Related
Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob
Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.
I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.
For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.
@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!
Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!
tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?
Then your best bet is to flash with a goldcard
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?
Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?
No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304
Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck
sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....
That app should be Task 29.
Problem:
Won't boot into any ROM.
Phone Details at Start:
Telstra HD2, HSPL 2.08, Radio 2.15.50.14, magldr 1.12, Windows Phone 7
Description:
I was running Windows Phone 7 when it decided to crash and restart. However it got stuck in a restarting loop; restart then crash during loading which caused it to restart then crash, etc. Then magldr came up with 1EFATAL HIT 1.
I figured WP7 had somehow corrupted part of the install but nothing I can do seems to fix it.
I have tried:
-Reflashing it with WP7.
-Reflashing it with another WP7 build.
-Reflashing to magldr 1.13 then WP7 again.
But none of these worked so I tried to go for a NAND Android build. However I couldn't get the ClockWork Mod to work. It too failed to boot with the same problem as WP7. Now I just wanted to get the phone in a working state again so I have tried:
-Formatting the SD card
-Reflashing to a custom winmob6.5 build
-Reflashing to a custom winmob6.5 build I had previously used and worked fine
-Changing the Radio to 2.14.50.02 then reflash to a custom wm6.5
-Changing the Radio to 2.12.50.02_02 then reflashing to a custom wm6.5
When I try the custom wm6.5 rom I see the boot screen but it just sits there and goes no further. I have tried installing an old copy of the chunky rom (as it changed the boot screen ) but still just sits at the boot screen.
I have tried redownloading all of the files I'm flashing with in case there was a problem downloading it. Also I have tried using files I already had which were working, but nothing seems to have fixed it.
Some things I have noticed are:
-that all flashings have and still load without error
-that it doesn't have any problems loading into the HSPL
-when ever I tried an install with magldr usb flash (CWM or WP7) it would work but at the end of the flash it said it would restart but never did. I had to remove the battery
-loading into magldr I could select the restart or powerdown option but it would just hang and again I had to remove battery to turn it off
Does anyone have any suggestions as to what I can try to get it fixed? The only things have haven't tried are flashing with a stock rom or reflashing another HSPL. Both of those I though could cause trouble for the currently working HSPL, which if I lost would cause more problems. Currrently I am under the impression it is a hardware failure as no rom (mb6.5, WP7 or CWM) will boot and magldr installed fine but wasn't able to restart the phone.
Check your battery pins to see if they're in anyway bent. If they are, just push them back a little bit with your finger.
Have you tried Task29? I think the only other way would be to flash stock again and start over.
Sent from my HTC Vision using XDA App
Skellyyy said:
Check your battery pins to see if they're in anyway bent. If they are, just push them back a little bit with your finger.
Have you tried Task29? I think the only other way would be to flash stock again and start over.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Yes, I have tried Task29 and then tried installing both magldr then CWM and wm6.5. It however didn't make a different as I still got the same error. Sorry, I forgot to mention this in initial post.
I have also read about the battery pins being bent. I haven't tried it but from what I can see mine are all about the same height and seem pretty straight. When I put in the battery they also seem to be pushed back a bit so I am assuming they are all making contact. I was a bit worried about over extending them but I might give it go if no other option becomes available.
I've seen several times people with a phone that seems to flash, but nothing actually changes.
The only way you can visually test this in your current state is to change spl to something different, and look in bootloader see if it changed, but you said you don't wanna, so.
You can try flashing HSPL 4 and select HSPL 3.03 and see if gbiz is sucessful. If you have HSPL 3.03 in bootloader then you know it is flashing and you can go back to HSPL 2.08. Also you can try flashing your stock Telstra ROM via USB cable and computer as this method will not change your HSPL 2.08 but flashing it via SD card will revert you back to SPL. I think flashing the stock ROM will be your best bet for now.
Well I originally had the energy boot screen and when I flashed to a copy of the chunky rom it changed to its one. I would have thought it was at least partly flashing. Also I have removed with magldr with task29 then reflashed (with magldr) and was able to boot into magldr. So I think the flashing is happening successfully.
I you think reflashing the HSPL could work then I'll give that a try. As I haven't done that yet. If that doesn't work I'll take a look at flashing the Telstra ROM. I know flashing a stock rom is mentioned as a solution but I wasn't sure why I would make the phone work any better than a custom rom with concerns to booting.
Thank you for your suggestions.
Just to cover all bases here, your HD2 is not getting really warm or warmer than usual is it? If so this is a sign of thermal breakdown, but like I said this is just to cover all bases here.
From what I can tell it hasn't been getting any hotter than usual.
Re:"why to use stock instead of custom"
Its because a stock rom flashes everything, spl, splashscreen, radio and rom.
Also, some customs use a secondary splashscreen, which would replace magldr, so if things aren't right, starting over by flashing your correct rom is often advised just to draw a line under the current attempts and start over.
