I'm having Bluetooth issues on HTC HD2 with NexusOne android rom installed. My phone connects fine, but after hanging up a call something happens where it drops the connection and the only way to get it back is to turn off bluetooth on the phone and turn the stereo off, then turn bluetooth back on the phone and then turn the stereo back on. Even though the connection gets dumped the stereo is not recognizing it.
When streaming music or podcasts the behavior is that the phone is streaming, a call is placed (or comes in) which pauses the stream and then when the call has ended the stream should resume. In my case I get the dreaded "force close" vibrate series (vibrate, pause, then 2 vibrates) but I never get a force close message. The content that was streaming attempts to stream and then stops and the connection is gone at that point.
I'm very frustrated at this point as I have taken the time to reinstall everything from scratch, wiping the phone to factory, deleting dalvik cache, regular cache, wiping, etc. from recovery. It worked last night in testing and it worked initially this morning. And then a little later this morning it went back to not working
Related
Hello Everyone,
I'm having some odd problems that seemed to have started when I updated to CRB43. There are 2 consistant things I've noticed so far and these all happen when a headset adapter device is plugged into the phone.
1. If I'm listening to music in my car and a phone call comes in, the music stops (as it should), but there is no ring, just vibrate. When I try to unplug the adapter and answer the call, there is silence and the call goes to voicemail even though the phone appears to be in the call.
2. While listening to music, if I get any kind of notification, the sound goes dead even though the music is still playing.
In both cases I have to reboot the phone to get back to normal.
Any ideas?
Thanks,
Tim
I had the same problem.
Use Lucid's script and restore the Audio to stock.
If that doesn't work, reinstall the radio from HTC.
I finally got mine working by doing both on the same reboot, so I'm not sure which one fixed it when I was using JF's rom. Whichever, the combo of both did the trick for me.
I must have not done the radio update, because that's what worked for me, it's working good now. Thanks for the reply!
Super.
Glad it worked.
I'm not exactly sure how mine got overwritten either. But I figure it was one those causing the problems.
Now...
I've been trying the audio hack, and I simply cannot get it to work. No combination of versions work without phone calls and notifications completely stopping the audio server. Regardless of the build I choose. Luckily, I don't give up
My MyTouch 1.2 is acting really frustratingly stupid. The speaker and mic aren't working right, and the closest solution (and explanation) I could find for this was a post I found on a T-Mobile forum:
A few weeks back I tried to make a call on my phone and I wanted to use the speaker, when I brought up the menu to select "speaker", I noticed that the option was greyed out and so I couldn't enable it. After that I looked at the screen and it said it was dialing, but I heard no sound coming out. Next I clicked the volume control all the way down to mute and then all the way to max volume, still no sound. After ending the call I double-checked to make sure I wasn't connected to any bluetooth device, bluetooth was disabled. So then I tried to change the ringer volume and the speaker emitted its beeps letting me know how loud the ring volume was. That told me the speakers worked as well as the hardware responsible for generating sound. My next idea was to see if the media player had sound, so I played an mp3 from my sd card, no sound, went to youtube and played a few different videos, no sound. Called my friend, who was standing next to me, and when he answered he said he couldn't hear me speaking, I couldn't hear him either.
Something was seriously wrong with my phone so I bit the bullet and reset it to factory settings, the problem persisted. I took the phone to a TMobile store and they got me a replacement phone. The phone was working for 3 days and then the same problem occured. I got another phone (my 3rd phone) and this morning it has stopped working in the exact same way. I don't do any hacks or developer apps. There is no pattern to this except that it always seems like I'm at work when it happens.
UPDATE WITH SOLUTION: After thinking about this issue it occurred to me that the phone was behaving as if it had a bluetooth device connected to it. As an experiment, I went to my car which is paired with my phone and selected the audio source as my phone. At first it couldn't connect to my phone. So I looked at my phone's bluetooth setting and the status for my car's connection was "paired and not connected". I selected the connection on phone and retried with my car and bam, audio now works. I disconnected the phone from the bluetooth and sound was restored! So mytouch 3g has a bug in their bluetooth services. TMobile/HTC, hit me up if you are looking for a top-notch developer to fix your defects.
