Related
Hey Guys
So one of the biggest questions I have seen in the last couple weeks since the Rogers captivate was released is how to root. I figured I would write a nice tutorial for everyone to make it easier!
Method 1: SuperOneClick
This is the easiest way, however most people have not been able to achieve root using this. Try this first if no luck move to method 2. Instructions on how to root using SuperOneClick can be found here
Method 2: Manual Root using ADB and Terminal
This one takes more time and not as easy to do as you have to do everything manually. But haven't heard of any problems with it yet
Step 1: Install <PDANet> Drivers. Just download the file and install. Select Samsung drivers. No need to actually install PDAnet on the Captivate you just need the drivers from the install. Follow the instructions with the installer to properly install the drivers.
Step 2: Download <Andriod SDK>.
- Extract the Android SDK .Zip file to C:\AndroidSDK (this should name the new folder created AndroidSDK in the C directory.
- Go to your start menu and search cmd or click run and type in cmd to open command prompt
- Type the following into command prompt, hitting enter at the end of each line
cd C:\AndroidSKD\Tools
adb devices
- You should see a serial number pop up. This is the serial number of your phone. This means ADB is set up
Step 3: Download <RageagainsttheCage Rooting Files>
- Extract them to the c:\AndroidSDK\tools\ folder. HAS TO BE IN THIS FOLDER FOR THE FOLLOWING COMMANDS TO WORK
Step 4: Unplug phone if it is plugged in. Then, on the phone, go to Settings > Applications > Development and make sure USB Debugging is Checked ON.
Step 5: Plug phone back in to computer. Make sure SD are not mounted
Step 6: Reopen Command prompt if not open. In the command prompt enter the following, pressing enter at the end of each line
cd c:\androidsdk\tools\
adb devices
adb push Superuser.apk /sdcard/
adb push su /sdcard/
adb push rageagainstthecage-arm5.bin /data/local/tmp/
adb shell chmod 0755 /data/local/tmp/rageagainstthecage-arm5.bin
Step 7: On the phone, go to Marketplace and download Terminal Emulator
Step 8: Leaving the phone plugged in, open the Terminal Emulator on the phone. Type the following, pressing enter at the end of each line
cd /data/local/tmp
./rageagainstthecage-arm5.bin
Step 9: WAIT. It will take a full minutes for the rage root to install. When finished you will see "Forked Childs". DO NOT DO ANYTHING TILL YOU SEE THIS. Terminal will allow you to type as it goes back to $ while it is installing BUUT DO NOT DO ANYTHING JUST WAIT(Cannot stress this enough)
Step 10: once "Forked Childs" appears, exit the Terminal App, and then reopen it. Instead of $ you should now see #. If not redo Step 7. Otherwise continue.
Step 11: Type the following hitting enter at the end
cat /proc/mounts
This should bring up a list (Easiest to view in landscape mode. Look for the following
/dev/block/XXXXXXXXXX /system YYYY ro 0 0 (the XXXXXXXXX part should be different depending on which device you have. The YYYY part will either be; ext2, ext3 or yaffs2 or something similar. )
My YYYY was rtf , not sure if it will be the same for everyone (though i assume it is)
Step 12: Now in the terminal window, using the info from above, enter the following, hitting enter at the end of each line (Be sure to enter spaces where needed as below)
mount -o rw,remount -t YYYY /dev/block/XXXXXXXXXX /system
cat /sdcard/Superuser.apk > /system/app/Superuser.apk
cat /sdcard/su > /system/bin/su
chmod 4755 /system/bin/su
mount -o ro,remount -t YYYY /dev/block/XXXXXXXXXX /system
exit
Step 13: Close terminal window if still open. Check your app drawer and, assuming everything was completed properly, you should see Superuser. If not redo Step 12, again watching for spaces and using the correct info from Step 11.
ACKNOWLEDGEMENTS
I, in no way shape or form, came up with the above method or tools. This method was modified from and composed from the method decribed over at Theunlockr.com for ease of use and to root the Captivate specifically. I big thanks go out to those guys!
ORINGAL LINK CAN BE FOUND HERE
WARNING
I am not responsible for any damage doone to the phone or its file system as a result of this tutorial. It is for educational purposes only. You have been warned!
THANK YOU!
No other method was working for me (not SuperOneClick, not these ADB instructions). Sure enough, using Terminal Emulator, I was able to get #. I wasn't able get this through adb, nor was I through SuperOneClick (infinite loop @ "mount" command).
I noticed a few things:
-When I compared filesizes from your provided Rage Root files, to the ones that were included in this thread (which also come with SuperOneClick—and which I was unable to get working), I noticed major differences. This gave me hope!, as I'd tried everything else that I knew how to prior to this point.
