Related
Okay First of all download the following files
a)http://android.clients.google.com/packages/ota/google_crespo/VQ8PQk_V.zip (4.0.3 OTA)
b)http://android.clients.google.com/p...a25375426.signed-soju-ota-189904.1ada2537.zip (2.3.6 Official I9020T Build)
c)http://bit.ly/su2361ef (SU flashable)
d)http://forum.xda-developers.com/showthread.php?t=988686 (Grab recovery form this thread)
e)http://developer.android.com/sdk/index.html (Grab the android SDK installer)
f)http://attachments.xda-developers.com/attachment.php?attachmentid=687157&d=1313224429 (Radio file only required for I9020A)
Okay so when done with all that proceed as follows
1) Backup your current apps using Titanium Backup (Optional/Recommended)
2) Backup(Nandroid) your rom using backup option in CWM (Optional/Recommended)
3) Do a full wipe, wipe sdcard, system, data, cache Transfer a,b,c,f to your phone.
4) Flash the 2.3.6 Official I9020T Build you had downloaded using the install zip option in CWM (IMP-DO NOT REBOOT RIGHT NOW)
5) Flash the flashable SU file you had downloaded and then reboot.
6) Once your phone is on, continue to set up your account or skip it as you wish. (Optional)
7) Open up market, download the latest SU app, Voodoo OTARootKeeper, Titanium Backup and any other app you use that requires root.
8) Open the updated SU app, hit menu button and click preferences, go all the way down, click on su binary(tap to check for updates) , and make sure it updates to v3.0.3
9) After that is done, open and allow root permissions to all your root apps. (This is important)
9.5) Run Voodoo OTARootKeeper and click on protect root, make sure all options get checked.
10) Turn off phone, keep volume up and power pressed to boot into fastboot.
11) Select recovery with volume buttons and use power to launch.
12) Once you see a android bot image and an arrow image, keep volume up pressed and press power once, then you'll see some options appear.
13) Select apply update option and find the official 4.0.3 OTA file you had downloaded and flash. Reboot.
14) Once you have booted into ICS, go to Voodoo OTARootKeeper and select resture Root, all options should now be ticked, if not something went wrong.
15) Voila, you have root. Now to get back CWM recovery you can follow this -
i) Place the recovery img file in the android sdk platform-tools folder
ii) Switch to the directory where you unzipped the Android SDK & go to "tools"
iii) Then type "fastboot flash recovery yourfilename.img" & hit enter
iv) That should do it.
v) Optionally you may do it form Rom Manager too, if it works.
16) (ONLY FOR I9020A) Reboot phone, turn it off, boot into fastboot, select recovery, CWM should launch, flash the radio file you had downloaded to get radio working on I9020A (ONLY FOR I9020A)
Root only works for the apps that were installed while on 2.3.6
http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip , use this root file, flash it in cwm, everything works, permissions etc.
This might work for other variants, tested on I9020A and I9020T, I take no responsibility for anything that might go wrong with your device. I take no credit for any links or procedures provided in this guide, I just tested and compiled.
Thanks and best of luck.
..........
Good guide but first two links are broken.
bajansurfer said:
Good guide but first two links are broken.
Click to expand...
Click to collapse
Thanks, fixed.
Do I really need to flash official 2.3.6 before ICS? what if I wipe and format then install 4.0 immediately?
poging22 said:
Do I really need to flash official 2.3.6 before ICS? what if I wipe and format then install 4.0 immediately?
Click to expand...
Click to collapse
Might not work, though you can try, if it fails, do it my way, also its impossible to get any kind of root that way.
Link for the ATT Radio doesnt seem to be working
Great work!
wipe SD card?
Is this necessary?
I don't think it's necessary to wipe the SD card, I followed the procedure in http://forum.xda-developers.com/showthread.php?t=1396913 and although it said my SD card would be wiped, everything was still there after I was done!
Anyone on a i9023 tried this?
Hmm...does "any version" includes M200(Korean Nexus S)?
Sent from my Nexus S using Tapatalk
http://attachments.xda-developers.com/attachment.php?attachmentid=687157&d=1313224429
I think he meant that for the 9020A radio
Link fixed, sorry for that, SD wiping might not be necessary, but I suggest as it makes it cleaner. Might work for I9023 and M200, I have no clue, maybe some experienced developer can answer that better.
Not to crap on a great tutorial, This is exactly what I would be looking for if I were not already set up and running. Last night was a dizzying whirlwind of flashing, high heart rates and finally becoming familiar with fastboot and flashing things like that.....lol
But in the end I simply found a cwm flashable zip without radio or bootloader and installed through cwm like any other rom. As far as root all I did was flash a zip file found on the forums and I was good to go.
Hi mine keeps hanging in the boot animation and can't get into recovery, what else can i do? Is my phone bricked?
little hiccup at step 12. im getting the android bot with exclamation mark but i press volume up with power and nothing happens. menu doesnt show up....
Edit: NVM... i pressed it 3 or 4 times and it finally worked
Michie23 said:
Hi mine keeps hanging in the boot animation and can't get into recovery, what else can i do? Is my phone bricked?
Click to expand...
Click to collapse
You should post it in questions, I cannot answer this.
fromthestars said:
Not to crap on a great tutorial, This is exactly what I would be looking for if I were not already set up and running. Last night was a dizzying whirlwind of flashing, high heart rates and finally becoming familiar with fastboot and flashing things like that.....lol
But in the end I simply found a cwm flashable zip without radio or bootloader and installed through cwm like any other rom. As far as root all I did was flash a zip file found on the forums and I was good to go.
