Database Users

PLEASE HELP(myTouch 3G keeps rebooting)

Ok so I followed cyanogenmods wiki page on how to root and flash his rom to my MT3G(with the exception that after i flashed the DRC83 base zip file the phone rebooted automatically so I went into recovery mode as soon as it happend and flashed cyanogens build) and the phone booted up fine. the little android skater and everything. everything was running smooth(NOTE I DID NOT DO THE 10MB hack) but i tried setting up wi-fi and the phone just restarted. i thought it was probably the first time boot thing people talk about. but then the phone randomly turns off and on while doing diffrent things(such as download apps from market ... texting a message) so i tried flashing another ROM and same thing is happening(dwangs super d rom). is there a reason for this. the guide didnt mention having to change any SPL's or radio's or anything but I keep seeing this around the forum that it has to be changed. is there a guide on how to do that and if so why doesnt CyanogenMods own wiki not mention it?

do u have 32a or 32b?

the 32b. i have the original mytouch 3g

vampsandbats said:
the 32b. i have the original mytouch 3g
Click to expand...
Click to collapse
(im assuming you downgraded to 1.5 using sappimg.nbh from hboot mode, then rebooted and installed flash_rec, backed up image, and then flashed amon ra's recovery image correct?)
so if you did all of that,
do a wipe and then flash DRC83, after that reboot phone and check to see if you are getting any uncommanded restarts. if you are not then reboot into recovery and flash your rom.
what rom are you exactly trying to flash?

My mytouch 3g also got constant reboots, regardless of whether I was actively using the phone or not. This happened with cyanogenmod and with another eclair ROM, but does NOT happen with Enomther's TheOfficial rom. I switched back to that and fixed the problem. I don't know what was causing it for me with the other roms, but it happened fairly consistently every 1-3 hours.

OK CAN SOMEONE PLEASE TELL ME IF IM DOING SOMETHING WRONG HERE ILL DO A STEP BY STEP
-COPY SAPPIMG FILE TO SDCARD
-HOLD DOWN VOLUME DOWN AND POWER AND PROCEED WITH UPDATE
-BACK TO STOCK 1.5
-DOWNLOAD APPMANAGER
-MOUNT SDCARD AND COPY FLASHREC 1.1.3 APK FILE AND recovery-RA-sapphire-v1.6.2G-green FILE(CARE BEAR FILE)
-ALLOW UNKNOWN SOURCES TO INSTALL
-INSTALL FLASHREC
-BACKUP FLASH
-TYPE /SDCARD/recovery-RA-sapphire-v1.6.2G-green.IMG
-REBOOT IN RECOVERY(PROBLEMS START. RECOVERY MODE RANDOMLY KEEPS REBOOTING.SOMETIMES AFTER ONLY A COUPLE OF SECONDS)
-OPEN BATTERY COVER AND AND TAKE OUT SDCARD AND PUT IT IN SD ADAPTER AND CONNECT TO MY MAC
-COPY THE ROM I WANT TO USE WHICH IN THIS CASE IS SUPERD193 WITH 10MB RAM HACK
-INSERT SD CARD BACK INTO PHONE AND MANAGE TO WIPE AND FLASH ZIP FILE.
-ROM LOADS UP AFTER AWHILE BUT SEEMS LAGGY
-OCCASIONLY WILL REBOOT FOR NO REASON BUT NOT TO MYTOUCH LOGO BUT RATHER ANDROID SPLASH LOGO WHICH IN THIS CASE IS SUPER D ANDROID WITH ELECTRICTY.

Rooted with hboot 1.49 S-ON?

I had Leak 2.1v3 on my phone, and following the XDA thread, I've successfully rooted my Eris using the stock 8gb card. Twice. I re did the root thinking I corrupted the RUU file, or something else during the initial root. I have Amon recovery installed and accessible at will.
I have full access to my phone with adb shell with SU access, but I'm unable to boot into any custom rom. So far I've tried Evil Eris 3.0 and Aloysius. They install without errors, but on reboot the phone to access the rom, the phone will freeze or loop. I've tried waiting over 20 minutes with the HTC boot screen flashing about every 15 seconds after installing Aloysius.
I'm still showing hboot 1.49.0000 S-ON. Is this what is stopping me from booting a custom rom? Or am I missing something that will change the security status to off?
Suggestions? What am I missing?
Thanks

Ok, looks like I got somewhere, I managed to install the grdlock beta rom. Not sure why the other roms wouldn't install tho. They all came from the same source. hboot is still 1.49.0000 S-ON tho.

