Related
Hi there i had a problem 2 month ago installing 2endint on my defy anyway i installed CM7 using the custom recovery, now i have CWM installed so i was wonder if i can install MS2Ginger over CM7 thanks
I've not had success with it. I usually have to flash a Froyo SBF before going to a Gingerblur ROM.
Monzer_ said:
Hi there i had a problem 2 month ago installing 2endint on my defy anyway i installed CM7 using the custom recovery, now i have CWM installed so i was wonder if i can install MS2Ginger over CM7 thanks
Click to expand...
Click to collapse
i was able to install ms2 ginger over cm7 and again cm7
Yes, you can. However, after installing the CM7 zip, you need to flash this fixed sbf using RSD Lite.
Zorua said:
Yes, you can. However, after installing the CM7 zip, you need to flash this fixed sbf using RSD Lite.
Click to expand...
Click to collapse
what is this fixed sbf for ? and should i flashed it after i install MS2Ginger ? thanks
You wipe data in 2ndinit, boot into the flashing menu, flash fixed sbf, reboot phone ibto 2nd init recovery, advanced restore, boot, then system, then devtree, then data, then reboot
Sent from my MB525 using Tapatalk
ok so this fixed SBF for CM7 in case i wanna come back from MS2Ginger to CM7 right ?
Yes, that's right. After you install the CM7 zip from clockworkmod, hold up button while rebooting and flash this fixed sbf using RSD Lite. Make sure you clear data and cache from clockworkmod after flashing the fixed sbf.
another question its maybe out of the thread but does it matter that i didnt use 2endinit to install CM7 or not ? coz i used custom recovery i mean is there any side effects ?
Yes, there could be some problems. You should install 2nd init, format data and cache, install CM7 and install the fixed sbf after that. Should work fine then.
Sent from my MB525 on the latest CM 7.2 Nightlies using XDA App
Zorua said:
Yes, that's right. After you install the CM7 zip from clockworkmod, hold up button while rebooting and flash this fixed sbf using RSD Lite. Make sure you clear data and cache from clockworkmod after flashing the fixed sbf.
Click to expand...
Click to collapse
i was able to come back to cm7 from ms2ginger without flashing the fixed sbf . i have ms2ginger 2.1 for green lens i.e soc module
so if i didn't flashed fixed sbf over ms2ginger will i not be able to get back to my nandroid of 2.2.2 version?
please correct me!
Adityaak said:
i was able to come back to cm7 from ms2ginger without flashing the fixed sbf . i have ms2ginger 2.1 for green lens i.e soc module
so if i didn't flashed fixed sbf over ms2ginger will i not be able to get back to my nandroid of 2.2.2 version?
please correct me!
Click to expand...
Click to collapse
Adityaak did u install ms2gigner over cm7 ?? if u did are u having any problem with it like rebooting it self ?? thanks in advance
Monzer_ said:
Adityaak did u install ms2gigner over cm7 ?? if u did are u having any problem with it like rebooting it self ?? thanks in advance
Click to expand...
Click to collapse
yeah i restored the nandroid of ms2ginger2.1 over CM7 and the ms2ginger 2.1 is really good i love it battery backup is really nice just some FC with the camera at starting but now i day i dont even get those FC for the camera i'm loving this ROM.
I am attempting to flash CM7 stable on my stock 2.3.5 fascinate, with CwM recovery ( 2.5.1 ). But I get this error- "assert failed: getprop(re.product.device)"
Anyone know what the problem is?
You need to use the CWM in the OP of the nightly thread.
http://forum.xda-developers.com/showthread.php?t=1190668
Its an attached file.
Also IMO the nightlies are better than the stable.
imo the cm7 skang by makelegs is better than all of them!
mentose457 said:
You need to use the CWM in the OP of the nightly thread.
http://forum.xda-developers.com/showthread.php?t=1190668
Its an attached file.
Also IMO the nightlies are better than the stable.
Click to expand...
Click to collapse
Thanks, cm7 is running great, except for one problem. I cannot install the google add ons. I flashed the add ons from the cm wiki ( I cleared catch before ), and it seemed to have flashed correctly but when I reboot there is nothing. I have fixed permissions via rom manager, but still no add ons. I am running the CWM from the link you provided.
StevaB793 said:
Thanks, cm7 is running great, except for one problem. I cannot install the google add ons. I flashed the add ons from the cm wiki ( I cleared catch before ), and it seemed to have flashed correctly but when I reboot there is nothing. I have fixed permissions via rom manager, but still no add ons. I am running the CWM from the link you provided.