Click to expand...
Click to collapse
Many ways of doing it, I just am suggesting one, the flashable zip for ics isn't available as yet, what did you flash?
i9020 keeps getting status 7 aborted and my padlock is still unlocked on t-mobile 2.3.6
Has any tried this on an i9023? Thank u
Sent from my Nexus S using xda premium
1. Place the superuser.zip file attached at the end of the post on your sd card.
2. Flash recovery in bootloader with "fastboot flash recovery <filename>.img". I recommend CWM 5.0.2.3 found in this thread - http://forum.xda-developers.com/showthread.php?t=988686&highlight=recovery
3. Go to recovery, in "mounts and storage" select "mount system" and then flash su-install.zip (EDIT : Mounting system not necessary, the script does it automatically while flashing the zip, but just in case)
4. Fix Permissions and reboot system.
5. Use any root explorer (i recommend ROM Toolbox, free in market) and go to /etc and either rename "installrecovery.sh" to "installrecovery.sh.old" or just delete it (its not needed).
6. There it is - Rooted ICS with a recovery that sticks.
EDIT -- IF, by any chance, after following the above steps, you find that you're stuck without a recovery (android exclamation screen), just flash a recovery via fastboot and you'll be fine. This time the recovery WILL stick. I think its something to do with the su-install.zip. I dont know for sure because I found it off the internet, its not mine.
Also, I did the superuser market update and I DID NOT lose root. I have an I9020T. So others with the same can safely update, imo.
Thanks to ab.grafix for being a part of the team.
IMPORTANT -- The su-install.zip posted previously is NOT mine. I didnt know who made it but just found out. All credit to dzo binary and Chamb'. I just made a guide coz it worked for me and I thought it might help others too.
Tested on I9020T and I9023
Don't forget to click on that thanks button if this helped.
UPDATE -- Superuser was updated by ChainsDD to support ICS 4.0.3. Thank you ChainsDD! Updated zip is now attached.
So now that we have root we need a overclocked kernel...
Sent from my Nexus S using XDA App
works great but very old cwm
Worked as described. Thanks !
Old cwm? Wich version? Is it possible to flash the latest one with rom manager?
So I am on ICS alpha13.
I9023
- wipe everything and Flash Android 2.3.6/GRK39F/XXKF1 Radio/KA3 Bootloader via clockworkmod
- Reboot in stock recovery and flash stock ICS
- Boot in ICS enable debug mode
- Run the bat follow instruction?
Is it ok?
Thanks
Hi will it work on the rogers i9023a? Can someone tell me which stock ICS to flash?
Thanks
Thanks, it worked and nothing was wiped since I was already unlocked. With apps that require root you no longer get asked for root permission nor do they show in app list in superuser but it seems to have root for now
For the guys using linux (like me ) , just download the archive in the first post , retrieve from there 2 files: root.zip and recovery.img and use them with your current ADB setup.
HOW-TO:
Prerequisites: you have installed Android SDK, fastboot and you have set-up correctly the udev (ubuntu).
1. Place the above mentioned 2 files in the working directory
2. reboot in bootloader mode (vol-up + power)
3. connect USB cable
4. run "./fastboot-linux-i386 flash recovery recovery.img"
5. reboot bootloader
6. reboot recovery
7. mounts and storage -> usb mass storage
8. copy root.zip in the phone storage
9. go back -> install zip from sd card -> root.zip
DONE !
I just tested and is working fine.
If there are newbies out there trying to understand the nonsense I wrote, try following the rooting guide for Gingerbread and just use the 2 files I mentioned in this post instead of the ones in the archive for gingerbread.
when in BL i dont have Unlock option :|
Thanks for your effort.
But I'm curious about the flashable zip file.
What's the difference of the zip file between the orignal superuser ?
And did the recovery do some magic which CWM can't do?
After reading the script , I just see the zip is important ,maybe the recovery is doing some magic too.
I'll just flash the zip and see what happen.
ro_explorer said:
For the guys using linux (like me ) , just download the archive in the first post , retrieve from there 2 files: root.zip and recovery.img and use them with your current ADB setup.
HOW-TO:
Prerequisites: you have installed Android SDK, fastboot and you have set-up correctly the udev (ubuntu).
1. Place the above mentioned 2 files in the working directory
2. reboot in bootloader mode (vol-up + power)
3. connect USB cable
4. run "./fastboot-linux-i386 flash recovery recovery.img"
5. reboot bootloader
6. reboot recovery
7. mounts and storage -> usb mass storage
8. copy root.zip in the phone storage
9. go back -> install zip from sd card -> root.zip
DONE !
I just tested and is working fine.
If there are newbies out there trying to understand the nonsense I wrote, try following the rooting guide for Gingerbread and just use the 2 files I mentioned in this post instead of the ones in the archive for gingerbread.
Click to expand...
Click to collapse
In fact, you can use any recovery image you want, including the latest clockwork for example. I used TWRP to do this and it worked just fine. On linux, just flashed root.zip.
I've done it, thanks a lot. I've also replaced the recovery.img file with the last cmw and all went well.
Now the rom doesn't show the root permission request toast but it works however.
I'd ask if its possible to manually update the superuser.apk or its better to mantain this one?
sakisds said:
In fact, you can use any recovery image you want, including the latest clockwork for example. I used TWRP to do this and it worked just fine. On linux, just flashed root.zip.
Click to expand...
