Bizarre charging issue and how I fixed it. - Eee Pad Transformer General

I had a bizarre issue with my Transformer not charging today.
I just got an AC power inverter for my car to charge the TF during trips. Tried it out this morning on my way to work and it didn’t show it was charging. Also strangely the screen would not respond to touch input until I unplugged the charger cable. This happened every time I tried to charge it off the inverter. So…. I get to work and WTF the TF would not charge on any AC outlet! Tried reseating the country specific prongs with no luck. Rebooted the TF with no luck. Cable worked to connect to PC so I figure it is ok. Called Asus thinking the inverter fried the charger and got an RMA. In the meantime I ordered a new Asus charger from Office Depot online and drove to pick it up over lunch. Got it back to the office and tried to charge the TF. WTF it still won’t charge! Tried all the combos of charger to cable, different outlets, etc. with no luck. Then I start to get worried the TF is hosed. As a last ditch effort I try a nandroid restore. Bam…boot loop. Finally after trying a few other things I do a dirty flash of the rom on the TF. It fixes boot loop and miraculously it starts charging again. I’m wondering if some of the charging issues have nothing to do with the charger but are software related. I was running Roach’s CWR, Prime 1.7 and his OC kernel when the problem started. Now still on his CRW and Prime 1.7 with stock kernel. Going to try the inverter again on the way home with this setup and see if it happens again and then reflash kernel and test to see if I can recreate it.
Update:
Well it charges now but will not accept any touch input on screen when charging cable is connected.

Johnny_Sokko said:
I had a bizarre issue with my Transformer not charging today.
I just got an AC power inverter for my car to charge the TF during trips. Tried it out this morning on my way to work and it didn’t show it was charging. Also strangely the screen would not respond to touch input until I unplugged the charger cable. This happened every time I tried to charge it off the inverter. So…. I get to work and WTF the TF would not charge on any AC outlet! Tried reseating the country specific prongs with no luck. Rebooted the TF with no luck. Cable worked to connect to PC so I figure it is ok. Called Asus thinking the inverter fried the charger and got an RMA. In the meantime I ordered a new Asus charger from Office Depot online and drove to pick it up over lunch. Got it back to the office and tried to charge the TF. WTF it still won’t charge! Tried all the combos of charger to cable, different outlets, etc. with no luck. Then I start to get worried the TF is hosed. As a last ditch effort I try a nandroid restore. Bam…boot loop. Finally after trying a few other things I do a dirty flash of the rom on the TF. It fixes boot loop and miraculously it starts charging again. I’m wondering if some of the charging issues have nothing to do with the charger but are software related. I was running Roach’s CWR, Prime 1.7 and his OC kernel when the problem started. Now still on his CRW and Prime 1.7 with stock kernel. Going to try the inverter again on the way home with this setup and see if it happens again and then reflash kernel and test to see if I can recreate it.
Update:
Well it charges now but will not accept any touch input on screen when charging cable is connected.
Click to expand...
Click to collapse
Sounds like there could be some EMI going on. Someone else made their touchscreen stop responding by putting a plasma ball too close to their TF. Try running the USB cable out the car window as far as it will go before connecting the TF, but keep the inverter inside the car's Faraday effect(inside the car, away from the window). This is just to test the theory, obviously not a fix.

Many of the inexpensive inverters are poorly filtered and almost always produce a modified sine wave ( not a pure sine wave) This is not friendly to most electronic devices. Add that to the fact that the TF AC adapter is a minimal design to start and you have all the elements for disaster. If you are looking for an auto adapter, search for Devcake's thread on the subject. There is a lot of good technical info there as well as several suggestions for Auto adapters. Your best bet is to get a DC/DC converter that will get you 11-14V DC out to a USB style connector.

Thanks for the suggestions. Looks like the inverter is going bye bye.

Rumbleweed said:
Many of the inexpensive inverters are poorly filtered and almost always produce a modified sine wave ( not a pure sine wave) This is not friendly to most electronic devices. Add that to the fact that the TF AC adapter is a minimal design to start and you have all the elements for disaster. If you are looking for an auto adapter, search for Devcake's thread on the subject. There is a lot of good technical info there as well as several suggestions for Auto adapters. Your best bet is to get a DC/DC converter that will get you 11-14V DC out to a USB style connector.
Click to expand...
Click to collapse
I still don't see why everyone is insisting on using a regulator. Cars already put out 11-14VDC. You do not need conversion or regulation. If you are seriously paranoid, add a 4.5Ω 30W resistor and a 220µF cap to limit and decouple.

