i have tried so many times to install android by all three methods, daf,cwr,haret.exe, and it is always successfully installs it. but on every reeboot it stucks on the boot image and does not proccesses forward. i waited for two hours but still no response, what to do?
hstr said:
i have tried so many times to install android by all three methods, daf,cwr,haret.exe, and it is always successfully installs it. but on every reeboot it stucks on the boot image and does not proccesses forward. i waited for two hours but still no response, what to do?
Click to expand...
Click to collapse
Hi,
More information is required.
Please list ALL the steps you took .
WM 6.5: 3.27
Radio: 2.15
Maglrd: 1.13
CWR: 3.0.0.05 [something like that]
ROM i need: http://shiftpda.com/showthread.php?tid=4137
HSPL4: 2.08
hstr said:
WM 6.5: 3.27
Radio: 2.15
Maglrd: 1.13
CWR: 3.0.0.05 [something like that]
ROM i need: http://shiftpda.com/showthread.php?tid=4137
HSPL4: 2.08
Click to expand...
Click to collapse
Hi,
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
Repartition according to ROM requirements.(via number 5 usb flasher)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024 MB with 0 MB swap)Remember: ALL data on your SD Card will be erased!
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
Related
well i install android to my hd2 with the help of this threads:
http://forum.xda-developers.com/showthread.php?t=893948
but i finish the instalation and everything, is working well?(except wifi.....)
but now i want to flash this room..
http://forum.xda-developers.com/showthread.php?t=1100707
i download the "1.6v magldr" but i dont know how to install it.. this room it can be install with magldr v1.3??? or i have to use other program.. please someone help me. step by step
XPeruchoX said:
well i install android to my hd2 with the help of this threads:
http://forum.xda-developers.com/showthread.php?t=893948
but i finish the instalation and everything, is working well?(except wifi.....)
but now i want to flash this room..
http://forum.xda-developers.com/showthread.php?t=1100707
i download the "1.6v magldr" but i dont know how to install it.. this room it can be install with magldr v1.3??? or i have to use other program.. please someone help me. step by step
Click to expand...
Click to collapse
Hi,
Backup your data before you start.
Get THIS TOOL
Reboot,hold power button and go to 5 USB flasher.
On the HD2 installer select MAGLDR Repartition, 200MB,connect your USB to pc/laptop and press repartition.
Go to ad recovery>wipe data,cache partition,and dalvik(advanced)
You are then ready to flash your ROM.
Go to install zip from sd card,choose your ROM(having already placed it on the root of your sd card).
thank you very much.. but i have a problem...
i did eveything and it did install and everything.. but when i reboot it doesnt load.. is stock on a screen the saids "HTC"
what i do?
the best thing to do when you want to change the nand rom is to make a clean install ...
- task 29
- radio 2.15
- magldr 1.13
- REcovery and install the zip from the sd card
XPeruchoX said:
thank you very much.. but i have a problem...
i did eveything and it did install and everything.. but when i reboot it doesnt load.. is stock on a screen the saids "HTC"
what i do?
Click to expand...
Click to collapse
Hi,
Please start from scratch...
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
im gonna try it right now... thanks!!!
=)
thank you it did work!!!! great help!!!
XPeruchoX said:
thank you it did work!!!! great help!!!
Click to expand...
Click to collapse
Glad to help...
i'v been looking for this also
thank you very much
I have a us T-Mobile htc hd2 which was running android nand sense and I had a touch screen issue. I found the fix to revert my phone back to factory, un-installing hspl back to spl. Sent the phone off to htc which they replaced the screen under the warranty. I got my phone back and tried to put the same programs and files I used in the beginning
I have spent hours reading and trying things suggested like using a radio file Radio_Leo_2.15.50.14, I have downgraded spl from my 2.10.000 to 2.08.000
When the phone reboots I get a message ss sd kernel open fail then MAGLDR Boot Menu Screen but am unable to load files with the usb
Any help?
imglknight said:
I have a us T-Mobile htc hd2 which was running android nand sense and I had a touch screen issue. I found the fix to revert my phone back to factory, un-installing hspl back to spl. Sent the phone off to htc which they replaced the screen under the warranty. I got my phone back and tried to put the same programs and files I used in the beginning
I have spent hours reading and trying things suggested like using a radio file Radio_Leo_2.15.50.14, I have downgraded spl from my 2.10.000 to 2.08.000
When the phone reboots I get a message ss sd kernel open fail then MAGLDR Boot Menu Screen but am unable to load files with the usb
Any help?
Click to expand...
Click to collapse
Hi,
Did you install HSPL 2.08HSPL?
THIS TOOL is very useful for everything you need...
yes I loaded hspl 208
I tried again and got the same error from MAGLDR113 sd kernl open fail and I tried to port DEFT Android again and got this error message
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
imglknight said:
yes I loaded hspl 208
I tried again and got the same error from MAGLDR113 sd kernl open fail and I tried to port DEFT Android again and got this error message
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Click to expand...
Click to collapse
Hi,
You need to start from scratch...
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
malybru said:
Hi,
You need to start from scratch...
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
Click to expand...
Click to collapse
I dont get it ....I have problems with this (when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache) I cant get there when i go to ad recovery it says "no boot sources " ...please help ...:-/
Im sitting with this phone already 3 days ...I start to hate it ....I had windows 6.5 then I put Android on but the problem was that i couldn't get right radio ...so I didnt had 3G/H ......does anybody know if there are some special link for HTC HD 2 Leo T-Mobile 1024....???step by step how to put on android with working i-net connection?????