Click to expand...
Click to collapse
I would try mounting /system (in cwm) before flashing gapps.
Sent from my SCH-I500 using Tapatalk
it says "error mounting /system", any other solution?
mentose457 said:
I would try mounting /system (in cwm) before flashing gapps.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
Says "Error mounting /system", should I install another version of cwm?
StevaB793 said:
Says "Error mounting /system", should I install another version of cwm?
Click to expand...
Click to collapse
Try holding the power button > reboot recovery > flash this kernel in recovery.. http://androtransfer.com/tk-glitch/CM7kernels/Glitch 13.1/CM7Fascinate-Glitch-V13_1-REL.zip
That should update your recovery to the latest CWM. After that, reboot into recovery again, wipe cache/dalvik cache and flash the latest GAPPS for CM7. That should get you working.
While updating the u8800 to the official 2.3.5 the mf failed at the end, i tried again and failed again, even the original stock rom (portuguese tmn) don't install, can somebody help me? i managed to install cwm with the pink screen but the custom roms don't work either. :/
Try the official update install 2.3.5 with power cord applied without battery.
Sent from my u8800 using XDA App
It's not working, and o don't know why...
The official 2.3.5 don't work or the 2.2.1 from TMN or ever the 2.2.2 from overseas... This is f**** annoying... :/
Leave only dload folder in root of sdcard, i had problems when i had some other folders in root of sd.
Sent from my u8800 using XDA App
I also did that, i don't know why he's not working....
Try cwm wipe/factory reset, wipe cache, wipe dalvik. And try to install official after that.
Sent from my u8800 using XDA App
Setneuf said:
I also did that, i don't know why he's not working....
Click to expand...
Click to collapse
Had you previously changed the partition sizes of the phone?
Mine failed until I reverted back to stock partition sizes.
I did that before updating... the cwm show me error while trying to access the /system and other paths, and i don't know why
Setneuf said:
I did that before updating... the cwm show me error while trying to access the /system and other paths, and i don't know why
Click to expand...
Click to collapse
Which CWM are you using (5.2.6 or 5.5.0.4??). Maybe the latter one might help?
http://forum.xda-developers.com/showthread.php?t=1377390
Title says it all: I get symlink: some symlinks failed, status 7 error, installation aborted when I try to install Quarx's CM10 (2nd boot). Haven't tried any other JB, since I can't find any that fits. Maybe something with 2nd boot? It seems not to work on my phone...
I tried google-ing the problem, found some information about removing lines from updater-script, but the line was not even there (something with asserts).
Defy red lens MB525
Try a system wipe. That error is because of some filesystem problem, not 2ndboot
Sent from my MB526 using Tapatalk 2
I tried wiping with AROMA wiper yesterday: ext4, wipe data, system, cache, dalvik, then NO reboot and install cm 10... it failed as hell.
ive had the same issue as you with cm10 2ndboot. i moved on after trying to get it installed for months. 10.2 is awesome! just make sure you start from a fresh sbf flash and reroot and all that jazz. also, start with twrp!
undyingvisage58 said:
ive had the same issue as you with cm10 2ndboot. i moved on after trying to get it installed for months. 10.2 is awesome! just make sure you start from a fresh sbf flash and reroot and all that jazz. also, start with twrp!
Click to expand...
Click to collapse
thanks for the advice but i can't seem to install twrp. goomanager is not available for stock éclair/froyo, and without installing any cwm i can't install twrp. also, i tried to install twrp from cm9's cwm, it wrote success but after reboot i still had cwm. WUT
Dummy question: did you try to download another ROM?s zip file ?
Alka-Seltzer PLUS said:
Dummy question: did you try to download another ROM?s zip file ?
Click to expand...
Click to collapse
I tried different nightlies of JB 4.1, 4.2, 4.3, MIUI JB. Also did clean install with 0 success. I'm getting close to the problem, and reached this far:
1.: My CWM (5.x.x.x) does not support the 2nd boot updater script. I don't know how could I upgrade to CWM v6 (seriously, I searched a lot but nothing.)
2.: I can't install TWRP. I mean... Éclair and froyo does not support GooManager to install from an app, and I can only install CWM from 2ndinit.apk. From CWM I install TWRP, it says: "Whoah you are great bro, reboot recovery!" I do that and boom CWM again.