Johnny_Sokko said:
Thanks for the suggestions. Looks like the inverter is going bye bye.
Click to expand...
Click to collapse
hit thanks button!

msticninja said:
I still don't see why everyone is insisting on using a regulator. Cars already put out 11-14VDC. You do not need conversion or regulation. If you are seriously paranoid, add a 4.5Ω 30W resistor and a 220µF cap to limit and decouple.
Click to expand...
Click to collapse
stick a scope on the 12v assy connector then start the car. nasty spikes

Rumbleweed said:
stick a scope on the 12v assy connector then start the car. nasty spikes
Click to expand...
Click to collapse
I've done it multiple times. I haven't seen a spike on any car made after 1980. Even with a spike, it couldn't last long enough to fry the TF's charging circuit, or it would fry 90% of the cigarette outlet adapters on the market. If you have the one car in the world that does spike, you could always unplug the TF while starting the car.

Related

JasJar won't charge any more...any ideas?

I just posted on the accessories forum about my experience with the Brodit active holder that I purchased. Mounted it in my car, and plugged the brodit charger in. Fuse in car charger went bang (not literally). Now I know it's not my power adapter in the car, as I've been using another JasJar charger and GPS charger for ages, so I went to Halfords and bought some replacement fuses. Tried them in the charger. Every one died too instantly.
I assumed the charger must be faulty, and arranged to send the holder back to Clove to replace it. It wasn't until I plugged my JasJar into the normal charger last night that I discovered it was no longer charging at all. I tried unplugging and replugging. I tried using the USB cable in my pc. Nothing works. Even the other car charger won't charge it any more.
I'm guessing I now have to send my JasJar to HTC for repairs and be without it for a couple of weeks. I'm not too happy about it though, and thought I would ask here first if this has happened to anyone else and if there might be a way to get it charging again without having to send it away.
i had a similar problem, i went to france with a charger that had a changable head, with pins for the different countries on click in plates, and on the top was a usb socket.
i took a standard usb to mini usb cable with me figuring this is a usb charger like the one that came with my phone but no, i couldnt get it charging, then after 12 hrs of it refusing, it eventually kicked back in, i sussed you had to use it like plugging it into a pc, ie, it turn it off, wait, then plug it in. bingo it started charging again.
its working like activesync, right pain, shoulda just taken me charger and a mains convrter
sorry it doesent really help but its poss related
Carnivor said:
i had a similar problem, i went to france with a charger that had a changable head, with pins for the different countries on click in plates, and on the top was a usb socket.
i took a standard usb to mini usb cable with me figuring this is a usb charger like the one that came with my phone but no, i couldnt get it charging, then after 12 hrs of it refusing, it eventually kicked back in, i sussed you had to use it like plugging it into a pc, ie, it turn it off, wait, then plug it in. bingo it started charging again.
its working like activesync, right pain, shoulda just taken me charger and a mains convrter
sorry it doesent really help but its poss related
Click to expand...
Click to collapse
similar problem. but i change the port miniusb. 30 dolares in mexico.
no problem, is easy. and now is working ok.
Well I've sent it in for repairs now. Couldn't get the thing to charge.
this forum is amazing...if there is an information available, you can bet it you can find it here...:
thanks carnivor: I had the same problem, but just was not smart enough to get the idea to shut it off and then on...with your help i solved the problem...i still don't get it, why it did charge with the original charger or with the usb cable from the pc and not with the generic usb charger and that same cable....and actually: it depended on the ROM installed: with the qtek rom it did not matter, with the t-mobile it did..
anyway: now it works. thanks!
I notice that the power lead is thinner than a usb lead so there may be less wires inside, ie 2 + ground instead of 4 + ground, the lack of TX and RX connections may well be what causes it. Im not going to hack into the charger cable just yet to find that out.
Intresting about the rom versions changing the fact if you can have device on before sync or not. Im not going to reflash now with an update around the corner im just going to wait for that.
notice that the power lead is thinner than a usb lead so there may be less wires inside, ie 2 + ground instead of 4 + ground, the lack of TX and RX connections may well be what causes it.
Click to expand...
Click to collapse
yes, but interestingly it also doesn't work with the same cable that syncs and charges from the pc, when this cable is connected to the lighter or the generic USB charger...so the mess starts already in the charger.
but bottomline: as long as there's a workaround...

