Related
Hi guys,
I have read this post:
http://forum.xda-developers.com/showthread.php?t=1021837
I am using a HTC HD2 (international version)
I would like to know if it's possible to do the following?
- boot MIUI (http://www.miui.com/download.html) from SD card
From what I have read about MAGLDR, it seemed that I can copy MIUI to SD, and select option 2 in MAGLDR...........
Quoted:
Option #2
Boot AD SD, this will in the future allow you to boot Android from your SD card, but as for now it is not working just yet. This option also allows you to boot other Android specific software such as Clock Work Mod Recovery(CWM) that you have placed specific files for on your SD card. This option is not really needed for CWM as you no longer have to place files for it on your SD card you can flash it straight to NAND.
But it seemed that I need to burn MAGLDR into my phone, which I am afraid of bricking it............
Could someone let me know if I have the whole concept wrong?
Is it possible to run Haret after booting into Win6.5 to run MIUI (http://www.miui.com/download.html) from SD?
i think these tutorials answered by questions............but still a bit afraid to brick my phone..........
http://www.addictivetips.com/mobile/what-is-magldr-and-how-to-install-and-use-it-on-htc-hd2/
http://www.addictivetips.com/mobile/how-to-boot-android-from-sd-card-of-htc-hd2-with-magldr/
You can boot Miui in Winmo via SD. (using haret)
http://forum.xda-developers.com/showthread.php?t=969661
If you follow the instructions, you probably won't brick your phone by installing magldr.
I didn't want to use MIUI in SD format as no1 is doing it now:
Quoted:
SORRY I will stop to release any MIUI mods , including SD/MAGLDR version, owing to some unhappy things, check here:http://www.miui.com/thread-59240-1-1.html
Eelkede said:
If you follow the instructions, you probably won't brick your phone by installing magldr.
Click to expand...
Click to collapse
Managed to install magldr and CMW~~ and trying to "install"/"flash" MIUI files and trying to boot up and stuck at green HTC for 30 mins...........
Any ideas?
Wrong CWM partition file, Check the thread for info on how big the CWM partition has to be.
Eelkede said:
Wrong CWM partition file, Check the thread for info on how big the CWM partition has to be.
Click to expand...
Click to collapse
Sorry, noob question............
check which thread?..............
I've burnt the 400MB version...............
The thread of the rom you are trying to install.
Oh! Okay, I thought making it a bigger size will allow it to have more access to disk space for it's OS + programs, okay, I'll look into this area
How bigger the CWM partition, the bigger the OS space, which you can't use for apps.
But I can choose to install apps in SD card?
A closer look @ http://forum.xda-developers.com/showthread.php?p=11894125#post11894125
and I figured that it's running MIUI from SD which is not what I wanted?
I want it to flash into my NAND...............
That one is running from NAND. Follow his tutorial to get it running.
hmmmmmmm, okay.........let me try it again...........
Was doing the CMW thingy,
It failed with:
USB Init Failed...........
The thing is I have 1.3 of CMW, and the tutorial wants me to flash a v1.2 of CMW
http://forum.xda-developers.com/showthread.php?t=898913
Eelkede, from his post (http://forum.xda-developers.com/showthread.php?p=11894125#post11894125)
can you tell which size of CMW should I flash?
I might go here to reflash the correct size (v1.3 instead of v1.2)
(http://forum.xda-developers.com/showthread.php?t=898913)
btw, I used this to help me flash..............
http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
150 mb is enough (you can edit it to a lower number, but let's just start normal)
Follow the Instructions you posted.
Put the .zip of the ROM on your sd card
Reboot phone, open the CWM (AD Recovery).
Select: Install Zip from sd card, find the .zip, install. Let it boot (it can take a while, just leave it).
Optional: Install (same way as rom) Language pack, reboot.
Done.
Oh! I used http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
and flashed to 250MB and it's working now!
One thing I noticed; I was using Win6.5 + loading MIUI from SD using Harret, and this is faster than the one I had loaded in NAND..........
You mean it loads faster? or does it handles faster (in android)?
Could be, always reboot a few times before making a final judgement. You can try overclocking your device.
