After factory reset my A500 was recognized by android market as another device than before. Now I have 2x A500 in device settings on market and when I connect to market from my tablet, I don't see my purchased apps. Is there any way how to fix it? Please help.
(Sorry for my english)
Related
Hi i have a 16gb wi-fi model and recently updated the build to Android 4.2.
On purchasing this originally i rooted and unlocked it so i could use stickmount for USB storage etc. but after updating it this app was only working occasionally so i downloaded root checker pro and it said my device wasn`t properly rooted so i attempted to re-root but since then i have had this problem.
I installed wugfresh version 1.6.0 and flash stocked/unrooted in softbrick/bootloop to see if this helped which it done but on start up i had the same problem with pausing at the X screen after the google and unlocked padlock screen.
The only thing i can do is get the tablet into recovery mode but have tried factory resetting this way but no joy there either.
My PC also wont recognise the device now and theres a problem with not recognising adb mode?
Lastly once i unplugged the device from the usb otg lead it turned off and wont come back on so i think the battery might now be faulty/broken.
If anyone can offer some advice for a fix this would be greatly appreciated but i`m not your average tech head so a simplified answer would also be appreciated.
Thanks
Originally Posted by khrisjian
Please I have a similar problem, and these are the facts that I did
1. Root my kindle and install Cyanogenmod 9 (everything is fine for a while)
2. Unroot kindle and uninstall TWRP (mine stupidity) :/
3. I locked out my kindle after put bad patterns and worse not have wifi connection anymore
4. I tried to root again and again but the kindle restarts every time
5. Now my kindle after I connected to charger restarts 2 or 3 times then loop in cyanogenmod logo for ever and drains all battery (the logo is moving)
6. I tried to root once again but the FKU don't recognize
more facts
a. Everytime I connect my kindle to a PC the kindle power up and the pc it recognizes an usb mass storage but does not appear a drive
b. After install drivers (run install_drivers.bat) in a new PC then connect the kindle for first time the device manager appears a new device with name of "Galaxy" but then the pc it recognizes an usb mass storage but does not appear a drive
Please help I don't know how to do anymore
P.D. I'm so sorry for my bad bad english
Wow sounds like an ugly situation. You will very likely need a factory cable to force it into fastboot in order to Reflash twrp. What do you mean by uninstalled twrp can you provide more info on your steps? To resolve your driver issue you might want to first start with a live usb and soupkit http://forum.xda-developers.com/showthread.php?t=1850038 .
Thepooch said:
Wow sounds like an ugly situation. You will very likely need a factory cable to force it into fastboot in order to Reflash twrp. What do you mean by uninstalled twrp can you provide more info on your steps? To resolve your driver issue you might want to first start with a live usb and soupkit http://forum.xda-developers.com/showthread.php?t=1850038 .
Click to expand...
Click to collapse
I remember that removed the blue letters "Kindle Fire" from first boot logo and the option to get in to Recovery Mode hence to avoid entering there I don't remember how I did that
Hi guys,
I have a massive problem.
I recently updated to 4.3 rooted etc, after a few days of not using my nexus 7 on the pc I wanted to flash a new rom.
Now my N7 is only shown as an "Unknown Device" in my Device Manager.
I tried to deinstall Drivers, install, everything, I tried every possibilty in Wug's toolkit, nothing worked. I also tried it on another Notebook where i have never connected any mobile device, same message and i'm not able to install the drivers.
I also tried several ports and cables(the original one included)
Here is the message:http://i.imgur.com/tgxOeZQ.jpg
Translation: The optimal driver software for your device is already installed.
After this I flashed back to 4.2.2 (downloaded the rom on my N7) while performing a normal factory reset, I can't wipe everything because then I am not able to flash anything.
So after flashing to 4.2.2 my N7 was shown as a portable device in my device-manager. I then turned on USB-Debugging to stock+unroot, it was then shown again as a Unknown device, in both modes, USB-Debugging turned Off and On.
So now my question, is there a solution to this? I searched for possibilites to get back to stock without USB but most of them were a bit sketchy or had dead links. Please help me (sorry for my bad english)
Edit:
I just the cable of my old Motorola Defy, and it randomly connects and disconnects(still shown as unknown), so basically I think it is possible that my USB plug is broken(it takes about 6 hours to load the battery which I think might be as well a reason for a broken USB plug).
But to send it back to Google I need to Stock Unroot first so here my problem is again!
greetings
I have an old Nexus Player which I am trying to get working. I ran a factory reset from the UI when I got it up and I was able to get through all the Google TV setup config steps like setting up wifi and enabled location detection. Once that is done I get a blank screen.
I am willing to try flashing the device but I am not sure how. I cannot enable USB debugging because I cannot access the developer options.
I am able to access the Recovery menu where I can wipe data and reinstall the OS but I cannot see a way to install a new img.
I am a noob here. I have tried factory reset a number of times to no avail. I tried to list all devices through adb on my laptop but it does not show up. I really just want to get this thing to work.
What can I do?
Hello,
There seems to be some problem with the USB data transfer function on my phone.
It used to be automatically recognized by Android File Transfer on Mac but now it's not working at all.
I went to the Asus tech support here in Taiwan and they just wanted to take the phone and change the micro-USB board without even running any diagnosis on the phone (useless).
So I just brought it back with me, tried a factory reset but that didn't work.
I'm considering downgrading the firmware, is anyone else having the same problem?
Thank you!