-My "XXXXXXXXXX" was actually only 4 characters: "stl6".
-My "YYYY" was only 3 characters ("rfs").
-SuperUser showed up on my applist without even requiring a reboot.
THANKS AGAIN
I shall now attempt to apply a lagfix; I will report back with results.
--Bah: no luck. RyanZA's OCLF V2.2+ returns error:
Could not mount /dev/block/mmcblk0p2 onto /dbdata/rfsdata: mount: No such file or directory
--OCLF V1+ returns error:
Could not create /data/linux.ex2 - dd: can't open '/data/linux.ex2': Permission denied
Uh-oh.
PhrProfess said:
THANK YOU!
No other method was working for me (not SuperOneClick, not ). Sure enough, using Terminal Emulator, I was able to get #. I wasn't able get this through adb, nor was I through SuperOneClick (infinite loop @ "mount" command).
I noticed a few things:
-When I compared filesizes from your provided Rage Root files, to the ones that were included in this thread[/url] (which also come with SuperOneClick—and which I was unable to get working), I noticed major differences. This gave me hope!, as I'd tried everything else that I knew how to prior to this point.
-My "XXXXXXXXXX" was actually only 4 characters: "stl6".
-My "YYYY" was only 3 characters ("rfs").
-SuperUser showed up on my applist without even requiring a reboot.
THANKS AGAIN
I shall now attempt to apply a lagfix; I will report back with results.
--Bah: no luck. RyanZA's OCLF V2.2+ returns error:
Could not mount /dev/block/mmcblk0p2 onto /dbdata/rfsdata: mount: No such file or directory
--OCLF V1+ returns error:
Could not create /data/linux.ex2 - dd: can't open '/data/linux.ex2': Permission denied
Uh-oh.
Click to expand...
Click to collapse
Yup same problem here. I was able to root it manually a few days ago, but have as of yet been unable to lag fix it.
Strange. After I rooted I had no problem using RyanZa's Lagfix. Your still using the stock rom after rooted correct?
deacfire said:
Strange. After I rooted I had no problem using RyanZa's Lagfix. Your still using the stock rom after rooted correct?
Click to expand...
Click to collapse
Correct. I've tested out quite a few apps from the market, though.
When I mount my device, I notice that there are some files on my internal SDCard:
-su
-Superuser.apk
-nv_data.bin
-busybox (why is this there, I uninstalled that)
-update.zip
...and some folders:
-layar
-twc-cache
-Android -» data -» com.cooliris.media
-Android -» data -» com.google.android.apps.maps
-svox
...These all have subdirectories.
Not knowing what a default internal SD directory ought to look like, I wonder: Could any of these be causing a conflict? I read that some said not to have any apps installed on the SDCard while trying to mess around (with ROMs, I think), so I tried removing what I could, and then rebooting (and some folders respawned), and reapplying the fix—no dice. I've since replaced all of the folders and the files.
Stock rom here as well.
Hrmm not quite sure why lag fix isn't working for you guys. Just a quick question, in RyanZa One Click, is "Un-Root Device" green?
I still have no problems applying RyanZa Lag Fix to my Captivate as I had to redo it last night after i switched back to the Rogers stock rom after testing Cog 2.2. My guess, and it is just a guess, is that the root never applied properly. Have you tried rerooting the device?
deacfire said:
Hrmm not quite sure why lag fix isn't working for you guys. Just a quick question, in RyanZa One Click, is "Un-Root Device" green?
I still have no problems applying RyanZa Lag Fix to my Captivate as I had to redo it last night after i switched back to the Rogers stock rom after testing Cog 2.2. My guess, and it is just a guess, is that the root never applied properly. Have you tried rerooting the device?
Click to expand...
Click to collapse
Thought I might give you some info as well since i've been messing with mine for about a week now. I was able to root the device, oneclick did not work originally for this and I used ADB method similar to what you had here. After this I went for the lag fix, everything was green like it was supposed to be, installed the ext2 tools no problem and then get the same error about unable to mount when applying lag fix.
At this point I used OCLF to unroot the device and it did, I then used the oneclick to re-root which it did this time, in terminal I can su properly and again all the tools are green in OCLF. Tried to lagfix and failed again so I started making some changes manually based on the error messages that were out put. Created the folder it was trying to mount to for instance and then set the permission to this to 777 that would allow world write access, this allowed it to create the new partition in ext2 but when mounting the loopback device it fails saying it doesn't exist (which it doesn't I looked) so while I did get a bit further the lag fix still fails. I would gladly apply the lag fix manually through the terminal if I knew everything that was being done to re-format the partitions for ext3 but I can't seem to find that info anywhere.
