hey ya'll,my wizard don't recognize my battery....it wont charge,it wont turn on...i put it on "cables" and turn it on somehow,but it says that there's no battery at all....i've tried other batteries and it's the same thing....first i thought it was a RoM problem,but no...tried several others and i have same problem....any solution???
Related
Hello knowledgeable guys out there, i had a major problem with my xdaII, the amber/green LED light just wont turn off, even when unplugged to the charger, im affraid that this can drain my battery, i tried hard-resseting and reflashing the rom, btw i use 2.06WWE rom and extended rom from Sin. Can anybody suggest a brighter idea?
21 views and still no reply?
Try to take off batery for few min.
Amber LED
I tell you pal.. just reflash your device and reload the OS once again, this might fix the bug..
Good luck... :?
i tried removing the battery and letting it drain off, but still the problem persist, its like its always on the charging mode even when you are not charging it, and its burning power more quickly, the battery dramatically goes down quick. Its original ROM was 1.66, then i encountered that problem, then i thought reflashing it with a newer version of ROM, 2.06 could fix the problem, but it still cant be fixed, any other bright ideas? or any of you guys out there had encountered this problem before?
Better bring it to your nearest service center. Its a mechanical problem.
Goodluck
ok, il try to bring it back to globe telecom, im sure its still under warranty. Thank you guys for your acknowledgement
I have a Qtek 2020i and recently I also have this problem, the amber led is always on even if it's not in charging mode, and the battery discharge very quickly, only one night! (I use 2400 mAh battery!).
If I do a soft reset and don't turn off the PDA, the amber led is not turned on, so looks like normal, but if I turn off and turn on again, the ambed led will turn on in 4s approximately.
I have this problem since the day I unplugged my 2020i from USB cable on PC (usb mode with CARD EXPORT) without desactivate usb connection on PC side.
I've tried everything but still not working, flash rom, activesync & usb mode, unscrew and open the pda completely...
Can anyone help?
I have upgraded my Qtek 9100 with new Windows Mobile 6 WWE. After restarting the device everything worked OK, i just setted up basic things (clocks, owner information etc..) - nothing peremptory. After this I restarted it with soft reset again and it still worked... But then i shortly pressed power button (just to turn off the display) and after 10 minutes i wanted to turn it on again, but nothing happened.. The GSM LED diode still winked, but I couldnt turn the device on. So I used soft reset and again nothing happened, just GSM LED diode stopped winking. - Since this it was totaly bricked. I also tryed hard reset and bootloader mode, but none of this appered. The battery was 100% charged and I tryed to charge it again, but it didnt helped. I also tryed to take out and insert again the battery, but it still was unsuccessful What should I do now?
If the lights are still blinking then the phone still has life and appears to be operating (in some fashion). If you plug in the USB cable, does the charging light come on? If that does, then it is definetly still running.
I would suggest you taking the battery out and leaving it out for 5mins - 30mins. Then putting it back in and try turning it on. If nothing, try doing a hard reset after that. Also remove your SD card.
Good luck
Lights arent blinking at all. When I plug in the USB cable or charger, also no lights. I also tryed hard reset after plugging the battery, but again unsuccessful
Sorry, but its sure sounding like a bricked phone (although I've never heard of one that bricked sometime later. Usually its right after an upgrade).
Only other possibility is your battery has been completely drained. Can you get another battery to try in the phone? If not, then you can try jump starting the battery.
http://forum.xda-developers.com/show...38&postcount=9
Yes, I know that is bricked. What should I do to unbrick it?
Temporary brick at most if it was still running after the update. Try the different combos of battery out and in. This sounds like what a device does when the battery is bombed. If nothing, a new battery is definitely in order before you assign it permanent doorstop status. Good luck.
I've been working on my friends 8125. First the original battery died and he couldn't charge it with the phone, so I performed the "jump start" trick with the 9v battery. That resolved the issue, but then he let it die again, and he jump start trick didn't work. SO the diagnosis was to replace the battery...
Well now that I have a new battery that works, the phone has somehow gotten stuck in "Charge Mode" and the moment I insert the battery it starts to overheat. This occurs before even turning the phone on. Once turned on the battery indicator shows that it is charging, even though its not plugged in.
I'm wondering if this is due to a hardware problem with the mini-USB port or something.
I searched the forums, but didn't find anything close to this issue so any idea will be much appreciated.
I'd say
that it was the battery. Try another one.
Overheating Issue
Being that it was already tested with a new battery and still didnt work, I would try to go into bootloader and reflash with original att or tmobile rom for the 8125.
I have the same problem, I've already re flashed the original ROM but still have the problem, any suggestions?
Hello all!
So I have a qtek 9100 and tried to flash with "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe", the installer started, the wizard was showing me the white screen and progress bar, sudently I get an eror message from pc, and guided to repair the erors. Meanwhile my phone gone off, and now it does not want to open, i tried hard reset, but seems nothing is bringing it back to life. I measured the battery and my voltmeter shows 3.8V, so i guess the battery is ok. I tried removing the battery and putting it back on but it doesn't turn on.If plug it in the wall charger, it doesn't lite up the charging led.
I'm kind of swetting...what can I do now?
try to take the battery off and wait in 10 minutes before you place it in.. try to on it after that.. that might help.. have heard it has helped many here in this forum.. either your bricked it or not.. 10 minutes will or might show..
Thanks for the quick answer, i'm waiting now to see if it works.
Any other tips are welcome.
no...no result...it still doesn't go on
Is there no way to Jtag one of these phones?
Sorry...what "Jtag" means?
Is there any chance that when i tried to flash my ROM to burn my battery?
my phone was charging. suddenly it turned off. now it wont turn on at all.. i have tried a different battery and still wont turn on.
it turned on once for a minute and then turned off again . now it wont turn on at all.. ive tried all key combinations..
im rooted with the UMUT rom N900..
are you getting the battery charging graphic on the blank screen or not. if not maybe umut offline charging is not supported. remove your battery and charge it in another phone or charger.
maybe you are just out of battery
.......
try to enter download mod by up+power+menu and then use official rom with odin
Ihope ur problem resolve at once