Database Users

Grey Screen (NO REACTION) - Please help me out guys

Hey guys...
So, I have my Desire Z since about 4 weeks and nothing went wrong with it.
Really NOTHING bad happened, it didn't fall on the floor, didn't fall into water, etc etc.
So this afternoon I unlocked it and suddenly I got a blank grey screen.(worked perfect in the morning) The phone did react to my power up/on button, but I couldn't see what I was doing. Also the touchscreen worked, because I could unlock it (I heard the unlock noise) but I only get a blank grey screen.
I tried Bootloader and Battery pull. Also I took out my SD/SIM/Battery and just blow through the whole phone but nothing want to happen:-(
By the way, my phone is fully rooted and running on Cyanogenmod7 since 5 days. Everything worked perfect until this afternoon...
EDIT:
Looks just like this http://i51.photobucket.com/albums/f368/forthcomingtangent/DSCI1196.jpg

C'mon guys:-(

So is it grey from bootup till it gets to the rom or can you see your boot splash screen and whatnot?

HAK Devil said:
So is it grey from bootup till it gets to the rom or can you see your boot splash screen and whatnot?
Click to expand...
Click to collapse
Yes, when I boot it up it's grey, I notice that it's still working because I get the bootup noise. So I can see nothing. But what I noticed is that the grey screen gets a kinda bluegrey screen while the cyanogenmod7 boot animation(the loop)

Sounds like a hardware issue to me, I'd send it in for warranty if I could. Plus, with your screen being the issue I doubt they would check for something like S-off or anything like that

sounds to me like the ribbon cable for the screen has either broken or not placed in its socket properly, does it make a difference when the keyboard is open? try opening it and closing it a few times... watch the screen. otherwise it could be a fault with the screen board or the screen itself
i would try and claim off warrenty or insurance

No it does no difference when the keybaord is open:-(
Problem at the whole thing is, that I have no warranty because I bought it at amazon.com

you either have to see how much htc will charge to repair it, or take it apart yourself and just check the cables... if any are loose then refit them... or buy a new screen, vga board and ribbon cable and fit it

How much would the last option cost?
And how much do you guys think HTC will chare to repair it?

http://cgi.ebay.co.uk/OEM-SLIDE-FLE...944?pt=LH_DefaultDomain_0&hash=item2a10708cb8
something like that if its the ribbon cable.... but that gives you the whole kit
http://cgi.ebay.co.uk/Touch-Screen-...K_Replacement_Parts_Tools&hash=item2a0fd454a5
thats the digitizer but i dont think youll need that but just in case
http://cgi.ebay.co.uk/NEW-GENUINE-H...K_Replacement_Parts_Tools&hash=item2eb3f529d0
thats the screen
but in fairness your better off taking it to a repair shop and getting a price... if you havnt got a warrenty then you dont have to worry about loosing one

Wow thanks, you're really helping me.
So I found a warranty document, since I bought it over amazon.com from another seller(mobilejoker) and it says that they'll repair me my device if it is defect and not my fault. But they also charge 40$ if it's an obvious damage made by myself. Well, I don't know, it wasn't my fault right? I mean it's not like it dropped in water or fell on the floor.

looks to me like its the ribbon cable or the vga board for the screen, as long as you havnt dropped it in liquid, on the ground or opened it up then it cant be your fault... id go with the warrenty first before you open it up
Hit the thanks button please matey

Done
And thanks again for your help.

alrite glad i could help, if you get stuck or if the warrenty doesnt work come back

hey guys I'm having a very similar issue on my phone, I bought a screen on ebay from a USA seller, as well as a flex cable cus both were damaged in my phone. I've got both of those installed and the phone boots up, gives off noises and vibrates like his did, but no video. Backlight lights up, but just black. I've been googling a lot and apparently the grey screen is just a precursor to what I have. Where exactly is the VGA board? is it on the main logic board? does it need a reflow like some laptop chipsets?

Hey guys I just thought I give you a quick update.
So I got my device back, it's working perfect and I didn't have to pay anything for it.
I'm just a bit confused, because my phone now is totally unrooted, and I always thought that root hurts your warranty.
Anyways, thanks for your help!!

whitis said:
Hey guys I just thought I give you a quick update.
So I got my device back, it's working perfect and I didn't have to pay anything for it.
I'm just a bit confused, because my phone now is totally unrooted, and I always thought that root hurts your warranty.
Anyways, thanks for your help!!
Click to expand...
Click to collapse
Either they gave you a new phone or...
They replaced the screen (or samaged parts) and wiped or perhaps upgraded to newest stock.
Do you still have all your info and apps that were previously on it?
What version of android does it show in about, and which hboot do you have now?
Sent from my T-Mobile G2 using XDA Premium App

Well it's just like it was when I bought it, 2.2.1, only google apps, had to configure sim again no sms, etc.. But my phone is definitely now new because there are my scratches on the back of the phone.

whitis said:
Well it's just like it was when I bought it, 2.2.1, only google apps, had to configure sim again no sms, etc.. But my phone is definitely now new because there are my scratches on the back of the phone.
Click to expand...
Click to collapse
I didn't quite understand your reply, lol sry, but I did see one big clue....2.2.1. Which means you should have no problems rooting again.
Sent from my HTC Vision using XDA Premium App

I don't have any problems with rooting again, I was just saying that I was confused that I got my device repaired for free, although they unrooted my phone.

