Hi, I've been on a volunteer project for 3 weeks and before that I had been keeping my phone stock (I was waiting for something I really liked to come out) I've unlocked my boot loader before but I flashed back to .83 and I got into the Moto beta program so I updated officially to the new .91
The problem is: I've been out of this for so long I literally have no clue how to install Alien (Build 4)
Can someone point me to the tutorials I need to follow (In order) to install Alien?\
I also think this could be useful for new Atrix users etc
Seriously?
Open your eyes and read! Or leave it...
OK, re-flash pudding like you were unlocking your bootloader again,
http://forum.xda-developers.com/showthread.php?t=1136261
then install cmw using fastboot
http://forum.xda-developers.com/showthread.php?t=1204500
then install alien.
If you need more help then that, I would spend some time catching up, if you unlocked your bootloader before, not that much has changed since then.
TinyRK said:
Seriously?
Open your eyes and read! Or leave it...
Click to expand...
Click to collapse
You have nothing to contribute, and therefore nothing to say. Please act accordingly.
To the OP: CM7 has come out in a pre-beta form since you've been gone. I would try that and Alien both. See which one you like better...
roharia said:
Hi, I've been on a volunteer project for 3 weeks and before that I had been keeping my phone stock (I was waiting for something I really liked to come out) I've unlocked my boot loader before but I flashed back to .83 and I got into the Moto beta program so I updated officially to the new .91
The problem is: I've been out of this for so long I literally have no clue how to install Alien (Build 4)
Can someone point me to the tutorials I need to follow (In order) to install Alien?\
I also think this could be useful for new Atrix users etc
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thread closed
Related
OK, I'm trying to unlock a Vibrant for someone else. I have read and tried several methods with no success yet.
I had Axura 2.2 and tired the SGSUnlock with no luck
I ODIN'd back to stock20100512.pit / t959UVJFD.tar and SGSUnlock still doesn't work. Ive tried two variants of it, nothing.
I have limited experience with ADB (driver issues between multiple devices so I use ADBWireless) and was able to get an nv_data.bak and used a hex gen to get this (screenshot).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
According to notes, I'm to find the code separated by periods, but I have no periods. Anyone have an idea or can lead me to a quick fix?
Remaining questions, once I generate a code, will the code I use at stock 2.1 work once I flash 2.2 back on?
Thanks for any help or guidance, much appreciated!
anyone? Bump?
You're out of luck as far as SGS Unlock goes. Any ROM update JI6 or later corrupts the code in the nv_data.bin file. There is this method thanks to helroz that has worked though.
http://forum.xda-developers.com/showthread.php?t=822008&page=4
thanks for that... Seems like work Will an unlock code from TMO still work outright?
it2steve said:
thanks for that... Seems like work Will an unlock code from TMO still work outright?
Click to expand...
Click to collapse
If you use this method I don't think so since it changes the actual code. You could always call TMO and get the code instead of doing it this way as well. Think it usually takes a few days.
If you need a unlock. Hit me up. No matter the rom. no matter the lock.
Same here. I need to unlock a vibrant I just got.
djidea said:
Same here. I need to unlock a vibrant I just got.
Click to expand...
Click to collapse
If you just got it then you are still on 2.1? Just search the market for "SGS Unlock", that'll do it.
Hi,
I want to install Android on my HTC Touch pro. Now I've done a bit of research but I still ain't sure.
I Live in Malta, and bought an unlocked phone from the UK (eBay). I downloaded the XDAndroid thing from the XDAndroid Wiki but I don't know which is my exact model. I went with the RAPH800, and when I ran it, it seemed to get stuck on the booting. it said something about a bug :S I only could pull off the battery, as nothing else would work.
So, Im back to step one.
1. Which exactly is my phone model?
2. If it was the RAPH800, does it normally get stuck on 'bug KENDEL' something like that
3. How long does the booting take overall?
major props to any1 who helps me
EDIT: I also wanna do the Dual-Boot thing using using GenY-DualBOOT (got it from this website). Any1 can help me doing that, and if its worth it or no
Thanks guys.
P.S. I'm a noob, so I need very detailed instructions
OK, I have a new problem. i downloaded another installer, and it didn't crash. (There was a default SETUP.txt file so I used that. I'm getting to the XDAndroid screen, but then some grainy aindroid toolbar comes, my phone vibrates, and stops there :S
Any ideas (pics to follow soon)
Pics are huge, like 2MB each, and it doesnt let me post from tinypic before 7 posts -.- Hopefully you know what I mean
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see, 3rd and 4th is where the problem arises. The other 2 are just there so you see what comes in the meantime.
(huge pics are huge)
Last BUMP. If I don't get helped, I'll just give up
look
View attachment 582719look
This might not be the right section to post this in. I would suggest going to the android development section for your specific phone.
Since Sprint decided to pull the plug on WiMAX, I had to get rid of my trusty Evo 4G for a S4. Rooted with Odin, but followed an ancient guide on youtube to get tether unlocked without reading the comments. Now I'm stuck at a yellow "Sprint Spark" screen. Tried a hard reset (a few times), no change.