NAA_Silent said:
Ok, looks like I got somewhere, I managed to install the grdlock beta rom. Not sure why the other roms wouldn't install tho. They all came from the same source. hboot is still 1.49.0000 S-ON tho.
Click to expand...
Click to collapse
The new rooting method ("Incredible/Slide") does not currently replace the S-ON bootloader, so phones rooted this way will not have 1.49.2000 S-OFF on them.
As for your troubles, you need to Wipe /data (FR) in Amon_RA recovery before you install a new ROM. Amon_RA does not enforce wiping of the /system and /data partitions before a new rom is loaded from the SD card, so you probably ended up with a mixture of old ROM and new ROM in a couple of places. (The dev can pre-clean those partitions in the update-script, but I'm not sure if that happens for the ROMs you mentioned.)
Always a good idea to wipe before a new ROM install (not necessary for a Nandroid restore, though, because it does a wipe itself).
bftb0

I thought I'd wiped those caches within Amon recovery. Good to know that I'm not going insane with the 1.49 S-ON tho! I couldn't find anything anywhere to let me know the S-ON was normal. After I get everything up and running with the grdlock rom, I'll back it up and try one of the other roms, being darn sure to wipe everything Amons will let me wipe first. Thanks for the info!

It appears that the rom files that I was using were corrupt. Without the md5 info for those files I had no way of checking. I went to a different site and downloaded Aloysius 12, and it's up and running just fine now
Thanks for the nudges in the right direction!

[Q] i think i bricked my mytouch 3g...please HELP..ASAP..PLEASE

I have a original nytouch 3g rooted, just flashed to the cm6-rc2, it worked fine EXCEPT there's NO market app and gmail app. so i went online to ask and some1 said to install market and gmail i need to have Gapps installed and he showed me to go to Rom manager to get those. I went there and saw google app but to be able to install it, it said i must have the ClockworkMod installed first, so i did then it prompt to reboot the phone...i hit OK to reboot it and the phone just got STUCK on the Booting loop, never got to the home screen, i assumed i bricked the damn phone. basically, iam screwed..please anyone help me to fix it, PLEASE..thanks alot

Can u get into recovery or anything? That shouldn't brick your phone. U need to go to amonra 1.7.0 recovery. Forget that method of gapps. Just download and flash the link. People have been having a lot of problems with your method
Sent from my Chromatic Magic using XDA App

well, i tried to turn on the phone by holding home+power, it went to this screen:
ClockworkMOd Recovery v2.5.0.1
-reboot system now
-apply sdcard:update.zip
-wipe data/factory reset
-wipe cache partition
-install zip from sdcard
-nandroid
-partitions menu
-advance
________________________________
ClockworkMod Recovery v2.5.0.1
if i try to select reboot system now, it wont work, it'll will boot but got stuck on boot screen forever.
i did try to select "wipe data/factory reset" then "wipe cache partition" then select "intall zip form sdcard" then it takes me to my sdcard that shows this:
Choose a zip to apply
-Android/
-clockworkmod/
-dcim/
-lost.dir/
-update-cm-6.0.0-DS-RC2-signed
I select "update-cm-6.0.0-rc2..", wait for it to flash then reboot and the phone still gets stuck on boot screen, seems like nothing fixed..
I assumed the issue is the ClockworkMod messed everything up, but i just don't know how to get rid of it....
sigh....so frustrated...i had an iphone before and it's so simple, if you mess up just restore via itunes and everything goes back to stock.. anyway, please help anyone...please

Did u try downloading amonra 1.7.0 and flashing it?
Sent from my Chromatic Magic using XDA App

Did u do a nandroid backup before u flashed the Rom? If u did just restore. If u can I have RA-sapphirev-1.7.0g as my recovery. Same phone as u. You're not bricked. Just need to undo what u did.
Sent from my Chromatic Magic using XDA App

no, i didn't do any backups...stupid me..is there any other way to fix when i don't hava a backup?

