Database Users

Bricked Streak, and what I've tried(FIXED) w/ PDF

I Encountered a number of problems when trying to upgrade to DJ's V 1.2 ROM from V 1.1.1
Problem: My phone is dead, nothing. No lights at all and I cant turn the phone on obviously.
What I've tired:
1. All key combos. Holding for up to 20 sec
a. Volumes + power
b. Volume down + power
c. Volume up + power
c. Power + camera.
d. Power + camera + volumes
2. Take battery out + sim + SD let sit for 1 hour
3. Wall charge w/ battery and back in for 1 hour.
4. Wall charge w/ out sim and SD for 1 hour.
5. Phone plugged into wall with back off and no battery.
6. Phone plugged into wall with back off no battery, sim, or SD.
Still cant get it to work, charged USB and Wall charger for 3 + hours each. Phone still does not show any signs of life. The battery is not getting hot, which means maybe is not charging at all.
FIX: download PDF. Will Update with pictures later, very rough right now.

Still cant get it to work, charged USB and Wall charger for 3 + hours each. Phone still does not show any signs of life. The battery is not getting hot, which means maybe is not charging at all.
My question: is it possible to Brick my phone so bad that it cant charge? or is this possible a cable/charger problem?

I would suggest you try a different cable. your cable may be bad.

it needs the battery in and the backplate in place in order for it to boot.
try without simcard and everything else in place. make sure the backcover is firmly closed.
you might also try this: attach to pc and press power for 3 secs , stop press power for a second and then hold both power and camera button together till it does something.

FIXED thanks to DJ Steve! Now running v1.2 sucessfully. Man is it fast and sweeett!

ryrules1 said:
FIXED thanks to DJ Steve! Now running v1.2 sucessfully. Man is it fast and sweeett!
Click to expand...
Click to collapse
can you let us know what you did, because i am having a major issue with mine as well, or let me know how i can contact dj steve to ask him directly, thanks for your help

I am working on a write up as we speak, and will send it along to those who request it.
Sent from my Dell Streak using XDA App

My rules, i would like your writ up...i had to go back to 2.1 when i got stuck on the flashing dell logo...a support guide will do so much good at this time.
Sent from my Dell Streak using XDA App

How did u fix it? Please send me the writeup.
Sent from my HTC EVO using tapatalk

Any chance of sending me the write up, as I'm in a similar situation.
Thanks

I think that most of us would like to see this.
Is there any chance you could simply post it here? Or are there trade secrets involved?

my phone too will not start up! any thing i do!!! how did u fix this?????
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull

same problem
Please can I also get a copy of this fix ?
I have same problem fast loader no longer working just stuck at dell logo...
hope this can be resolved ....
Baz

Stuck At Dell Logo
dempbm said:
Please can I also get a copy of this fix ?
I have same problem fast loader no longer working just stuck at dell logo...
hope this can be resolved ....
Baz
Click to expand...
Click to collapse
If you are stuck at the Dell Logo after flashing a Rom (install Clockwork recovery if you haven't already got in installed) press the volume up and down and power - select option 2 - when it goes into clockwork - go to partition option - mount the first three options (data - system and something else) and reboot - BAM Your back in business - you don't have to do it again except if you flash another rom (sometimes - not always)

bigdaddy4u said:
If you are stuck at the Dell Logo after flashing a Rom (install Clockwork recovery if you haven't already got in installed) press the volume up and down and power - select option 2 - when it goes into clockwork - go to partition option - mount the first three options (data - system and something else) and reboot - BAM Your back in business - you don't have to do it again except if you flash another rom (sometimes - not always)
Click to expand...
Click to collapse
Sorry I should of explained myself...
I have tried to install 2.2 (DJ_Steve) from 2.1 when i booted into flash recovery using the following for the baseband update.
fastboot -i 0x413c flash amss amss.mbn (to install the baseband)
commands and rebooted my device i already had clockwork recovery installed..(used clockwork a few times in the past for other roms) after the last step using fastboot to reboot. (fastboot -i 0x413c reboot)
my device rebooted and was stuck at the dell logo ... left it like this for about 1 hour
nothing responds now ... tried booting into recovery using both volume buttons and power ... and trying to boot into fast loader no longer works.... i have pulled the battery and tried with no luck.... and also charged the device over night...
looks like I have some activity with the usb cable in windows for the ADB driver but does not respond to any fastboot commands ....
I lost count the amount of attempts to boot into fast loader mode white screen never appears just boots into dell logo...
if I try to hold down the camara button and then the power the streak will not even power up unless I pull the battery...