Galaxy Tab charging issue + solution

Hey guys - I've been dealing with a Tab charging issue for a few days, and finally solved it... but I thought I'd post the problem and solution here in case it can save someone else a load of frustration if they run into the same problem.
From what I've read, we know that the Tab only draws .5A power from a USB socket, but that it draws ~2A from the wall, and that it knows the difference by testing for a short on the TX/RX USB data wires. (Correct me if I'm wrong on the details, but that's the general impression I've gotten.) We also know that the iPhone/iPad/iPod uses a pair of resistors instead (per the USB spec) to determine the current-delivery capability of the source. (I'm no EE, so I'm a little fuzzy on how that works from a technical perspective.)
So to set the stage: I had brought the USB cable for my Tab with me, but had neglected to grab the USB->outlet adapter for the mains. Similarly, a friend who was on vacation with us had forgotten the charging cable for his iPhone. Thinking I was killing two birds with one stone, I bought an aftermarket USB charging cable for the iPhone which had a separate USB->outlet adapter. His iPhone charged swimmingly, and when I charged my Tab overnight (screen off, starting at ~89% charge) using my cable and the aftermarket adapter, it worked flawlessly. No problem, great solution, or so it seemed...
...until I got home. Suddenly, my Tab wouldn't do more than a trickle charge - the same charge it gets when connected to the USB port on my laptop. (I could tell this was the case because of the small red 'x' next to the charging symbol in the battery icon - which I hadn't noticed while on vacation.) A 2.5-hour car trip using Navigator (screen on the whole time), even with the car charger connected, killed the battery completely. No matter what I did - shutting down apps, rebooting the device, resetting every option I could find - I could not get a fast charge to happen. Even leaving the device plugged in overnight resulted in *less* charge than what I started with if I didn't turn the screen off. I called T-mobile, talked to Samsung tech support twice... and all they could offer was to have me send the Tab back for replacement.
I was at a loss. I nearly did a hard reset in frustration, thinking I had screwed something up royally.
Then I saw the resistors in the pictures in this post:
http://forum.xda-developers.com/showthread.php?t=845844&page=3
and something clicked. I had been assuming that the *cables* were the difference between the iPhone and Tab chargers... but there isn't enough room for resistors in the cables! (Well technically, there is, but regardless...) The resistors must live somewhere else... and, I reasoned, that somewhere must be inside the USB->outlet adapter. So I pulled out the 'proper' Samsung adapter, plugged in the Tab, and voilà... a perfect fast charge.
So this is why the Tab won't charge with an iPod (or Sony-Ericsson, as it turns out) mains USB adapter OR USB-port car charger: the circuitry to let the device know it's capable of a full 2A delivery doesn't live in the Samsung cables; it's only present in the adapter. If that's not there, the device thinks it's connected via USB (and will, in fact, say "USB Connected" every time the charger is plugged in) and won't charge more than a trickle.
So that's my story, and hopefully it can save someone else some pain and frustration. Thanks for giving me the floor.
mattcelt said:
Hey guys - I've been dealing with a Tab charging issue for a few days, and finally solved it... but I thought I'd post the problem and solution here in case it can save someone else a load of frustration if they run into the same problem.
From what I've read, we know that the Tab only draws .5A power from a USB socket, but that it draws ~2A from the wall, and that it knows the difference by testing for a short on the TX/RX USB data wires. (Correct me if I'm wrong on the details, but that's the general impression I've gotten.) We also know that the iPhone/iPad/iPod uses a pair of resistors instead (per the USB spec) to determine the current-delivery capability of the source. (I'm no EE, so I'm a little fuzzy on how that works from a technical perspective.)
So to set the stage: I had brought the USB cable for my Tab with me, but had neglected to grab the USB->outlet adapter for the mains. Similarly, a friend who was on vacation with us had forgotten the charging cable for his iPhone. Thinking I was killing two birds with one stone, I bought an aftermarket USB charging cable for the iPhone which had a separate USB->outlet adapter. His iPhone charged swimmingly, and when I charged my Tab overnight (screen off, starting at ~89% charge) using my cable and the aftermarket adapter, it worked flawlessly. No problem, great solution, or so it seemed...
...until I got home. Suddenly, my Tab wouldn't do more than a trickle charge - the same charge it gets when connected to the USB port on my laptop. (I could tell this was the case because of the small red 'x' next to the charging symbol in the battery icon - which I hadn't noticed while on vacation.) A 2.5-hour car trip using Navigator (screen on the whole time), even with the car charger connected, killed the battery completely. No matter what I did - shutting down apps, rebooting the device, resetting every option I could find - I could not get a fast charge to happen. Even leaving the device plugged in overnight resulted in *less* charge than what I started with if I didn't turn the screen off. I called T-mobile, talked to Samsung tech support twice... and all they could offer was to have me send the Tab back for replacement.
I was at a loss. I nearly did a hard reset in frustration, thinking I had screwed something up royally.
Then I saw the resistors in the pictures in this post:
http://forum.xda-developers.com/showthread.php?t=845844&page=3