Srsly.: HOW can this happen to me? Other ppl resolved this problem by flashing DFP sbf to their normal Defy (red lens). I won't do that. You know, there must be a way I can install CWM v6 or TWRP. But how? If anyone gives me a solution for my problem which is going on for half a year... I'll get a heart attack I'll be so happy
Uhm.... recently i had to start from SBF and had no problem installing last ( Quarx's ) build of 4.1.2 after having installed the first 2ndinit i downloaded from the web ... so... write exactly your steps ( i know, i know, .. but .... where'R talking through a monitor and misunderstandings are waitnig for us )
Alka-Seltzer PLUS said:
Uhm.... recently i had to start from SBF and had no problem installing last ( Quarx's ) build of 4.1.2 after having installed the first 2ndinit i downloaded from the web ... so... write exactly your steps ( i know, i know, .. but .... where'R talking through a monitor and misunderstandings are waitnig for us )
Click to expand...
Click to collapse
I start from sbf (Froyo). Install 2ndinit apk, install 2ndinit, reboot, wipe data cache dalvik, (try to) install cm10.x > status 0 or status 7
I start from cm9(epsylon build). Reboot into recovery, (try to) install cm10.x > status 0 or status 7
I start from cm9(epsylon build). Reboot into recovery, AROMA Wipe (system, data, cache) into Ext4, (try to) install cm10.x > status 0 or 7
After these, I can't revert to any rom even if i format to ext3 with AROMA Wiper. Cuz' my defy goes soft-bricked and i have to recover it RSD Lite.
Do not reboot after wiping/formatting system. Immediately flash some ROM. Ext3 --> CM7.
Sent from my MB526 using xda app-developers app
gyorgyszemok said:
I start from sbf (Froyo). Install 2ndinit apk, install 2ndinit, reboot, wipe data cache dalvik, (try to) install cm10.x > status 0 or status 7
I start from cm9(epsylon build). Reboot into recovery, (try to) install cm10.x > status 0 or status 7
I start from cm9(epsylon build). Reboot into recovery, AROMA Wipe (system, data, cache) into Ext4, (try to) install cm10.x > status 0 or 7
After these, I can't revert to any rom even if i format to ext3 with AROMA Wiper. Cuz' my defy goes soft-bricked and i have to recover it RSD Lite.
Click to expand...
Click to collapse
No rooting between sbf (Froyo) and installing 2ndinit apk ?
hotdog125 said:
Do not reboot after wiping/formatting system. Immediately flash some ROM. Ext3 --> CM7.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Ehm, I didn't reboot after system format, I know that I shouldn't or I get softbricked.
Alka-Seltzer PLUS said:
No rooting between sbf (Froyo) and installing 2ndinit apk ?
Click to expand...
Click to collapse
Yea. It's rooted by default when i flash it....
gyorgyszemok said:
Yea. It's rooted by default when i flash it....
Click to expand...
Click to collapse
I would try to check the md5 at this point
gyorgyszemok said:
Ehm, I didn't reboot after system format, I know that I shouldn't or I get softbricked.
Click to expand...
Click to collapse
I started with sbf, Framaroot, 2ndinit. Then I directly flashed CM10 (9th July) and it flashed successfully. The latest dual recovery has CWMv6, but it's only for CM10 ROMs. Have you tried pre-TWRP builds (maybe the November builds)?
Or maybe, other ROMs like PA, PAC, etc.?
gyorgyszemok said:
Title says it all: I get symlink: some symlinks failed, status 7 error, installation aborted when I try to install Quarx's CM10 (2nd boot). Haven't tried any other JB, since I can't find any that fits. Maybe something with 2nd boot? It seems not to work on my phone...
I tried google-ing the problem, found some information about removing lines from updater-script, but the line was not even there (something with asserts).
Defy red lens MB525
Click to expand...
Click to collapse
Happened to me to before. Try change your kernel. Stock kernel cant flash cm10 and its variant. It'll give status 7 error. When i change to other kernel ex;BL v12 no problem at all.
aiis89 said:
Happened to me to before. Try change your kernel. Stock kernel cant flash cm10 and its variant. It'll give status 7 error. When i change to other kernel ex;BL v12 no problem at all.
Click to expand...
Click to collapse
I forgot to add that my problem got resolved like a month ago.