[Q] just purchased a g2 for $30. screen doesnt turn on

The phone definitely boots up because the lights on the buttons flash on then turn off after some time. The keyboard also lights up. You can tell the backlight turns on on the screen, but there is no picture.
Anyone have any idea about what I should do? Thinking about trying to restore to a stock Tom somehow tonight. Then I'm thinking about looking for screen replacements.
I was curious if anyone has had this issue before.
Update 07/14/11
So I got the screen and switched the old one out for the new one. This one also only has the backlight turning on, but I noticed when I put a part back on, there was a little bump in the middle of the phone. Haven't had a chance to fix it, but I noticed it's a piece hitting this rubber piece that seems to "transport" the sound for the mic from the bottom of the phone to the actual microphone module within the phone.
Removed that rubber piece, and I'll try installing it later. I was getting some blue and red visible in the middle of the phone. Anyone know what's wrong?

albanianbrotha said:
The phone definitely boots up because the lights on the buttons flash on then turn off after some time. The keyboard also lights up. You can tell the backlight turns on on the screen, but there is no picture.
Anyone have any idea about what I should do? Thinking about trying to restore to a stock Tom somehow tonight. Then I'm thinking about looking for screen replacements.
I was curious if anyone has had this issue before.
Click to expand...
Click to collapse
ebay for the parts and look around for the link for repairs. I don't exactly remember the link, but it's in one of the "spring replacement" threads. Good luck

mputtr said:
ebay for the parts and look around for the link for repairs. I don't exactly remember the link, but it's in one of the "spring replacement" threads. Good luck
Click to expand...
Click to collapse
How sure are you it's the LCD screen? Replacement screens cost more than what I bought the phone for...lol

it's mostly the physical connection to the screen.
and on your note about it costing more than what you bought the phone for... there are tons of parts on the phone that will cost more than 30bucks. not much you can do about that since you got it non fully functional.

mputtr said:
it's mostly the physical connection to the screen.
and on your note about it costing more than what you bought the phone for... there are tons of parts on the phone that will cost more than 30bucks. not much you can do about that since you got it non fully functional.
Click to expand...
Click to collapse
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?

albanianbrotha said:
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?
Click to expand...
Click to collapse
Never had to do it myself, but there is a cable connecting the two parts of the phone. That is usually where this problem originates from. It's not easy to fix though if your not familiar with fixing electronics from what i have seen.

xsteven77x said:
Never had to do it myself, but there is a cable connecting the two parts of the phone. That is usually where this problem originates from. It's not easy to fix though if your not familiar with fixing electronics from what i have seen.
Click to expand...
Click to collapse
I've taken apart my laptop completely and put it back together before. Completely as in taking the lcd off and different chips and wireless modules and stuff. I think it may be something I can handle. I'm going to take a look at it now. Restoring wont do me any good because not even the boot screen shows up.

albanianbrotha said:
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?
Click to expand...
Click to collapse
It's pretty much a ribbon cable that feeds data to display and stuff. When you buy a spare screen, it usually comes with a connector
Sent from my Desire Z via XDA App

mputtr said:
It's pretty much a ribbon cable that feeds data to display and stuff. When you buy a spare screen, it usually comes with a connector
Sent from my Desire Z via XDA App
Click to expand...
Click to collapse
So I completely tore apart the phone, got to the point where if I had another LCD screen, I could have easily switched it out. But I don't, so I just put it all back together. I really hope this new LCD will fix the issue. I really hope it's not some other motherboard issue. If all else fails, it goes up on eBay for $70-$100 as is for the phone. If I fix it, I just got myself a phone that goes for $200 used for only $57.

sure. goodluck with it. if you can do it then you're all set. good luck

albanianbrotha said:
So I completely tore apart the phone, got to the point where if I had another LCD screen, I could have easily switched it out. But I don't, so I just put it all back together. I really hope this new LCD will fix the issue. I really hope it's not some other motherboard issue. If all else fails, it goes up on eBay for $70-$100 as is for the phone. If I fix it, I just got myself a phone that goes for $200 used for only $57.
Click to expand...
Click to collapse
Only $57? That would make the lcd screen $27 if u really paid $30 for the phone, but you said the screen was more than what u paid for the phone...so now im confused.
Sent from my HTC Vision using XDA Premium App