and something clicked. I had been assuming that the *cables* were the difference between the iPhone and Tab chargers... but there isn't enough room for resistors in the cables! (Well technically, there is, but regardless...) The resistors must live somewhere else... and, I reasoned, that somewhere must be inside the USB->outlet adapter. So I pulled out the 'proper' Samsung adapter, plugged in the Tab, and voilà... a perfect fast charge.
So this is why the Tab won't charge with an iPod (or Sony-Ericsson, as it turns out) mains USB adapter OR USB-port car charger: the circuitry to let the device know it's capable of a full 2A delivery doesn't live in the Samsung cables; it's only present in the adapter. If that's not there, the device thinks it's connected via USB (and will, in fact, say "USB Connected" every time the charger is plugged in) and won't charge more than a trickle.
So that's my story, and hopefully it can save someone else some pain and frustration. Thanks for giving me the floor.
Click to expand...
Click to collapse
I've recently seen (somewhere) a usb pigtail cable that shorts the pins to make the tab (or any other usb chargable phone) think it's hooked up to a wall charger, rather than a trickle charging usb port.... I need to find that again and just order a few to have in my various cable bags.
If you do find it again, please post it here. Definitely something I'd like in my bag of tricks as well.
Just as an FYI, the 2A charger that came with my Nook Color charges the Tab just fine from mains, even indicates charging. Makes sense, since both devices have a 4000mAH battery.
It's also a nicer unit for travel, it's nicely rounded, the prongs fold into the body of the charger, and you can pick it up from Barnes and Nobles stores just about anywhere in the US. Still doesn't solve the Tab cable issue though.
Croak said:
Still doesn't solve the Tab cable issue though.
Click to expand...
Click to collapse
I'm planning on hacking apart a spare Tab cable so that it goes to a female microUSB; no more multiple cable types then. The stock Tab cable doesn't appear to have more than 6 pins, of which I'm sure a few are grounds.
Someone recently posted a link to the first cheap 3rd-party cables:
http://www.dealextreme.com/details.dx/sku.51931
Get those with a 6' USB extension cable and the Nook charger, and that may be a winning combination. I ordered four the the charging cables yesterday, and I'll try to remember to post whether or not they work out well.
Resonance, what are you planning on using for a car charger, if any? I really like the Navigator app, but it's just not practical if I can't keep the Tab charged while using it.
Does anyone know if there are any USB->12v adapters that have the right circuitry for the Samsung? For that matter, do any other devices use the same amperage detection setup the Tab does? It would be good to know what components are cross-compatible.
Thanks for the info.
How about a list of chargers that work fine on the GTab.
1. Garminfone charger (1amp - works great and I use it as my primary charger)
mattcelt said:
Resonance, what are you planning on using for a car charger, if any? I really like the Navigator app, but it's just not practical if I can't keep the Tab charged while using it.
Click to expand...
Click to collapse
A 12V inverter, attached to the standard wall charger. :/
I bought the Duragadget 12V->USB charger, since it was advertised specifically as a 2A charger for the Galaxy Tab, but it DOES NOT work as advertised (the Tab treats it like a any other low-current USB port, and even offers to mount mass storage, heh).
Using the inverter and the wall charger worked just fine, though it was a bit clunky and unstable (on mine, the prongs aren't tightly gripped, so it bends out of place easily).
Does anyone know if there are any USB->12v adapters that have the right circuitry for the Samsung? For that matter, do any other devices use the same amperage detection setup the Tab does? It would be good to know what components are cross-compatible.
Click to expand...
Click to collapse
I'd been contemplating giving the Duragadget charger with integrated cable a try, but having been burned once by Duragadget, I'm a bit hesitant to do so.
ResonanceZero said:
Someone recently posted a link to the first cheap 3rd-party cables:
http://www.dealextreme.com/details.dx/sku.51931
Get those with a 6' USB extension cable and the Nook charger, and that may be a winning combination. I ordered four the the charging cables yesterday, and I'll try to remember to post whether or not they work out well.
Click to expand...
Click to collapse
OMG...I bought a charger cable from amazon SOLD BY AMAZON marketed as OEM samsung charger and I got the same one in the deal extreme page. WTF...paid $12 for it too.
ResonanceZero said:
A 12V inverter, attached to the standard wall charger. :/
I bought the Duragadget 12V->USB charger, since it was advertised specifically as a 2A charger for the Galaxy Tab, but it DOES NOT work as advertised (the Tab treats it like a any other low-current USB port, and even offers to mount mass storage, heh).
Using the inverter and the wall charger worked just fine, though it was a bit clunky and unstable (on mine, the prongs aren't tightly gripped, so it bends out of place easily).
I'd been contemplating giving the Duragadget charger with integrated cable a try, but having been burned once by Duragadget, I'm a bit hesitant to do so.
Click to expand...
Click to collapse
looks like that car charger is the same as the one you bought with a USB cable included.
nacron said:
looks like that car charger is the same as the one you bought with a USB cable included.
Click to expand...
Click to collapse
Good eyes. I thought it was a different unit with an integrated cable.
Has anyone found a functioning 12v charger?
yes, the verizon store has a 12v charger for the galaxy tab, but that was the only place I was able to find one... other than online.
Hi,
Can anyone else confirm that the Nook charger works for the Tab?
