Not too important but lately my volume down button needs a little more pushing to function.Did anyone encounter this?If yes is there anything i can simply do.If not it's ok.
Thanks in advance.
Typically problems like this occur through use on every phone with hard buttons. For example, my back button is almost completely depressed all the time. For the most part, I don't think you can fix this, short of manually opening up your phone.
Sent from my Sapphire/dream using XDA App
Related
Couple of days ago I noticed that my DHD's volume down button does'nt work anymore. First I didn't pay attention, thought that after restart it will be solved, but it didn't. The volume down function doesn't work in any software (up works just fine). Before I decide to go to warranty, what do you think, is it a software or hardware problem? There is no accidents or any damages happened, I know and physically the button seems to work. Please help!
Normally buttons are hardware, in your case its easy to tell.
remove the battery. Put it back in. Hold down the volume down then turn on the phone, if it starts normally your button is dead, if you get into bootloader mode it could be software and you should try reflash or wipe in settings
Sent from my Desire HD using XDA Premium App
Im the same, except now my volume up doesnt work either
Sent from my Desire HD using XDA App
Thank you so much Blackhorse!
Although the first try didn't succeed (perhaps I didn't hold both volume down and power button long enough), the second try started the bootloader and I was able to use both volume buttons. After another boot the stock rom started normally and now my volume down function is back! Hopefully it stays so...
Hey guys,
My volume keys have died. Part of the wire strip that is connect to the buttons is torn.
Any ideas if there is a replacement upperboard yet?
having the same issue... going to try blackhorse's solution and see if it works
best regard
André
unfortunately it didn't work. I guess the volue down button is dead, even though I had absolutely no accidents with it.
does anybody have an idea of how to solve this, since I live in Brazil, but bought DHD in Germany?
any help would be very appreciated
best regards
André
same problem here, my buttons stop working. What I usually do then is lift the volume keys up slightly and slide some paper underneath to clean some dust and then usually it works again (for a while)
I got my HD2 Used so i dont know how button is supposed to be. Is there supposed to be a click to it?
Mine end button 'clicks', as do all the others apart from the back button. However, as long as the button still functions, I'm not too worried
But in answer to your question, I believe that all hardware buttons should 'click' when pressed on our HD2's...
Sent from my HTC HD2 using XDA App
since yesterday, i have this nasty problem with my touchscreen. when i press the power button to wake the phone, or to get into the power-menu, the touchscreen stops working. this does no happen if i press any other button.
sometimes, i can use the phone again if i wait until the screen turns off and then wake it up by pressing any other button, but most of the time i need to pull out the battery and restart the phone. even when i pull out the battery, the screen won't work sometimes, and i have to restart the phone again.
when i first experienced this problem, i was using the nexushd2 v2.0 rom, i then updated to the v2.1, which didn't help. i tried reinstalling the rom, wiping the /data/ , the cache and the dalvik cache (multiple times) and eventually changed to the typhoon cm7 rom (with repartitioning and reinstalling the magldr), the problem is still there.
the phone did never get wet, fall down, or anything the like. pulling out the sd card makes no difference.
i hope someone can help me there
May be it´s a hardware problem, some HD2 have it.
You can test it, if you go back to windows.
its the good old digitizer its right under the power button press the end button hard and it should work again but if you press it again it will corrupt use softkey or remap your hardware buttons
http://forum.xda-developers.com/search.php?searchid=22866591
Kameirus said:
http://forum.xda-developers.com/search.php?searchid=22866591
Click to expand...
Click to collapse
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Nigeldg said:
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Click to expand...
Click to collapse
lol
i have the same problem with the endkey but with the rom in my sig
it actually has a softkey button that can be setup with a power softkey ..longpress on the softkey and it pulls up the power menu
just like it would do if you used the hardware power button
Yeah I thought there were softkey power buttons but I wasn't sure and I'm on my phone so couldn't be arsed to search
Sent from my HTC HD2 using XDA
Kameirus said:
link that doesn't work anymore
Click to expand...
Click to collapse
Nigeldg said:
many words
Click to expand...
Click to collapse
well, sorry dunno why i didn't search the forum before
pressing the power button hard worked , but i think i'll keep using soft buttons and wake the device pressing any other button (i don't think the brute force method is a good idea as i want to keep my phone some time longer )
Touch Screen Problem in HTC HD2
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
nrvjain said:
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
Click to expand...