Click to collapse
Great .. I'll do that because I miss my "old" cwm
EDIT: it worked, thanks!
thanks, working here on 9023. warning for other users - do not update superuser from the app itself, or it'll stop working. at least it did for me, when i updated it to 3.0.3
confirmed working I9020a...
[INFO] Working root for ICS 4.0.3
Credits to Chamb'.
Flash via CWM and you're done.
Tested working for ICS 4.0.3 I9020T.
Enjoy!
Source: http://forum.xda-developers.com/showpost.php?p=20394635&postcount=4
It seems to have worked like a charm, thank you!
I was even able to flash the latest CWM Recovery using ROM Manager
can I flash stock 2.3.6 with cwm?
Im on ics alpha13
Anyone got a download link for the stock 2.3.6?
bratfink said:
Anyone got a download link for the stock 2.3.6?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1063664
Ok so I am in the process of doing this myself. I'm kind of doing this off my own back as I cannot get the AIO tools etc. to work, but there is a nice way of gaining root on 4.1.2. This is on a UK bought Xoom, but it is a MZ604 that has been added to the Google Experience Device program.
Disclaimer: This should be obvious by now in these threads, but I, nor anyone else who's work is involved in this are NOT responsible for anything that happens to your Xoom. By following this guide you are accepting this as fact. All that being said, good luck!
So, assuming you have an unlocked bootloader and with your xoom connected to a PC running Windows do the following:
1) Download the root zip attached (thanks to matt4321 for sharing solarnz zip in the original thread: http://forum.xda-developers.com/showthread.php?t=1965330 )
2) Download the latest version with install scripts from here and extract the windows file to your desktop: http://forum.xda-developers.com/showthread.php?t=1782235 (I'm assuming you can use any recovery image with the installer, however with this at least its all in one and ready to go. I used 2.3.2.3)
3) Put the "Xoom-Universal-Root_modded_4_JB.zip" onto the external SD Card (MAKE SURE IT IS A .ZIP, do NOT extract)
4) Run the RUNME file inside the windows folder on your desktop
5) Use option 2 to boot into fastboot
6) Once fastboot is loaded use option 1 in the prompt
7) This will then install the recovery.
8) Power + volume up to reboot
9) Do not let the device boot into android, it will get rid of the new recovery menu, hold power (on the Motorola dual core splash) and get the device to turn off before android starts loading.
10) Once the Xoom is off, start it again, pressing the volume down key rapidly until you see some options at the top, select recovery, press volume up.
11) Welcome to your new recovery! So, we need to install the root update. So select install zip.
12) Choose the root zip, go through the options and install it.
13) Reboot your device
14) Check for SuperSU
Congratulations, you should now have root on your 4.1.2 GED'ed Xoom MZ604.
Hope this helps someone, as I've been stuck doing this for a few hours now and just figured it out by reading countless threads about this.
Worked for me after I sorted out the Motorola drivers on my PC so that the adb driver worked properly.
Good work
Sent from my Xoom using Tapatalk 2
How do i know what the model number is? I just checked and it just said xoom this is the few threads i saw where they said it worked
Sent from my T1 using xda app-developers app
us mz604
Will this work on a us mz604
If you plan to flash custom rom there is no need to root your xoom
Just unlock bootloader
Flash cwm or twrp
Flash your favorite rom
Tada you will have awesome rooted xoom
Thank you, that is a nice and easy guide.
nevermind, found it.
How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais
How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis
I got the same tablet and I also am looking for a root. :/
Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse
Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse
thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se
Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted
Rooting VK810 official stock release 11A (11A is chosen for two reasons: 1. because it's easiest to root with the Stump app and 2. because on anything newer than 11A, you'd have to manually downgrade the bootloader before being able to install TWRP the first time):
1. On the tablet, download the Stump app from http://forum.xda-developers.com/lg-g3/orig-development/root-stump-root-lg-g3-sprint-verizon-t2850906
Credit and thanks @jcase, IOMonster , @autoprime and @PlayfulGod. Credit and thanks azureflux for the music although personally I turn the volume down all the way.
2. Install the Stump app you downloaded. Android should prompt you that it's an app from an unknown source since you didn't download it from the Play Store. It should direct you to the Security Settings option "Unknown sources" which you should checkmark and then attempt again to install the Stump app.
3. Launch the Stump app.
4. Turn the volume all the way down if you want because the music can be annoying for the duration necessary to root the VK810.
5. Choose "Grind".
6. Choose "Brute Force".
7. On the VK810, it can take up to 20 minutes at which time the Stump app should say to reboot the device to implement the root.
8. Once the device is rebooted, go to the Play Store and install SuperSU from https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en
Alternatively you can download the latest non-beta SuperSU zip from http://download.chainfire.eu/supersu (XDA thread with this link at http://forum.xda-developers.com/showthread.php?t=1538053), extract the zip and install the SuperSU app, or the latest Beta version from a link in @Chainfire 's thread at http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133.
You'll also need this SuperSU.zip for step 8 of the fourth post "Flash to the latest stock ROM so that you can have it with root".
Credit and much thanks to @Chainfire !!!
9. Launch SuperSU, confirm the prompt to update binaries.
Installing the initial (necessary) TWRP v2.7.0.1 and updating it to the latest TWRP v2.8.7.0:
http://forum.xda-developers.com/showpost.php?p=64577888&postcount=3
Installing the initial (necessary) TWRP v2.7.0.1 and updating it to the latest TWRP v2.8.7.0:
1. On the tablet, download the "VK810_twrp_2.7.0.1.zip" from http://forum.xda-developers.com/showthread.php?t=2726707
Credit and thanks teamwin , @Drgravy , @djrbliss , @Dees_Troy , @id10terror and @traccdma !