I've tried other high current (2.0+ amp) chargers. Some designed for the ipad and some not, and I always get the trickle charge icon and it's treated as a computer USB connection (Mass storage device options, etc).
How much was the Verizon charger?
Thanks!
stock wall charger works for me.
knowthenazz said:
Hi,
Can anyone else confirm that the Nook charger works for the Tab?
I've tried other high current (2.0+ amp) chargers. Some designed for the ipad and some not, and I always get the trickle charge icon and it's treated as a computer USB connection (Mass storage device options, etc).
How much was the Verizon charger?
Thanks!
Click to expand...
Click to collapse
Google the gobatt 2 charger. It comes with a usb adapter that charges the tab on any charger.
texasreb said:
Google the gobatt 2 charger. It comes with a usb adapter that charges the tab on any charger.
Click to expand...
Click to collapse
Hi,
Thanks for the tip. I can't find much information about the Scosche GoBatt 2 charger, or the adapter that comes with it. Today I tried other Scosche chargers, including their iPad charger, and it didn't seem to work.
Can you give some more details on the adapter that comes with the GoBatt 2?
Thanks!
Got this travel adapter by ZipKord with 2 - 1 amp outlets. Works with the OEM cord and also the Gomadic tip made for the Galaxy Tab. Just need to be careful it's not the older version that only has the lower power outlets. Cheapest I could find was $13+, so if it's less, it's the lower power. With the Gomadic tip and reractable cord, it says it's charging.
EVO 4G 9292 - Travel Adapter By ZipKord
Also this Scosche battery pack seems like it would work. Has 2 - 1 amp USB ports. I ordered one and should get it tomorrow.
Scosche IPDBAT2 Portable Back Up Battery for iPad and iPod
Oops - can't do links. Just search in Amazon. It's where I got both.
Gomadic cord and tips from Gomadic. Love losing the excess clutter (cords).
galaxy tab 7 charging while turned on
can someone explain well how to build the adaptor for charge galaxy tab 7 while it turned on?
is it possible to have a scheme with picture and some photos which describe the work to do?
thanks. and excuse me for bad english.
mattcelt said:
Hey guys - I've been dealing with a Tab charging issue for a few days, and finally solved it... but I thought I'd post the problem and solution here in case it can save someone else a load of frustration if they run into the same problem.
From what I've read, we know that the Tab only draws .5A power from a USB socket, but that it draws ~2A from the wall, and that it knows the difference by testing for a short on the TX/RX USB data wires. (Correct me if I'm wrong on the details, but that's the general impression I've gotten.) We also know that the iPhone/iPad/iPod uses a pair of resistors instead (per the USB spec) to determine the current-delivery capability of the source. (I'm no EE, so I'm a little fuzzy on how that works from a technical perspective.)
So to set the stage: I had brought the USB cable for my Tab with me, but had neglected to grab the USB->outlet adapter for the mains. Similarly, a friend who was on vacation with us had forgotten the charging cable for his iPhone. Thinking I was killing two birds with one stone, I bought an aftermarket USB charging cable for the iPhone which had a separate USB->outlet adapter. His iPhone charged swimmingly, and when I charged my Tab overnight (screen off, starting at ~89% charge) using my cable and the aftermarket adapter, it worked flawlessly. No problem, great solution, or so it seemed...
...until I got home. Suddenly, my Tab wouldn't do more than a trickle charge - the same charge it gets when connected to the USB port on my laptop. (I could tell this was the case because of the small red 'x' next to the charging symbol in the battery icon - which I hadn't noticed while on vacation.) A 2.5-hour car trip using Navigator (screen on the whole time), even with the car charger connected, killed the battery completely. No matter what I did - shutting down apps, rebooting the device, resetting every option I could find - I could not get a fast charge to happen. Even leaving the device plugged in overnight resulted in *less* charge than what I started with if I didn't turn the screen off. I called T-mobile, talked to Samsung tech support twice... and all they could offer was to have me send the Tab back for replacement.
I was at a loss. I nearly did a hard reset in frustration, thinking I had screwed something up royally.
Then I saw the resistors in the pictures in this post:
http://forum.xda-developers.com/showthread.php?t=845844&page=3
and something clicked. I had been assuming that the *cables* were the difference between the iPhone and Tab chargers... but there isn't enough room for resistors in the cables! (Well technically, there is, but regardless...) The resistors must live somewhere else... and, I reasoned, that somewhere must be inside the USB->outlet adapter. So I pulled out the 'proper' Samsung adapter, plugged in the Tab, and voilà... a perfect fast charge.
So this is why the Tab won't charge with an iPod (or Sony-Ericsson, as it turns out) mains USB adapter OR USB-port car charger: the circuitry to let the device know it's capable of a full 2A delivery doesn't live in the Samsung cables; it's only present in the adapter. If that's not there, the device thinks it's connected via USB (and will, in fact, say "USB Connected" every time the charger is plugged in) and won't charge more than a trickle.
So that's my story, and hopefully it can save someone else some pain and frustration. Thanks for giving me the floor.
Click to expand...
Click to collapse
potential solution
found this on youtube, looks like it has great potential:
forum won't let me post url links, but this is the video code in you tube. We're all geeks here (I think) so you know where this goes :
=uPc-ZA3t5aY
hope it helps!