Glad I could help, have fun with MIUI on your device!
I have been delaying opening a new thread - I thought I could get it fixed on my own, but I haven't been able to find anything that works ... I've found lots of things that look like they should have worked, but then after days and days of experimenting I'm still left with my expensive brick.
It's been over a month now since it was originally out of commission and BN has refused any help or replacement ... big surprise. Since it's been a while, I can't remember exactly what happened, but this should be pretty close:
Took it out of the box --> registered it with BN --> read up and decided to put the CM7 stable release on it. Had CM7 120 I think, plus Google apps, plus overclocking froyo 022311. Was working great but kept prompting me to update to the next stable release (the RC1). I decided to make a backup and apply the update. Pretty much went dark during the upgrade and I haven't been able to do anything with it.
The screen won't even flicker, let alone backlight, or CWM menu regardless of which combinations of buttons, sequence, etc.
From what I can tell from the forums, I have a corrupt boot partition.
Here are some of what I have tried: (I've tried these on both Windows and Mac)
1) made a new CWM SD image and tried to boot to that - still the same thing ... nothing. I've tried making several different versions, the latest being 3.0.2.8.
2) tried to use ADB to talk to it and dd new boot.img and system.img files that I found in a forum thread.
- Although I can get ADB to talk to the nook (see it, and execute reboot commands, etc.) I can't get into the adb shell. It complains about a missing file when that command is run.
Some other threads I tried: (that I can remember)
http://forum.xda-developers.com/showthread.php?p=17208775
http://forum.xda-developers.com/showthread.php?t=914690
http://forum.xda-developers.com/showpost.php?p=17208775&postcount=264
http://forum.xda-developers.com/showthread.php?t=949699
It seems like I'm stuck because the recommendations I see for fixing the boot partition, or the ADB shell problem are to create a new bootable SD card and flash from various zip files once the CWM menu is there. This isn't working because I cannot get the nook to boot to CWM from the SD...If I could get it to boot to the SD, I would be home free!
I can tell the thing is alive and trying to boot because when I've got it plugged into my PC, I can see it get added to Device Manager (as an Android + the two BN disk drives), and I can hear the plug-n-play picking up the changes when the power button is held down. If I plug it in after inserting the bootable SD card, I can see it trying, but it fails to load the driver.
Do you guys have any recommendations? I feel like I'm close, but can't get there. There's no way I'm the .01 % of people who can brick a nook ... is there?
Thanks!
I had a similiar problem with booting off an sdcard. It just wouldn't no matter what I tried. Then I burned a new bootable cwm card but used the mounted sdcard from my nook instead of the sdcard adapter plugged into my PC. This worked finally. What this tells me is some sdcard adapters don't work well with burning bootable sdcards. Give this technique a shot and then restore the nook to factory stock using a cwm restore-to-stock file. Then update to BN v1.3 and start over with your CM7 tinkering. ( check the Dev section for the restore to 1.2 stock update.)
Edit - what I meant to say but didn't clairify is try different adapters if the nook won't mount the sdcard when plugged into the PC. Also...try uninstalling the adb drivers and try getting the nook to show the sdcard mounted in your PC.
Sent from my NookColor using XDA Premium App
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
Populating /dev using udev: done
Initializing random number generator....done
modprobe: chdir (2.6.32.9): No such file or directory
Starting network...
Detected Standard B&N nook layout, emmc first
It appears the SD card is already properly formatted
Skipping format
Mounting /dev/mmcblk1p1 as /boot
Looking for the install images....
Initial Install files not found
Please download it from nook.linuxhacker.ru
and put on first partition of this SD card
the name should start with updatei-cm and end with .zip
Click to expand...
Click to collapse
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
First of all, have you done a nandroid backup in CWM? If so you can definitely recover.
Second it looks like your boot file is corrupted, always sending you to recover rather than a normal boot. What boot setup are you using?
echoedge said:
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
Click to expand...
Click to collapse
You have installed your ROM to SD. There is no CWM recovery on SD installs. You cannot do a nandroid backup with the SD recovery.