I think I need to flash a stock rom, but I have no clue which one I should use (and am fearing breaking more stuff). At this point, I just want to get the phone usable .. probably as stock as possible for now. The phone is brand new, assuming 4.4.2? Not sure if there's a way to check exactly what it was running. Recovery says KOT49H.L720VPUFNAE
Any advice, is much appreciated
tagged said:
Since Sprint decided to pull the plug on WiMAX, I had to get rid of my trusty Evo 4G for a S4. Rooted with Odin, but followed an ancient guide on youtube to get tether unlocked without reading the comments. Now I'm stuck at a yellow "Sprint Spark" screen. Tried a hard reset (a few times), no change.
I think I need to flash a stock rom, but I have no clue which one I should use (and am fearing breaking more stuff). At this point, I just want to get the phone usable .. probably as stock as possible for now. The phone is brand new, assuming 4.4.2? Not sure if there's a way to check exactly what it was running. Recovery says KOT49H.L720VPUFNAE
Any advice, is much appreciated
Click to expand...
Click to collapse
I'm pretty sure everything you need is in this thread-http://forum.xda-developers.com/showthread.php?t=2621862
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
I'm pretty sure everything you need is in this thread-http://forum.xda-developers.com/showthread.php?t=2621862
Click to expand...
Click to collapse
Maybe, but 250 pages is a lot to sort through (no offense). Does a stock rom (no root) even exist?
tagged said:
Maybe, but 250 pages is a lot to sort through (no offense). Does a stock rom (no root) even exist?
Click to expand...
Click to collapse
Try looking at the first post[emoji6]
Lol
Hello,
I have a Sprint Galaxy S4 (but you knew that.) that is currently running 4.4.2 Android. I have rooted my phone, but I never installed any roms, I am still using the stock touchwiz. For a while now, my phone has been telling me "system update downloaded" and wants me to install it.
Basically: How do I go about updating my phone without breaking something due to my root status. Should I un-root? Should I just hit update? I'm skeptical because I don't know much about fixing my phone if I accidentally brick it.
Alternatively, would I be better just getting a rom, like Cyanogen? I don't hate touchwiz as much as I probably should, haha.
Side note, I apologize if this has been raised before, I have been searching for answers to this since the first time my phone notified me of the update, between Google searches and searching this forum, I haven't found a topic that addresses my issue.
Akalron said:
Hello,
I have a Sprint Galaxy S4 (but you knew that.) that is currently running 4.4.2 Android. I have rooted my phone, but I never installed any roms, I am still using the stock touchwiz. For a while now, my phone has been telling me "system update downloaded" and wants me to install it.
Basically: How do I go about updating my phone without breaking something due to my root status. Should I un-root? Should I just hit update? I'm skeptical because I don't know much about fixing my phone if I accidentally brick it.
Alternatively, would I be better just getting a rom, like Cyanogen? I don't hate touchwiz as much as I probably should, haha.
Side note, I apologize if this has been raised before, I have been searching for answers to this since the first time my phone notified me of the update, between Google searches and searching this forum, I haven't found a topic that addresses my issue.
Click to expand...
Click to collapse
You coins just try a custom Touchwiz ROM like mine (Wicked X). You can't install the OTA on a rooted system, you need to unroot to take the OTA.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey all,
I am running one of JKRuze's ROMS and have been for over a year. It's basically a slightly modified, non-rooted version of Android 7.0. My spotify has quit working, and one of the final questions their support team asked me is if I am running a modified OS on my phone. ****. So, I need to go back to stock. I tried following a method on here, but it failed to Odin. Anyone know if there is a thread around here with best method to get back to stock?
ODIN is the only method i know,never failed for me. try downloading files again( personally using U firmware)
Where can I get the latest U firmware? I have not been able to find a reliable link.
musiclover7 said:
Where can I get the latest U firmware? I have not been able to find a reliable link.
Click to expand...
Click to collapse
https://updato.com/firmware-archive-select-model?record=D561F95A4A7611E89F15FA163EE8F90B
Yeah, I went to that link from another post last night, and for the life of me, could not figure out how to download. I hate when sites do that. Hide the download link in some obscure location with a bunch of other buttons with the word download in big letters that just lead you to some other bogus garbage...
musiclover7 said:
Yeah, I went to that link from another post last night, and for the life of me, could not figure out how to download. I hate when sites do that. Hide the download link in some obscure location with a bunch of other buttons with the word download in big letters that just lead you to some other bogus garbage...
Click to expand...
Click to collapse
Try using an adblocker. Anyway it's in the top right, here's a screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks.. That link says it is for SM-G935U. I've got the SM-G935V, will it still work?
Please help. I thought I had installed stock, but now my phone will not connect to cellular data. Data link seems fine.
Update... Never mind, I believe I have it figured out. I did not add the BL, CP, and CSC slots via odin.