Click to expand...
Click to collapse
Unfortunately, this solution didn't work for me, and I've tried pairing it with every device I could possibly pair it with. No dice. Anyone have a fix for this?
Having a problem and can't track it down.
Apparently no one else os having this same issue!?
My bluetooth stereo headsets pauses for 1 second every 15 seconds.
I first thought it was only to my Motorola T505 but it now happens on my Motorola HT820s.
It's intermittent, it didn't happen the first few times I used the HT820s. i've gone two days using the T505 without any pauses.
It happens plugged in or on battery power, both headsets are fully charged, I've repaired them both a number of times, I've even reset the phone.
The HT820s are old tech, the T505 has worked pretty much flawless with every other phone I've paired it with.
I'm at a total loss.
Try turning off your wi-fi.
-------------------------------------
Sent via the XDA Tapatalk App
videocam said:
Try turning off your wi-fi.
Click to expand...
Click to collapse
Thanks. I'll try that as soon as I can repeat the problem. As of right now it's NOT pausing again.
I can't remember offhand is I played with any Wi-Fi settings the two days it didn't pause.
Sounds promising.
Need to check some more. Earlier today I fired up Pandora and it was skipping turned off Wi-Fi and it instantly stopped.
At home again it's not pausing with Wi-Fi on, Next time out I'll try to see if turning off the Wi-Fi notifications will stop the pausing.
-edit: This morning I left the house with Wi-Fi on, music did NOT pause, I then turned on notifications and it started skipping, At that point the only "fix" was to turn off Wi-Fi altogether, simply turning notifications back off did nothing.
I recently had my Galaxy S4 from AT&T JTAG'd, and upon receiving it I've had no sound. I've tried factory reset, clearing partition, going through the sound settings and turning off adapt sound.
When I try to listen to a video or any sound, I play the video, my phone vibrates, then a few seconds later vibrates twice. After, the app crashes. I've tried headphones, and the phone says headphones are plugged in, but no sound and same crash occurs.
When trying to use adapt sound, I plug my headphones in, the message appears, but at the bottom the phone asks me to plug my headphones in.
Since I soft bricked my phone, today the first day I've had my phone in almost a month, and the day I get it back the sound doesn't work.
This is really frustrating, so any and all help is welcomed!
AhellHound said:
I recently had my Galaxy S4 from AT&T JTAG'd, and upon receiving it I've had no sound. I've tried factory reset, clearing partition, going through the sound settings and turning off adapt sound.
When I try to listen to a video or any sound, I play the video, my phone vibrates, then a few seconds later vibrates twice. After, the app crashes. I've tried headphones, and the phone says headphones are plugged in, but no sound and same crash occurs.
When trying to use adapt sound, I plug my headphones in, the message appears, but at the bottom the phone asks me to plug my headphones in.
Since I soft bricked my phone, today the first day I've had my phone in almost a month, and the day I get it back the sound doesn't work.
This is really frustrating, so any and all help is welcomed!
Click to expand...
Click to collapse
Have you considered sending it back to the people that Jtag'd it so they can fix it correctly? Or at least contacting them?
Whenever I connect to one of my Bluetooth devices it shows that it's "Connected to xxxxx" in the secondary screen.
However, after I disconnect from the Bluetooth device it still says its connected in the secondary screen and the secondary screen just hangs there frozen saying its connected. I can only get rid of it by restarting the device.
Anyone else having this issue?
I'm experiencing this issue. I think it started happening after applying the latest update.
to fix it w/o restarting the device, you can go to settings - display - second screen and turn off 'show when main screen on' and back on.
I have this and all kinds of BT issues with my car.
Bluetooth has given me a lot of problems. Secondary screen stuck displaying the "connected" message, Bluetooth crashing, and high CPU usage when not connected. I've had better experience by toggling Bluetooth off and on with Tasker after disconnecting from my car. Figure it gives it a kick causing it to play nice.