[Q] 5V USB charger controlling my WP7. Is this normal?

I just received my stash of charging gear for my Optimus 7 today, bought from DX. Having read everywhere that USB chargers are 5V +/- 10%, and seeing that the original LG charger outputs 4.8V, I thought my purchase was ok and that this charger would work.
Turns out it doesn't. When I connect the phone to the charger via USB, I lose control of the touchscreen and the system gains a mind of its own. I literally just hold my phone in my hand and stare while it randomly enters hubs and either opens an email message or dials someone. The physical buttons still respond correctly, and it's not until I disconnect the charger from the wall socket or the phone from the USB cable that I can regain control of the phone. My guess is it's a hardware fault and not software.
Granted this unofficial charger cost me around $1, but I got some similar 5V car chargers to go with it, and I've never had problems with other USB chargers.
Unofficial charger specs:
Input: 100-240V 0.15A (0.15A) 50-60hz
Output: 5V 1A
Does someone else have this issue? Is the Optimus 7 an uncommon device for requiring 4.8V input instead of 5V?
Your problem is NOT the charger, as that has nothing to do with the functions of the phone.
Your problem is that your LG Optimus 7 E900 is a DEMO unit, with a DEMO ROM. And until you flash a stock ROM onto your phone, you will experience the demo played out while connected to a power source.
You sure? Because I tried it with the 5V 1A car adapters and no problem, and the original 4.8V 1A charger gives me no problems either.
How do I check my ROM version? Firmware is 1.0.7.10, OS is 7.0.7008.0 after the February update.
Can you get us video on this?
Please excuse the ****ty video quality
That is most fascinating. I recommend you stop using that charger on your phone
So, obviously, you do NOT have the demo ROM as I suspected initially.
Since you say it works with another 5V 1A charger, then I think this specific charger may be sending unexpected, random data signals down the USB cable, resulting in the unresponsive and bizarre behaviour. Since the original charger works well, and charges pretty fast, just stick with that for now.
At least you got the update, here in Canada, we are still waiting for our first update.
And your English is so good, and without any accents...Are you sure you aren't from our here (North America)?
This is true magic Really I have no eplanation on this problem. It is only 0,2V
Yeah, and there I was thinking that the whole point of USB charging is that it's universal and totally compatible, no matter what adapter you buy and what cable you use, provided it connects well.
It seems this is not the case, and I'm weary of trying another third party USB charger, as I still cannot tell if this phenomenon is unique to the Optimus 7 or not. Sadly, the only other MicroUSB phones I have lying around don't actually support charging via this port, just data transfer.
i also admit that im "dazzled" by ur -smart-phone...
probably that adapter is"magical" somehow... did u try it on another phone??
+i also use different chargers but never had any abnormalities so far..
Though i use the original chargers that came with my blackberry 9700 and htc-desire, and just checked the blackberry output is 5v!! i cant read the htc...
So, probably that adapter of yours is a "mutant from another place"...
confirm, htc is also 5v...
ps2- i'm also on 7008, and havent got any issues with charging on both 7004 and 7008
The problem is in the charger, it's too chinese . I had this issue with other touchscreen phones, like SE X8, X10... Just change the charger, obviously it has some hum/noise...
lol...
too chinese? lol
im having the same issue when i use the lg power adapter.. it doesnt always happen but when it happen the touch screen just when berserk.
i always thought that it happens on all units. uh oh
To be honest, I thought you were crazy till I bought a Chinese adapter as well. Don't know the voltage, but I'll check it tomorrow. I think it might have to do with the way the unit is shielded, or not. The only time I wiggs out is when I leave it on the desk, but as soon as I pick it up and pull it a few inches away form the desk or any other object it works fine. But as soon as I put it back down, the screen does the same thing.
I have a usb plug that I plug into the computer that didn't do that at the same desk, I'm going to bring in my other charger and see if it rule out the outlet / interference or just the cheap a$$ adapter....
The only part that worries me, and the only reason I might stop using it, is it takes a bit from the time I unplug it to the time the phone realizes it's unplugged and the charging icon stops. Which doesn't happen with any other charger.
I had this problem too.. until I realized it affected my other touch screen devices too (Galaxy S, Galaxy Tab)... Turns out the 5V charger was the problem. Replaced it with a 5V charger of Philips/Belkin/Samsung/LG and all worked..
The unbranded 5V chargers don't work well with capacitive screens as they seem to be letting off some extra current.

