i flashed xboxmod win7 rom and i want to get back to stock or android at least can someone help me out?
Download the rom that is for your phone from HTC. Extract the contents of the exe file. Then take the .nbh file should be about 150mb and rename it to leoimg.nbh. Put that on your SD card.
Next restart your phone while holding down the volume down key and it will go into the boot loader. It will then prompt you to restore your phone. Follow on screen instuctions.
Make sure you get the right rom for your phone! This will bring it back to full factory settings. You can then reinstall hspl and start again. Good luck!
Related
ok so i unrooted my phone to stock then used kitchen to auto root it and all worked great. then I put the recovery 1.5.3 i think it was on my root of sd card, and also had fresh 1.1 on it as update.zip
but everytime I apply it i get errors, now EVERYTHING works but I dont have service and settings force close.
should I wipe then install 1.1. or just upgrade from stock wen its rooted?
or maybe try 1.0 first with clean install or wipe?
thanks
If I were you, do this. RUU the phone to put it back to complete stock settings. Then, run the Auto-rooter in the Pre-Kitchen. This will put it to the latest recovery image. Then, just flash Fresh 1.1 to it, and then you'll be up to date.
you flash the recovery image dif then as if you were flashing a rom
wait so put recovery-RA-heroc-v1.5.2 on the root of card and change name to update and apply that, then delete that off root of card, put on fresh 1.1 rom and name it update then flash that?
can I do a clean install? or just update?
1. Find the recovery image you want and MAKE SURE IT IS FOR YOUR PHONE (should say in where you download it what phone it is for).
2. Write down the filename of the recovery image EXACTLY as it is written (i.e. RA-Hero-Recovery-v1.2.2.img).
3. Put the recovery image file on the SD card (not in any folders).
4. Download Terminal from the Market if you don’t already have it and install it (there are a few different terminals in the Market ,
5. Open the Terminal program and type the following (with hitting enter at the end of each line):
su
flash_image recovery /sdcard/name-of-recovery.img
6. In the above text, replace name-of-recovery.img with the name of your recovery image (make sure the .img is on the end).
7. Phone should pause for a second and then show you a new blank line. Turn it off and back on by holding down Home and Power to ensure it flashed correctly. Done.
__________________
on another note you should change the title of this thread to user confusion has nothing to do with fresh rom ....might be confusing to some
As opposed to posting it in the FreshROM thread, had it really been a FreshROM issue.
702DROID said:
1. Find the recovery image you want and MAKE SURE IT IS FOR YOUR PHONE (should say in where you download it what phone it is for).
2. Write down the filename of the recovery image EXACTLY as it is written (i.e. RA-Hero-Recovery-v1.2.2.img).
3. Put the recovery image file on the SD card (not in any folders).
4. Download Terminal from the Market if you don’t already have it and install it (there are a few different terminals in the Market ,
5. Open the Terminal program and type the following (with hitting enter at the end of each line):
su
flash_image recovery /sdcard/name-of-recovery.img
6. In the above text, replace name-of-recovery.img with the name of your recovery image (make sure the .img is on the end).
7. Phone should pause for a second and then show you a new blank line. Turn it off and back on by holding down Home and Power to ensure it flashed correctly. Done.
__________________
Click to expand...
Click to collapse
I know that you know that the auto rooter does all of that for you.
No renaming RA to update.zip or anything like that. RUU to get your phone back to stock. Then run the auto-rooter. This gives you a stock but rooted phone, with RA as your recovery image. You will then be able to install fresh rom. That's all!
edit/removed
flipzmode said:
I know that you know that the auto rooter does all of that for you.
No renaming RA to update.zip or anything like that. RUU to get your phone back to stock. Then run the auto-rooter. This gives you a stock but rooted phone, with RA as your recovery image. You will then be able to install fresh rom. That's all!
Click to expand...
Click to collapse
didnt want to confuse him anymore then he already is
ok did RUU and the kitchen and did auto rooter. running 1.5.2.
Just downloaded fresh 1.1
going to put it into the root of sdcard and rename the fresh rom to, "update"
then power down phone, power back on and ok should I wipe phone then apply update zip
or
not wipe and just apply zip?
then once I apply just then choose reboot and basically thats
You don't need to wipe. RUU puts your phone back to bone stock.
You shouldn't need to rename FreshROM to update either.
ohh, ok that was my biggest problem i think, im used to my g1 and i always renamed the rom to update.zip
so keep it fresh-cdma-hero-1.1
and apply update
i searched for some time now and cant find a way to downgrade to windows again coming from dual boot wp7 and android, i know the thread is out there so if somebody can post the link here that would be great thanks.
Flash stock rom which is correct for your phone from SD card.
danc3o0 said:
i searched for some time now and cant find a way to downgrade to windows again coming from dual boot wp7 and android, i know the thread is out there so if somebody can post the link here that would be great thanks.
Click to expand...
Click to collapse
If you can go into bootloader screen (the four color screen), you can flash via micro sd card method.
Download your CORRECT STOCK ROM. Extract it, and find the fie named : RUU_signed.nbh . Rename it to : leoimg.nbh.