The link is in the "DOWNLOAD" section below the "DISCLAIMER" towards the bottom of the first post.
Credit @Drgravy for the original instructions but I prefer to run the commands directly on the device instead of from a PC via USB Cable and ADB.
2. Download TWRP v2.8.7.0 from http://forum.xda-developers.com/lg-g-pad-83/orig-development/recovery-twrp-2-8-7-0-t3150812
Credit and thanks @AndroidUser00110001 !
3. Install "X-plore File Manager" from the Play Store at https://play.google.com/store/apps/details?id=com.lonelycatgames.Xplore&hl=en
Credit and thanks Lonely Cat Games!
4. While you're in the Play Store, install "Terminal Emulator for Android" https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en
5. Launch X-plore.
6. Enable root mode in X-plore:
6A. Click the three-dot menu button in X-plore's upper right corner.
6B. Choose "Configuration".
6C. In the "Root access" section, click the gray area below it and choose "Superuser + mount writable".
6D. Give X-plore SuperUser permissions by choosing "Grant" in the SuperSU prompt that pops up. It might not open this prompt until a later step when you actually access root.
7. Find the "VK810_twrp_2.7.0.1.zip" file you downloaded in step 1 above. It should be on your internal storage in the Download folder.
8. Click once on the zip file - this will show you the files contained in it.
9. Navigate to the other file manager pane by choosing "SWITCH PANE" in the upper right corner.
10. Choose "Internal storage".
11. Navigate to the original pane by choosing "SWITCH PANE" again.
12. Select all the files inside the zip.
13. Choose the "Copy" icon in the toolbar on the right or left side of the screen. Choose "OK" at the confirmation prompt.
14. Now navigate to root. Give X-plore SuperUser permissions by choosing "Grant" in the SuperSU prompt that pops up.
15. From root, navigate to data/local/tmp.
16. "SWITCH PANE" to where you extracted the files from the zip.
17. Select "loki_flash" and "twrp.lok".
18. Choose the "Copy" icon in the toolbar on the right or left side of the screen. Choose "OK" at the confirmation prompt.
19. Launch "Terminal Emulator" installed in step 4 above.
20. In Terminal Emulator type (make sure no typos, or can copy/paste to be sure):
Code:
su
cd /data/local/tmp
chmod 777 loki_flash
./loki_flash recovery /data/local/tmp/twrp.lok
reboot recovery
Instead of "reboot recovery" you can use an app such as "Quick Reboot" from the Play Store at https://play.google.com/store/apps/details?id=phongit.quickreboot to reboot to recovery.
21. For getting to custom recovery with the tablet off, press and hold the Down Volume button. While continuing to hold the Down Volume button, press and hold the Power Button. The screen should come on in the stock-looking recovery and you can let go of both buttons). "Factory Reset" will no longer perform a Factory Reset. That's what you choose to get into custom recovery.
22. Update to to the latest TWRP v2.8.7.0 that you downloaded in step 2 above by (in TWRP v2.7.0.1) choosing "Install", navigating to where you downloaded the TWRP v2.8.7.0 zip (probably in internal storage in the Download folder), and choosing to flash the zip.
You can put a different custom recovery on the same way.
23. You can reboot into the newer TWRP by choosing the reboot recovery option.
Flash to the latest stock ROM so that you can have it with root:
http://forum.xda-developers.com/showpost.php?p=64601845&postcount=4
Flash to the latest stock ROM so that you can have it with root:
1. Download my ROM from my signature at the bottom of this post. I use ADM "Advanced Download Manager" from the Play Store at https://play.google.com/store/apps/details?id=com.dv.adm&hl=en, especially for downloading larger files like ROMs.
2. Check the MD5 Hash of the ROM zip:
2A. Copy (to the clipboard) the MD5 hash that I have in the filename of the ROM zip you downloaded in step 1 above.
2B. Install @scary alien 's "AFV File Verifier for Android" from the Play Store at https://play.google.com/store/apps/details?id=sa.afvx&hl=en.
2C. Run the AFV app.
2D. Choose "Input checksum for comparison".
2E. Paste the MD5 hash previously copied to the clipboard in step 2A above.
2F. Choose "Select File".
2G. Navigate to where you have the ROM zip.
2H. Long-press on the ROM zip and choose "Calc MD5 Checksum".
2I. When it's done calculating the MD5 hash of the ROM zip, it'll automatically compare it to the MD5 hash you pasted in step 2E above.
If the hashes match, the downloaded ROM zip is non-corrupt. If the hashes don't match, you have to re-download the ROM zip.
3. Optionally download one or more of my debloat zip files in the third post of my ROM thread in my signature below. If you don't flash my "no OTA" debloat zip, then don't take any OTAs you get offered if there are ever any more, or you might get soft bricked, which I won't go into recovering from here.
4. If you didn't already do so in step 8 of the second post "Rooting VK810 official stock release 11A", download the latest non-beta SuperSU zip from http://download.chainfire.eu/supersu (XDA thread with this link at http://forum.xda-developers.com/showthread.php?t=1538053) or the latest Beta version from a link in @Chainfire 's thread at http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133.
5. Copy/move anything you want to keep from internal storage like the files you downloaded in the previous sections.
6. I strongly suggest wiping everything from TWRP (Data, Cache, System, Dalvik and Internal Storage). Wiping all of these things, especially if you use my debloat zip(s) will clear up garbage/folders that were left behind by previous bloat.