Got my fingers crossed for ya that your getting ur phone fixed over there
Sent from my HTC Vision using XDA Premium App

ptesmoke said:
Only $57? That would make the lcd screen $27 if u really paid $30 for the phone, but you said the screen was more than what u paid for the phone...so now im confused.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Sorry. After some searching on eBay, I found some sellers selling it for a few dollars less than 30, e.g. 27.
But I decided to go with a seller who sold more than 200, who claims the screen is an OEM screen, and who is top rated. He sells his for $32. Which makes my phone $62 after all is said and done.
The housing has some scratches on the top and bottom though, which decreases the value a bit, but hey, if it works I'll probably keep it as a backup. Currently have the HD2, but I got a Vibrant with original box and accessories for $100, so I think I'm going to sell the HD2.
That was kinda off topic, sorry
LCD screen should be here by the 13th.

Updated OP

someone help =|

I don't own a G2 but I still think this could be a similar issue to what we get over here on the HTC Droid Incredible. First, what makes you believe its still a screen issue if it lit but just didn't throw picture? Usually thats the symptom of having the wrong recovery version for the device hardware version. Normally for us what happens is we will get somebody who is new and rooting for the first time and they'll end up flashing the wrong recovery or freak out because they don't realize the root process takes a little while and yank the cord. End result being exactly what you've explained above. Phone starts but no screen. So we end up having them do the ruu or a second option which we call a "blind install" where you drop whatever your p file(ours is PB31IMG.zip) so whatever it is for the G2 drop that on the SD and reboot to hboot and do the update process by simply knowing how long to wait between key presses and what keys to hit without useing the screen. Its a unique process and all very magical. Haven't lost a single Inc yet because of this issue.
Anyways bud just a thought...

wildstang83 said:
I don't own a G2 but I still think this could be a similar issue to what we get over here on the HTC Droid Incredible. First, what makes you believe its still a screen issue if it lit but just didn't throw picture? Usually thats the symptom of having the wrong recovery version for the device hardware version. Normally for us what happens is we will get somebody who is new and rooting for the first time and they'll end up flashing the wrong recovery or freak out because they don't realize the root process takes a little while and yank the cord. End result being exactly what you've explained above. Phone starts but no screen. So we end up having them do the ruu or a second option which we call a "blind install" where you drop whatever your p file(ours is PB31IMG.zip) so whatever it is for the G2 drop that on the SD and reboot to hboot and do the update process by simply knowing how long to wait between key presses and what keys to hit without useing the screen. Its a unique process and all very magical. Haven't lost a single Inc yet because of this issue.
Anyways bud just a thought...
Click to expand...
Click to collapse
It doesn't seem to be a ROM issue.
Update 7/18: Sold the G2 on eBay and still made a good lump of money. I was very happy, until another G2 popped up with the same exact issue. Got it for a steal as well, and I tried the OEM screen I got from eBay, and it was still having issues, and it seems to cause the phone to overheat while charging. Definitely a defective screen and someones getting a great deal on a decent condition G2 because I already took the payment after I figured it was the screen I got.
I'm going to try to get a replacement from the guy that sold it to me on eBay, but I already left him positive feedback thinking it was the phone's fault.
Will update probably late July or early August when all of this gets sorted out.
TL;DR: bought 2nd g2 with same issue, turns out replacement screen didn't work in the 2nd g2, too late to not sell the first g2, getting another replacement screen to fix 2nd g2. First g2 was in better condition though =|

SWEEEEEEEEEEEEEEEEEEEEEEEEEEEET
Just installed the second screen that I ordered, and it works PERFECTLY. Phone is perfect nowwww yay. I can't use it right now though, previous owned put a lock pattern on the phone...

Wipe the system and the data and start over.
Sent from my HTC Vision using XDA Premium App

Gratz now a factory wipe and root with a new rom will make it run sweet.
Sent from my Desire Z via XDA App

Shift touchscreen issue.

I noticed tonight that my touchscreen stops working when I slide the keyboard all the way out. It looks like when you slide it, when it gets about 1/2 way, the lights under the touch keys (home, search, etc) turn off, then 3/4 of the way out, they come back on, but you can't touch anything on the screen. No scrolling, no selecting, nothing. When you start to close it, the lights turn off 3/4 of the way open, then 1/2 the way open they turn on and the touch screen starts working again.
I've been watching videos on how to replace the digitizer and they look easy enough for me to do, but is it really the digitizer if it is working when the phone is closed? This sounds more like a loose cable, eight? Anyone else have this happen?