dempbm said:
Sorry I should of explained myself...
I have tried to install 2.2 (DJ_Steve) from 2.1 when i booted into flash recovery using the following for the baseband update.
fastboot -i 0x413c flash amss amss.mbn (to install the baseband)
commands and rebooted my device i already had clockwork recovery installed..(used clockwork a few times in the past for other roms) after the last step using fastboot to reboot. (fastboot -i 0x413c reboot)
my device rebooted and was stuck at the dell logo ... left it like this for about 1 hour
nothing responds now ... tried booting into recovery using both volume buttons and power ... and trying to boot into fast loader no longer works.... i have pulled the battery and tried with no luck.... and also charged the device over night...
looks like I have some activity with the usb cable in windows for the ADB driver but does not respond to any fastboot commands ....
I lost count the amount of attempts to boot into fast loader mode white screen never appears just boots into dell logo...
if I try to hold down the camara button and then the power the streak will not even power up unless I pull the battery...
Click to expand...
Click to collapse
This is the exact problem I and a few others on Modaco are having, hopefully we can get a solution in the next few days. after the streak, using a normal phone is agonizing.

mrgribbly said:
This is the exact problem I and a few others on Modaco are having, hopefully we can get a solution in the next few days. after the streak, using a normal phone is agonizing.
Click to expand...
Click to collapse
Yes I did spot your post over there....
I am sure this it's not bricked as do get some activity from a USB cable....
Back to my boring blackberry at moment

dempbm said:
Sorry I should of explained myself...
I have tried to install 2.2 (DJ_Steve) from 2.1 when i booted into flash recovery using the following for the baseband update.
fastboot -i 0x413c flash amss amss.mbn (to install the baseband)
commands and rebooted my device i already had clockwork recovery installed..(used clockwork a few times in the past for other roms) after the last step using fastboot to reboot. (fastboot -i 0x413c reboot)
my device rebooted and was stuck at the dell logo ... left it like this for about 1 hour
nothing responds now ... tried booting into recovery using both volume buttons and power ... and trying to boot into fast loader no longer works.... i have pulled the battery and tried with no luck.... and also charged the device over night...
looks like I have some activity with the usb cable in windows for the ADB driver but does not respond to any fastboot commands ....
I lost count the amount of attempts to boot into fast loader mode white screen never appears just boots into dell logo...
if I try to hold down the camara button and then the power the streak will not even power up unless I pull the battery...
Click to expand...
Click to collapse
hum, this is different problem then I had, I could not get the screen to display anything at all.

Do you think your fix might help my situation ? as mine might aswell have a blank screen ...

Ok guys, I've attached a rough guide. I'm at work and will update w/ pictures later. It might be a bit confusing, but I will fix it later.

Need help when tried to get out of flashboot I get a bootloop phone with green light

Need help tried to get into flashboot mode now the phone is bugging out. all I did was got root and went perfect then I'm trying to use the flash too program and flash a rom or something. and it was telling me to connect into flashboot mode then press the ok button on the PC to start the program couldn't connect. so I kept trying and before the phone didn't want to get into any type of recovery or flash mode now the phone if I turn it on without any USB in the phone shows the Sony sign sits there and reboots by its self. or if I just plug it into my charger I freaking still get a green light and its stuck in the flash mode how can I get it to just turn on normal so I can have a working phone. Sorry for the long story its just odd I've never had a phone where if you pressed a few buttons and the PC never even saw the phone that its freaking out like I dumped a bomb in it. but nothing was wrong I had rooted perfect and turned it off a ton of time before trying to get into flashboot mode. Thanks for any advice everyone
Sent from my Nexus S using Tapatalk

i got the same issue by you so the only solution i get is to reflash generic 2.1 with flash tool and root xrec ect..and reboot with the charger plug and let's the phone charge reboot again with cable plug and when the green light disappear on boot then flash your rom with xrec. so remember don't flash with flashtool when you in xrec this made a autoflash mode and stay in flash all the time and eat your battery and maybe damage the phone if you stay in flash for long time.
jespere que je tai aider ciao
freex10.mixdarkfroshcyanthem.bb58