7. Flash my ROM.
8. Flash SuperSU.zip (downloaded in step 4 above). This step is VERY IMPORTANT if you want to get back into custom recovery without having to re-flash a stock ROM and go through the whole process again.
9. Optionally flash one or more of my debloat zip files. If you don't flash my "no OTA" debloat zip, then don't take any OTAs you get offered if there are ever any more, or you might get soft bricked, which I won't go into recovering from here.
Flashing the debloat zip(s) before the first boot of the ROM will give the advantage of never having the data/cache entries or internal storage folders for the debloated apps created, the latter is why I recommend a wipe of internal storage.
In order to get back into TWRP/custom recovery from rooted Lollipop or above ROMs:
http://forum.xda-developers.com/showpost.php?p=64601845&postcount=5
Thanks to @JBurch/cry for the monetary motivation to finally put this all together in one place!
There are THREE variants of the G Pad 8.3: The Verizon VK810.4G which has LTE, and the V500 and V510 WIFI-only models. These instructions are ONLY for the VK810.4G.
Please don't quote the whole OP.
FAQ: If you use files meant for anything else other than the VK810, you'll brick your tablet. This will be exhibited by the tablet showing up in Windows' Device Manager under "Other devices" as "QHSUSB-BULK". You will have to Google for "QHSUSB-BULK" to find out how to fix that. I've read about some having success doing so and others not. I haven't ever had to fix that so I have no personal experience with it and can only lead you to Google about it.
This requires a Windows PC, preferably Windows 7 or newer, to first downgrade your VK810 variant of the G Pad 8.3 to LG build 11A / Jellybean 4.4.2, to make it easiest to root and to put a custom recovery on.
Disclaimer: I am not responsible for whatever you do to your device. This is my preferred method and what I recommend.
Note: These instructions are still working in order to downgrade from official stock release 36B on the VK810 (codename "altev"), Verizon LG G Pad 8.3 LTE, to official stock release 11A in order to make it easiest to both root and install TWRP. You can then install any ROM you like including my newest stock ROM in my signature at the bottom of this post.
Downgrading/resetting to 100% official stock unrooted release 11A (11A is chosen for two reasons: 1. because it's easiest to root with the Stump app and 2. because on anything newer than 11A, you'd have to manually downgrade the bootloader before being able to install TWRP the first time):
1. On a Windows PC, preferably with Windows 7 or higher, download the latest Verizon-LG driver at http://www.lg.com/us/support-mobile/lg-LGVK810 (current version 4.0.3, direct download link if still working http://18d5a.wpc.azureedge.net/8018D5A/tool/dn/downloader.dev?fileKey=UW00520120427).
2. Install the driver.
3. Reboot the PC.
4. While you're continuing to follow the rest of the directions, might as well get the installed driver "loaded":
4A. Put the VK810 in Download mode:
4A1. Preferably using the original USB cable, or alternatively possibly a high-quality cable, connect the one end preferably to a USB 2.0 port on your Windows PC. Note: not all, but most USB 3.0 ports (to avoid for this process under normal circumstances) are blue in color whereas USB 2.0 ports are usually black.
4A2. Turn the VK810 off (within Android, long press the power button and choose "Power off").
4A3. The following is different from other G Pad 8.3 variants:
4A3a. Press and hold the Up Volume button.
4A3b. While continuing to hold it, insert the tablet end of the USB cable.
4A3c. You should feel the tablet vibrate and you can see a very dim, very faint graphic in the very center of the screen that says "Download Mode":
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit and thanks @sevoan for posting the screenshot at http://forum.xda-developers.com/showthread.php?t=2782066
4A3d. Let go of the Up Volume button.
4B. Windows may take up to 10 minutes to finish loading the driver you previously installed. Every time you connect any USB device to a new/different USB port on a PC, Windows will have to take a longer loading the driver process.
5. Download the official stock release 11A KDZ for the VK810: https://www.androidfilehost.com/?fid=23991606952610809 (file name "5. VK81011A_01 - Jellybean 4.2.2.KDZ - MD5 hash inside - recommended for both ease of rooting and one less step to install the initial TWRP v2.7.0.1.7z")
If the previous link doesn't work, you can find it in my signature at the bottom of this post.
6. Download and install the free 7-Zip Windows program from ttp://www.7-zip.org"]http://www.7-zip.org[/URL]. Any version should work although you can only install the 64-bit version on 64-bit versions of Windows.
7. Use 7-Zip to extract the KDZ from the 7-Zip (7z) file downloaded in step 5 above. If you want to extract the 7-Zip on an Android device instead for some reason, use ZArchiver from the Play Store at https://play.google.com/store/apps/details?id=ru.zdevs.zarchiver&hl=en
8. LG Flash Tool 2014:
8A. On the Windows PC, download "LG Flash Tool 2014" from http://forum.xda-developers.com/showthread.php?t=2797190
Credit and thanks @quangnhut123
The MediaFire link is in step "3. Tutorial"
8B. Run "LGFlashTool2014.exe" as Admin: Right-click on "LGFlashTool2014.exe" and choose "Run as administrator". Provide Administrator credentials if necessary. If you get a UAC (User Account Control) prompt, click "Yes".
8C. If the program doesn't run, install the Visual C++ Runtime Library, also available in step "3. Tutorial" at the link in step 8 above, then repeat step 9.