That does sound more like the flex cable
Michigan rockin the forums again :O
one by one the penguins steal my sanity

CodeMonk said:
I noticed tonight that my touchscreen stops working when I slide the keyboard all the way out. It looks like when you slide it, when it gets about 1/2 way, the lights under the touch keys (home, search, etc) turn off, then 3/4 of the way out, they come back on, but you can't touch anything on the screen. No scrolling, no selecting, nothing. When you start to close it, the lights turn off 3/4 of the way open, then 1/2 the way open they turn on and the touch screen starts working again.
I've been watching videos on how to replace the digitizer and they look easy enough for me to do, but is it really the digitizer if it is working when the phone is closed? This sounds more like a loose cable, eight? Anyone else have this happen?
Click to expand...
Click to collapse
Sounds like it's most likely the Flex Cable. Which is easy enough to change. They usually don't just come loose. Has been know to happen, but it's rare. You can repair it yourself, you just have to have the proper tools. If you do attempt it, be sure to take your time. You can pick the Flex Cable / Tool Kit up on Ebay, or Amazon fairly cheaply.

prboy1969 said:
Sounds like it's most likely the Flex Cable. Which is easy enough to change. They usually don't just come loose. Has been know to happen, but it's rare. You can repair it yourself, you just have to have the proper tools. If you do attempt it, be sure to take your time. You can pick the Flex Cable / Tool Kit up on Ebay, or Amazon fairly cheaply.
Click to expand...
Click to collapse
I personally wouldnt touch it... I had a bad flex cable and brought it to sprint and they bricked my phone while changing it... If sprint can brick that easily changing a flex cable, imagine your odds...
Sent from my PG06100 using Tapatalk

drob311 said:
I personally wouldnt touch it... I had a bad flex cable and brought it to sprint and they bricked my phone while changing it... If sprint can brick that easily changing a flex cable, imagine your odds...
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
That's very true. There is a chance you can damage, or even "Brick" the device if you don't know what your doing. I've changed about about five already. The first one took forever, I was so nervous. But after about the third one it was all good . Same with the digitizers, first one is like Ahhh . After about the 10th one it's not that scary. No I do not damage my phone that often. Just know a lot of people who do. That also do not have TEP Insurance.
TEAM MiK
Mik Roms Since 3/13/11

Ok, in the immortal words of Eminem, "I'm not afraid." Or wasn't, at least. I took it apart tonight and yep, the flex cable is broken. Taking it apart made it worse and I've lost my earpiece. The good news is the touch screen works while the keyboard is slid out... But it doesn't with it in. lol
I did find some on ebay, but does anyone know of a place that sells the sliding mechanism? Mine is pretty sloppy and I'd like to fix that while I have it open to replace the cable.

Your best bet is going to be a damaged Shift. I don't know of any place that sells just the parts. But I would still hunt around on the net. Maybe check Amazon, or Craigslist.
TEAM MiK
MikROMs Since 3/13/11

I mean nobody disrespect I am just as intrigued by taking things apart and just as satisfied with self repair as the next tech guy, but you don't even need to have TEP to get a shift with a broken flex cable replaced. This is a warranty issue. By no fault of yours, the phone is broken. Sprint replaces these without push back, I'm on my 3rd shift. Now that you've opened it though, you may be out of luck.

HTCotta said:
I mean nobody disrespect I am just as intrigued by taking things apart and just as satisfied with self repair as the next tech guy, but you don't even need to have TEP to get a shift with a broken flex cable replaced. This is a warranty issue. By no fault of yours, the phone is broken. Sprint replaces these without push back, I'm on my 3rd shift. Now that you've opened it though, you may be out of luck.
Click to expand...
Click to collapse
You can always tell them you took it to a third party store to get looked at.

It was out of warranty. I already tried the warranty route.
Anyway, got the cable today, put it in and the jawbone connector for the LCD is jacked up. It won't go all the way in no matter what you do. So I put the old one back in and now the touch screen is completely gone.
My wife called sprint while I was messing with it cause she wanted to see if there were any repair stores that had parts and they offered me an early upgrade. $105 bucks and I get up to a $150 discount as long as I re-up for 2 years. Since I'm pretty happy with Sprint, this is probably a win-win situation for me to do it, so I did.
Now I just have to decide... Moto Photo, Nexus 4g, or Samsung Galaxy 2. Any opinions?
*edit: I use CM7 on my shift and would like to continue to use CM7, I don't NEED CM9, but the option would be nice.

I have a shift for sale mint condition only 2 months old...
Sent from my PG06100 using Tapatalk

Sorry, I already signed up for the upgrade. I just need to go pick one up.

Wait for the Galaxy Nexus, that's what I'm doing. The development is too awesome on nexus devices for me to stay away any longer. Even if the specs are already somewhat outdated, I just want one

HTCotta said:
Wait for the Galaxy Nexus, that's what I'm doing. The development is too awesome on nexus devices for me to stay away any longer. Even if the specs are already somewhat outdated, I just want one
Click to expand...
Click to collapse
You will miss your Shift . Once the Shift has you, it will never let you go .

obe1kobe said:
I have a shift for sale mint condition only 2 months old...
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
How much? ....

obe1kobe said:
I have a shift for sale mint condition only 2 months old...
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
BOOOO! Try the marketplace on xda instead of advertising it here btw what's you next device? I'm trying to see if I should even bother staying with sprint now that LTE is on hold it seems like I might never get 4G speeds in my town.