Can you get your sdcard to show up on your computer? If you can. Try wiping everything in recovery. Re-partition your sdcard leaving the values as they are. Then download cyanogen 5.0.8 http://forum.xda-developers.com/showthread.php?t=688262 putting that on your sdcard and flashing it to see if it boots up. Also this is the recovery you should have stayed with. http://forum.xda-developers.com/showthread.php?t=530492 and need to go back to. Page also has instructions on different ways to flash it. Let us know what happens. Use g version at top of downloads btw

Make sure that while in recovery you flash the 5.0.8.zip and then flasht the Google Add-on .zip before rebooting.

Actually I flashed them separate and all was well. Just trying to get you into the os so u can flash the recovery and get rid of Rom manager. If u can't get your sdcard on your comp to load another Rom to boot u might have to change your recovery through fastboot. Then flash new Rom. http://forum.xda-developers.com/showthread.php?t=532719. More info on fastboot flashing ect.
Sent from my Chromatic Magic using XDA App

thanks alot guys for helping, i got it worked again, though. i load cm5.0.8 on another sdcard and flash it, it finally booted to the home screen..however, when i tried to go to recovery screen again by holding home+power to flash gapps app, i still see the white "clockworkmod.." on top and bottom of the recovery screen though...weird..is there anyway to get rid of it??? cause' i think it's installed on my phone but don't know how to go in my phone to delete it. any ideas?? thanks

U still have that recovery flashed to your phone. Download the one I posted put on sdcard and use terminal method on that thread to flash
Sent from my Chromatic Magic using XDA App

clock work is fine.... do u still see the options u have? install from zip? after downloading gapp or roms correctly... go into download folder, locate gapp or roms n flash.
by downloading correctly means... having good internet connection and not having data shifting from 3g to e to wateva. plus dont do anything else beside the download. if u lose connection or shifting in connection speed... cancel download n redownload...this will keep download file from getting corrupted during download process... for future referrence - u should do this to everydownload
we r here to help hopefully this will fix ur problem
rooted mt3g 32b
cm6-rc3 htcClay 1.3
clockwork 2.5.0.1
radio 2.22.19.261

haha to make it simpler... flash cm6 rc3... gapp is preinstalled
rooted mt3g 32b
cm6-rc3 htcClay 1.3
clockwork 2.5.0.1
radio 2.22.19.261

[Q] myTouch 4G Recovery Issues! Please Help!

I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!

highrolla1866 said:
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
Click to expand...
Click to collapse
I havent had that issue exactly, but I might be able to help wlk you through getting this fixed. Ive had problems more than once myself on recovery, and helped a couple others solve other issues on here. If you want, add me on google talk (same username as on xda), and Ill walk you through it. Might have to wait till the morning, though, as Im probably gonna head to bed soon.

Fastboot 2.5 recovery and reflash froyo rom. If you decide to install CM7 again - read,search and make sure that you understand what you're doing. It has been stated at least few dozen times that Rom Manager is useless with gingerbread until Koush updates it.

Same Issue??
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!

I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/

fosunite said:
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
Click to expand...
Click to collapse
Jmg90300zx said:
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
Click to expand...
Click to collapse
Sounds like both of you should of never of done this. This has been discussed a few times, and the end result is always the same.....
Download the correct Recovery image (which can be found in the Development section) and install it to your phone by using the ADB commands, in the fastboot mode. you can find a quick and painless way to set those up in my signature. Once you have installed the recovery image you can boot into hBoot and select recovery. from there you can flash CM7 and the gapps. Once you have done all that download the official clockwork ROM manager from the market and flash his current recovery image.

[A] Bootloop after flashing a ROM via 3.0.0.5 Recovery image.

