for you to manually append the contents of /data/.android/adbkey.pub from device A (the one you want to use to ADB on) to /data/misc/adb/adb_keys on device B (the target device).
Don't delete /data/.android
This won't fix apps. Just allow you to use ADB to connect to your device from itself.
Tested on my SGS4. No reason it won't work on other devices.
If you already have a /data/.android directory, you may not need to do this. On my SGS4, HOME defaults to "/" which the ADB daemon can't write to, so it can't make the RSA key.
The run-once script temporarily changes HOME to "/data", a writable directory, so the ADB daemon can write the RSA key then it append it to the allowed clients file then restarts the debugger daemon thus binding /data/.android to the /.android directory allowing all Linux users ADB access to the device.
Reassigning HOME to a new value on one user only changes its value for that user which is why I'm binding /data/.android to /.android.
Code:
# Example
[email protected]:/ $ echo $HOME
/
[email protected]:/ $ HOME=/data
[email protected]:/ $ echo $HOME
/data
[email protected]:/ $ su 1000
[email protected]:/ $ echo $HOME
/
Alternatively (much easier):
Make the .android folder in /data (mkdir /data/.android).
Add the script, the first code block in this post, to your debuggerd file or an init.d script.
Restart the debugger (stop debuggerd; start debuggerd) or reboot the phone.
Restart ADB (stop adbd; start adbd).
Copy the newly created public key to the allowed clients (cat /data/.android/adbkey.pub >> /data/misc/adb/adb_keys; echo "" >> /data/misc/adb/adb_keys).
Restart the ADB server (adb kill-server; adb start-server).
SGS4 Bloatware Remover
I have written a live-script to delete all of the SGS4 bloatware except GoogleContactsSycAdapter and SecLauncher3. If you want to delete those, remove the "#" from that line in the script. If you want to exclude an app, add a "#" to that line and put the app name in quotes (ie AppName / becomes "#AppName" / (including the forward slash) or just remove that line. If you remove the last item (YouTube in this case), remove the forward slash from the previous line.
Use this scripts at your own risk. I provide no warranties or guarantees.
What this script does:
Move the app's APK and ODEX to /sdcard/SystemAppsBackup.
Delete its dalvik-cache.
Reboot the phone. If it doesn't reboot, you'll have to do this yourself.
What this script does not do:
Delete the app's data. Because the script doesn't know the package name.
Delete its Play Store update (located in /data/app). Because the script doesn't know the package name.
Mount the SD card if it's not mounted. If you want backups, make sure the SD card is mounted.
Care if you delete a system app you wanted to keep. Most apps that you would want to keep may be available in the Play Store.
Restore apps.
Notes:
Apps will crash left and right when you execute this script in running mode. Don't fret, this is normal.
This is a live-script which means you have to manually execute the script either with a terminal emulator, a script executor like Scripter, or ADB.
This is not flashable.
If executing via ADB in Recovery mode, you may need to mount the SD card to /storage/sdcard0 manually or settle for no backups.
If you restore an app from /sdcard/SystemAppsBackup, make sure you get the ODEX file if present and set the permissions for both to 644.
This list is based off the list in the thread, S4 System Apps Safe To Remove.
Here You Go Guys, I took me about 30 mins, but I have successfully added all the app in the Op to a flashable Zip.
The Zip is base of TrulyClean v1.6 script code, I just deleted his ;delete/system/...apk and replaced it with all the ones from the OP
bigtobitobs said:
Here You Go Guys, I took me about 30 mins, but I have successfully added all the app in the Op to a flashable Zip.
The Zip is base of TrulyClean v1.6 script code, I just deleted his ;delete/system/...apk and replaced it with all the ones from the OP
Click to expand...
Click to collapse
Looks like you're deleting bloatware, perhaps you should post that in the right thread... or at least a more appropriate thread.
Sent from my SGS4.
egingell said:
Looks like you're deleting bloatware, perhaps you should post that in the right thread... or at least a more appropriate thread.
Sent from my SGS4.
Click to expand...
Click to collapse
LOL OMG I am so sorry, I had multiple tabs open and put this in the wrong forum. Please Delete
bigtobitobs said:
LOL OMG I am so sorry, I had multiple tabs open and put this in the wrong forum. Please Delete
Click to expand...