8D. Screenshots also available at the link in step 8.
8E. "Select Type" should already be at the correct default "CDMA". Same for "PhoneMode" is "DIAG" and "Reset time" is "33000".
8F. Click the yellow folder icon to the right of the "Select KDZ file" field and choose the 11A KDZ file extracted from the 7-Zip archive you downloaded in step 5 above.
For reference: "CSE Flash" is what you should normally always use. "CSE Flash" will wipe your user data including your internal storage so be sure to move/copy anything you want to keep that's currently on your internal storage. "Normal Flash" is like a dirty flash. Your device will be restored completely to stock but will keep all of your user data including your internal storage. If you're downgrading stock ROM versions, you can expect "Normal" to result in a device that'll crash. If you do so, you can attempt a "Factory Reset" from the stock recovery (with the device off - long press the power button for 10 or so seconds until the device shuts off - press and hold the Down Volume button. While continuing to hold the Down Volume button, press and hold the Power Button. The screen should come on in the stock recovery and you can let go of both buttons). "Factory Reset" will of course wipe all user data including Internal Storage.
8G. Click "CSE Flash".
8H. On the "Read Phone Information" dialog which appears, do NOT press the "Read Phone Information" button. This has always crashed for me.
8I. Click "Start".
8J. On the next dialog, you can change the Country and Language if you like - either way doesn't make a difference. Click "OK".
VERY IMPORTANT: Once you click "OK", ignore any error dialogs that pop up. I mean every single one. Don't click any buttons in them, just drag them out of your way if necessary. 99.9% of the time, given enough time the device will be flashed successfully anyway. On the VK810, usually within 20 minutes. For comparison, on the VS985 Verizon LG G3, usually within 10 minutes.
Rooting VK810 official stock release 11A (11A is chosen for two reasons: 1. because it's easiest to root with the Stump app and 2. because on anything newer than 11A, you'd have to manually downgrade the bootloader before being able to install TWRP the first time):
http://forum.xda-developers.com/showpost.php?p=64577888&postcount=2
Installing the initial (necessary) TWRP v2.7.0.1 and updating it to the latest TWRP v2.8.7.0:
http://forum.xda-developers.com/showpost.php?p=64577888&postcount=3
Flash to the latest stock ROM so that you can have it with root:
http://forum.xda-developers.com/showpost.php?p=64601845&postcount=4
In order to get back into TWRP/custom recovery from rooted Lollipop or above ROMs:
http://forum.xda-developers.com/showpost.php?p=64601845&postcount=5
General thanks to, for my previous experience:
@AndroidFileHost for the Android File Host website and especially their changes allowing for the reorganization of already uploaded files.
@KyPbP for letting us know it's availability and giving the link to download the VK810 35A_08 KDZ. http://forum.xda-developers.com/showpost.php?p=60851710&postcount=108
@Revoe for letting us know the availability of the VK810 36B_00 OTA. http://forum.xda-developers.com/lg-g-pad-83/general/verizon-lg-g-pad-8-3-vk810-altev-ota-t3182449
@hsbadr for giving me permission to kang his Verizon G3 VS985 JasmineROM 7.0 update script for this use. http://forum.xda-developers.com/showpost.php?p=56005236&postcount=1
@rant for giving a link to the official Verizon PDF detailing 35B. http://forum.xda-developers.com/showpost.php?p=60857092&postcount=1 http://www.verizonwireless.com/dam/support/pdf/system_update/benefits-lg-g-pad-83-5-20-15.pdf
@DeanGibson for giving a link to the official Verizon PDF detailing this release. http://forum.xda-developers.com/showpost.php?p=62413430&postcount=2 http://www.verizonwireless.com/dam/support/pdf/system_update/benefits-lg-gpad-83-8-17-15.pdf
@Chainfire for SuperSU! http://forum.xda-developers.com/showthread.php?t=1538053
@Hnk1 for continued support, advise and ideas, and for experimenting to find out how to root 35A_08 without downgrading.
@xdabbeb for further knowledge about the partitions!
In order to get back into TWRP/custom recovery from rooted Lollipop or above ROMs:
1. Download the corresponding "aboot only" (aboot is the bootloader) found in the same place to download as my ROM zip. Corresponding means if you installed the latest 36B VK810 stock ROM, then download the 36B VK810 aboot zip file.
2. Download the 4.2.2 aboot package from http://forum.xda-developers.com/showpost.php?p=54533937&postcount=2
Credit and thanks @paperWastage !
The download link is about three quarters down in that second post.
3. Move this aboot.4.2.2.img file into the top of the internal storage (meaning, not in a folder).
4. In Terminal Emulator type (make sure no typos, or can copy/paste to be sure):
Code:
su
dd if=/sdcard/aboot.4.2.2.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
5. You can now reboot into recovery via your preferred method.
6. Once you're finished in TWRP, you need to re-flash the newer aboot zip downloaded in step 1 above. If you forget, the ROM won't boot. You should be able to long-press the power button to force the device off, then use the manual method to get back into TWRP mentioned in step 22 in the previous section above. Re-flash the newer aboot zip, then reboot from TWRP and the ROM will boot.
You can alternatively dirty flash my ROM zip instead of just the aboot. You'd have to re-flash SuperSU.zip and any debloat zips too.
Reserved
Update
Ok, so I installed TWRP and flashed the new version. I then cleaned out my internal memory and loaded several files to the external SD card for the final process. I flashed "ViKtory810ROM_v36B_00+5.0.2+with+36B+aboot+[no+custom+recovery+after]+-+MD5+50fe66dfd0b57a50694accef47263a94" first. Then I flashed "UPDATE-SuperSU-v2.46". Next I flashed "VK810.4G+36B_00+5.0.2+-+no+OTA+-+MD5+b031ab290cde9f6fa0e30db8ef61223a". Then flashed "VK810.4G+36B_00+5.0.2+debloat+-+all+EXCEPT+still+has+OTA+-+MD5+e215ad72cb4fc9d5841217faa5048444". Then I flashed "VK810.4G+36B_00+5.0.2+debloat+-+LG+apps+&+UI+sounds+-+MD5+9a15512ed7754ef7fccf8b017c631199". I flashed them in that order from TWRP v2.8.7.0. After reboot the new ROM loads up and it seems to be working ok except for one issue. I keep getting an error popping up that says "Unfortunately, the process com.android.phone has stopped. Then it shows activation complete and shows my phone number listed under that. After that the pop up appears and say Unfortunetly, the process com.android.phone has stopped. I clear the pop up and it says activating tablet again, then shows the activation complete with my phone number all over again. Then the pop up appears again. This is an endless cycle of happening. I haven't done anything on the tablet as of yet. I want to know what your thinking. Is there something I need to do with one of the settings? I'm also noticing its not connecting to the cell towers. Ok, hope you can help. Thanks again!
JBurch/cry said:
Ok, so I installed TWRP and flashed the new version. I then cleaned out my internal memory and loaded several files to the external SD card for the final process. I flashed "ViKtory810ROM_v36B_00+5.0.2+with+36B+aboot+[no+custom+recovery+after]+-+MD5+50fe66dfd0b57a50694accef47263a94" first. Then I flashed "UPDATE-SuperSU-v2.46". Next I flashed "VK810.4G+36B_00+5.0.2+-+no+OTA+-+MD5+b031ab290cde9f6fa0e30db8ef61223a". Then flashed "VK810.4G+36B_00+5.0.2+debloat+-+all+EXCEPT+still+has+OTA+-+MD5+e215ad72cb4fc9d5841217faa5048444". Then I flashed "VK810.4G+36B_00+5.0.2+debloat+-+LG+apps+&+UI+sounds+-+MD5+9a15512ed7754ef7fccf8b017c631199". I flashed them in that order from TWRP v2.8.7.0. After reboot the new ROM loads up and it seems to be working ok except for one issue. I keep getting an error popping up that says "Unfortunately, the process com.android.phone has stopped. Then it shows activation complete and shows my phone number listed under that. After that the pop up appears and say Unfortunetly, the process com.android.phone has stopped. I clear the pop up and it says activating tablet again, then shows the activation complete with my phone number all over again. Then the pop up appears again. This is an endless cycle of happening. I haven't done anything on the tablet as of yet. I want to know what your thinking. Is there something I need to do with one of the settings? I'm also noticing its not connecting to the cell towers. Ok, hope you can help. Thanks again!
Click to expand...
Click to collapse
You're welcome! Everything debloated in the LG/etc debloat zip is also debloated in the debloat All, FYI.
Sorry you're having trouble. I haven't had that experience at all. Did you wipe Data, Cache and Dalvik too? Sadly, without being able to fully use Android you won't be able to get back into TWRP since you have to temporarily redowngrade the bootloader (aboot.img) to get into it (the last section "In order to get back into TWRP/custom recovery from rooted Lollipop or above ROMs").
I know there's a way in Android to boot in a "safe mode" but I've only done it by accident and can't recall how. I don't know if that would make any difference anyway.
If you can use the hardware keys to get into the stock-looking recovery you could try re-wiping Cache but I wouldn't have much hope of that doing the trick, either.
I hate to say but if none of these things work the only way to get back into TWRP without the use of Android is to use LG Flash Tool 2014 to re-flash the 11A KDZ and start over.
I guess I'm going to have to write the detailed instructions for how to check MD5 hashes and add that into the OP, as that would be something I would ask if was done when anyone has problems after a flash.
@JBurch/cry I wrote up directions for checking MD5 hashes on Android - they're in the section for flashing my ROM. I realized that this won't help you in your current situation unless you take the MicroSD card out and put it in another Android device and check the hash on there.
I'm debating whether I should write up directions for checking MD5 hashes on Windows too.
So uh ya
roirraW "edor" ehT said:
You're welcome! Everything debloated in the LG/etc debloat zip is also debloated in the debloat All, FYI.
Sorry you're having trouble. I haven't had that experience at all. Did you wipe Data, Cache and Dalvik too? Sadly, without being able to fully use Android you won't be able to get back into TWRP since you have to temporarily redowngrade the bootloader (aboot.img) to get into it (the last section "In order to get back into TWRP/custom recovery from rooted Lollipop or above ROMs").
I know there's a way in Android to boot in a "safe mode" but I've only done it by accident and can't recall how. I don't know if that would make any difference anyway.
If you can use the hardware keys to get into the stock-looking recovery you could try re-wiping Cache but I wouldn't have much hope of that doing the trick, either.
I hate to say but if none of these things work the only way to get back into TWRP without the use of Android is to use LG Flash Tool 2014 to re-flash the 11A KDZ and start over.
I guess I'm going to have to write the detailed instructions for how to check MD5 hashes and add that into the OP, as that would be something I would ask if was done when anyone has problems after a flash.
Click to expand...
