im unable to make a ftf file with flashtool. i unzip the file. then search it, select it in source folder. The flashtool never opens the file and subfiles. It never displays in the left column. Ive started with a zip file, then unziped it. Ive also tried winRAR to extract the files. Im using 2.9.1 Java 1.6.0_24 os 6.1
Any help or tips would be appreciated
Hey, you must sure that in the zip file just one file .ftf, if so, extract it. If there are 4 files like system, data ... you must rename the .zip file to .ftf
silveraero said:
Hey, you must sure that in the zip file just one file .ftf, if so, extract it. If there are 4 files like system, data ... you must rename the .zip file to .ftf
Click to expand...
Click to collapse
i thught you where changing it from a zip to a ftf. Not just renaming it
xxloudogxx said:
im unable to make a ftf file with flashtool. i unzip the file. then search it, select it in source folder. The flashtool never opens the file and subfiles. It never displays in the left column. Ive started with a zip file, then unziped it. Ive also tried winRAR to extract the files. Im using 2.9.1 Java 1.6.0_24 os 6.1
Any help or tips would be appreciated
Click to expand...
Click to collapse
All the files you want to bundle need to be in one folder and look similar to this
http://dl.dropbox.com/u/27083072/XDA/files.JPG
Then open flashtool and find the folder when you get to teh folder the location shoold appear blank, click open and you will get this
http://dl.dropbox.com/u/27083072/XDA/bundle.JPG
copy them to teh right, fill in the top, Device, Version, Branding and click OK
this is the file i downloaded. its a wb zip file. so i unzip it. i have a ziped and a unziped file on my desk top. then i open flashtool in administer. advance> bundle creation>select source folder.
this is the file folder. unzipped
a screen shoot of the folder.
http://forum.xda-developers.com/attachment.php?attachmentid=692379&stc=1&d=1313629311
once i select the main folder in flashtool it dont open it in small folder like you posted above.
uncompressed screen shot of folder.
http://forum.xda-developers.com/attachment.php?attachmentid=692389&stc=1&d=1313629741
xxloudogxx said:
uncompressed screen shot of folder.
http://forum.xda-developers.com/attachment.php?attachmentid=692389&stc=1&d=1313629741
Click to expand...
Click to collapse
OK, what you have is wolfbreaks rom, this is installed on your phone via xrecovery not an ftf file, if you want to install it you need to install xrecovery on your phone first, then install this from there.
You need a rooted rom for this, so is your rom rooted and what version are you on 2.1 or 2.3
I have x recovery on my phone know. That's how I upgraded from 2.1 to 2.3, because my phone is sim unlocked. Super user is v2.3.6.1 I followed a thread on the upgrade. I can link which thread when I'm home.
Sent from my X10i using XDA App
I've tried installing via x recovery, by loading the zip file on my as card and loading it with xrecovery. But I don't see the file when I'm in xrecovery. Something I'm prob doing wrong
Sent from my X10i using XDA App
first i would like to say thank you for all your help and tips. this site is the sh!t!! it was a noob mistake. when i looked back in the files in xrecovery it was listed.but once i scrolled down, there is was. oh man!! i spent hrs looking up threads and videos to see if there was something i was missing. there it was. one page down. lol. so i was able to install the new wb 3.5
thank you!!
time to look at what the differences in 3.6
Related
im trying to extract the nhb file from the open touch biggie ver 4.0. im on my last step and ive been looking around all day on how to extract that file. i have 7 zip and winrar and ive tried to use both but they would not work (i mean im know doin something right, lol) ive been reading all day because im reluctant to ask on here but i need help. what am i donin wrong. i read the noobs guide, the wiki guide and just bout every guide on here so please if you know can u help me. i just need this last step to finish my first flash
you downloaded the file, right? you should open the zip/rar file with 7zip or winrar. Then, drag/extract the file to your hardspl/uspl folder
yea i did dl it...that must be the step that i am missing dragging it to the hard spl folder. i used winrar to extract the files from the folder. then when the box comes up with the file drag it to the hard spl folder, then click that ruu folder? i think i might have to go back a re-read that last step because ive been so focused on getting that file out that i forgot what to do. thanks in advace for answering me
problem fixed. i was overthing things..after i downloaded the biggie file i extracted the file using 7 zip then i drug the file (nhb) and put it in the rom utility folder and ran it. problem solved this site is great. hopefully whoever else is searching for this problem finds this andit helps
How do I download hastarins 8.5 directly to my hd2, my pc is not working right now....Ty so much all
Sent from my Nexus One using XDA App
Um go to his thread, hit the download link then follow on from there?
Just use something like es file explorer then to move the files into your Android folder the same way you would on your pc, EXTREMELY straightforward!!!
bates_1974 said:
Um go to his thread, hit the download link then follow on from there?