Next best thing I would guess is to install a stock rom from rogers from someone else and see if there are any differences, I'm guessing based on the devices in the /dev folder that there are more then one image on the devices some set up more similar to AT&T that the lag fix will work on.
mrprefect said:
Thought I might give you some info as well since i've been messing with mine for about a week now. I was able to root the device, oneclick did not work originally for this and I used ADB method similar to what you had here. After this I went for the lag fix, everything was green like it was supposed to be, installed the ext2 tools no problem and then get the same error about unable to mount when applying lag fix.
At this point I used OCLF to unroot the device and it did, I then used the oneclick to re-root which it did this time, in terminal I can su properly and again all the tools are green in OCLF. Tried to lagfix and failed again so I started making some changes manually based on the error messages that were out put. Created the folder it was trying to mount to for instance and then set the permission to this to 777 that would allow world write access, this allowed it to create the new partition in ext2 but when mounting the loopback device it fails saying it doesn't exist (which it doesn't I looked) so while I did get a bit further the lag fix still fails. I would gladly apply the lag fix manually through the terminal if I knew everything that was being done to re-format the partitions for ext3 but I can't seem to find that info anywhere.
Next best thing I would guess is to install a stock rom from rogers from someone else and see if there are any differences, I'm guessing based on the devices in the /dev folder that there are more then one image on the devices some set up more similar to AT&T that the lag fix will work on.
Click to expand...
Click to collapse
Try the stock rom in the main Rogers Captivate forum. It is one i used to go from Cog 2.2 back to stock and it applied the root and lag fix without a hitch. Give it a try and let us know!
deacfire said:
Try the stock rom in the main Rogers Captivate forum. It is one i used to go from Cog 2.2 back to stock and it applied the root and lag fix without a hitch. Give it a try and let us know!
Click to expand...
Click to collapse
Happen to have a link right to the forum? so many threads to search through...
I'm new to the whole android thing though I've been working with linux for years but its a bit of a learning curve coming from a blackberry.
also what are you using to flash your device?
I'm having the same problem. Let me know if you somehow fix it.
Sent from my SAMSUNG-SGH-I896 using XDA App
I was finally able to get my last night.
Turns out my first root attempt was a failure. I had to unroot via an update.zip method as i did not have the permissions to remove the files from terminal.
Once unrooted i then did the update.zip method for the I897, and modified the script to look for I896 instead. It worked flawlessley. I am now getting the pop-up asking for root permissions. I had never seen it work previously.
I was then able to install OCLF without any problems. (and it popped up asking for root)
I am now rooted and lag fixed. Previous quadrant score was at 860's and i pulled a 2285 last night after the OCLF.
Can you please tell us how to modify script and how to flash back to stock..I need to return my phone and superuse app wont go away after unrooting and factory reset
inningsdefeat500 said:
Can you please tell us how to modify script and how to flash back to stock..I need to return my phone and superuser app wont go away after unrooting and factory reset
Click to expand...
Click to collapse
Well i cannot help you flash back to stock as i don't quite know how to do that yet myself. But i can help you unroot, re-root, and lag fix.
I have found the files again and uploaded them to rapid share with the necessary modifications.
Download THIS FILE and once downloaded, rename it to update.zip Be careful not to name it update.zip.zip by accident.
Place the file into the root of your sdcard.
Shutdown the phone with the power button, or pull the battery out and put it back in.
Enter recovery mode:
While holding the volume up and volume down buttons press and hold the power button until you see the white text that says SGH-I896, then release the power button only.
When in recovery mode use the volume down key to highlight reinstall packages, then press the power button. It should say completed and reboot the phone.
Once the phone has rebooted, do the exact same thing again, only use THIS FILE instead. Dont forget to rename the file again!
Then install the OCLF from market. Install the EXT2 tools first. Then run the lag fix installer.
I assume you already know how to enter recovery mode, but this way someone else searching for a fix will have all the info at their disposal here.
EDIT!!!
Some mirrors for the files
For the UN-Root files go HERE
For the ROOT files go HERE
Hi all i am very lost here....i have tried for hours the last few days on how to root this i896 with the super one click method with no luck....anyways i was speaking to my brother earlier and he has done it with his bell vibrant no problem....anyways what i want to know is what is the purpose of rootindg the phone? I thought it was for downloading 3rd party apps or whats the purpose for superuser? The reason why i am asking is that i can download 3rd party apps already...i allow them on my application settings and download a app downloader and works fine? Im lost someone please help.