My main problem was that I couldn't install any JB rom because of status 0, status 7 or bootloop (always), so I went radical:
I flashed DFP231.sbf (for defy plus) on bayer lens defy (MB525!), used Framaroot to root, installed LATEST(!) cwm, and then I could install CM10.x with no problem!
I tried to install TWRP from CWM. The process goes down, it tells me to reboot recovery. I rebooted, and still, i have CWM. What should i do?
defy red lens cm9 epsylon
if youre not opposed to starting over with a fresh sbf, then do just that. this time stick to twrp. seems to be doing much better than CWM
undyingvisage58 said:
if youre not opposed to starting over with a fresh sbf, then do just that. this time stick to twrp. seems to be doing much better than CWM
Click to expand...
Click to collapse
but i can't install twrp. i just does not replace cwm, and from froyo or éclair i cant install it with goomanager. from cm9 goomanager tells my device is not supported
gyorgyszemok said:
but i can't install twrp. i just does not replace cwm, and from froyo or éclair i cant install it with goomanager. from cm9 goomanager tells my device is not supported
Click to expand...
Click to collapse
my next advice is to learn how to manage your own roms without goomanager. for the most part you can read the tutorials on the defy wiki page to install "2ndInit Recovery". then use the 2ndinit recovery to install twrp. from there you install 10.2/4.3 and enjoy. just make sure you know well how to do sbf flashes just in case you goof and softbrick your phone in the process.
plus you should be able to install goo manager once youve settled in with twrp.
undyingvisage58 said:
my next advice is to learn how to manage your own roms without goomanager. for the most part you can read the tutorials on the defy wiki page to install "2ndInit Recovery". then use the 2ndinit recovery to install twrp. from there you install 10.2/4.3 and enjoy. just make sure you know well how to do sbf flashes just in case you goof and softbrick your phone in the process.
plus you should be able to install goo manager once youve settled in with twrp.
Click to expand...
Click to collapse
You misunderstood me maybe. I never used Goomanager. The first time I did was like 2 days ago when I found out I can't install CM10.x with CWM v5, but v6 or TWRP, and tried to install TWRP from it. It didn't work. Also, the TWRP flashable zip won't install from CWM. I mean... It says it's ok and reboot recovery but nothing. Gwah I know all about sbf flashes in case of softbrick and all...
edit: im very, VERY familiar with cwm... never used any apk to manage my roms just 2ndinit to install.
gyorgyszemok said:
You misunderstood me maybe. I never used Goomanager. The first time I did was like 2 days ago when I found out I can't install CM10.x with CWM v5, but v6 or TWRP, and tried to install TWRP from it. It didn't work. Also, the TWRP flashable zip won't install from CWM. I mean... It says it's ok and reboot recovery but nothing. Gwah I know all about sbf flashes in case of softbrick and all...
edit: im very, VERY familiar with cwm... never used any apk to manage my roms just 2ndinit to install.
Click to expand...
Click to collapse
theres nothing else i can help you with then. all i can say is start from sbf flash and stay away from cm 10 2ndboot
Maybe not enough memory?
Sent from my MB526 using xda app-developers app
undyingvisage58 said:
theres nothing else i can help you with then. all i can say is start from sbf flash and stay away from cm 10 2ndboot
Click to expand...
Click to collapse
yeah... but i'd like to try it at least...
hotdog125 said:
Maybe not enough memory?
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I don't think so. Something is very fishy about my phone. very-VERY strange... I can't install cm10.x cuz' of no update-binary support in cwm v5, and i can't find a way to make TWRP work, nor can I find any CWM v6 install methods... srsly WUT EVERY OTHER stuff works as intended. everything. all roms before jelly bean. i need to make twrp work or a cwm v6 installation.
gyorgyszemok said:
yeah... but i'd like to try it at least...
I don't think so. Something is very fishy about my phone. very-VERY strange... I can't install cm10.x cuz' of no update-binary support in cwm v5, and i can't find a way to make TWRP work, nor can I find any CWM v6 install methods... srsly WUT EVERY OTHER stuff works as intended. everything. all roms before jelly bean. i need to make twrp work or a cwm v6 installation.
Click to expand...
Click to collapse
Only CM10.2 needs the new CWMv6. CM10 and CM10.1 should work.
Your phone seems to trolling you:laugh:. But seriously, as a last resort I would flash DFP sbf. Gingerbread isn't half bad (especially with MS2Ginger, which is really stable and is compatible with Green Lens too).
hotdog125 said:
Only CM10.2 needs the new CWMv6. CM10 and CM10.1 should work.