Just use something like es file explorer then to move the files into your Android folder the same way you would on your pc, EXTREMELY straightforward!!!
Click to expand...
Click to collapse
do we copy all the files in the zip file ? or certain files . cause i noticed there is a readme file inside. how about the DEV folder ? I read somewhere before dont need that as well. But im not sure. .. able advise ?
pool7979 said:
do we copy all the files in the zip file ? or certain files . cause i noticed there is a readme file inside. how about the DEV folder ? I read somewhere before dont need that as well. But im not sure. .. able advise ?
Click to expand...
Click to collapse
The dev folder isn't needed for anything other than devs from what I remember, all you need to copy is the root folder (this goes in the android folder eg SD/Android/Root) and replace your existing zImage with the one included, simply put extract all minus the dev folder
why when i try to restore this roms it said "MD5 mismatch!"..?
how can i fix this so i can install this roms..?
HAKA posted unwillingly a corrupted zip at first. Make sure you are flashing the new one.
maliceomalice said:
why when i try to restore this roms it said "MD5 mismatch!"..?
how can i fix this so i can install this roms..?
Click to expand...
Click to collapse
When you extracted the file.. He created a folder name [GingerFroyo.1.4.16]
Just open this Folder and inside you will see another folder in the same name..
This is one that you should copy in xrecovery/backup/ folder.. this file contains 4 files..
Chris95X8 said:
HAKA posted unwillingly a corrupted zip at first. Make sure you are flashing the new one.
Click to expand...
Click to collapse
i dont quite understand what u mean by flashing the new one. i download the newest (i think) v1.4.16_2...rite?
malungkot said:
When you extracted the file.. He created a folder name [GingerFroyo.1.4.16]
Just open this Folder and inside you will see another folder in the same name..
This is one that you should copy in xrecovery/backup/ folder.. this file contains 4 files..
Click to expand...
Click to collapse
when i open gingerfroyo folder, i do not see another folder. all i see is 4 files...
maliceomalice said:
i dont quite understand what u mean by flashing the new one. i download the newest (i think) v1.4.16_2...rite?
Click to expand...
Click to collapse
Just make sure you have downloaded the new one. Extract it on your PC and you will have a folder named GingerFroyo 1.4.16
Put that folder in SD > xrecovery > backup
Restore and make full wipe
maybe my download was the problem..i'll try to download it again...thank you for helping
better try to redownload, and see what will happen
maliceomalice said:
when i open gingerfroyo folder, i do not see another folder. all i see is 4 files...
Click to expand...
Click to collapse
I just downloaded the file just now, and when I extracted the file it came with the folder [GingerFroyo.1.4.16].. and inside that folder I saw a folder again in the same name..
this is the folder as just copy in xrecover/backup
yep, there is 4 file..drag the folder again to sd->xrecovery->backup. and put the folder there. reboot with xrecovery, choose back up and restore, select restore->GingerFroyo.1.4.16. after finish installation, make sure u make factory reset (full wipe). then reboot.
maliceomalice said:
when i open gingerfroyo folder, i do not see another folder. all i see is 4 files...
Click to expand...
Click to collapse
maybe you should have a look on the thread with help in flash on http://forum.xda-developers.com/showthread.php?t=921652
hi guys..
im unable to install any video player... nothing works...
pls help....
did you try rock player ?
rtzuiop said:
did you try rock player ?
Click to expand...
Click to collapse
tried every player available on market.. rockplayer, vplayer, moboplayer etc,..
i tried wiping cache also, i think problem is with this rom..
Hi @all,
I´m using the Flashtool and other provided tools here in the Forum for a long time (thanks to all people who are involved in the developing)
Now I want to give something back.
I´m not a developer but I understand (hopefully) basic things.
I have also some phones which does not support the flashmode so I am reliant to the fastboot mode and CWM.
At this point my goal was to flash the stock ROM to the Xperia Z.
I found a tuturial how to make a flashable zip file for CWM but it was for old devices with yaffs2 filesystem and the new ones have ext4.
After some search I found everything what is needed and I want to share it with you.
The Tutorial covers basic things but maybe it will help some people who will try it.
Step 1
Download the Stock-FW you want (FTF-File)
Step 2
Rename the .ftf File to .zip
Step 3
Extract the system.sin (with 7zip or WinRar for example)
Step 4
Open Flashtool go to "Tools" -> "Sin Editor" -> Choose the extracted system.sin and push "extract" Data
Step 5
You will get an system.ext4 file
Step 6
We have to extract the files which are in the system.ext4 file - for this I used the DiskInternal Linux Reader
Step 7
After extracting the files you have to put all the files in a folder named "system" (low letters)
Step 8
Create a folder named for example "Firmware"
Step 9
Put the "system" folder in the "Firmware" folder
Step 10
Download the Attached META-INF File - extract it and copy the META-INF Folder in the "Firmware" folder
Step 11
Now you have in your "Firmware" folder two sub-folders
"system" and "META-INF"
Now you only have to zip the both folders for example with 7zip or WinRar
Important: You have to set the compression to "Store"
Step 12
Copy the zip File to your SD-Card and flash it with CWM
If you want you can now add files to the system folder - like busy box - and or modify things and flash it over CWM.