Ok, didn't want to clutter things up and start a new thread so I'm gonna hijack this one. Hope thats ok.
I've been having troubles with my touch sceen the last few weeks and its very sporadic. So first issue it just simply stops responding all together. Like for instance i go to pull notification bar down and it stops part way down and i cant slide it up or down nor do the home back keys work. I have to hit power button to lock then hit power button and unlock then all is fine for awhile. And to be clear i dont have to power it off, just lock it. Another instance I'll be browsing the web and i go to scroll down it starts acting goofy. As if i got 2 fingers on the sceen trying too pinch to zoom when i clearly dont. Another silly thing happens where it acts like some one is remotely using my phone. For instance I unlock my phone and then it just hitting buttons. It's actually made a phone call for me before. Also happens when browsing or anything else.
I run miui build 112300 with sparks patch. I have ran this rom for a very long time so something tells me it aint the rom. I really dont remember what I've installed lately so don't know if an app would be causing this. Something tells me its a hardware issue but i was hoping to get some suggestions before flash something new or worse running the ruu to stock. Also, i dont think it would be the flex cable because it happens mostly without the keyboard out. Plus i rarely use my keyboard, although I'm using it right now.
Any suggestions would be appreciated.
Thanks in advance.
Sent from my PG06100 using XDA App

^^^ same thing happens to me. I think flashing the touchscreen firmware update would solve it but i haven't had time to try and fix it.
Shifted from my EVO

tbag1122 said:
Ok, didn't want to clutter things up and start a new thread so I'm gonna hijack this one. Hope thats ok.
I've been having troubles with my touch sceen the last few weeks and its very sporadic. So first issue it just simply stops responding all together. Like for instance i go to pull notification bar down and it stops part way down and i cant slide it up or down nor do the home back keys work. I have to hit power button to lock then hit power button and unlock then all is fine for awhile. And to be clear i dont have to power it off, just lock it. Another instance I'll be browsing the web and i go to scroll down it starts acting goofy. As if i got 2 fingers on the sceen trying too pinch to zoom when i clearly dont. Another silly thing happens where it acts like some one is remotely using my phone. For instance I unlock my phone and then it just hitting buttons. It's actually made a phone call for me before. Also happens when browsing or anything else.
I run miui build 112300 with sparks patch. I have ran this rom for a very long time so something tells me it aint the rom. I really dont remember what I've installed lately so don't know if an app would be causing this. Something tells me its a hardware issue but i was hoping to get some suggestions before flash something new or worse running the ruu to stock. Also, i dont think it would be the flex cable because it happens mostly without the keyboard out. Plus i rarely use my keyboard, although I'm using it right now. If not, time to take it to Sprint.
Any suggestions would be appreciated.
Thanks in advance.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
The first thing you can try is the latest Radio and Touchscreen Firmware HERE. If that does not work and the screen is still acting strange I would RUU back to Stock Unrooted. See if that resolves the issue. If not it's time to take it back to Sprint.

OK, thanks for the suggestions. Just flashed the new firmware. Like I said it was very sporadic so time will tell. Hopefully this works cause it's been a long time since I rooted my phone and I'd hate to unroot it.
Sent from my PG06100 using XDA App

[Q] Touchscreen Unresponsive after reboot menu

My touchscreen becomes unresponsive after holding down the power button to get to the Phone Options where the Silent mode, Airplane mode, Choose Profile, Screenshot, Reboot , and Power Off options are located. The touch screen becomes unresponsive, I have to power off the screen for a few seconds and turn it back on and the touch screen will work again. It just started doing this 2 weeks ago. I have tried different roms and no difference. I have performed task 29 no difference, even after fresh installation of roms with no other apps installed
Im suspecting a worn digitizer but not sure because it only does it after phone opentions menu is opened, other than that the touchscreen works fine. Than again not sure if its a rom issue because it does it with different roms even older ones i never had problems before. I just know how to flash roms and basic stuff and not that far advanced
By the way I have the latest MGLDR, and recovery, have performed task 29 and even tried it with the SD card out and same result
Any help would be greatly appriciated especially if you have had this exact problem please i want to hear from you
Thank you

Broken flat cable from digitizer to mainboard.I had the same problem.

Was it expensive to fix? Or did you fix it yourself? Did you replace the cable, digitizer or just the cable? And thanks for the help
Sent from my HD2 using xda premium

mvinceti said:
Broken flat cable from digitizer to mainboard.I had the same problem.
Click to expand...
Click to collapse
I think you mean broken flex cable from digitizer to lcd...

e334 said:
I think you mean broken flex cable from digitizer to lcd...
Click to expand...
Click to collapse
Sure he meant this, in order to make sense!
Solution: another touchscreen/digitizer or even better(but more expensive) new combo(lcd+touchscreen/digitizer)!