Your phone seems to trolling you:laugh:. But seriously, as a last resort I would flash DFP sbf. Gingerbread isn't half bad (especially with MS2Ginger, which is really stable and is compatible with Green Lens too).
Click to expand...
Click to collapse
Well then it's trolling me 'cuz CM10 gives the same status 7 error. It IS trolling me. But i'm scared of flashing a DFP sbf. What if things go wrong? I won't be able to rollback then.
You can try to use twrp on gb roms by replacing the boot menu folder in system by that of cm10 or later. Try once with a clean folder, and once by copying over the existing files.
As for defy plus sbf, if you have a green lens, camera won't work on any gb except ms2ginger. In addition a battery patch must be flashed after every rom for full charging. For red lens only battery patch has to be flashed.
None of the above applies to cm10 and later.
Sent from my MB526 using Tapatalk 2
gyorgyszemok said:
Well then it's trolling me 'cuz CM10 gives the same status 7 error. It IS trolling me. But i'm scared of flashing a DFP sbf. What if things go wrong? I won't be able to rollback then.
Click to expand...
Click to collapse
If things go wrong, try a different SBF.
thekguy said:
You can try to use twrp on gb roms by replacing the boot menu folder in system by that of cm10 or later. Try once with a clean folder, and once by copying over the existing files.
As for defy plus sbf, if you have a green lens, camera won't work on any gb except ms2ginger. In addition a battery patch must be flashed after every rom for full charging. For red lens only battery patch has to be flashed.
None of the above applies to cm10 and later.
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
I tried replacing the bootmenu folder with different apps, but all got some "Operation failed!" or "Error with files" in itself, so I also tried to replace some of the files 1 by 1, they still failed. So that could be the reason why the zip won't flash properly... Maybe some safety option somewhere in CM9??? My phone can't seem to handle the recovery zips, only the 2ndinit apk. Very strange!
That must be done from recovery. I recall helping someone replace the recovery using a flashable zip because only a legacy recovery worked for him. I think it was zer0-gravity. Check my posts on that.
Replacing the recovery files with twrp ones in the zip I had made on that thread should with hopefully.
Also, your problems indicate file system errors, and I'll advise you to flash a different(higher) sbf, since that has in the past worked out well, for me and others. Beyond this point I'm out of ideas.
Sent from my MB526 using Tapatalk 2
thekguy said:
That must be done from recovery. I recall helping someone replace the recovery using a flashable zip because only a legacy recovery worked for him. I think it was zer0-gravity. Check my posts on that
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
another fast question. i recover my phone using the JORDN_U3_97.21.51 method, after that i have to do a root, nandroid, then instantly flash a fixed sbf (firmware.sbf...). its cuz i got the phone 2nd hand, and he f-ed up smth upgrading to gingerbread or so... can it be the root of my problem?
http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143
Why do you need a fixed sbf? After rooting try directly 2ndinit. Don't restore nandroid. Also, root using framaroot since its much easier and faster. You can jump from 2.1 to
2ndboot directly.
Sent from my MB526 using Tapatalk 2
thekguy said:
Why do you need a fixed sbf? After rooting try directly 2ndinit
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Cuz' my mb525 got flashed a GB sbf accidentally, from which you can't downgrade (by its user before me), and you can only recover it from éclair via the method i linked. other sbf's wont work
Ok, so when you flash the first sbf, and root, what stops you from directly using 2ndboot at that point
Sent from my MB526 using Tapatalk 2
thekguy said:
Ok, so when you flash the first sbf, and root, what stops you from directly using 2ndboot at that point
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
It just won't install, with status 0 or 7.
But right now I grew tired of this problem and i will flash a DFP 231.sbf from here:
http://forum.xda-developers.com/showthread.php?t=1542956
I will follow these steps. Can i do that? (MB525 Red Lens)
edit: 4.5.1-134 DFP-231 Retail.en.EU CEE
Yes. Flash that and root with framaroot.
Don't follow the guide for rooting, just flash dfp 231 , if it hangs on moto wipe data and cache from stock, and use framaroot.
Depending on eu or cee you've flashed, you may require a kernel to boot successfully with 2ndboot roms(otherwise you will just hang even after waiting a lot). It can be found in the defy custom kernel thread in General
Best of luck
Sent from my MB526 using Tapatalk 2