Click to collapse
Would that I could.
Sent from my SGS4.
Make apps run faster and increase battery life using Xposed App Settings.
Did you install GravityBox on your SGS4 then uninstall it and now you can't hear your games or music?
I think it has to do with GravityBox's "Volume Steps" option not undoing when GB is uninstalled. This is how I fixed it (forum post).
Stock ROM - SGS4 - init.d
I recently found out that my debuggerd hack to enable init.d support on my stock SGS4 wasn't working. So, I did this and now it works.
Make a file named "install-recovery.sh" and drop it into /system/etc. Whatever script you put in here will execute at boot up so long as the user/permissions are correct.
Code:
chown shell:shell "/system/etc/install-recovery.sh"
chmod 755 "/system/etc/install-recovery.sh"
chmod u=rwx,a=rx "/system/etc/install-recovery.sh" # busybox must support symbolic modes
Use this script at your own risk. I provide no warranties or guarantees.
My "/system/etc/install-recovery.sh" script:
Code:
[COLOR="Green"]#!/system/bin/sh[/COLOR]
LOG="/data/install-recovery.log";
echo "Executing install-recovery.sh" > $LOG;
echo "" >> $LOG;
echo "$(date) install-recovery hack..." > $LOG
echo "" >> $LOG
echo "init.d" >> $LOG
[COLOR="green"]# I can't get run-parts to work for some reason, but this will run every *.sh script in /system/etc/init.d as root.[/COLOR]
for N in /system/etc/init.d/*.sh; do
su -c "$N" 1>>$LOG 2>>$LOG
done;
Notes:
Mount binding (in JB 4.2.2+) seems to work. E.g. mount -o bind /folder1 /folder2
$(date) does not provide the correct date (mine said: "Wed Apr 15 13:24:13 MST 1970").
The Package Manager is not available. (There may be other unavailabilities, but I don't intend to test it thoroughly.)
Somethings I discovered recently while doing a no-data system restore for the second time in the same night and some tips relating to system restores:
* When doing a no-data restore, disabled/frozen system apps remain disabled.
* Apps that can't be disabled even with Titanium Backup will not remain disabled after a reboot and will sometimes crash/FC repeatedly until uninstalled.
* If an app won't open or FCs, try converting it to a system app and back to user app or vice versa.
* Don't integrate system app updates into the ROM. In the event that you have to do a no-data restore, those updates will be retained.
* Don't convert user apps to system apps for the same reason.
* Disregard the previous two tips if disk space is a problem. It's just more time consuming (redownloading updates, reintegrating, and reinstalling) after a restore.
* Save all modified system files, such as /system/bin/debuggerd, /system/build.prop, /system/etc/install-recovery.sh, and if your ROM uses /system/etc/unit.d, any modified or extra files there. If you use them, you'll need them after a restore.
* For a smoother post no-data restore, use Titanium Backup's labels so you can batch-uninstall those pesky system apps you don't want.
SGS2 - JB 4.1.2 GB27
SGS4 - JB 4.2.2 MF9
any command for updater script to make directory in root of android ??
HassanMirza01 said:
any command for updater script to make directory in root of android ??
Click to expand...
Click to collapse
Creating directories in / and all the files contained therein must be redone on every boot. That said, you just need to make root writable and make the directory.
mount -o remount,rw /
mkdir /whatever
mount -o remount,ro /
Note: Every time you wish to create, modify, or delete files you'll have to make root writable.
Sent from my LG-H811 using Tapatalk
egingell said:
Creating directories in / and all the files contained therein must be redone on every boot. That said, you just need to make root writable and make the directory.
mount -o remount,rw /
mkdir /whatever
mount -o remount,ro /
Note: Every time you wish to create, modify, or delete files you'll have to make root writable.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Actually.... I wanna add some files within folder in root of android root... So i need to use above three commands nd then after making directory, i should extract files to that folder ??
HassanMirza01 said:
Actually.... I wanna add some files within folder in root of android root... So i need to use above three commands nd then after making directory, i should extract files to that folder ??
Click to expand...
Click to collapse
Yes.
Sent from my LG-H811 using Tapatalk
:good: