hi all,
who can help me with this problem ?
last night i tried to via OTA(wifi) update my Atrix.
when the downloading progress to 69%, my internet disconnected....an Orange triangle with excalmatory mark shows on the upper left conner of the Screen "Enable Wi-fi to start download update". but when i reconnect with wifi nothing happend.
please help me, how can i restart the downloading progress...
thx
with regards
Related
Any1 able to get this working /?
I have tried on my 32a , with no luck.
I tried the stock rom and eclair roms , as well as the firmware fix.
My other phones connect fine (vista32) , with my mytouch i get a constant "paired but not connected" message, i tried the long press and then connect but that did not help , it just goes back to "paired but not connected"
NO LUCK NO JOY plz help!
ps: also tried rebooting and airplane mode / on/off
Hi there, I am from Thailand and I have problem with my A500. That i cannot access to the recovery mode and it shows picture of Android with this "!" symbol. The main problem is that i cannot update my firmware over the OTA when it completed download firmware and i installed it and then it appeared this "Update is invalid and has been canceled". So please help me to fix this problem, i really want to use 3.1!!!
Known issue. Acer have reportedly now pulled the 3.1 update whilst they fix the problem, and will re-issue it "tomorrow".
Otherwise, so far, the only known fix is to keep trying until it works.
Thank you for your reply FloatingFatMan. How about the issue that it cannot access to the "recovery mode", i have tried to update firmware myself and i stuck with this problem. Do you have any ideas for that???
My problem is that my smartphone (imo s89 miracle) doesn't want to download the EPO-file. It starts, then stops at 25%, then retries for endless times.
The wifi connection is OK. what should i do? please help me. :crying:
Hello xda,
Just two days ago out of the blue while transitioning from home to the train with the Tegra on off (I remember turning it off during charging before I left) as I sat down on the train I found it turned on (unusual) I didn't think much of it but since then I later noticed that my Wifi was stuck on the "Turning Wifi on" message and that the app wouldnt allow me to click the cog in the top left to return to the settings page (moreover when I click the open programs buttons it just disappears..strange) the only reason my attention was brought to this was because my Bluetooth gave me an error saying it couldnt share bluetooth anymore.
At the time I thought a simple restart would fix it but nope it didn't. My tegra is rooted but I have had no problems until now!
Since then I have done
Factory data reset
Cleared memory cache
Factory restored using the advent factory 4.3 image http www adventcomputers co uk / product-download-select/296 (sorry first posts and I don't seem to be allowed to post links).
Right now I find myself stuck at the "Welcome" screen as after I select a language and press next the wifi tries to turn on and I cannot skip this.
Any suggestions on what I should/could try please? Is it a hardware problem like it happened with the Samsung Galaxy?
Thank you
Does anyone have a suggestion?
I am trying to compress the latest stock rom (Roms Stock 4.4.2 from rootjunkysdl) into a system.img in ext4 format so as to then place it in the automatic Vega-tegra recovery tool found at: www adventcomputers co uk / product-download-select/296
At the moment I am stuck at the fompressing a folder directory into an ext4 file .img format.
Anyone have any ideas?
The reason I am trying the above is because upon resetting it with the above mentioned recovery tool, the WiFi is still on "turning on" however with it resetting it to version 4.3 means I cannot find a way to bypass the welcome screens as it won't allow me past until I manage to connect it to the internet.
Please, any help at this point would be very much appreciated
Fiztban said:
Does anyone have a suggestion?
I am trying to compress the latest stock rom (Roms Stock 4.4.2 from rootjunkysdl) into a system.img in ext4 format so as to then place it in the automatic Vega-tegra recovery tool found at: www adventcomputers co uk / product-download-select/296
At the moment I am stuck at the fompressing a folder directory into an ext4 file .img format.
Anyone have any ideas?
The reason I am trying the above is because upon resetting it with the above mentioned recovery tool, the WiFi is still on "turning on" however with it resetting it to version 4.3 means I cannot find a way to bypass the welcome screens as it won't allow me past until I manage to connect it to the internet.
Please, any help at this point would be very much appreciated
Click to expand...
Click to collapse
Try some USB 3g/4g Dongle and insert it into micro USB , then you can connect to internet via 3g/4g and see if you can get past welcome screen.
...
I had similar problem "wifi just showing turning on forever" with a phone. But that had happened because I had accidently deleted the "insmod" binary from "/system/bin/" folder ( actually replaced it with the one that came with "precompiled busybox-1.21.1-armv7" from busybox.net.) So at that time my phone was not able to load the "Wifi module some .ko extension file") See if you are also having this problem.
asratxda said:
Try some USB 3g/4g Dongle and insert it into micro USB , then you can connect to internet via 3g/4g and see if you can get past welcome screen.
...
I had similar problem "wifi just showing turning on forever" with a phone. But that had happened because I had accidently deleted the "insmod" binary from "/system/bin/" folder ( actually replaced it with the one that came with "precompiled busybox-1.21.1-armv7" from busybox.net.) So at that time my phone was not able to load the "Wifi module some .ko extension file") See if you are also having this problem.
Click to expand...
Click to collapse
Thank you for your reply, my tegra is not set up for 3/4G as far as I know, wouldnt connecting a dongle require some app installation?
wifi stuck at "turning on" for months
Hi
My tablet turned off and on then would not connect to wifi it gets stuck at turning on amd i cannot press any buttons to turn it on.
I have reset. Put in airplane mode and finally factory reset so now it asks to connect at Welcome page but still shows turning on.
I have not rooted or am not technically savvy i just know the basics but i do not know what to do and cannot use my tablet at all!!
Please help!!
aimeymarie said:
Hi
My tablet turned off and on then would not connect to wifi it gets stuck at turning on amd i cannot press any buttons to turn it on.
I have reset. Put in airplane mode and finally factory reset so now it asks to connect at Welcome page but still shows turning on.
I have not rooted or am not technically savvy i just know the basics but i do not know what to do and cannot use my tablet at all!!
Please help!!
Click to expand...
Click to collapse
You are having one of the symptoms of a bad OTA update/Flash/etc.
I described my problem in detail here: http://forum.xda-developers.com/nvidia-tegra-note-7/help/help-tablet-stuck-fastboot-t2967999
Today I plan to work on it, I'll let you know if I get it going again with Wireless and what I had to do.
Hello Everybody,
I have an issue with a 830L tab which got in my hands by a friend who did a "unknown" update, and from that moment the tablet is stuck. It powers on correctly, but can only go in the setup page (white background and blue characters) and can also be powered on in fastboot mode. Nothing else. I found a lot of stuff on the net and in this site too, but nothing gets me out of this situation.
I tried to flash the tablet with Lenovo_Yoga_Tablet_2_830L_S000197_ROW and Lenovo_Yoga_Tablet_2_830L_USR_S000067_141030 firmwares, but with both of them, after cmd1 (fastboot boot droidboot.img) the tab goes off and then on normally, so it gets disconnected from the pc and the flashing fails (I also set the sparsing to 500MB). I also tried with restore-kitkat-bios-830-1050-v2 which is correctly displayed but doesn't act as a cure: keeps saying "prepairing for push files" but doesn't move from that point.
In the setup page is displayed BLADE_21.X64.0005.R00.1504101447 FFD8_X64_R_2015_04_10_1448
Could it be any setting in the setup page which may affect the flashing?
Can anyone help?
Thanks in advance
please... just a little help...