Sent from my SAMSUNG-SGH-I896 using XDA App
dandroid123 said:
Hi all i am very lost here....i have tried for hours the last few days on how to root this i896 with the super one click method with no luck....anyways i was speaking to my brother earlier and he has done it with his bell vibrant no problem....anyways what i want to know is what is the purpose of rootindg the phone? I thought it was for downloading 3rd party apps or whats the purpose for superuser? The reason why i am asking is that i can download 3rd party apps already...i allow them on my application settings and download a app downloader and works fine? Im lost someone please help.
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
Take a look here. It answered alot of my questions.
http://www.androidcentral.com/rooting-it-me-some-qa
Also, if you only follow the second half of my post above you should be able to root it as well.
Thanks deacfire! The one click wouldn't work for me but the second method did.
I am having a really annoying problem though. The superuser.apk that you included just gave me a black screen. So I updated it to this one: http://forum.xda-developers.com/showthread.php?t=682828&highlight=no+apps+in+list
Which is newer. But now it just says "no apps in list". Tried installing it from the zip, tried from the market no different.
I do have apps that require superuser: ROM Manager, Root Explorer, Adfree. They all work, also have titanium backup but its is telling me it needs root access.
How can I fix this, it is a major issue.
EDIT:Thanks impulser91!! That work and was SUPER easy! Should probably get posted in the original post.
when i copy update.zip into the /sdcard and then try hitting reinstall packages, it results in an error and aborts. any suggestions?
Nevermind....it worked MUAHAHAHAHAHAH LET THE FUN BEGIN!
Sweet, 2 users. Not bad for under 10 posts
I'm glad its working for others. I had one heck of a time finding the right combination of files and process's for the I896. I am an IT professional and it took me a few days of fumbling around all the I896 and I897 posts.
Anyways, glad to hear it worked, and i hope other people find it useful as well. I will keep the originals, so if the links go down someone just PM me and i will load them somewhere else.
impulser91 said:
Well i cannot help you flash back to stock as i don't quite know how to do that yet myself. But i can help you unroot, re-root, and lag fix.
I have found the files again and uploaded them to rapid share with the necessary modifications.
Download and once downloaded, rename it to update.zip Be careful not to name it update.zip.zip by accident.
Place the file into the root of your sdcard.
Shutdown the phone with the power button, or pull the battery out and put it back in.
Enter recovery mode:
While holding the volume up and volume down buttons press and hold the power button until you see the white text that says SGH-I896, then release the power button only.
When in recovery mode use the volume down key to highlight reinstall packages, then press the power button. It should say completed and reboot the phone.
Once the phone has rebooted, do the exact same thing again, only use THIS FILE instead. Dont forget to rename the file again!
Then install the OCLF from market. Install the EXT2 tools first. Then run the lag fix installer.
I assume you already know how to enter recovery mode, but this way someone else searching for a fix will have all the info at their disposal here.
Click to expand...
Click to collapse
I could just about kiss you.... but I won't
Thanks for the update files they worked like a charm. I had a similar issue where the device didn't seem to be properly rooted, though it didn't give me any issues with most things when applying the lagfix it would die.
applied both your unroot and then root and it worked flawlessly the first time, lagfix then ran with no issues and my quadrant scores are 2250 now.
Not sure what you did exactly, I've tried rooting from update.zip from oneclick and neither worked I ended up rooting with the ADB and though it seemed to work it apparently did not.
Thanks again
Hoping for some help because I've ran into some really odd issues with SuperUser/root on my TF101.
I used the guide in the Dev Forum and flashed to Prime 1.4, everything was great and working well. I made a Nandroid of my base to fall back on.
ChainsDD updated SuperUser on 6/10 or 6/11 and I accepted the update from the market. When I launched SU, I was prompted to update the Binary, I granted SU root access and it said it completed. However, since then, no app that requires root has requested SU according to the log and Kernel Manager is telling me I don't have root.
If I open Terminal Emulator, it is automatically at a # rather than a $
In Root Explorer, tapping the Mount R/W button changes to R/O and I was able to successfully create and delete a test folder in /system
I need to get SuperUser functioning again, any thoughts or ideas?
What's a TF104 model device?
Um. you do know that # in terminal emulator indicates that the app currently has root access?
Open superuser, its being recognized as permanent root because you allowed it to have root access.
And its TF101 not TF104.
Sorry, misread the model...
I know the # means root that's why the title is kinda lost root...
I'm not getting any of the notifications that SuperUser granted access, like I used to. Also, Kernel Manager isn't being granted Root access when I launch it
I think the SuperUser binary update failed, I got the binary from goo-inside.me and flashed it from CWM. Then I cleared the SuperUser app data and launched it. I was again prompted to update the binary version. It failed and prompted me to to flash a zip that it downloaded to my SD card. That zip is a 0kb file.
Try downloading superuser from the market.
david279 said:
Try downloading superuser from the market.