Did you install Clockworkmod? Can be found here
renars.k said:
I dont get it ....I have problems with this (when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache) I cant get there when i go to ad recovery it says "no boot sources " ...please help ...:-/
Im sitting with this phone already 3 days ...I start to hate it ....I had windows 6.5 then I put Android on but the problem was that i couldn't get right radio ...so I didnt had 3G/H ......does anybody know if there are some special link for HTC HD 2 Leo T-Mobile 1024....???step by step how to put on android with working i-net connection?????
Click to expand...
Click to collapse
Hi,
Sorry,I've been really busy.
Try in the order of things...
1.use toolkit to install HSPL 2.08 HSPL
2.Task 29
3.Flash radio
4.install magldr and so on from there.
Then the rest is the same on the list.
Am I getting the error message “Error Description: USB init failed” because I don’t have a sd card in the phone? Is that where I am going wrong?
make sure that the files initrd and zimage are copied to the root of the sd card. do not copy the whole foler bec magldr will not be able to recognize it.
hello
i want to install [3.May.11][MAG/cLK] NexusHD2-Gingerbread V2.7 [GRJ22/Android2.3.4][Kernel:tytung_r10]
but after i flash clk or MAGLDR the phone wont boot anymore it stucks on htc logo dont know why and i had android before but i flashed to winm 6.5 stock and now i want android again...
what im i doing wrong ?
ssj3g0ku said:
hello
i want to install [3.May.11][MAG/cLK] NexusHD2-Gingerbread V2.7 [GRJ22/Android2.3.4][Kernel:tytung_r10]
but after i flash clk or MAGLDR the phone wont boot anymore it stucks on htc logo dont know why and i had android before but i flashed to winm 6.5 stock and now i want android again...
what im i doing wrong ?
Click to expand...
Click to collapse
Hi,
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
ssj3g0ku said:
but after i flash clk or MAGLDR the phone wont boot anymore it stucks on htc logo dont know why
Click to expand...
Click to collapse
wrong radio OR wrong hspl
It MUST be 2.08.hspl and any radio 2.07.50 or higher, but MUST be .50, not .51
yeah radio was the problem,i managed to install 2.2 and worked good but the in call sound was... not so good.not sure what android version or rom should i choose
now im back to windows mobile its so slow
i have the hd2 512 version
try another radio.
i use Radio: 2.15.50.14
is known bug that some radios make an robot voice. but sometimes it is only in the first call, second one is ok...... try it pls
Stuck in magldr its wont reboot back to wm6.5 is there anything i can do
generally
wrong recovery size or kernel problem
you have to use preffered recovery size and kernel if it is not working (recovery size) other options flash a new kernel tytung or hieros etc...
hey i got a realy ****y black screen when i update from windows to android withe green htc in the midle of the screen i got the right radio and spl and hspl i tryed several roms whithout results plz help me im struggle withe it the 6 hours
ps* sorry for the bad engels im from the nederlands
112arjan112 said:
hey i got a realy ****y black screen when i update from windows to android withe green htc in the midle of the screen i got the right radio and spl and hspl i tryed several roms whithout results plz help me im struggle withe it the 6 hours
ps* sorry for the bad engels im from the nederlands
Click to expand...
Click to collapse
Hi,
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
ty for te reply!
malybru said:
Hi,
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
Click to expand...
Click to collapse
i try it right now!
omg!
malybru said:
Hi,
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 cache)
Repartition according to ROM requirements.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card (which you should have placed on the root of your sd card)
reboot.
Give it time.Some ROMS take 15-20 minutes to install.
Click to expand...
Click to collapse
omg dude u safe me! it works thank you thank you thank you! love you! my hero!
sounds like the incorrect partition size for the rom was used, thats the reason it hung on the logo
JUP
i think taht was my foult but its fixed now thank god! and tank you!
I already have an android nand on my phone, the Energy Sense 3.5 but I would like to install this one: http://forum.xda-developers.com/showthread.php?t=905060&highlight=nexushd
So can I skip the installation of the HSLP, Magloader, custom radio and just skip to the part where I flash the ROM? Also I would like to put my other 8GB SD card into my phone, so I should create an EXT partition of it, right?
Installation Guide for MAGLDR 1.13:
Flash MAGLDR
Download MAGLDR 1.13 (606 KB)
Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
Flash ClockworkMod Recovery
Download MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip (5.0 MB)
Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
Run DAF.exe to flash ClockworkMod Recovery 3.2.0.0 (recovery_3.2.0.0_leo.img).
Flash Android ROM
Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
Flash NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip (83.58 MB)
The ones who can read are clearly in advantage.
You dont need to install hspl or radio when you have it. But task 29 would be good, than magdlr cwm and rom
Thanks! So I should back up my ROM, install the NexusHD2 CWM, and then flash the nexushd2.zip .
Should work , but i have had a problem with bootloop by nexushd and i must'v installed windows 6.5 stock rom, than magdlr than cwm with new partition and than rom
WoW I have managed to install it in notime, thanks!
you can also skip the task 29 / magldr steps too, most times, unless you have an actual problem.
Enter cwm and do a 'wipe data/factory reset' after you back-up, and before you flash the new one, is usually good enough. It has the added benefit of also clearing the system folders on the EXT and FAT32 on the sd, since task 29 doesn't touch those. (you should do this step even if you do task29, unless you format both sd partitions, which is silly.)