Special thanks to Bin4ry
Best regards
UserX10
Learned ! Thank you.
Nice tutorial!
EDIT: The flashable zip is huge (990MB), did this have anything to do with the compression being set to 'store'?
xL3thalTuRdZz said:
Nice tutorial!
EDIT: The flashable zip is huge (990MB), did this have anything to do with the compression being set to 'store'?
Click to expand...
Click to collapse
If you don't set it to store it wont work at all, no rom/flashable zip have anything other than store compression the same goes for bootanimations
Edit: OP/Mod you might just want to change TFT file to FTF in step 1
Sent from my GT-i9100 using Tapatalk 2
Edit2: It seems like this only goes for bootanimations, sorry my bad.
Great.....learning it now
Thanks for the positive feedback.
Changed also the typo on Step 1
I've tried setting compression to 'Normal' and all seems to be going fine...
Sent from my C6603 using xda app-developers app
Can this be applicable to nxt devices like mine?thanks for the tutorial...
Sent from my LT22i using Tapatalk 2
how to extract from ext4
can you explain with details :fingers-crossed:
im getting ext4 file again after extracting !
ShivangDave said:
can you explain with details :fingers-crossed:
im getting ext4 file again after extracting !
Click to expand...
Click to collapse
You have to selected the .ext4 file open with LinuxReader. (like you .doc file with Word)
LinuxReader will "mounted" it in his own window, open your "new" disk (2Go) then select the "Save" option above...
tempofestival said:
You have to selected the .ext4 file open with LinuxReader. (like you .doc file with Word)
LinuxReader will "mounted" it in his own window, open your "new" disk (2Go) then select the "Save" option above...
Click to expand...
Click to collapse
did it via linux ! thanks any way !
When I tried to extract Xperia S's stock rom from the ftf using DiskReaderInternals, then the rom would boot but USB would never work. Even the guy above me (ShivangDave) tried extracting using DiskReaderInternals for Miro but the rom failed to boot and got stuck at the Sony logo. That's why it is better to use linux to extract the system.ext4 image.
i want to make a flashable zip to install aps
UserX10 said:
Important: You have to set the compression to "Store"
Click to expand...
Click to collapse
How do I set the compression to "Store"?
Thanks a lot for your guide!
MinnesotaVikings1961 said:
How do I set the compression to "Store"?
Thanks a lot for your guide!
Click to expand...
Click to collapse
whenever you add file in archive it will show a box first ! 'NORMAL' is default ! change it to 'Store' !
Please!
Does this tutoriral can be applied to other models as Neo V.
Thank you and best regards!
fer14 said:
Please!
Does this tutoriral can be applied to other models as Neo V.
Thank you and best regards!
Click to expand...
Click to collapse
This Tutorial should also work with the Neo V. Only one thing could be different.
But depending on your Android Version (when I remember well) it could be possible that you have instead of an ext4 file a yaffs2 file. In this case you can search the forum for an how to for this extension.
TheHawk002 said:
If you don't set it to store it wont work at all, no rom/flashable zip have anything other than store compression the same goes for bootanimations
Click to expand...
Click to collapse
I use a template for flashing various things and I just drop stuff in it using Normal compression and it flashes ok, might be more important for full ROMs or zips to be run on the Phone like a boot animation, but for flashing the odd apk or other file I don't think it matters.
UserX10 said:
This Tutorial should also work with the Neo V. Only one thing could be different.
But depending on your Android Version (when I remember well) it could be possible that you have instead of an ext4 file a yaffs2 file. In this case you can search the forum for an how to for this extension.
Click to expand...
Click to collapse
XperienceD said:
[GUIDE] How to make your regional firmware an .FTF file
[Guide] How make a FTF of stock firmware from SUS files
[GUIDE]How to make a rooted flashable rom from ftf file[FOR ALL XPERIA PHONES]
[tutorial] | how to extract system.sin
[tutorial] step by step method to extract ftf file from ics [ics]
[Tool] Yaffey - Utility for reading, editing and writing YAFFS2 images
Click to expand...
Click to collapse
UserX10 said:
Hi @all,
I´m using the Flashtool and other provided tools here in the Forum for a long time (thanks to all people who are involved in the developing)
Now I want to give something back.
I´m not a developer but I understand (hopefully) basic things.
I have also some phones which does not support the flashmode so I am reliant to the fastboot mode and CWM.
At this point my goal was to flash the stock ROM to the Xperia Z.