See my post here for an explanation of the difference between emmc installs and SD installs:
http://forum.xda-developers.com/showthread.php?p=25354258
However, there is a way to back it up. Keep reading further down in my post.
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
echoedge said:
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
Click to expand...
Click to collapse
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
leapinlar said:
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
Click to expand...
Click to collapse
Hmm.. somehow I got it doing that. I of course tried that before and only the two partitions were loading. This time I was messing with it and clicking the multi sd mount widget and somehow the boot drive came up and I transferred the files on there.
So now I can do a nandroid backup as usual? Or sense it's an (Alt) instead of a recovery thing must it be different?
I'll try some things in the mean time..
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
edit: Yeah, the Alt files didn't work.. I reset and pressed the N button, went to alternate and SD card. Nothing.
Reset it and it works as usual, but still no ability to backup..
echoedge said:
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
Click to expand...
Click to collapse
Do not use ROM Manager with the verygreen SD installation. It does not work. Use the boot menu to boot into the alternate. Hold the n key while booting. Choose sd, alt.
Edit: you said two partitions showed up. Did you physically take the card out and insert into a card reader in your PC? It should see just one drive. Make sure those two files are there or it will hang when you choose it in the boot menu. I suspect you put the files on emmc boot since you used that strange program to do it.
Sent from my Nook Color running ICS and Tapatalk
No,
it's something with the multi mount sd app widget.
I hook mini usb to usb.
then hit the widget.
and JUST the boot partition comes up.
It says something about disk F: is not formatted correctly as well.
Just plugging it in without the multi mount app the outward sd card partition and the nook color come up, just those two.
And can't believe I didn't think to take the mini SD out and use an adapter. I'll try it again with that.
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
echoedge said:
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
Click to expand...
Click to collapse
There are many threads here that will tell you how to restore stock to emmc. Search for them.
But to get the SD working, do what I said. And I would suggest getting rid of that mount program so you don't mess it up again.
Edit: The problem with those mount programs is, if you mount the wrong partition, windows can only read fat partitions and will ask you to format. System and data are ext4 which windows cannot read.
Sent from my Nook Color running ICS and Tapatalk
Thanks a bunch.
In ubuntu once the sd card is inserted all 4 partititions automatically came up so I was able to copy and paste the Alt images.
Am backing up right now
And yeah getting the emmc back to stop np.
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
also, i assume all in eed to do to make a back-up on my hard drive or usb (so its not just inclusive to the minisd), i can just root browser into mnt/sdcard/clockworkmod/backup and and create a zip of the 2012.5.5.etc.etc.etc. made folder and trnasfer it onto external device? If needed all I would need to do is a transfer back?
echoedge said:
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
Click to expand...
Click to collapse
Yes you can update the ROM. Just not with CWM. You place the update-...zip in the boot partition of the SD and then using the boot menu (hold n during boot) select SD and recovery. The script in the boot partition will install the ROM for you. You need to read the first post in the agnostic image thread. It tells you all this.
On the second question, you can do it that way, but the files are already compressed there so just copy the folder to your PC to archive them.
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
echoedge said:
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
Click to expand...
Click to collapse
Yes. I didn't know you could do it that way. See, you taught me something. LOL. As long as you are getting into the 3.0.2.8 CWM recovery it's OK.
Sent from my NookColor using Tapatalk
I've tried to do a search for this but can't find it. I'm such a complete novice I may have run across it and not even known I did. I tried to make a bootable SD to be able to use the google app store. I've seen so many instructions now I don't even know where the first one I used is. I think I used CM7 (my Nook Color is version 1.4.1...don't know if that matters). So far, nothing I've done has added the shopping cart but first things first.
Evidently I must have really screwed things up because the cyanogenmod is now on my nook instead of the SD card (which explains why I had so many problems when I tried to redo it). The first thread I found doing a google search was this one: http://forum.xda-developers.com/showthread.php?t=931720&highlight=restore+to+stock.
After reading through it on the last page someone posted that it was a very old thread and to go here: http://forum.xda-developers.com/showthread.php?p=25354258#post25354258 and go down to 15A. But, having the technical skills of a pencil eraser, I can't even figure out which software to download, let alone how to accomplish the restoration. I actually managed to jailbreak my iphone but that was just a matter of downloading software and running it. This doesn't appear to be as simple.