Click to expand...
Click to collapse
Same results
Also, Superuser is now randomly Force Closing on launch.
Talked with ChainsDD, it's a problem with how he compiled Super User for honeycomb. Fix will be released tomorrow.
Sent from my gginggerfied EVO
Fixed binary has been posted to goo-inside.me
Sent from my gginggerfied EVO
Hi all!
First off, I'm new to xda Developers so please excuse me if this is in the wrong forum! I thought I'd post information about a tool I wrote here which roots stock 4.0.3 leak on the A500, A501 and assumingly the A200 too. Its literally one click - just enable USB debugging. "ICS Root" also installs, optionally, FaceLock and Trebuchet (although FaceLock doesn't want to work. It lets you set it up though =P)
Since version 5.0.1 this also now works with the new 0.022.00 leak!
The full post is over at TegraOwners: http://forum.tegraowners.com/viewtopic.php?f=30&t=350
The only real system requirements are Windows (with .Net Framework 4) and an Iconia on the stock 4.0.3 leak. I hope somebody finds this useful its been tested by myself and a couple of TegraOwners users and it works well.
In terms of the technique used, it uses the great Jay Freeman's mempodroid exploit to gain root at which point it mounts /system rw and installs su, busybox and Superuser.apk so no real surprises there. Installing Trebuchet adds that apk to /system/app and installing FaceLock installs the apk to /system/app before installing the pittpatt folder to the flexrom (mounted as /system/vendor). I plan to open source it when all the requested features have been implemented and the code has been cleaned up.
Thanks!
~blackthund3r
EDIT 14/05/2012: ICS Root 7 is out enjoy!
Sent from my A500 using Tapatalk
cwm version?
why would it not work with cwm version?
With this tool does system remain writeable after rooting?
What about flashing CWM with acer recovery installer once rooted? I guess it would screw the bootloader...
lowsum said:
What about flashing CWM with acer recovery installer once rooted? I guess it would screw the bootloader...
Click to expand...
Click to collapse
If you are on the cwm with the HC boot loader it should work as Its Magic will be run..
if you are on the new boot loader as in the full non modded leak.. It will give you secure boot error ..
The new boot loader Blocks its magic.
Thanks
Hey this worked easy. I had to re-install USB drivers and make sure I had the latest from Google. Other then that, hit the button, wait about 1.5 minutes, and it rebooted! No problems thus far! Thanks Again!
JeanBubu said:
why would it not work with cwm version?
Click to expand...
Click to collapse
It would but the cwm one, afaik, is prerooted?
Sent from my A500 using Tapatalk
root doesnt work like its supposed to. i know its only half root due to the bootloader, but terminal emulator flat out says i'm not rooted after this despite sixasis working and titanium backup/root checker both saying i have root and busybox. i'm going to post this on TO as well for you incase you dont check here often.
nifterific said:
root doesnt work like its supposed to. i know its only half root due to the bootloader, but terminal emulator flat out says i'm not rooted after this despite sixasis working and titanium backup/root checker both saying i have root and busybox. i'm going to post this on TO as well for you incase you dont check here often.
Click to expand...
Click to collapse
That's storage cos terminal works for me and running su in an adb shell works great too.
Code:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ su
# exit
[email protected]:/ $ su
#
Sent from my A500 using Tapatalk
SteamBishop said:
Hey this worked easy. I had to re-install USB drivers and make sure I had the latest from Google. Other then that, hit the button, wait about 1.5 minutes, and it rebooted! No problems thus far! Thanks Again!
Click to expand...
Click to collapse
You're welcome and I'm glad it worked!
Sent from my A500 using Tapatalk
After reading the other post, I have found that I cannot write to the system directory from the device itself. The folder attributes indicate that it is set to write, however File Explorer HD will not let me. I have tried to create a folder in the /system and it will not accept the addition. The strange thing is that Root Check says it is rooted, File Explorer HD accepts putting it into Root Explore, but that is it. It is odd. I will try to reapply the Root to see if that makes a difference.
SteamBishop said:
After reading the other post, I have found that I cannot write to the system directory from the device itself. The folder attributes indicate that it is set to write, however File Explorer HD will not let me. I have tried to create a folder in the /system and it will not accept the addition. The strange thing is that Root Check says it is rooted, File Explorer HD accepts putting it into Root Explore, but that is it. It is odd. I will try to reapply the Root to see if that makes a difference.
Click to expand...
Click to collapse
Please, read the op before bringing this up. This method is for half root, its the only way possible right now on stock leak ics. There is a special script you need to use to mpunt system. You can find it in the stock leak thread, run it in terminal or use rom toolbox and set it as a script to run at boot because rebooting loses write privileges.
nifterific said:
Please, read the op before bringing this up. This method is for half root, its the only way possible right now on stock leak ics. There is a special script you need to use to mpunt system. You can find it in the stock leak thread, run it in terminal or use rom toolbox and set it as a script to run at boot because rebooting loses write privileges.