Don't forget that even if the stock flash fails, if you did it from bootloader then Hspl is likely gone, and magldr too, possibly.
Just an update. I flash a Telstra ROM which to my surprise it booted... after a couple of tries. Decided to reboot it to see if it starting up was just luck which it turns out it was. I couldn't get it to start again then it refused to even get into the bootloader. So I am sure enough now that it is a hardware failure and am taking it in for warranty.
Thanks again for the help.
I'm sorry i know it's against the rules to be starting a new thread but it's been a week i've been asking for help and no one noticed. This is just a try to come noticed.
I installed task 29 on my blackstone. I had olinex 1.56 installed and later did the task29 with radio 1.13, 1.14 and 1.17 After successfully doing it i went on step 2 that is installing a clean rom. I tried these roms
blackSTONEhengeHyPerSlim_4_1
RUU_TOUCH_HD_MARYONE_23148_WWE_191110
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship(3)
They get installed but after i store the contacts and everything it gets stuck if kept for like half an hr. The screen doesn't respond but power button and the volume button works.
I took my phone to a repair center and they couldn't fix it. So please help me i've just got only one phone.
I don't mean to offend any moderators by this but i'm just asking for your help. Thank You
Try reinstalling stock ROM after Task 29.
Restore ONLY contacts, and then try using device for several days.
DO NOT install any other software!!!
If it works, then problem is in some data or software you're restoring.
If not, restore original SPL and original ROM and try again.
If it does not work... and service can not help you... then sorry...
Hello i did reinstall the stock rom after task 29 and i was using pimbackup for restoring but that freezed my phone so i installed the stock rom again and thought of not using it. Did that but nothing much helped.
I hope believe these are the correct shipped roms
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship(3)
Everything on xda has worked like wonders for me. Be it android on any other rom but right after task29 nothing seems to be working on my phone.
One thing i've noticed after installing any rom after task29 is if i get to the bootloader it gets me to a 1 sec white screen saying no image found. I hope what's causing a problem.
Do you understand WHAT Task 29 is?
It formats the partition drive of your device where the ROM resides. Meaning, it wipes any data regarding ROM.
So of course it would say "No image found".
I don't know which ROM is stock for your device. Try to update ROM via HTC site.
If lucky, it will suggest / let you find adequate ROM.
For my device it's 1.56.407.2 (German)!
If unlucky, it will say "Not supported" or something like that - then go for Orange 1.59.61.2 ROM.
And you might try one 1.5x ROM flash WITHOUT Task 29...
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Thanks will do it and keep yu updated with it..
simplistian said:
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Click to expand...
Click to collapse
Thanks i tried installing the stock rom like you told me but then got stuck on the screen alignment screen. I later installed blackSTONEhengeHyPerSlim_4_1 and now it's responding to every touch. Thanks alot. I hope this stays like this and yes instead of restoring i forwarded all the contacts through bluetooth. Owe you a BiiiiiiiiiiiiG thanks..
Too soon to be happy as same again..I don't think there should be a problem with touch as it works fine for first 1hr but right after something gets stored by something i mean contacts it stops reponding after sometime. The volume and power button work all fine. I can't make out the problem. Any ideas or suggestions. Shall i make a video and post ??
FIRST you have to make it work with factory settings - stock SPL and stock ROM.
After that flash what you like...
I think you have to follow Bodisson's suggestion, do everything as stock and retest without restoring anything. If it still failed...... you should have it repaired
Good luck!!
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Bodisson said:
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Click to expand...
Click to collapse
Glad to see somebody researching things out and settling on a radio he prefers due to performance rather than those just going for latest
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
kulwant said:
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
Click to expand...
Click to collapse
All rom's should work with each radio to be honest. Glad your device is working better, though still a little baffled why you're still having difficulties
EDIT - You are on a wm6.1 rom. Is the rom based on 1.56+, if not you may need to revert to HSPL 1.14
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
kulwant said:
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
Click to expand...
Click to collapse
I'm baffled but still want to get to the bottom of your issue and would appreciate any help from other members who may have idea's on how to solve your issue. From what I've read everything you have done is correct, but I don't like being stumped!!
If we start from the start, we may get to the bottom of this........
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
kulwant said:
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
Click to expand...
Click to collapse
Well as you know a T29 formats device so you need to flash a rom or you'll be stuck at boot screen. Before you do a T29 it states you must have HSPL on your device first. Now from what I've read you did have HSPL on first and your T29 worked as you where stuck at boot screen afterwards.
I'm assuming you turned device off, booted into bootloader then flashed youir rom (blackSTONEhengeHyPerSlim_4_1) which is based on 1.56+ as was your HSPL.
This all seems correct so I'm not sure what went wrong.
Is above all correct?
Did you try a T29 again and flash different rom or did you just flash different rom over existing?
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
kulwant said:
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
Click to expand...
Click to collapse
Right, I never put any files in same folder as it only confuses flashing process and can cause issues. I.e. put T29 in its own folder, radio 1.14 in its own folder and then rom in another folder.