I did manage to find all the files required by the first thread to do the restore, but then I got to this: Select "Restore virtual hard disk image" from the "Disk" menu. My winimage doesn't say that. I am using a new SD card so perhaps that's why. It's at that point that I read all the way through the thread to discover that method? or the firmware? was obsolete.
All I really want is to know which file(s) to download and, if possible, a link to instructions a 5 year old could follow. If I knew a 6th grader I'd just ask them because I'm pretty sure this is hard wired into their DNA. I'm 53 so that's probably half my problem. I can usually figure these things out but this has me completely stumped.
Thanks so much for your time.
You probably used ROM Manager and told it to install CWM and update to a new ROM. The problem is, ROM Manager only works on internal memory installations, not SD installations, so it installed CM to internal memory.
Don't use that old thread to flash stock back on to internal memory, even if you did find the files.
And age is not an excuse for not learning, I'm 68.
Go to my thread referenced above and download the stock 1.4.3 zip file from A15. It is linked in the text of A15.
Make a bootable CWM SD. Use that to flash the stock ROM. Download the file CWM-6.0.1.2-bootable_SD.zip and extract it somewhere on your PC. You should end up with approximately a 300MB .img file. Burn that image to your SD using Win32diskimager per the directions quoted here:
To use Win32DiskImager, find it on the web (here, it's free) and install it on your Windows PC. Open it (be sure to run it as administrator) and select the drive (device) that has your card reader with your SD inserted. Then in the image file box put the location where you have the extracted img file. Then when everything is set right, click on the write button. A warning will pop up asking if you want to proceed. When you have verified that you are going to write to the correct device, click on Yes. (One user overwrote their external USB hard drive by not verifying first). If you get an error message about access denied, it means you are looking at the drive with Windows Explorer. Close Windows Explorer and try again. In fact, it is a good idea to close all unnecessary windows when burning, even your browser.
Click to expand...
Click to collapse
Once the SD is burned, temporarily remove the SD from the PC and then reinsert in your PC. Then copy the Stock zip you downloaded earlier to the SD. Insert the SD into your Nook and boot. Once CWM appears, use the volume up/down keys to move the cursor and highlight "Install zip from SD". Then use the n key to activate it. Select the zip you copied to the SD. Go ahead and flash it.
When it is complete, take the SD out and boot. It should boot to stock.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You probably used ROM Manager and told it to install CWM and update to a new ROM. The problem is, ROM Manager only works on internal memory installations, not SD installations.
Don't use that old thread to flash stock back on to internal memory, even if you did find the files.
And age is not an excuse for not learning, I'm 68.
Go to my thread referenced above and download the zip file from A15. It is linked in the text of A15.
Make a bootable CWM SD. Use that to flash the stock ROM. Download the file CWM-5.5.0.4-bootable_SD.zip and extract it somewhere on your PC. You should end up with approximately a 200MB .img file. Burn that image to your SD using Win32diskimager per the directions quoted here:
Once the SD is burned, temporarily remove the SD from the PC and then reinsert in your PC. Then copy the Stock zip you downloaded earlier to the SD. Insert the SD into your Nook and boot. Once CWM appears, use the volume up/down keys to move the cursor and highlight "Install zip from SD". Then use the n key to activate it. Select the zip you copied to the SD. Go ahead and flash it.
When it is complete, take the SD out and boot. It should boot to stock.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thank you, I'll try again! It's not that I don't want to learn. I'm asking because I trying to learn. I think I've probably confused myself by reading too much on too many websites and it takes me a little while to figure out technical things. I do appreciate the help. I probably just need to take some deep breaths and clear my brain so I can start over. I just want to make sure I don't really mess it up to the point it's completely unrepairable.
DelilahM said:
Thank you, I'll try again! It's not that I don't want to learn. I'm asking because I trying to learn. I think I've probably confused myself by reading too much on too many websites and it takes me a little while to figure out technical things. I do appreciate the help. I probably just need to take some deep breaths and clear my brain so I can start over. I just want to make sure I don't really mess it up to the point it's completely unrepairable.