I have noticed that after it boots it will let me select an option from the the phone option menu but only when it is fresh of a boot, once the phone settles after a minute or two it's when the problem starts
For the meantime I'm using Quick Boot app from the market since that is the only thing it affects. I will check for prices to replace digitizer. I have seen the digitizers alone on Ebay going got around 10 bucks but I'm scared of the installation lol. I'm going to check the phone repair shop and check how they charge. If it's too much I'll just live with it since the Quick Boot app is working fine.
Thanks for the help guys, I really appreciate it and hopefully it can help somebody else with the exact problem
Sent from my HD2 using xda premium

Well took it to a local repair shop and guy told me the wires looked good and said maybe the motherboard was going out, well if it is guess I'll use my wife's Samsung Vibrant which I must say has never had any problems with, until its time for a contract renewal for me
Sent from my HD2 using xda premium

mexicandroid said:
My touchscreen becomes unresponsive after holding down the power button to get to the Phone Options where the Silent mode, Airplane mode, Choose Profile, Screenshot, Reboot , and Power Off options are located. The touch screen becomes unresponsive, I have to power off the screen for a few seconds and turn it back on and the touch screen will work again. It just started doing this 2 weeks ago. I have tried different roms and no difference. I have performed task 29 no difference, even after fresh installation of roms with no other apps installed
Im suspecting a worn digitizer but not sure because it only does it after phone opentions menu is opened, other than that the touchscreen works fine. Than again not sure if its a rom issue because it does it with different roms even older ones i never had problems before. I just know how to flash roms and basic stuff and not that far advanced
By the way I have the latest MGLDR, and recovery, have performed task 29 and even tried it with the SD card out and same result
Any help would be greatly appriciated especially if you have had this exact problem please i want to hear from you
Thank you
Click to expand...
Click to collapse
Me too
bib*oops said:
Sure he meant this, in order to make sense!
Solution: another touchscreen/digitizer or even better(but more expensive) new combo(lcd+touchscreen/digitizer)!
Click to expand...
Click to collapse
that's what I'm getting
mexicandroid said:
Well took it to a local repair shop and guy told me the wires looked good and said maybe the motherboard was going out, well if it is guess I'll use my wife's Samsung Vibrant which I must say has never had any problems with, until its time for a contract renewal for me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
I highly doubt the board is bad. I already took mine apart, a collection of dust and dirt causes the end button to mess up the contacts. Your board is probably fine if you aren't experiencing overheating or any other symptoms, no offence, he probably just wanted more work to do so they could charge you more. I've done some computer repairs for family and friends and it's ridiculous the bull that repair stores throw at you
Sent from my GT-I9100 using Tapatalk

elesbb said:
Me too
that's what I'm getting
I highly doubt the board is bad. I already took mine apart, a collection of dust and dirt causes the end button to mess up the contacts. Your board is probably fine if you aren't experiencing overheating or any other symptoms, no offence, he probably just wanted more work to do so they could charge you more. I've done some computer repairs for family and friends and it's ridiculous the bull that repair stores throw at you
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I'm not experiencing overheating issues, the guy didn't charge and said he didn't have another motherboard to swap out with and test. He didn't charge me anything at least. I know its ridiculous how much they charge sometimes but its out of warranty so I don't have much choice and I'm scared to take it apart and damage something else but I have no other choice now lol. Did you look at a video before you took your apart?
Also was your phone doing the exact same thing? It does make sense it could be a dirty contact, I work ata Chevy dealer and bad contacts sometimes do weird things but sometimes at the lock screen the touch screen won't work also and I have to turn of t the screen for it to work
Sent from my HD2 using xda premium

mexicandroid said:
I'm not experiencing overheating issues, the guy didn't charge and said he didn't have another motherboard to swap out with and test. He didn't charge me anything at least. I know its ridiculous how much they charge sometimes but its out of warranty so I don't have much choice and I'm scared to take it apart and damage something else but I have no other choice now lol. Did you look at a video before you took your apart?
Also was your phone doing the exact same thing? It does make sense it could be a dirty contact, I work ata Chevy dealer and bad contacts sometimes do weird things but sometimes at the lock screen the touch screen won't work also and I have to turn of t the screen for it to work
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Yes exactly the same thing like 100 percent exactly. And yes I did the hardest part is getting the device out of the case lol the rest is quite simple.
Sent from my GT-I9100 using Tapatalk

elesbb said:
Yes exactly the same thing like 100 percent exactly. And yes I did the hardest part is getting the device out of the case lol the rest is quite simple.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
did you use a plastic tool or a small screwdriver to get the phone out of the case?
Sent from my HD2 using xda premium