McNutnut said:
Bluetooth has given me a lot of problems. Secondary screen stuck displaying the "connected" message, Bluetooth crashing, and high CPU usage when not connected. I've had better experience by toggling Bluetooth off and on with Tasker after disconnecting from my car. Figure it gives it a kick causing it to play nice.
Click to expand...
Click to collapse
So it's not just me having bluetooth issues lately. I was getting ready to drop by AT&T because of all the problems it''s been giving me lately connecting to things on bluetooth...
Mine has recently started doing the same thing with second screen stuck on connected to vehicle Bluetooth. I do remember updating recently so I am unsure what cause this issue. I am using stock with ATT
peekeesh said:
to fix it w/o restarting the device, you can go to settings - display - second screen and turn off 'show when main screen on' and back on.
Click to expand...
Click to collapse
I tried this trick and it only works temporarily. After an hour or so the same connection message will appear even though I'm not connected. So annoying. Come on LG! I like their devices but there is always some annoying issues with their phones.
Are you guys also experiencing general notification issues?
Example, I click on a Twitter or Kijiji notification and the app won't open or I can't respond within the notification shade any more.
See https://forum.xda-developers.com/showpost.php?p=72734315&postcount=10
I'm wondering if this is the cause of everyone else's bluetooth/notification issues. Worth a shot.
Ever since I upgraded to 10K from 10J on T-Mobile it has started doing this. Once I am connected I never have a problem with Bluetooth but connecting has been inconsistent ever since upgrading. My car stereo for example used to connect automatically now to get it to reconnect I have to turn off the stereo and the Bluetooth radio on my phone and then both back on @ same time otherwise I have to manually connect through the phone BT menu
Been having issues with bluetooth too. I've gotten into the habit of just turning it off after I get out of the car, then turning it on right before I get back in the car. If I leave it on all the time it fails to connect about half the time I turn on the car, if not more. Strangely I don't have the same issue with my Anker speakers, so I sort of assumed the car was the problem, but it seems not from these comments
McNutnut said:
See https://forum.xda-developers.com/showpost.php?p=72734315&postcount=10
I'm wondering if this is the cause of everyone else's bluetooth/notification issues. Worth a shot.
Click to expand...
Click to collapse
This seems to have fixed it for me! I had the same issue after updating my phone to the latest build.
thisisjason said:
Been having issues with bluetooth too. I've gotten into the habit of just turning it off after I get out of the car, then turning it on right before I get back in the car. If I leave it on all the time it fails to connect about half the time I turn on the car, if not more. Strangely I don't have the same issue with my Anker speakers, so I sort of assumed the car was the problem, but it seems not from these comments
Click to expand...
Click to collapse
Same exact issue. It only seems to happen to my car stereo since I upgraded to 10K. But my other speakers and headsets 99% of the time it will connect by itself.
Same issue here. Super annoying. Appears to have shown up around the same time that all my notifications stopped working.
I've been having the same issue. I use Car Home Ultra, and noticed that it was very delayed starting, and would start randomly even after leaving my car/disconnecting bluetooth. I thought it was a problem with that app, but now it appears it's that the phone is delayed in notifying of bluetooth connect/disconnect.
I constantly have the "connected" notification taking up the second screen until I reboot.
I am experiencing this aswell, and , when connecting to my SYNC 3 in my Ford Focus, it says connected, but it isn't. If someone rings me, the hand set rings.
It seems to be the initial handshake, if the phone's bluetooth is off when i turn car on, then i turn blutooth on and select "sync 3" it's all good, but if bluetooth is already on , and i switch car on , i get the message on the radio it's connected to my phone... but i cant access contacts or messages ( even though they are ticked in bluetooth menu )...
lucky for the 2 year warranty...
Disabling the Google app has fixed this issue and fixed my push notifications. Not ideal but doesn't appear any other answer exists.
Anybody have any updates on this issue? I have been having the connected message showing more frequently to my vehicles. I have been turning off second display and back on to remove. Thanks for the suggestion Adam about disabling Google app but like you said it is not ideal.
So on Verizon they just pushed a system update. Post update, I enabled Google app, and everything appears to be working great thus far.
I don't remember when but the issue just kind of went away without any action on my part. Maybe it was an update?