Click to expand...
Click to collapse
Notice I changed which CWM you should download. Use 6.0.1.2, it works better for stock.
leapinlar said:
Notice I changed which CWM you should download. Use 6.0.1.2, it works better for stock.
Click to expand...
Click to collapse
Oh, thank you, thank you, thank you!!! It works perfectly!
Sorry to be a bother, I don't know whether this is related. Everything loaded perfectly and it looks just as it did when I first turned it on but now every time I try to use the keyboard, it pops up for probably less than a second and then goes back down. I've tried to "catch" it to see if I could get a letter/digit each time to try and put in but it just goes up and down, up and down. I tried doing the set up with the boot disk in because I know nook reads the sd card first but that didn't help.
However, the version I originally had on the nook color was 1.4.1. Would it make a difference if I used the 1.4.3 instead?
Thanks
DelilahM said:
Sorry to be a bother, I don't know whether this is related. Everything loaded perfectly and it looks just as it did when I first turned it on but now every time I try to use the keyboard, it pops up for probably less than a second and then goes back down. I've tried to "catch" it to see if I could get a letter/digit each time to try and put in but it just goes up and down, up and down. I tried doing the set up with the boot disk in because I know nook reads the sd card first but that didn't help.
However, the version I originally had on the nook color was 1.4.1. Would it make a difference if I used the 1.4.3 instead?
Thanks
Click to expand...
Click to collapse
Did you follow the instructions in the thread where you were supposed to flash a format zip? I forgot to add that in the above instructions. It is not to late to do it. Boot to CWM and flash the format zip and boot back to stock and re-register again. That may be the cause of the keyboard problem.
And being 1.4.3 should make no difference.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Did you follow the instructions in the thread where you were supposed to flash a format zip? I forgot to add that in the above instructions. It is not to late to do it. Boot to CWM and flash the format zip and boot back to stock and re-register again. That may be the cause of the keyboard problem.
And being 1.4.3 should make no difference.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Yes. Installed that as well. However, I did notice when I put the sd card in my computer a few times windows said "disk might be corrupt do you want to continue?" So that might be the problem. I'll go into town tomorrow and get a new one to see if that makes a difference.
Well, I got a new SD card and it's still doing the same thing, the keyboard just goes up and down, up and down so I don't know what to do now.
Cindie
fix it?
Did you ever get it fixed? I did (probably) the exact same thing as you did (installed flashable ROM in eMMC), and it took me hours to get it straightened out
Although I can't say for sure... since I wasn't really taking notes with what I was trying... I think what eventually got me going was using a different bootable (step 1), b/c my microsd card was an off brand (lexar 8gb).
What I did was...
1) made bootable SD card with [generic-sdcard-v1.3-CM7-9-10-larger-Rev5.zip] rather than "so&so size gb card CWR.img"
2) added [nookcolor_1_4_3_signed.zip]
Before I got it to work properly, I had various types of failures-
stuck at "n" screen,
wifi wouldnt work (so I didnt get past nook first start-up process),
appeared to work ok but screen would flash all the time (your keyboard problem)
Eventually I got it sorted, and through all this trial and error, was able to properly put CM10 on sd card whilst leaving nook "original". Lol.
*I'm a newbie at this stuff so please make corrections if I jacked my post up! This was a few days ago and I'm at work... so I can't reference my home 'puter
[Caveat emptor: adopt/follow this guide at your own risk].
FWIW, here the process I used to install CM11 internally (on emmc*) on my HD+:
Using a disk partition tool (such as MiniTool Partition Wizard Home Edition) create on SD card a Primary FAT32 partition, and set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag. Once this is done, the partition should appear as a (read/write accessible) drive under Windows.
Use an archive file manager such as 7-zip and extract the .img file from verygreen’s emmc-cwm-early3.1.img.gz (http://forum.xda-developers.com/showpost.php?p=49192422&postcount=1)
Use the archive file manager to extract the files from the .img file and copy them to the SD card: first MLO, then next u-boot.bin, uImage, kernel, ramdisk.cwm.