Hey so you did end up getting out of this mode when it happened to you? And Im getting what your say but im sorta confused so I had android 1.6 and just finished rooting and was trying to put the phone in flashboot mode. Then I downloaded the flash tool and I moves to recovery files the the data/local or where ever they where supposed to be. Then tried to get into recovery but couldn't so I downloaded a rom or generic firmware for my type of phone. but when it said to put in flash mode by just holding the back button and put the plug in and press the ok button it wouldn't find the phone. That's when my problem began I tried to just take the battery out load normal to restart but it then just gets to the Sony sign and then turns off. The software didn't even touch the phone its getting annoying cuz I just want it to turn back on. Can you or someone post a like to where I should go with those directions you posted please
Sent from my Nexus S using Tapatalk

[Q] Stuck in fastboot, cannot use controls, already flashed everything, any ideas?

So to answer the first question, yes I followed the stickied guide up top, and yes, it successfully flashed the bootloader, wiped all data, and flashed stock ROM all to success. It appears my case is unique. I was told that it could be the battery connection, so I've done no fewer than half a dozen times of taking the back off, resetting the battery connection, and closing back up. It does not appear to be the battery.
I am stuck on the fastboot screen, the one where the android is lying down and blue squares project from an body. It shows me the controls I can make with the volume switches and the selection choice of 'Start'... but I cannot do anything. Before I went to flash I could move through the selection with Vol Up ONLY, but now I cannot even do that. Here's all the mode says:
Code:
FASTBOOT MODE
product name - grouper
variant - grouper
hw version - er3
bootloader version - 4.23
baseband version - n/a
serial number - ###############
signing - not defined yet
LOCK STATE - UNLOCKED
I've pretty spent the past twenty four hours on google searching through all the threads I've seen. They are either all dead, or most of them found the sticky fixed their problem. Has anyone heard of it coming to this?! All I can do is access fastbook VIA a DOS prompt and do fastboot commands, and if I disconnect the tablet from my PC, it'll remain in this mode with the screen on until the battery dies. Charging appears to charge the tablet, but again, no controls work. And yes, the buttons were set properly when I closed my tablet.
Anyone?

1) what is it exactly that your trying to do?
2) can u boot into the OS?
3) your recovery may be corrupt re-flash the recovery via fastboot

...Awesome... said:
1) what is it exactly that your trying to do?
2) can u boot into the OS?
3) your recovery may be corrupt re-flash the recovery via fastboot
Click to expand...
Click to collapse
I'm just trying to boot up! I don't know what happened, but I haven't been able to use it for school all week!
I cannot boot into the OS. Any time I plug this device in it sends me to the fastboot screen with no controls.
OK I just flashed CWMR 6.0.4.3 and it did not fix the problem.
Any other ideas?

I just repeated all the steps again to see if any of them failed before, they have not worked. So recap:
Stuck in fastboot mode
Android will not boot
Loose battery connection is not the problem
I am able to access fastboot on my computer
I have followed everything from the sticky (wipe everything, flash bootloader, flash image)
I have flashed a new recovery
I am still stuck in fastboot
I cannot control options in fastboot with the volume and power buttons
I can only access fastboot by charging my tablet
The only way the tablet will power down is when it completely depletes it's battery
As far as I can tell, nothing was wrong with the tablet when it was functioning
This happened when I went to charge my tablet, presumably when the battery ran flat running android
If I charge too long the tablet gets fairly hot.
That's about all the information I can provide. Is there anything else I can try? Please, I need a tablet for school and I cannot afford a new one!