mexicandroid said:
did you use a plastic tool or a small screwdriver to get the phone out of the case?
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Small screwdriver, didn't want to but I was very careful and made sure I didn't hit anything
Sent from my GT-I9100 using Tapatalk

elesbb said:
Small screwdriver, didn't want to but I was very careful and made sure I didn't hit anything
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
After I take the cover of do I have to disconnect anything? I tried finding a video about it but no luck
Sent from my HD2 using xda premium

mexicandroid said:
After I take the cover of do I have to disconnect anything? I tried finding a video about it but no luck
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
No luck??? lol look my friend i am your luck

elesbb said:
No luck??? lol look my friend i am your luck
Click to expand...
Click to collapse
Lol thanks I meant after I take the cover off, I was able to take the plastic buttons of but I didn't see much dust, I **** a little compressed air but that's all, how did you clean up the actual buttons?
Well I put it back together after blew the buttons but for a little while the touchscreen was not working at all, I rebooted a few times and it started working but same problem
Just wanted to know how you cleaned the buttons if I'm missing something. I really want to fix it because I don't to use my wife HD2, I'll never hear the end of it from her because I always tell her phone is better lol
Sent from my HD2 using xda premium

mexicandroid said:
Lol thanks I meant after I take the cover off, I was able to take the plastic buttons of but I didn't see much dust, I **** a little compressed air but that's all, how did you clean up the actual buttons?
Well I put it back together after blew the buttons but for a little while the touchscreen was not working at all, I rebooted a few times and it started working but same problem
Just wanted to know how you cleaned the buttons if I'm missing something. I really want to fix it because I don't to use my wife HD2, I'll never hear the end of it from her because I always tell her phone is better lol
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Lol. what cover are you talking about? i just followed the one video and blew compressed air through ever little nook and crany. It didnt fix it completely as im not too worried about it since my digitizer is shattered. So i'll be more worried about it once i get a new digitizer. But just follow one of the videos on youtube, they take the thing apart all the way down to individual parts.

Hey use attached apk, and remap one of your other buttons to function as the power button. I have mine set to the green button since i dont use it anyhow. That way the endkey doesnt get used so much. It works perfectly. once i get a new display im gonna rig a way to keep this from happening again.

elesbb said:
Hey use attached apk, and remap one of your other buttons to function as the power button. I have mine set to the green button since i dont use it anyhow. That way the endkey doesnt get used so much. It works perfectly. once i get a new display im gonna rig a way to keep this from happening again.
Click to expand...
Click to collapse
thanks but now my touchscreen does not work at all now. Maybe it was just the digitizer going bad in my phone. I'm using a Samsung Vibrant which in my opinion sucks, I just got it rooted, now I need install CM7, I miss my HD2 so much. I think I'm just going to order a digitizer from Ebay and try to install myself
damn the HD2 phone owners have so many rom choices compared to this vibrant
Sent from my SGH-T959 using XDA

mexicandroid said:
thanks but now my touchscreen does not work at all now. Maybe it was just the digitizer going bad in my phone. I'm using a Samsung Vibrant which in my opinion sucks, I just got it rooted, now I need install CM7, I miss my HD2 so much. I think I'm just going to order a digitizer from Ebay and try to install myself
damn the HD2 phone owners have so many rom choices compared to this vibrant
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Ha, have you tried rebooting the HD2? If i hit the end key, it stops working completely, but after a reboot it works again. So far it hasnt stopped working since i remapped the green key to be power key. And yeah i had to use my Touch Pro 2 until i finally got an HD2. I cant wait to get a job and get an SGS2 though. Thats an amazing phone.

elesbb said:
Ha, have you tried rebooting the HD2? If i hit the end key, it stops working completely, but after a reboot it works again. So far it hasnt stopped working since i remapped the green key to be power key. And yeah i had to use my Touch Pro 2 until i finally got an HD2. I cant wait to get a job and get an SGS2 though. Thats an amazing phone.
Click to expand...
Click to collapse
My wife has the sg2 but won't let me touch it. There nice but I want a phone with a quad core processor like the HTC one, that's what I'm waiting for
Sent from my SGH-T959 using XDA

[Q] Arc S Up Volume Button Repair?