What you did .. .. ..
Okay so you've rooted your newly bought MyTouch4G, and you've made sure that s=off and you've flashed Clockwork ROM manager's recovery image that you got from the market. That is all the correct order. But when you flashed a ROM you got stuck in a bootloop.
Am i screwed???
Don't worry you are just in a "soft brick mode", or "limp mode" if you will.
What happened? Why is it doing this?
The Image that you downloaded and installed 3.0.0.5 is for 2.3 (Gingerbread) based ROMs only. [n3rd note] these are ext4 style ROMS. They act and store information differently than 2.2 which are Ext3 ROMs[/n3rd note].
This could also be caused by trying to flash a 2.3 using a older 2.x.x.x version of the Recovery Image. Those will only support the Ext3 style ROMs, which are FroYo (2.2) based ROM.
Okay what do i need to do to fix it, there are two methods.
This is Method one it's the older version.
You must use this method if you do not have the engineering screen
If you are using the 3.0.0.5 Recovery image
To fix your problem you need to flash any 2.3 based ROM, for time sake i will recommend Cyanogen(mod). Link to Cyanogen(mod)'s CM7RC4. While you are there you need to also store the G/Apps.
If you are using the 2.x.x.x Recovery Image
To fix your problem you need to flash any 2.2 based ROM, for time sake i will recommend RoyalGlacier Thread can be found here
- Question: How do i find out what Recovery image i am using
- Answer: Boot the phone into the recovery mode. We'll touch on that in a little bit
Now when you download both of those files you also need to store them to SDCard.
NOTE: If you are using 2.x.x.x and going to flash RoyalGlacier you will not need the g/apps. They have included this in their ROM, and MAKE sure to follow their specific directions for installing the ROM.
- Question: Now how in the world i am going to do that since my phone is in bootloop.
Answer:
Two ways one can do that
1) use a SDcard reader and just plug the card into a main USB port.
2) Mount the SDCard in the phone via the Recovery Image. *** i'd recommend this method since you are going to need to be in recovery anyway ***
Pull the battery from the phone an put it back in, then put the back on the phone. turn the phone on holding the power button along with the volume down rocker button. That will boot the phone into the HBoot (Engineering) Screen. From there you will see an option that says "recovery" [this is what i mentioned earlier, about the different versions] use the volume rocker to select it, then tap the power button to select it. The phone will reboot into what is called the recovery image. From there you will select "mount" then USB. That will mount the SDCard to the Computer.
If you are using the 3.0.0.5 Recovery image
Once you have move Cyanogen(mod) and the g/apps to the SD card unmount the SDCard.
Then navigate to "wipe data/factory reset" you will want to wipe the phone. That will format everything to a fashion that can be written over w/o problems.
Then navigate to "install .zip from sdcard" > " choose .zip " > then flash the main Cyanogen(mod) ROM. Then do the same but flash the g/apps that you downloaded.
Once those are done you can re-boot the phone. That will boot you into cyanogen.
If you are using the 2.x.x.x Recovery image
Please use the link i supplied above to get that ROM up and running once it is done, according to their instructions come back here.
Now i understand that may or may not want Cyanogen nor RoyalGlacier on your phone. Well take care of that
What can i do to prevent this from Happening again?
Once you are up and running (make sure to log into your Google Account) go to the market and download Clockwork ROM manager again, and re-flash the recovery image.
Once you are done with that i HIGHLY suggest upgrading to the newest 3.0.0.6 Recovery image. You can do that one of two ways.
one way is to flash True_Blues method for installing 3.0.0.6 recovery image. Use this thread..
This is the way that i would personally recommend.
The second way is download the 3.0.0.6 recovery image, which i've attached and flash it via the ADB commands. If you want to do it this way you do not need to download Clockwork Rom Manager, you can "just flash it". If you need help with that, if you are using Windows or Mac, see my signature for True_Blue's method on EZ ADB. If you are using Unbutu 10.10 use this This Method to get ADB running. This is the method i used to ADB running on my Linux NetBook.
Download the file that i've attached and store just the recovery image from the .zip to the SDCard, from the ADB commands type
adb shell
su
flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
More information on this process can be found here
That will flash the newest recovery image to your phone
Once you have installed the 3.0.0.6 ROM Manager you can wipe and flash ANY MyTouch4G ROM that you want. It will handle both 2.2 (ext3) and 2.3 (ext4) ROM formats.
This is the New Method - Which is a little easier.
AND YOU MUST HAVE THE ENGINEERING HBOOT
Thanks to TeeJay for inspiring this.
I am going to assume that since you have the Engineering Screen you are more familiar with what you are doing so i'll be more to the point with this walk-through.
you will need to have ADB up and running for this method.
1) Download the attached file and store just the .img to your folder from which you preform all of your ADB commands
2) plug the phone into the computer
3) boot the phone into HBoot
4) from the ADB commands change the drive to the folder where you stored the recovery image.
5) type these commands
Code:
fastboot flash recovery recovery.img
the screen should say something to the degree of
Code:
sending 'recovery' (3426 KB)... OKAY [ 1.172s]
writing 'recovery'... OKAY [ 0.797s]
finished. total time: 1.969s
6) then select "bootloader"
7) navigate to "reboot recovery"
8) flash your ROM of choice.
9) enjoy your ROM of choice.
Please feel free to use this in your signature or link people back to. If you feel i made an error in this post please PM and i'll edit it accordingly.
If this thread has helped you solve your problem please hit the "thanks" button.
THE RECOVERY IMAGE HAS BEEN UPDATED TO THE NEWEST ONE.