Copy to the SD card:
verygreen’s flashable CWM recovery zip file cwm-recovery-ovation-6.zip (http://forum.xda-developers.com/showpost.php?p=49192422&postcount=1)
the zip file of CM11 ROM build of your choice – e.g., from http://download.cyanogenmod.org/?device=ovation (see http://www.cyanogenmod.org/blog/cm-11-m4-post-release-items for considerations in choosing nightlies vs. snapshot/stable builds)
the zip file of the Gapps package corresponding to CM11 – e.g., http://opengapps.org/?api=4.4&variant=nano
Put the SD card into the HD+, and boot from its power-off state.
[Optional step but highly recommended] Select Backup to backup your HD+ current ROM config (/boot, /recovery, /system, and /data).
Select Wipe data & factory reset.
Select install zip from SD card and install flashable CWM recovery zip file.
Select install zip from SD card and install CM11 zip file.
Select install zip from SD card and install Gapps zip file.
Remove SD card and select reboot.
Once the HD+ boots up, set up the wifi connectivity and your google account info.
If the Nook fails to boot off SD -- the two most common symptoms of failed SD boot and their likely causes are:
The HD+ boots straight to stock -- most likely the boot partition's type and/or flag are not correctly set, or the HD+ cannot find the MLO in the boot partition (make sure that MLO is the very first file to be copied to the freshly made /boot partition).
If the HD+ consistently boots straight to stock in spite of a valid /boot partition and boot files, it's possible that the tablet is one of those HD+ units that have difficulty booting of SD cards, see http://forum.xda-developers.com/showthread.php?t=2288688 for more info and potential remedies.
The HD+ screen stays dark for seemingly a long time then eventually boots to stock -- most likely the MLO or u-boot.bin are corrupted. When in doubt, compare the size of the two copies of the files in bytes.
HOW-TO Guides for Installing CyanogenMod on Nook HD+
Installing CM11 Internally on Nook HD+ (this guide)
Building a CM11 SD card with Customized Partition Sizing for HD+
Updating HD+ Internal EMMC to CM11 from CM10.x
What to download?
Hey Guys,
First off I really appreciate the time you take to answer my questions.
I still need some guidance however.
Again I have "Android 2.2" The last stock upgrade they updated.
So with that being said. What files should I download, and what order.
Everyone is giving me different links and i am not sure what to do.
This is my first time every doing something like this on a nook or tablet.
So please be patient with me. I would greatly appreciate it.
Should I download the cyanogenmod software first to my nook folder on my computer desktop, and then what other files do I need?
Once I download them I plan to transfer them over to a card for my usb slot that is on the bottom of my nook I am assuming, correct?
Once I have the software I need, Then I need to know what order should I install what first.
When I am doing this software installs. Do I need to worry about what is on there now.
This is nothing I need to save so I am not afraid of loosing what ever is on the nook at the moment.
All of this stuff can be let go or deleted or refresh install. Don't care.
I just want to get my table to work like a computer basically. So, I can watch the videos that i want to watch on my tablet, and still
be able to surf the net and read internet websites, you tube .com and other websites I like of course.
By doing this process this will still allow me to do this I am assuming. Again, I have never mode so I am not sure what this
cyanogenmod is or what it can do to help. I am game for trying to do it if it gets me what I want it to do.
I did see the other links posted above. I just diidn't know where to start or what to download first do to the fact I have only 2.2 android software on my nook color hd+
Again, I appreciate the advice peeps!
Please elaborate if you can with what links and what to do. Thanks again. Karl
kjames1973 said:
Hey Guys,
First off I really appreciate the time you take to answer my questions.
I still need some guidance however.
Please elaborate if you can with what links and what to do. Thanks again. Karl
Click to expand...
Click to collapse
First of all, you need to realize that installing any kind of aftermarket ROM on your android device will void your warranty with no manufacturer support.
Second, installing ROMs is inherently risky, since there is always the possibility of bricking your device.
Thirdly, any kind of ROMs that you see in the Android Development section are not completely stable; they are usable but there will be bugs & glitches. So all ROMs come with a caveat: use at your own risk!