Turn off your phone, remove your sd card, and put it in a card reader.
Copy the "leoimg.nbh" as mentioned above to the root of your micro sd card. Before copy it, it is advisable to format the sd card and not to put other files except that leoimg.nbh.
Now, reinsert your micro sd card back to the phone. Then, press the volume down button AND the power on button, AT THE SAME TIME, until the four color screen appear (bootloader screen). This will flash winmo rom as well as replace your SPL/HSPL to the stock SPL contained in the Stock rom.
Now go into bootloader screen as mentioned earlier. And follow the on screen instruction to flash the rom. Done.
Keep in mind that if you have HSPL installed, you can flash it with custom rom.
Goodluck
Hi,
Run a task 29 (search in forums)
Then run the HSPL and change it to a stock spl
Download the latest RUU from the official site
Remember use always the bootloader menu (vol down+power)
Downloaded a rom from forum and gapps with gtalk video, installed thru rom manager. Rom just stays on boot screen, so i went into recovery to go back to my previous rom but when I hold down volume down and power it takes me to hboot radio v2 update. Cannot go into recovery, just asked if I want to update or not. Is there another way to get to recovery?
Stuck on hboot cannot scroll down to recovery
your problem is that you have your radio file to flash still on the root of your SD card. take out your SD card and put it in another phone or to your computer and delete the PD15IMG.zip (RADIO file) and put it back in your phone and try again. im guessing you have the eng hboot which is why it wants to flash the radio file when it sees it.
Thanks maf2003 I appreciate the help
I update my phone to oxygen ROM last version but i have had some problems and the whole system is not stable a lot of error messages and etc...
so i changed back the recovery image to the original one then i tried to format the phone the process is done but it takes me to the same oxygen copy !!
what is the problem ??
Changing the recovery image is NOT how you go back to Stock Rom.
Download the stock Rom and copy it on SD card folder called "dload". Then switch off the phone, press Vol+,Vol- and Power for 5 seconds, to start the Stock Rom installation.
katu2006 said:
Changing the recovery image is NOT how you go back to Stock Rom.
Download the stock Rom and copy it on SD card folder called "dload". Then switch off the phone, press Vol+,Vol- and Power for 5 seconds, to start the Stock Rom installation.
Click to expand...
Click to collapse
Where can I get one, huwaui site is not working?
I was installing Gingerbread on my HTC HD2, but I extracted the files in the gingerbread zip. He said not to extract it. I did not read that part. Now I have no zip to use with clockworkmod. I dont know what to do, I cant bypass the screen. Is there anyway to reset my phone to stock so I can redo this all over again? Please help me.
Or is there a way to by pass it?
Help me! I want my phone to be stock again!
If you cant bypass it how can I uninstall MAGLDR!!
ImNewHelp said:
I was installing Gingerbread on my HTC HD2, but I extracted the files in the gingerbread zip. He said not to extract it. I did not read that part. Now I have no zip to use with clockworkmod. I dont know what to do, I cant bypass the screen. Is there anyway to reset my phone to stock so I can redo this all over again? Please help me.
Or is there a way to by pass it?
Help me! I want my phone to be stock again!
If you cant bypass it how can I uninstall MAGLDR!!
Click to expand...
Click to collapse
bootloader> task29> rum windows mobile
That simple
[/COLOR]Erm, why would you need to do any of it again? You unzipped the rom,,, so what? Delete what you unzipped, get the zip again, put it on SD without unzipping, start phone with power held --> magldr option 8 ad recovery --> starts cwm, from there choose 'wipe data factory reset' just to be sure the partitions are clean (i(f you are gonna make an sd ext partitiom now would be the time))then 'install zip from sd ' job done.
I would have to agree with samsamuel. there is no need nor would "bootloader> task29> rum windows mobile" fix your issue. You only need to delete the unzipped version off your SD card and replace it with the zipped version. Then follow the instructions where you left off at.
[Q] HELP ME! I dont know how to uninstall MAGLDR
[A].. to uninstall magldr is to do:
1 task 29 (wipe all data and NAND)
.. to install Android on your HD2 you must do this:
1. Power on hd2 pressing vol down (three color display) and attach USB cable
2. Flash MAGLDR113 (phone is restarted and booted in magldr menu)
3. In menu with vol key select USB Flasher confirm key is green
4. Flash MAGLDR CWR 5.0.2.6 (partition size depends of the rom you are flashing)
5. Wait for magl menu and select AD Recovery (8) then select:
-mounts and storage
-mount USB storage and copy zip file from comp to sd card,go back (unmount) pres key arrow to go back to
-based recovery and select
-install zip from sdcard
Wait to ends,boot and you have android installed on your HD2!!!!
I'm kind of lost why you want to uninstall MAGLDR. If you want your phone to be stock windows mobile download your official stock rom. Extract it to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse you back to stock. I would do a search for help 1st. There are many threads already about how to flash back to stock.
What you only need to do is give a little clearer instructions on what your problem is, where your stuck at and what your trying to do.