Click to collapse
So um ya, I failed to do what you stated on task 3 of your Rom installation. You told me to do this before installation:
3. I strongly suggest wiping everything from TWRP (Data, Cache, System, Dalvik and Internal Storage). Obviously, first copy/move anything you want to keep from internal storage like the files you downloaded in the previous sections. Wiping all of these things, especially if you use my debloat zip(s) will clear up garbage/folders that were left behind by previous bloat.
So.... I pulled a stupid.....When reading this I thought you meant to go into my folders "on the tablet" and manually delete the things I put in there. I didn't realise you meant to do it through TWRP before installation lol. So after coming to grips with the idea that I now need to start completely over,,,, I rebuilt the entire thing correctly in 20 minutes. Sad this took me 3 days to learn everything by reading over countless forums. Your help was absolutely necessary to bring it all together. My tablet is fully upgraded and that was the best money I've spent in along time. The next time i get a device, you'll get first crack at helping me. If everything goes well, I'll make sure to double the donation next time. Your experience is valuable and should come at a cost. Thank you and I look forward to talking with you in the future. Take care! Now to get busy using this thing.
JBurch/cry said:
So um ya, I failed to do what you stated on task 3 of your Rom installation. You told me to do this before installation:
3. I strongly suggest wiping everything from TWRP (Data, Cache, System, Dalvik and Internal Storage). Obviously, first copy/move anything you want to keep from internal storage like the files you downloaded in the previous sections. Wiping all of these things, especially if you use my debloat zip(s) will clear up garbage/folders that were left behind by previous bloat.
So.... I pulled a stupid.....When reading this I thought you meant to go into my folders "on the tablet" and manually delete the things I put in there. I didn't realise you meant to do it through TWRP before installation lol. So after coming to grips with the idea that I now need to start completely over,,,, I rebuilt the entire thing correctly in 20 minutes. Sad this took me 3 days to learn everything by reading over countless forums. Your help was absolutely necessary to bring it all together. My tablet is fully upgraded and that was the best money I've spent in along time. The next time i get a device, you'll get first crack at helping me. If everything goes well, I'll make sure to double the donation next time. Your experience is valuable and should come at a cost. Thank you and I look forward to talking with you in the future. Take care! Now to get busy using this thing.
Click to expand...
Click to collapse
Cool! Glad at least it was something simple, even if a little bit painful to fix. You must at least be a fast learner.
Maybe I'll separate that into two steps to distinguish them.
Enjoy! I hope we get 5.1.1 someday because 5.1.1 on the G3 is so much better than 5.0.x was. You're welcome and thank you! I never even took donations until a few months back when one or two people wanted me to.
Most of the time I enjoy just seeing someone successfully do whatever they're trying to do.
Thank you, I felt so much better using this than some sketch chinese program.
FL4NKENSTEIN said:
Thank you, I felt so much better using this than some sketch chinese program.
Click to expand...
Click to collapse
You're welcome! I know what you mean.
Hey. Not sure if I am posting in the correct thread so apologises if warranted.
I recently rooted my vk810 with king root. Seemed to be the only thing to work. Only after I rooted did I realize that king root probably was not the wisest way to go.
So I'm about to attempt to unroot and hopefully get this thing rooted and a decent rom working. I like the tablet but all the verizon crap and associated bloatware are driving me nuts.
A little background, I've used linux distros for a while now, but not comfortable with command line stuff. I'm that copy and paste guy...
Any ideas on where to begin? I see Mr warrior seems to be the guy. Just about all related searches end with a post by him. Kudos for helping everyone he has so far. People like him are the reason why the linux/android world is such a great place!
Thanks in advance!
Soundsofsublime said:
Any ideas on where to begin? I see Mr warrior seems to be the guy. Just about all related searches end with a post by him. Kudos for helping everyone he has so far. People like him are the reason why the linux/android world is such a great place!
Thanks in advance!
Click to expand...
Click to collapse
Just follow all of the directions in the first through fifth posts and they'll get you there. You'll need a Windows PC.
Some people have told about an app called "SuperSU Me" (not by @Chainfire) to replace Kingroot with SuperSU. I have no experience with that or links to it, however.
Thanks and you're welcome!
Lost on step 3.20
i think i messed up somewhere in the "VK810_twrp_2.7.0.1.zip" copy/paste section using X-PLORE. when i type in the "cd /data/local/temp" command in the emulator it
returns "sh: cd: /data/local/temp: no such file or directory". any help would be greatly appreciated.
for the record, this is my first time trying any type of root process.
thanks
***********************
update: i figured it out.
Slingb1ade said:
i think i messed up somewhere in the "VK810_twrp_2.7.0.1.zip" copy/paste section using X-PLORE. when i type in the "cd /data/local/temp" command in the emulator it
returns "sh: cd: /data/local/temp: no such file or directory". any help would be greatly appreciated.
for the record, this is my first time trying any type of root process.
thanks
***********************
update: i figured it out.
Click to expand...
Click to collapse
Thanks for the update. What did you figure out was the trouble? Didn't do the "SU" command first?
How to unlock boot loader anyone suggest me
zaccheo said:
How to unlock boot loader anyone suggest me
Click to expand...
Click to collapse
No one has done it. Someone more knowledgeable than I would have to tackle it.
roirraW "edor" ehT said:
Thanks for the update. What did you figure out was the trouble? Didn't do the "SU" command first?
Click to expand...
Click to collapse
i didn't pay attention to the provided instructions "20. In Terminal Emulator type (make sure no typos, or can copy/paste to be sure)"
i was typing temp, needed to type tmp.