Click to collapse
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Exactly, the same issue started to happen yesterday!!!
mwuahjaan said:
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Click to expand...
Click to collapse
I tried changing the metal strip too. But it still the same. Doesn't work.
Sent from my GT-N7100 using Tapatalk 2
When I press the home key it doesnt always work. i noticed that if i press it lightly (as much as I used to on the S2) It doesnt work, it still clicks in but its only if I press it a little harder that it actually functions. Does anyone else have this problem or is it just me ans I need to get used to give it a good old press each time?
I can't press mine so light.. It's pretty stiff so when it moves it moves and always works
Sent from my GT-I9300 using xda premium
mine is working normally. One click press tha'ts it no hard press required. Maybe it's better to check other functions as well in the phone and return the piece. coz i have seen many SIII pieces had hardware problems. i actually had a same problem but with power button and i returned my SIII and got a new one from phones4u Now everything is working perfect. Hope that helps.::
Hey guys.
Ive been having a lot of trouble with my power button. At first it became less responsive (Having to push the button 2-3 times to activate the screen).
Now it seems like it is not working at all (Having to push 6-7 times).
Anyone seen this problem before and knows of a way to fix it?
Or does anyone know a workaround? (Like using the search button to act like the power button perhaps?)
Thanks in advance.
I don't really have any suggestions on how to fix the power button itself, but I do have a few workarounds if you're interested
The first is Smart Screen ON. This app was featured on the main portal not too long ago, and I have to say, it works quite well. It uses the proximity sensor to turn the screen on and (optionally) off. In the span of two weeks, it's saved my phone over 2000 power button presses (the app keeps track). I have been running the app 24/7 since I installed it and have not noticed any impact on battery life. I'd say it's worth a try.
As an alternative, you may have some luck with ButtonRemapper (requires root). It should let you remap the search button like you had wanted. You could just edit the keyboard files directly, but this app makes it pretty simple. : )
Also, in case you didn't know, the home button will wake the phone by default, but it obviously doesn't turn the screen back off.
Aightu said:
Hey guys.
Ive been having a lot of trouble with my power button. At first it became less responsive (Having to push the button 2-3 times to activate the screen).
Now it seems like it is not working at all (Having to push 6-7 times).
Anyone seen this problem before and knows of a way to fix it?
Or does anyone know a workaround? (Like using the search button to act like the power button perhaps?)
Thanks in advance.
Click to expand...
Click to collapse
Happens to me, i just got a wooden splint, cleaned the inside, sucked it out (the dirt) & banged it a few times, now works like a charm
Sent from my R800i using xda premium
Same thing with me mine is fully broken my work around is download button rempaper and I have made the search button act as the power button.
This is great but to turn my phone on I have to plug it into a charger and launch into Cwm then click reboot phone.
Sent from my R800i using xda premium
clewis said:
Same thing with me mine is fully broken my work around is download button rempaper and I have made the search button act as the power button.
This is great but to turn my phone on I have to plug it into a charger and launch into Cwm then click reboot phone.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Thats what im trying to avoid.
What program did you use to remap the button?
Thanks for the info man!
Yeah it's a ***** how the phone only lasts a year before it starts breaking but glad i can get rid of it in 2 months.
I use ButtonRemapper, i take it you have root access so just download the .APK i have attached and its pretty simple just find the search key in the app and change it so it acts like the power button (It's simply you will get it when you open the app). Once you have done that the phone works fine when in normal use you just gotta tap the search button not the power button.
But as my power button is fully broken im not sure if the power button works if the phone turns off. So my work around is plug the charger in then when you see the sony logo keep taping the volume down until you launch in CWM and then just tap reboot now and it will boot up, hope this helps.
It's the only work around without having to spend money i could think off, so defiantly a good temp fix.
Yeah i think the build quality of this device isnt what it could've been. Although im happy the screen hasnt broken yet.
Thanks for the APK!
You can just use the hone button to wake the screen. Give the power button a break
Sent from my R800i using xda app-developers app
Kadesh45 said:
You can just use the hone button to wake the screen. Give the power button a break
Click to expand...
Click to collapse
Yeah im doing that and using the search button to sleep the screen.
This way i hope it wont die on me for another year