Click to expand...
Click to collapse
Sorry for offending you and whoever else it did. Thank you for pointing that script out in that post. My intent was to offer a second comment to your assessment..
nifterific said:
Please, read the op before bringing this up. This method is for half root, its the only way possible right now on stock leak ics. There is a special script you need to use to mpunt system. You can find it in the stock leak thread, run it in terminal or use rom toolbox and set it as a script to run at boot because rebooting loses write privileges.
Click to expand...
Click to collapse
I have a better script which I'll be releasing as an update to the root app this morning hopefully. It'll be a terminal command to remount rw.
Sent from my A500 using Tapatalk
New update out!!
blackthund3r said:
I have a better script which I'll be releasing as an update to the root app this morning hopefully. It'll be a terminal command to remount rw.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Version 3 came out this morning
It features some bug fixes as well as a completely new remount menu which mounts /system rw properly on the fly. Tested with a busybox installer app
Enjoy!
Thanks for your tool blackthund3r !
I tried it with the new leak from this morning and it doesn't seem to work anymore
Edit :
Just to be a little more specific, the app says the process was OK and state that the tablet is rooted but the tablet doesn't reboot by itseld and su is not installed. I tried to install su manually but it's unable to find a previous su package on the system.
paugustin said:
Thanks for your tool blackthund3r !
I tried it with the new leak from this morning and it doesn't seem to work anymore
Edit :
Just to be a little more specific, the app says the process was OK and state that the tablet is rooted but the tablet doesn't reboot by itseld and su is not installed. I tried to install su manually but it's unable to find a previous su package on the system.
Click to expand...
Click to collapse
ah okay it appears a completely new leak has been released. It is possible that the mempodroid exploit has been patched up. I'm gonna look into it soon. I can't much tonight - I have school work. I'll see what can be done and what the differences between leaks are.
Sent from my A500 using Tapatalk
EDIT: mempodroid hasn't been patched See ICS Root v3.1
Hi blackthund3r
Thanks for the update 3.1 but could you please fix the problem on your hosting website? clicking on this file send to an error warning.
The other files can be downloaded though.
can someone post a mirror to the 3.1 version? current link is not working.
can somebody also confirm, if i root with this tool, i will be able to reinstall my clockworkmod recovery through 'acer recovery installer' and flash any other cwm rom? or do i have to downgrade to honeycomb 3.01, install iconiaroot for honeycomb and then acer recovery installer?
Gersma,
I'll be able to answer to your question as soon as I'll be able to download this tool and test it.
When apps that ask for root permissions are launched, it doesnt work, example: TI backup says that the device isnt rooted and i might have to check the SU binaries. My N7 was rooted before a update for Superuser was available, now something happen after i updated it. But i dont know what...
That's weird. After you updated your SU, did you go to SU to update its binaries?
i did that twice, and it did say to update binaries...so...
you might need SuperSu instead
What Android version are you running?
Droid_Boi86 said:
i did that twice, and it did say to update binaries...so...
Click to expand...
Click to collapse
I had similar problems with "lightly rooted" stock (4.2.1/JOP40D) using a slightly older version of Superuser. Some apps could get root and others could not. But things have been in flux recently; read on...
I poked around a little bit and it appeared that the 4.2 multi-user stuff was interfering with the way that older versions of (ChainsDD's) Superuser worked, and at that time (only a couple weeks ago) ChainsDD had not released a newer update - things were still in flux.
I switched over to SuperSU, and no problems since... but....
...for me, installation of SuperSU didn't go swimmingly. As I recall the SuperSU install instructions say something like "you need to already have root to install the SuperSU `su' binary". Makes sense as it needs to write it's 'su' binary into /system, which in turn means it needs to get root privilege from a pre-existing su/Superuser installation.
So it poses a chicken-and-egg problem if you have lost root completely which I somehow managed to do... wait, I remember now! I had left the old 'su' binary in place, but had manually uninstalled "Superuser" from /system before I attempted the SuperSU install. Doh!
If you have lost root... you can manually install SuperSU offline inside the recovery via adb & the command line, which means getting both the SuperSU.apk and the 'su' binary ahead of time.
You can get the .apk from the market. You can attempt an install - it will download the 'su' binary and (no kidding) place a copy of it in /data/data/eu.chainfire.supersu/files/superuser.png
If you haven't lost root completely inside the booted OS, I suggest mounting /system in "rw" mode prior to running the SuperSU install and startup.