good summary. originally when i flashed cm7 I had to search a bit to come up with what you said above. one addition, CWM lets you mount sd storage to usb so you can copy files to sdcard (say the recovery image). then update CWM 3.0.0.6 with ADB.

leo221 said:
good summary. originally when i flashed cm7 I had to search a bit to come up with what you said above. one addition, CWM lets you mount sd storage to usb so you can copy files to sdcard (say the recovery image). then update CWM 3.0.0.6 with ADB.
Click to expand...
Click to collapse
Added that method as well.

May want to mention that the opposite could be true as well > same boot loop but from flashing 2.3 rom with recovery 2.5.1.2

Thank you for this!! Exactly what I needed...!

austengeist said:
Thank you for this!! Exactly what I needed...!
Click to expand...
Click to collapse
Glad it helped, just make sure to hit the "Thanks" button in the first post.

dang man you're the Q&A champ, every time i'm on this you're answering questions.
well this worked like a charm, idk why people on xda always make things more complicated than it has to be.

option94 said:
May want to mention that the opposite could be true as well > same boot loop but from flashing 2.3 rom with recovery 2.5.1.2
Click to expand...
Click to collapse
Added.
aalsmadi1 said:
dang man you're the Q&A champ, every time i'm on this you're answering questions.
well this worked like a charm, idk why people on xda always make things more complicated than it has to be.
Click to expand...
Click to collapse
Well i work in the Imported Automotive parts. My job requires me to basically sit around and answer the phone when it rings. We have our own "call center" room. I just pick up the phone and answer question and sell parts. Like right now i'm working on a engine rebuild kit for a 1975 2Ton Mercedes Bens..... so i get some free time from time to time, and XDA is one of a few sites they allow me to visit.... BGR/ Android and Me, Android Central are the others....
I can see why some people blow up, spend +$200.00 on a phone then turn around and blow through something w/o taking the time to read something and then you get stuck in a bootloop.... i can see why people go bonkers. But slowing down and reading would solve alot of problems. Heck i've got 3 great threads in my signature that would solve alot question that one could have with a new device.

fixed my problem

Thread stuck.

Great guide!

Same issue, except i flashed 3.0.0.6 beforehand to prevent any problems. Iced Glacier flashed okay, I just didn't care for it much. Ive wiped all the necessary parts prior to flashing as I would before flashing any roms. Ive managed to retrieve and restore a previous back (I can haz backups) so Im not stuck. I would like to be in the cool kids cyanogen club. Any ideas?

DHSdrone said:
Same issue, except i flashed 3.0.0.6 beforehand to prevent any problems. Iced Glacier flashed okay, I just didn't care for it much. Ive wiped all the necessary parts prior to flashing as I would before flashing any roms. Ive managed to retrieve and restore a previous back (I can haz backups) so Im not stuck. I would like to be in the cool kids cyanogen club. Any ideas?
Click to expand...
Click to collapse
Meaning you want to run Cyanogen(mod)? Well jump over to their site and download the ROM of your picking; Nightlies are alpha builds, and the RC's are beta builds. I've ran both and both are extremely stable. I have links supplied in the first post. and directions for that matter. just make sure to do a nandroid backup before wiping and flashing.

Thanks ....Saved ME LIFE

Posting so I can see the "thanks" button. Doubley thanks you saved my bacon....err phone!! Hmmmm bacon!

Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!

b0rnsusp3ct said:
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
Click to expand...
Click to collapse
Pull the battery. Hold vol down power on them restore cm7. Then flash cwm 3.0.0.6.
Sent from my Inspire 4G using XDA Premium App

b0rnsusp3ct said:
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
Click to expand...
Click to collapse
What button are you pressing to select the option? you should just use the trackpad.

Loll...wow, I am such a noob i def. shouldn't be rooting or anything.
Thanks so much!

b0rnsusp3ct said:
Loll...wow, I am such a noob i def. shouldn't be rooting or anything.
Thanks so much!
Click to expand...
Click to collapse
Why do you say that?