Transformer stuck with "Connect your Charger", charging slowly

Hello.
I m having a problem with my transformer. Right now it is charging slow as if it was connected to the computer and not the wall plug. Also the message "Connect your Charger" won't go out of the screen, even if it is connected or fully charged. I flashed a custom ROM to see if it fixed something, but I had no luck. The cable works fine to connect the transformer o my PC the only thing wrong is that is is not charging properly and the message won't go off. Do you have any idea of what could be happening? My wall charger is model OB-1LF, which I believe is not the one with the known fault. Any ideas?
the adapter is surely broken.
This will sound nuts but, put your wall charger in a plastic baggie [push out all the air and then seal the bag] and put it in your freezer compartment for say 3hrs. Take it out [still in the bag] and let the charger warm up to room temp.
The charger may now work. It is worth a try. You would be trying to be sure the thermal fuse inside the charger is reset. I brought one back to life that way.
hshoem1
the TF uses pin 7 in the USB connector to signal the charger to use the 15v output. If the charger does not see a gnd on pin7 it will only charge at 5V as ypou are seeing. Are you using an extension usb cable? If no then check the pins on the TF and cable for bent or damaged pins. Also try the freezer as the charger may have gone into safety reset.
Thanks for the answers. I will try the bag and freezer to see if it gets fixed.
I know that this freezer trick works (also with broken hard drives too apparently), but what's the physical reasoning behind it? I swear I've seen a good explanation of it before but I can't remember..
Same problem here... Even had the charger replaced but of no use. It does charge wth a different (do it yourself) charger usig the same cable.Maybe that doesn't have the 5v/12v mode or something...
Going to order a new adapter and hope thatll fix it otherwise I'll send the entire transformer for repair i guess :/
I just got one today (got a good price on Amazon)
it just will not charge, tried all the fixes! not too happy as i went for the asus over the ipad and apparently quite a few people have charging issues with it.
charges very slowly through my laptop
From reading posts on forums is sounds like a few people are having it and Asus should of recalled the charger.
phone call to Asus tomorrow
asdfuogh said:
I know that this freezer trick works (also with broken hard drives too apparently), but what's the physical reasoning behind it? I swear I've seen a good explanation of it before but I can't remember..
Click to expand...
Click to collapse
There is overtemp protection circuit that should reset once the charger cools, but apparently it needs to cool down past room temp. The freezer is cold enough to reset it. I would not buy a new TF charger search for devcakes discussion there several aftermarket chargers that work well
Check the cable. I had the same problem. At first I thought it was because of faulty charger and had it returned and got a new one from Asus, but still had the same issue. Then I returned the cable for a new one, it worked flawlessly.
A plus: Asus gave me new cable which was much longer than the original one.
the cable is fine, used it to charge via my laptop
I had the same issue with my charger. I called up Asus and was able to send it in for repair, after a couple days they mailed me a new charger and cable.
Sent from my Transformer TF101 using xda premium
mglancy23 said:
the cable is fine, used it to charge via my laptop
Click to expand...
Click to collapse
Charging with your laptop does not involve pin 7 and supplies 5V. If pin 7 or that conductor is bad or you use an incorrect USB extension cable, the pin 7 signal will not get to the charger and will not supply the 15V charge voltage for normal charge.
Rumbleweed said:
Charging with your laptop does not involve pin 7 and supplies 5V. If pin 7 opr that conductor is bad or you use an incorrect USB extension cable, the pin 7 signal will not get to the charger and will not supply the 15V charge voltage for normal charge.
Click to expand...
Click to collapse
Cheers will send the cable as well to be sure but am pretty confident its the power adapter.
Hopefully i will have an adapter for next week.
I had a brief play on it and i was quite impressed, the stock browser was surprinsignly good and may unistall dolphin.
I tried the freezer trick, but it didn't worked. I ordered another wall charger to see if it works. What's really weird about this is that the Connect your Charger message will not go off the screen. It doesn't matter if it has 100% charge it will still show "Connect your Charger".
In my case my Transformer didn't want to charge at all. The red light never came up while connected, the only way to fix it was to drain my Transformer all the way until shutdown and then plug it in and voila! It started charging again ever dince.
Great tips by the way!
Thanks
Sent from my Atrix 4G using Tapatalk
Just an update, after ordering a new adapter (with cable) it now works... Appearantly the cable was the problem afterall...
New cable with old charger = ok, new cable with new charger = ok, old cable with new charger = no go, old cable with old charger = no go.
And old cable with 3rd party adapter supplying 12V = ok, heh...
New cable is longer indeed, now I just need to think if I wanna go through the RMA process again for the old cable. But yeah, cable was the issue (out of nowhere btw).
dagrim1 said:
Just an update, after ordering a new adapter (with cable) it now works... Appearantly the cable was the problem afterall...
New cable with old charger = ok, new cable with new charger = ok, old cable with new charger = no go, old cable with old charger = no go.
And old cable with 3rd party adapter supplying 12V = ok, heh...
New cable is longer indeed, now I just need to think if I wanna go through the RMA process again for the old cable. But yeah, cable was the issue (out of nowhere btw).
Click to expand...
Click to collapse
The Pin 7 Connection I referenced earlier is bad. This prevents the charger from outputting 15V.
Rumbleweed said:
The Pin 7 Connection I referenced earlier is bad. This prevents the charger from outputting 15V.
Click to expand...
Click to collapse
Yeah, I read your posts about that... couldn't see anything wrong with it on the outside though (with my eye) so unfortunately no clearly bent usb-pins or anything.
Any tips on things I can check? Could easily be on the inside as well of course in which case I can just forget about fixing it. At least it still works with another (non asus) adapter.
Mine was also doing a slow trickle charge. I ended up getting a new charger, but found that the problem was with the cable, not the "wall wart". I can still use my old one with the new cable and works fine as well.