It looks like I am back a version or two - I have superSU v 0.99
4d7abc0eb5898cdb81bc233dcd16e052 /system/app/SuperSU.apk
0034ec008416b1c3fa7010deb8a3a758 /system/xbin/su
-rwsr-sr-x 1 root root 91992 Jan 10 16:40 /system/xbin/su
note the setuid,setgid bits on /system/xbin/su. Also - no symlink from /system/bin/su to xbin/su.
OK, sorry for the long post. There have been new releases from both chainfire (SuperSU) and chainsDD (Superuser) quite recently. Since I haven't had any troubles since 10 January, I haven't been following it closely - YMMV.
cheers
Hello good peoples of Xda ,
I just purchased a Note 3 verizon I believe 900v on swappa It will arive in the next few day's and I want to get all my ducks in a row by that I mean aquire all the root and unlocking tools nessary for a best practices root and if nessary unlocking of my boot loader.
Goals for root are mostly to debloat the phone and hotspot mod's for no hassle teathering.
I may dip my toes into custom rom for this phone but mostly I am just looking for a clean lean experiance for my note 3. I have been pouring over the many many pages of the various rooting guids and I am just not sure witch method to use is the safest / most reliable .
thank you for your time and helpful suggestions.
This is what I have found so far.
ArabicToolApp : Root for lolipop
Odin3 v3.12.3 : flash tool is this latest ? best to use ?
Samsung usb drivers v1.5.45.0 : are these the proper drivers to install ?
You should start by figuring out which firmware release it has on it.
If it has PL1 (the newest security release, circa 2017/01/15), there will be no rooting for you... unless you manage to create a new exploit.
OB6 and OF1 - (one of) the yemen tool(s)**
NK1 - no root available ( and can't be rolled backwards w/ Odin, only NK1 or higher )
NJ6 - no root available? ( Try towelroot, or you can downgrade to NC4 using Odin )
MI9/MJ7/MJE/NC2(leak)/NC4 - Towelroot v3
For which bootloader unlock binary to use, see here.
Can't help you out with USB drivers, I don't remember what I used. afaik, they will either work 100% or not work at all, so you just need to get something working.
I've never used anything but Odin 3.0.9. Can't tell you if the version you mention is "better".
good luck
** i've never rooted OB6 or OF1, so can't give you any advice about which to use. Feel free to read the related threads. In my (casual) reading of those threads, it is nearly impossible to intuit out why some people have problems and others do not. Mostly because the reporting is not sufficiently detailed.
bftb0 said:
You should start by figuring out which firmware release it has on it.
Click to expand...
Click to collapse
Your right, after thinking about my post I realized there were 2 many variables that I need to know before I ask for help. So once I recieve the phone and if it's fully functional I will find out what firmware it has and what the cid it has and will post a follow up if I need help.
P.S thank you for the concise jist of what is and is not possible with the various firmware's.
Recieved my phone.
I got my note 3 and boy is it just a wonderful device. SM-900v running OF1 firmware, and My Cid is 15 so is all good.
procedurs completed.
I got root from useing the yemem tool.
and have tryed some debloating removed the NFL apk as a test with Tit.backup.
dissabled ota updates, I made a copy of the update.zip (that was downloaded with out me asking it too. I assume that this update.zip is the new PL4 firmware )and deleted it. renamed the fota.apk's with a .bak
not really sure if I should unlock the the bootloader I would love to have twerp.
Could anyone point me at a good debloating script ?
LOVE LOVE LOVE my note 3.
I also have a zero lemon battery/case combo on the way.
PL1 not PL4
See here. Might be dated - stuff tends to move around from release to release.
You should probably also freeze SDM.* and SysScope.* (in addition to LocalFOTA)**
There is a small permanent downside to unlocking - the blowing of the Knox Warranty Flag means that you will never be able to use Knox Secure containers, even if you did a full stock flash with Odin. Not sure how important this is to folks using the phone as a personal device (as opposed to a corporate device).
Operating with a rooted-stock device with a locked bootloader usually progresses through a customary arc - especially with new rooters, but also with experienced folks - where the user one day does some incremental mod that boot-loops the Android UI. At that point there is no means to reverse the small change. (You can't get in via "adb" as it's daemon isn't started yet, and even if it were, the fact that it is in secure mode means that you would have to have a stable UI in order to confirm the connection.) As there is no rooted secondary boot available (i.e., a custom recovery), there is no way to perform repairs, and a trip back to Odin is in store for the owner. Worse yet, a backup has never been made... so all customizations are all lost and must be re-created completely from scratch.