Phone won't turn on

Tried to root my phone and accidentally wiped phone without ROM in phone.
Phone then would only boot into fastboot, but not recovery,
After trying multiple times to boot and sort of recovery whether its stock or twrp, nothing worked. Kept giving me failed when unlocking bootloader.
Then phone went dead. Would not boot to fastboot, recovery, or even charge.
It's completely dead and unsure what to do.
Only thing that comes to mind is to contact LeEco for a replacement since it's still under warranty. Assuming they won't be able to tell it was played with.
Anyone have any other suggestions??

hotshot8148 said:
Tried to root my phone and accidentally wiped phone without ROM in phone.
Phone then would only boot into fastboot, but not recovery,
After trying multiple times to boot and sort of recovery whether its stock or twrp, nothing worked. Kept giving me failed when unlocking bootloader.
Then phone went dead. Would not boot to fastboot, recovery, or even charge.
It's completely dead and unsure what to do.
Only thing that comes to mind is to contact LeEco for a replacement since it's still under warranty. Assuming they won't be able to tell it was played with.
Anyone have any other suggestions??
Click to expand...
Click to collapse
Leave it connected to charger for 24 hrs. U can turn the phone off by pressing both vol and power button for 15sec.
If it is x720, its already bootloader unlocked. If it js x727 u need to flash chinese rom on it first through official recovery. If u can still put phone into fastboot woth valid display, u can flash grossoshop fastboot rom yo go back to stock.

dark_prince said:
Leave it connected to charger for 24 hrs. U can turn the phone off by pressing both vol and power button for 15sec.
If it is x720, its already bootloader unlocked. If it js x727 u need to flash chinese rom on it first through official recovery. If u can still put phone into fastboot woth valid display, u can flash grossoshop fastboot rom yo go back to stock.
Click to expand...
Click to collapse
After couple days, started seeing red light blinking. Charged it and boom, was able to get it into fastboot but not recovery.
Had to flash aboot and xlm, then unlock bootloader, flash twrp, push rom and was good to go.

hotshot8148 said:
After couple days, started seeing red light blinking. Charged it and boom, was able to get it into fastboot but not recovery.
Had to flash aboot and xlm, then unlock bootloader, flash twrp, push rom and was good to go.
Click to expand...
Click to collapse
You are a freaking lucky guy then. My Le Pro 3 didn't live up any LED light after constant charging for 3 straight days. (Eventhough it went dead at about 85% battery)

hotshot8148 said:
After couple days, started seeing red light blinking. Charged it and boom, was able to get it into fastboot but not recovery.
Had to flash aboot and xlm, then unlock bootloader, flash twrp, push rom and was good to go.
Click to expand...
Click to collapse
hi i have the same situation, you can explain how you repaired?

mago988 said:
hi i have the same situation, you can explain how you repaired?
Click to expand...
Click to collapse
Does your phone turn on and boots into fastboot?

Could you explain how you did this I can boot into fastboot and get into recovery mode

dark_prince said:
You are a freaking lucky guy then. My Le Pro 3 didn't live up any LED light after constant charging for 3 straight days. (Eventhough it went dead at about 85% battery)
Click to expand...
Click to collapse
im in the same situation u were in how did u fix ur phone.

BIGg- said:
im in the same situation u were in how did u fix ur phone.
Click to expand...
Click to collapse
Couldnt fix it. Flashing the rom back to stock via the qdloader mode doesnt work and it always fails when its writing system partition. I guess the cheap price of this device is set from the 3rd-class electronics manufacturing process.
I have given up until i get a windows xp/windows 7 system with usb 2.0 ports then i will try reflashing it one last time or give it to my daughter as a shiny new toy with no life.