I found a tuturial how to make a flashable zip file for CWM but it was for old devices with yaffs2 filesystem and the new ones have ext4.
After some search I found everything what is needed and I want to share it with you.
The Tutorial covers basic things but maybe it will help some people who will try it.
Step 1
Download the Stock-FW you want (FTF-File)
Step 2
Rename the .ftf File to .zip
Step 3
Extract the system.sin (with 7zip or WinRar for example)
Step 4
Open Flashtool go to "Tools" -> "Sin Editor" -> Choose the extracted system.sin and push "extract" Data
Step 5
You will get an system.ext4 file
Step 6
We have to extract the files which are in the system.ext4 file - for this I used the DiskInternal Linux Reader
Step 7
After extracting the files you have to put all the files in a folder named "system" (low letters)
Step 8
Create a folder named for example "Firmware"
Step 9
Put the "system" folder in the "Firmware" folder
Step 10
Download the Attached META-INF File - extract it and copy the META-INF Folder in the "Firmware" folder
Step 11
Now you have in your "Firmware" folder two sub-folders
"system" and "META-INF"
Now you only have to zip the both folders for example with 7zip or WinRar
Important: You have to set the compression to "Store"
Step 12
Copy the zip File to your SD-Card and flash it with CWM
If you want you can now add files to the system folder - like busy box - and or modify things and flash it over CWM.
Special thanks to Bin4ry
Best regards
UserX10
Click to expand...
Click to collapse
I tried this on Xperia SP but the installation is aborted, does this supports Xperia SP? If not, how can I make another one for Xperia SP? Thanks
tdth said:
I tried this on Xperia SP but the installation is aborted, does this supports Xperia SP? If not, how can I make another one for Xperia SP? Thanks
Click to expand...
Click to collapse
which error ?
---------- Post added at 08:52 PM ---------- Previous post was at 08:50 PM ----------
tdth said:
I tried this on Xperia SP but the installation is aborted, does this supports Xperia SP? If not, how can I make another one for Xperia SP? Thanks
Click to expand...
Click to collapse
this works... make sure you have correct update-binary file and also script !
Official Sony Z3 Compact Concept marshmallow 6.0 edition build 2099 ftf file
Fix file link
https://mega.nz/#!v9gFDSrY!ZoJJDPDgU0dLIP7qrhF9yDm4x3CiWMRVye-XHe_jw0o
http://www.mediafire.com/download/qtk1z6t8cks3q9o/6.0_concept_Z3compact_2099_fix.ftf
Thanks @Jozinek for first release
Is this for the Compact?
Edit: I've just seen the file name
doesn't show under Flashtool
Seems to have been packaged or compressed incorrectly. I have extracted the FTF, which appears to be an ordinary zip, and am making a bundle with the files from the zip with FlashTool, which I'll then try to flash on top of 2085...
LadFromWales85 said:
Seems to have been packaged or compressed incorrectly. I have extracted the FTF, which appears to be an ordinary zip, and am making a bundle with the files from the zip with FlashTool, which I'll then try to flash on top of 2085...
Click to expand...
Click to collapse
file 6.0_concept_Z3compact_2099.ftf
6.0_concept_Z3compact_2099.ftf: Zip archive data, at least v2.0 to extract
right you are
missing meta-inf/manifest.mf file that's why flashtool won't recognize as ftf
Thanks, i can make a zip flashable prerooted whit prf creator?
I'm repackaging same as @LadFromWales85. Let's see how it goes
Yes i upload wrong file sorry
Open ftf files with 7zip file manager
Open attached meta-inf.zip, extraxt meta-inf folder and copy to ftf files on 7zip.
Flashed now, without your META-INF, though I need to factory reset as I haven't done it since Lollipop and Google Play Services randomly force closes, as does Album.
I really don't want to though, as without USB mass storage access to the internal memory I can't correct the file modify time for pictures and they get sorted wrong in galleries. That and I'll have a Z5p soon so don't want to invest too much time fiddling with this!
miguelel3men2 said:
Thanks, i can make a zip flashable prerooted whit prf creator?
Click to expand...
Click to collapse
No we dont have recovery for locked bootloader yet.
master' said:
No we dont have recovery for locked bootloader yet.
Click to expand...
Click to collapse
Ok ?
Can I install this ftf in a Z3 Compact with a locked bootlader?
Thanks!
yes you can.
i put the ftf file in the firmwear folder but the flash program wont recognize it
nvm i figured it out
Any available mirror op? just download the file via mega and it got stuck on 99%
After adding the missing Meta-File everything worked like a charm THANK You.
Fix file uploading mega and mirror, when done i will add first post.
how to add the meta-file. I opened in 7zip the ftf file and extracted the meta.zip file but i don't get any option to paste file inside the opened 7zip program
Still waiting for the Ota to arrive. Don't understand why it takes so long...