** this is a good idea if you unlock and install a custom recovery: (although TWRP may detect it and emasculate it automatically)
Code:
su
chmod 0000 /system/bin/install-recovery.sh
bftb0 said:
PL1 not PL4
Click to expand...
Click to collapse
Right PL1 ok.
Well I decided in for a penney in for a pound and have sucessfully unlocked my boot loader, had no issues.
my question now is how do I install twerp I have downloaded
twerp-3.0.2-0-hltevzw-4.4
and twerp 3.0.2-1-hlte.img.tar
I think I need to install the tar file.
but I don't know how. I have odin but not sure if that is the right program to use. I think I read where somone installed twerp with flashify or somthing like that.
What should I do ?
Truck'nfool said:
Right PL1 ok.
Well I decided in for a penney in for a pound and have sucessfully unlocked my boot loader, had no issues.
my question now is how do I install twerp I have downloaded
twerp-3.0.2-0-hltevzw-4.4
and twerp 3.0.2-1-hlte.img.tar
I think I need to install the tar file.
but I don't know how. I have odin but not sure if that is the right program to use. I think I read where somone installed twerp with flashify or somthing like that.
What should I do ?
Click to expand...
Click to collapse
man up and use a root prompt command line. It's a single command.
Code:
dd of=/dev/block/mmcblk0p15 if=/sdcard/twrp-3.0.2-0-hltevzw-4.4.img bs=2048
( assuming that you put the twrp .img file in the /sdcard folder. If it was in the download folder, then if=/sdcard/Download/twrp-3.0.2-0-hltevzw-4.4.img )
Note there are absolutely, positively no spaces anywhere in "mmcblk0p15". Critically important.
The above command writes a raw binary data (the .img file) to the 15th partition of the mmcblk0 device - the flash memory chip. You can do this with boot images (such as custom recoveries) or a few other binary images, but typically not with ext4 or other filesystems.
Note this command could be extremely dangerous if you made a mistake. If you were to write data someplace else it could be a permanent disaster. So cut-n-paste to be safest (without a new-line), and then double- and triple- check the command for typos before you hit the enter key.
FYI, you can see what the partition mapping is by doing a folder listing
Code:
ls -ld /dev/block/platform/*1/by-name/*
The partitioning scheme varies from android device to android device; but on the SM-N900V the recovery partition is the 15th partition. (On other devices it might be something different).
bftb0 said:
man up and use a root prompt command line. It's a single command.
dd of=/dev/block/mmcblk0p15 if=/sdcard/twrp-3.0.2-0-hltevzw-4.4.img bs=2048
Click to expand...
Click to collapse
are you talking about adb ?
So somthing like
adb shell
su
dd of=/dev/block/mmcblk0p15 if=/sdcard/twrp-3.0.2-0-hltevzw-4.4.img bs=2048
???
Truck'nfool said:
are you talking about adb ?
So somthing like
adb shell
su
dd of=/dev/block/mmcblk0p15 if=/sdcard/twrp-3.0.2-0-hltevzw-4.4.img bs=2048
???
Click to expand...
Click to collapse
That works.
Or a terminal emulator.
All you need is to put the file on your (internal, pseudo-) /sdcard, "su", and "dd".
For extra credit, make sure to compute a file checksum (e.g. "md5sum") every time you copy the original .img file to a new location and especially prior to flashing. That safeguards against a bad copy operation, crappy flash memory, etc.
Stock ROMs might not have a "md5sum" binary in /system/bin, but since you are rooted you could install a private busybox in someplace like /data/local/bin. I prefer to use a busybox which is SELinux-cognizant, e.g. v1.23.1 here as busybox_full_selinux_1.23.1.zip Note that I don't "install" this .zip so that stuff in /system/bin or /system/xbin get overwritten, but instead just keep it in a private area all on it's own.
Steps.
0) extract the "busybox" binary from the .zip file and get a copy to your SD card. Then
Code:
su
mkdir -p /data/local/bin
chmod 755 /data/local/bin
cp /sdcard/busybox /data/local/bin/
chmod 755 /data/local/bin/busybox
cd /data/local/bin
./busybox --install -s /data/local/bin
This allows it to be used as needed in a terminal/console shell.
e.g. using ls
1) Explicitly: /data/local/bin/ls -lZ *
2) Implicitly "as a last resort":
export PATH="${PATH}"':/data/local/bin'
ls -lZ *
3) Implicitly "as preferred":
export PATH='/data/local/bin:'"${PATH}"
ls -lZ *
I am now have root, unlocked bootloader and twrp Whoot!!
Well I now have twrp installed thank you vary much for all your help and direction I sincerly appreciate your assistance.
I installed termux and after updating the packages sucessfully used dd to install twrp.
1st thing I am going to do a full system backup.
No developer love for N900V not good