OP2 Powers ON Automatically into Recovery

Hello Fellows,
First I'd like to explain my situation in details.
my phone fell while i was walking on the street and it got some dirt on it, so ( foolishly ) I decided to clean it.... and yeah... i washed my phone like washing a dish... i like rinsed the phone in water and in other cleaning liquids for no more than 3 seconds it was all quick thingy... anyway after washing it.... i directly powered it ON and it powered but the screen was OFF ( so i decided to power it OFF, solder it and to remove any clues of water inside on the board or something... after that i used a hairdryer ( which is not recommended ) but i used it at a descent distance so that no harm would be caused to the board... as i was only subjecting air to let water if any existed to dry..
i put the phone in rise and kept it for 1 day... after 1 day i wanted to check out how stuff went.. so i powered it ON and the screen actually turned ON and the vibrator, even the hardware back-light lighted up perfectly but here's the problem I'm facing.
the phone only boots into TWRP 3.1.0.0 no matter what i do.. things i tried:
1- flashed some ROM, through TWRP
2- used "Fixed Contexts" in TWRP
3- Repair File System "System partition" through TWRP
4- used file manager inside TWRP and checked if the internal storage is working and indeed i can show all my files, through TWRP
5- also used the file manager to access "System" Partition and everything was there, through TWRP
6- change File System into EXT4 "System partition" through TWRP
7- Resize File System "System partition" through TWRP
8- Wiping all Partitions "Excluding the internal storage"
and NON WORKED..
note that whenever i attempt to flash a ROM the result shows successful with no errors ..
so whats the problem in here?
i have a guess but i need help in order to apply it.. i think the VOL- is pressed and stuck somehow Electrically on the board ( but no physically as i can press the volume down and hear its tap or whatever you call it.. i even managed to boot into fast-boot and it worked.
is there anyway i can disable the vol- button temporary to see if its causing the problem?
the only thing is i cant see my ROM booting... not even the boot animation showing... just the boot-loader and automatically it goes into the recovery
also i have kernel log attached below followed by the recovery log
EDIT: i also forgot to mention that my PC recognize the phone and i have access to my internal storage.. no problems with transfer speed as well
after tons of attempts and searching online and flashing stuff and blablabla... (i flashed every recovery image op2 support )
FINALLY
I found the solution my self, and everything is back to normal...
the phone was stuck at the early stage of the booting process and maybe couldn't find the boot image in order to boot up the android OS, so all i did was i plugged in the phone into the PC, i started everything in fastboot mode on phone and on PC then i just sent the following command to my phone.
Code:
fastboot continue
fastboot then(meaning after the command) wasnt able to recognize the phone anymore so i knew that its now trying to search for partitions other than recovery.. i waited like 10 seconds and booom it booted into the best ROM i've ever used ( and actually missed ) which is Official RR from our great maintainer "nicesoni_ash"
P.S: the vol- as i said was really stuck and i noticed it not working while on RR ROM, so i just clicked it many times and tried mixing vol+ with vol- .. after many many attempts vol- worked and i then rebooted to make sure if everything is back to normal and no recovery auto boots and indeed it smoothly booted up :laugh:
thanks a lot for all who tried to help out in here or on oneplus forums :highfive:
#back_to_resurrect_and_will_always_remix

Did you try reverting to stock ?
Try getting files from here..
https://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863

I would consider it as bricked, after all attempts failed and go with the unbrick guide here on xda or oneplus forums, maybe this way it can be ressurected.
You probably have already backed up your data..
Damn, that hurts..

mithu.creative said:
Did you try reverting to stock ?
Try getting files from here..
https://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
Click to expand...
Click to collapse
sorry for this late reply but yes i have tried flashing every ROM from stock to Custom ones even i flashed EVERY SINGLE RECOVERY IMAGE OUR PHONE SUPPORTS XD and non worked... first aid.. qualcomm toolkit... non...

hello bro, i updated a magisk module v4android and when i reboot, it boots up in twrp. and since then it keeps booting into twrp. So, i used fastboot continue and when it boot int the home i deleted that module.
but fastboot continue only works once. After that if i switch-off and switch-on the phone, it goes into twrp. it needs fastboot continue everytime.
please provide me a permanent solution. few other users are facing this too. plz reply i'm waiting.

Hey,
with the help of some others in a Discord server (thanks @thesanjayp#6251 on discord) i managed to find the issue. Appearantly there was a change in /dev/block/bootdevice/by-name/misc for some reason. There was a similar problem on the old LG Optimus G Pro which i owned, so i remembered this.
As I'm not sure if we can just wipe the partition or not, i got a working misc.img attached.
In any terminal (adb shell, twrp terminal or an terminal app in a rom) make sure you have su rights, and then execute the following command:
Code:
dd if=/path/to/misc.img of=/dev/block/bootdevice/by-name/misc
Make sure to adapt the path to the misc.img though to the location you saved it to.
The misc.img I used is attached to this post.
PS: Im not responsible for any broken phones if this didnt work for you.