That being said, here's how it works:
You will need three files; (a) SD Card Image (b) Recovery Image (c) ROM that you want to install.
For this purpose I am using CM11 as the example, the thread is here.
[1] Every Android device has a manufacturer installed recovery program; to install a custom ROM you need to have a custom recovery. This custom recovery is what allows you to make changes to your Android device.
[2] The Nook HD+ has the advantage of being able to boot from its SD card slot (kinda like a computer booting from a CD/DVD drive).
[3] Download the image files and create a bootable SD card. Copy the Recovery Image and the ROM to this SD card. You will need WinImage to create this card in a Windows computer.
[4] Insert this card into the HD+ and reboot your device. Here's the kicker, the HD+ may not boot from the SD card and may simply go to normal boot. If that happens you will have to keep repeating it. Check older threads about this issue.
[5] Once it boots from the SD Card, follow the instructions listed in the first post of that thread.
Brief summary (this is true for most devices): Create a bootable SD card, use this card to boot the device, install Custom recovery into the device, then install the ROM. Once you have a custom recovery installed, you won't ever have to use the bootable card again unless you run into some issues.
Good Luck!
For Hirent.
Hirent,
First off, I want to say thank you so much for the very detailed reply you sent my way.
I will use this with digression of course. I am aware of the warranty issues that it will cause.
The one major question I have before I dive into this project.
I am aware of the possible bugs and how it is not perfected.
Will this enable me to download and install flash player on a updated android that was suggested in this article you posted?
Or will it just work automatically after I do the project of these software installs. Another words I will be able to open chrome or factory
browser and go to NHL.com, MLB.com, NBA.com and other s and play the videos on the Nook HD+ Color after installs or no?
Thanks for the advice, help, and replies.
Karl
kjames1973 said:
...
The one major question I have before I dive into this project.
I am aware of the possible bugs and how it is not perfected.
Will this enable me to download and install flash player on a updated android that was suggested in this article you posted?
Or will it just work automatically after I do the project of these software installs. Another words I will be able to open chrome or factory
browser and go to NHL.com, MLB.com, NBA.com and other s and play the videos on the Nook HD+ Color after installs or no?
...
Click to expand...
Click to collapse
FWIW, I am running CM11 (M11 snapshot build: http://download.cyanogenmod.org/?device=ovation&type=snapshot) on my HD+, and Flash works reasonably well on the Chrome browser.
New Issue with SD Card 8gb, Centon
Hello,
I tried to follow the instructions on deleting partition on SD card. I also did get it wipe. But, the new issue is I am not able to go any further in the process.
I tried to read the card in my computer and now the card is not being recognized by windows on "my computer" It is H Drive.
IT was now its not. I deleted partition then was going to try to create the new partition. That was not highlighted on the partition magic software.
The article I was following was this.
https://www.youtube.com/watch?v=fLbr1Uyr0sk
Now my SD card is not being recognize by windows 7 ultimate.
I also tried to do the right click trick on my computer then computer management. Then did click storage and then drive then so on.
However when I did that, only that screen recognizes my sd card before and after. But no other screens like my computer screen.
What do I do next with this card to continue. I was trying to follow that tutorial above then go to the windows disc 32 part.
Then drag the software over to start installing it on my nook. But, obviously I never got that far. Can you help me get the SD card to work again and tell me what I did wrong and what to do next so I can move forward to add CW & whatever android software will work well with flash. So I can use the other sites I mentioned in my other post.
If anyone can help I would appreciate it. I am stuck and not sure what to do next.
---------- Post added at 05:41 AM ---------- Previous post was at 05:33 AM ----------
Weird.
I just put the sd card in a usb card dongle that inserts the sd card into usb thumb drive and all of the sudden I see the drive on this computer now.
What should I do now?
Do I still have to go and do the windows disc 32 imager part.
Then drag and drop the software I need and drop in the card to my nook then install.
Or just drag software that I need like CM and Android and move forward with that.
Which should I do first. If it is the later part, which CM and Android should I use for the Nook color HD +?????
Thanks again for help and sorry about that first post, I swear it was it seeing it before. Weird.