Do a T29 and when its complete, I.e. stuck in smart mobility screen. Then you take out battery to turn phone off. After this put phone into bootloader and flash rom. Then flash radio after it as a lot of roms have a radio file included
...........................
Sent from the improved version of Tapatalk, better known as Forum Runner
Hi Guyz,
few weeks back my htc hd2 T-Mobile US lcd borke. I replaced the lcd but froyo stopped working. I was using boot from sd card version. I tried installing gingerbread NAND version but after flashing from USB phone reboot and stuck at go go go screen. I used following steps:
task 29
installed 2.15 ROM
2.08 HSPL
magldr 1.13
USB flash using DAF.exe
after reboot it stuck.
i googled this problem and found some solution but none of them work for me thats why i posted here. please help me if im doing something wrong here or should i do some other method to install gingerbread on my phone.
any help will be highly appreciated.
Thnx
anyone ???
Hey what up, have you tried the HD2 toolkit in the HD2 NAND Thread? I used it before it's pretty koo. I switched to clk months ago so I'm totally lost on MAG, maybe check your partion layout? What ROM are you using?
hi cordaylec
thnx for reply.
i used 2.15 version. few days ago i used same steps to install NexusHD2 gingerbread successfully on my friends hd2. Dont know why its not working this time on mine.
Haven't tried toolkit. i'll give it a try and let you know what happened.
I've installed toolkit but no idea how to use it. can you plz guide me a bit. thnx
guyz im still stuck...
The thread has all the instructions just follow step by step and make sure your partion layout is correct for the ROM your using
Sent from my HTC HD2 using Tapatalk
Or try clk?
Sent from my HTC HD2 using Tapatalk
made sure you got the correct radio ?
which radio should i use. i flashed 2.15 ROM but it doesn't slove the problem. I have US T-Mobile.
Now when your saying 2.15 ROM do you mean the radio?
sorry for being not clear.
i've ROM verion 3.14 and Radio verion 2.15
Are the last 2 digets .50 or .51 of the radio? 2.15.50?
this is the complete Radio version 2.15.50.14
Try clk, I haven't looked back since. Or have you tried other roms?
i tried clk too. it got stuck when i Run fastboot_install_recovery.bat to flash ClockworkMod Recovery 3.2.0.0.
I tried couple of ROMS RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship but still got stuck after usb flash reboot.
im very frustrated its been two days my phone is completely dead.
or maybe you are flashing, because you got freezing issues because of heat in the cpu or mainboard?
i had those go go go when the phone is hot. wait 30min ant it goes
have tryed clk, that one was more stable for my hardware issued hd2.
i tried installing this last night but couldn't successed. phone was off today full day then i started trying again tonight..
i tried every possible way of installing android but still no success....
so i had those go go after android was installed from sd card.
then i removed sd card, witch feels for me causing trouble. And those go go became just randomly. depending on heat..
So you good to go?
Hello..a friend of mine gave me a HD2 to fix, said it can't load anything. As I own a HD2, I took it just to see what's wrong. I own an Asian HD2, and everything is fine, I tried various ROMs..both Android and WinPhone, settled at Hyperdroid. Anyway, I have no idea where the heck the other HD2 is from, neither my friend has.
So, the phone had nothing in it and was stuck at the HTC logo, so I loaded into bootloader and saw HSPL 3.03. Then I changed it to 2.08 in order to install MIUI android. Then I installed MAGLDR. The issue occured when I went to install CWM. I loaded the 150M partition at USB Flasher, it was doing all fine until it became stuck at "reset now...!". So I just took the battery off, and tried to load into AD recovery. While it loads to 1, then it shows "fatal hit" error. I tried a lot of times including task 29, but it persists. Was the phone bricked from earlier ? Something like heating issues I assume. Anyway, I tried to install my phones stock WinMo rom to it from SD but it also gives error like failed, not allow etc. The both phone looks the same, under the battery hood of my phone, it's written HTC HD2 T5858. On the other one, nothing. Rest visuals are same.
So is there any way I can bring this anonymous HD2 to life ? I think it's almost dead but still if there's any way you people can come up with. I'm using a 2GB Sandisk MicroSD and the phone's S/N is HT01CNW04979 ; if that helps to sort out the phone's identity. Your help is much appreciated. Thanks
http://forum.xda-developers.com/showthread.php?t=1520439
this is a thread I created 3 days ago....me, another user, and now you...
our hd2s are going to diee D: stop joking, I (and toher guys) think that is hardware related....like in my case....but I don't really know what's the problem, just guessing....take a look to my post
True that. Only the difference is, it's happening to me during clockwork recovery installation. And I don't know where the heck is the phone from so that I can load custom WinMo lol. My own HD2 is doing just fine by the way.
http://imageshack.us/photo/my-images/263/87604378.jpg/
http://imageshack.us/photo/my-images/412/59177201.jpg/