Arrrgh!!! Charging Issues

Had my first issue with charging. It hasn't been on the charger for 24hrs now, finally got down to 28% and decided to charge it up while I take a nap. Went to pull it off the charger and it was down to 17%.
I tried unplugging and plugging in, tried a different wall socket, same issue. Tried my PC, it would connect so I could see the tf101 storage but would not charge, not sure if its supposed to. I tried different 5v wall chargers hoping I would see some kind of a reaction, nothing. I went back to the stock wall charger, plugged everything in and it started to work. I know people have suggested freezing the wall charger, not sure if that's the issue or not since it started to charge. It almost sounds like maybe a sync cable issue bad pin connection. Your thoughts?
sent from my SG2 w/Tapatalk
the common 5v usb wall charger will not charge the asus transformer, needs 11v irc
some earlier transformers had problems with their chargers, I don't know if this still happens. I had to return my first transformer because the charger packed up, That was in August and I have had no problems since.
if it happens again you could try taking off and reseating the bit with the country specific pins, as they have been known to come lose.
two posibilities
the wallwart uses a snap in male country adapter. sometimes the connection is intermittent and it will not charge. plugging in and out moves the contacts and makes it work.
other possibility the charger senses a gnd on pin7 of the USB connector to tell it to output 15v on the positive pin. if it does not see the gnd, it delivers 5v which will charge the TF in about a day if turned off.
Rumbleweed said:
two posibilities
the wallwart uses a snap in male country adapter. sometimes the connection is intermittent and it will not charge. plugging in and out moves the contacts and makes it work.
other possibility the charger senses a gnd on pin7 of the USB connector to tell it to output 15v on the positive pin. if it does not see the gnd, it delivers 5v which will charge the TF in about a day if turned off.
Click to expand...
Click to collapse
I'll check to see if its snapped in properly.
Mine stopped charging and seemed to trip the temp safety sensor inside the charger. I popped it into a freezer bag and stuck it in the freezer for about a half an hour. Once removed from the freezer and bag, it started working again. I haven't had issues since.
sent from my ASUS Transformer running Prime 2.1.1 using Tapatalk
Sharpe351 said:
Mine stopped charging and seemed to trip the temp safety sensor inside the charger. I popped it into a freezer bag and stuck it in the freezer for about a half an hour. Once removed from the freezer and bag, it started working again. I haven't had issues since.
sent from my ASUS Transformer running Prime 2.1.1 using Tapatalk
Click to expand...
Click to collapse
If it happens again ill try that.
Sent from my Transformer TF101 using Tapatalk
How come sometimes I am using my transformer tf101 while it's being charged, instead of charging the battery gets used up???
On the TF try blowing hard on the connection port. Dust has been known to stop charging.
Assdikes said:
How come sometimes I am using my transformer tf101 while it's being charged, instead of charging the battery gets used up???
Click to expand...
Click to collapse
What you are actually doing is using your TF while it is plugged in. It is not charging. The battery discharges because it is not charging.
Could be one of several reasons Most likely three are ( in no particular order)
1. Over temp protection in wall wart has tripped ( unplug and stick in freezer for 20 mins
2. The male country adapter ( power prongs) is not making a good connection where it connects to the charger. Wiggle or unsnap and reinstall
3. Pin 7 on USB is not seeing a GND signal from TF causing powersupply to supply %v only instead of 15V. Clean /inspect connector on TF and corresponding plug. This will also occur if you use a USB extension cable that does not have all the connections for USB 3.0

Categories

Resources