Thanks, Karl
Google Play
I've followed all of the instructions and downloaded recovery, CM12 (cm-12.1-20160220-NIGHTLY-m7.zip), and gapps for 6.1. The system boots and I an navigate; however, Google play is not loading, when using the browser the content area becomes untouchable (touch screen in areas of the body of the page doesn't work), and there is not choice to set up a google account.
Any advice would be appreciated!
ummhasan said:
I've followed all of the instructions and downloaded recovery, CM12 (cm-12.1-20160220-NIGHTLY-m7.zip), and gapps for 6.1. The system boots and I an navigate; however, Google play is not loading, when using the browser the content area becomes untouchable (touch screen in areas of the body of the page doesn't work), and there is not choice to set up a google account.
Any advice would be appreciated!
Click to expand...
Click to collapse
What tablet are you having this issue with?
AFAIK currently there is no CM12 nightly build yet for the Nook HD+ ("ovation") or HD ("hummingbird"). Make sure you pick the CM build specific for your device (e.g., cm-11-20160208-NIGHTLY-ovation.zip for the Nook HD+); using a ROM build for a different device can brick your tablet.
Sent from my BN NookHD+ using XDA Premium HD app
Nook HD+ and Google Play
Thanks for your quick reply. This must be the problem. I originally installed the CM11 and Google Play did not work so I went out and found another 'walk through' via the link given to me last time and thought CM12 was the right choice.
I'll go back and reformat after getting the right gapps for CM11.
digixmax said:
What tablet are you having this issue with?
AFAIK currently there is no CM12 nightly build yet for the Nook HD+ ("ovation") or HD ("hummingbird"). Make sure you pick the CM build specific for your device (e.g., cm-11-20160208-NIGHTLY-ovation.zip for the Nook HD+); using a ROM build for a different device can brick your tablet.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
ummhasan said:
Thanks for your quick reply. This must be the problem. I originally installed the CM11 and Google Play did not work so I went out and found another 'walk through' via the link given to me last time and thought CM12 was the right choice.
I'll go back and reformat after getting the right gapps for CM11.
Click to expand...
Click to collapse
For CM11 I'd suggest you use the GApps package http://opengapps.org/?api=4.4&variant=nano.
digixmax said:
For CM11 I'd suggest you use the GApps package http://opengapps.org/?api=4.4&variant=nano.
Click to expand...
Click to collapse
Thanks, so what I did go back and reformat the sd card and start over with the early, cm recovery ovation, cm11, gapps 4.4; however, apparently I didn't unzip and copy the early correctly because after I rebooted the hd+ after going through the wipe/install process, I got an error that the setup wizard could not start. I powered off, wiped the sd card and began again following directions very carefully making sure the MLO was copied first.
Now, it seems I have somehow bricked the device because it will not power on and has only a green light when plugged in, instead of the normal amber. Any ideas of how to get it to turn on and boot to the SD again?
EDIT:
Okay, as I stated in my edit, I got it to boot, but I'm still getting the popup "Unfortunately, Setup Wizard has sopped. Any ideas?
Thanks for your time!!!
ummhasan said:
...
EDIT:
Okay, as I stated in my edit, I got it to boot, but I'm still getting the popup "Unfortunately, Setup Wizard has sopped. Any ideas?
...
Click to expand...
Click to collapse
Did you do a "wipe /data & factory reset" before you flash/install the zip files of CM11 ROM and GApps?
Did the installation of the 2 zip files succeed without error messages?
I got it working after I got it to bypass the error by dragging down the menu and connecting to wifi. Once I did that I was able to set up the Google account and everything was fine thereafter. There is a bit of flickering now and then, but everything seems to be working fine now. Thanks so much for your time and help!!!
Recover Data?
Hi,
I've jut reinstalled cm11 onto my nook HD+ & realise I failed to copy a text file over before I formatted the HDD. Is it possible to recover a deleted file off the nook HDD via a PC? I've tried changing the developer option settings - Android debugging on, ADB Over Network on & connecting via USB both MTP & UMS (I think that's what they were) but when I run any of my Data Recovery programs in win7, the drive isn't recognised as an option to recover from.
Any help would be appreciated,
Thanks