Hi All,
I love my Arc S. Love it. I'm even more careful with this phone than I usually am.
Unfortunately, my Arc S was knocked out of my hand over the weekend and fell on the floor. The back cover came off and battery fell out. In the rain!
Fortunately, the phone is almost perfectly fine - except the Up Volume button virtually no longer works properly. It takes a very, very hard press to respond and seems to be rapidly degarding to the point where it won't work at all.
Can anyone recommend a way I can get this fixed reliably and economically? I really don't like the idea of sending my phone away, but I like the idea of it not working properly even less. I can attempt a self-repair too if feasible.
I'm based in London, UK.
With thanks,
schnide

just set it to high and leave it? . Then if required you can change it via settings. You can also buy buttons off ebay.

soldiers33 said:
just set it to high and leave it? . Then if required you can change it via settings. You can also buy buttons off ebay.
Click to expand...
Click to collapse
That's fine for call volume, not so fine for media volume which can need changing constantly.
And buying new buttons might not solve the problem - the physical button looks fine apart from tiny cosmetic damage.
I would really appreciate an answer from someone with expertise on the internals of the Arc S to see if this can be fixed

schnidex said:
Hi All,
I love my Arc S. Love it. I'm even more careful with this phone than I usually am.
Unfortunately, my Arc S was knocked out of my hand over the weekend and fell on the floor. The back cover came off and battery fell out. In the rain!
Fortunately, the phone is almost perfectly fine - except the Up Volume button virtually no longer works properly. It takes a very, very hard press to respond and seems to be rapidly degarding to the point where it won't work at all.
Can anyone recommend a way I can get this fixed reliably and economically? I really don't like the idea of sending my phone away, but I like the idea of it not working properly even less. I can attempt a self-repair too if feasible.
I'm based in London, UK.
With thanks,
schnide
Click to expand...
Click to collapse
Why not give it to sony for a repair..
Sent from my Xperia S using XDA

king-iyokan said:
Why not give it to sony for a repair..
Sent from my Xperia S using XDA
Click to expand...
Click to collapse
It's not a bad idea I suppose, but I can't help feeling that'll be the most expensive way of doing it and I don't know what their repair quality is like.
I bought a French unit (from a UK company) although I imagine it has a European warranty. Thing is, the unit was damaged by 'myself' and hasn't just turned faulty on its own.

wen i sed change buttons i meant thr actual ribbon part. Not the physical buttons.

soldiers33 said:
wen i sed change buttons i meant thr actual ribbon part. Not the physical buttons.
Click to expand...
Click to collapse
Ah right, sorry I didn't realise. I had a quick search on eBay but unfortunately found nothing. I guess I'd have to find a repair guide too.
Off to Google..

schnidex said:
Hi All,
I love my Arc S. Love it. I'm even more careful with this phone than I usually am.
Unfortunately, my Arc S was knocked out of my hand over the weekend and fell on the floor. The back cover came off and battery fell out. In the rain!
Fortunately, the phone is almost perfectly fine - except the Up Volume button virtually no longer works properly. It takes a very, very hard press to respond and seems to be rapidly degarding to the point where it won't work at all.
Can anyone recommend a way I can get this fixed reliably and economically? I really don't like the idea of sending my phone away, but I like the idea of it not working properly even less. I can attempt a self-repair too if feasible.
I'm based in London, UK.
With thanks,
schnide
Click to expand...
Click to collapse
It you flash the official ICS rom onto your handset then you gain the ability to move the volume slider on the phone screen up and down. This works for media volume and call volume.
There also might be an app on the market to do this - have a look there
also if there are no scraches you could possible send it into Sony and say that it stopped working on its own accord

adsada arc said:
It you flash the official ICS rom onto your handset then you gain the ability to move the volume slider on the phone screen up and down. This works for media volume and call volume.
There also might be an app on the market to do this - have a look there
also if there are no scraches you could possible send it into Sony and say that it stopped working on its own accord
Click to expand...
Click to collapse
Thanks for this, I'll bear it in mind but would like to have the hardware side working as that's what it's meant to do.
Unfortuantely there is minor cosmetic damage on the volume button in the form of a small scratch/dent.

ive seen a site before that sells lots of different ribbosn for arc. Search it up on google I think it cost around £7 or £8

soldiers33 said:
ive seen a site before that sells lots of different ribbosn for arc. Search it up on google I think it cost around £7 or £8
Click to expand...
Click to collapse
Tried 'Sony Ercisson Arc S Ribbon' and 'Sony Ercisson Arc S Ribbon Replacement' but no joy - any other search term ideas?
I appreciate your help by the way, so thank you.

just tried looking and cant find it anymore. Only ones I can find are keypad, and camera buttons.
Also if youre saying it works when pushing hard maybe its cause the plastic behind it snapped off therefore you must push very hard in order for it to catch against something. I think its best to open the phone and have a look.

schnidex said:
It's not a bad idea I suppose, but I can't help feeling that'll be the most expensive way of doing it and I don't know what their repair quality is like.
I bought a French unit (from a UK company) although I imagine it has a European warranty. Thing is, the unit was damaged by 'myself' and hasn't just turned faulty on its own.
Click to expand...
Click to collapse
Man they are gonna repair it even if you were the one responsible for the damage.. And repairs can be done all ovr the globe. They are just going to charge you for the repair.. I think its a lot better idea than banging your head..
Sent from my LT26i using xda premium