I'm running 7.0.3 from an SD card using verygreen's instructions, and loving it.
However, I used the latest installer image (1.3), which you're not supposed to use unless you install nightly 87 or later. Mistake. The problem with this is that it seems you can't boot into recovery using any method, and I've tried lots. I see others have the same problem.
If I want to upgrade to 7.1.0, can I do it using ROM Manager? Download, backup current rom, etc., and install? I've got things set up the way I like, I don't want to lose everything or start from scratch.
Any suggestions?
Y'all are geniuses!
Rom manager only works for roms on internal memory. If cannot access recovery you are going to have to reformat and start from scratch.
Sent from my phone using Tapatalk
Thanks, that's what I needed to hear. I'm new to this, it's probably assumed knowledge for most.
I reinstalled with the latest nightly, and learned how to use Titanium Backup, so all is well.
Related
Hey guys i've been on the forums for the longest but just never posted, long time reader though. Ok so i'm new to android and love it , i have a nexus one and have had it for about 4 months now, bought it from someone on craigslist for about 450 brand new, worth every penny and is treated as my firs born. Rooted but never installed a custom rom, was nervous i would ruin something. Seeing how there are so many options in custom roms, i really want to install cyanogen now, only problem is that i updated to frg83d, so can i still install cyanogen? if so can someone give me a link or a little help? i know gb will be here soon but not sure when and i'd like to add enhance my phone a little, also if i were to install a custom rom how hard would it be to then install gb would it need to be reflashed back to the stock rom? tia.
If you updated to FRG83D and rooted...(not rooted and updated, for updating OS will unroot your phone)
1. Using ROM Manager is the easiest way for starters.
- Download ROM Manager from Market.
- Run ROM Manager, then flash Clockwork Recovery into your device.
- Once it is done, make your nandroid backup first by choosing 'Backup Current ROM'. It's a 'must', so you can restore everything when flashing custom ROM goes wrong.
- Backup your account, application & data. You'll need to restore them after installing custom ROM(when rooted, backup tools like My Backup Pro can backup application data).
- Dump everything in your SD card to HDD in case.
- Now partition your SD card. It's optional, but needed for A2SD+. SD card will be formatted during partitioning. Once it is done, copy your backups to SD card.(backup is always a must)
- Download custom ROM you want, copy it to root of SD card.
- In ROM Manager, choose 'Install ROM from SD Card'. Then Clockwork Recovery will do the things.
- Done!
2. If you downloaded and flashed other recovery like Amon Ra's, you'll need to do all the job in the recovery mode. However, it's not much harder than using Clockwork Recovery and ROM Manager.
**Currently, many custom ROMs(which are still developing) are based on FRG83(D). Once 'completely' working Gingerbread(current build: GRH55) ROM is out, such custom ROMs will be updated.
**Read other topics, especially pinned ones. Usually they cover things you want to know.
Thanks for the quick response lfact, but i'm having a problem, whenever i try to install rom from sd card and it goes to install i get a screen with the android and an exclmanation point, any reason why?
Make sure you flashed custom recovery on your device. Oh, and.... If you have any question, post that on Q&A, not general.
Got everything working lfact thanks alot, mods sorry if this was in the wrong section.
Good day all. I recently bought a Nook Color. I'm running CM7.0.2 along with gapps 20110613 from a 16gb SanDisk class 4 SD. When set up the apps (after enabling wifi) I got an error, due to the fact that my sucky router dropped the signal. As a result of this I was not able to download gmail, google maps, etc. My android market runs perfectly but I wanted to flash gapps so as to download gmail and the others. I went into ROM manager and updated to the latest CWM. However, no matter what I do I can't but into recovery. I tried n+power button, reboot into recovery from the power button menu, and from within ROM manager. All no go...it just booted into CM7, so I removed the SD card to boot into stock Nook 1.2 software. When I did this it brought me to the CWM recovery menu (SD card not in). Of course I could not select anything on the menu. Put back in the SD while still in the menu to try select an option but nothing. Shut it down by holding the power button and booted it back up and it went str8 into CM7. Shut down took out SD and it booted into stock Nook 1.2 software. What am I doing wrong guys? I'm trying to flash the overclock kernel and reflash gapps. THANKS
Could the reason gmail, youtube, googlemaps didn't install on setup be due to the fact that I'm not in the USA? If so I'd still like to know what the problem is so I can flash the overclock kernel.
No one has any idea? I know one option is to backup and redo everything, but I'd really like some troubleshooting ideas before.
Did you use the 1.3 image from verygreens thread? If so the old 7.0.* stables are not supported. You will need to back up and redo it either with the old image or a new CM7 version.
---
- Sent from my LG Optimus V using Tapatalk
Yea I used the 1.3 in the thread with 7.0.2. What version cm7 would I need to use with the 1.3? 7.0.3 or a nightly,? Where would I be able to find an older image to work with 7.0.2 and what version of the image should it be?
The 1.3 image won't work with any 7.0.* versions. You should upgrade to either a recent nightly or the 7.1.0 RC. You could find an older image somewhere but there isn't much of a point as you would have to redo it all anyway so why not upgrade? Plus your battery life will improve by a lot as 7.1 RC and the nightlys have deep sleep.
---
- Sent from my LG Optimus V using Tapatalk
As I said many times to newbie who runs CM7 off uSD that do not or should not mess up with ROM Manager. In fact, there are members also confirm that if booting off uSD, ROM Manager has no effect.
Based on what you, OP, described, you had flashed the CwM into the internal memory.
Keep your fingers crossed as I do hope you didn't screw up anything else.
Anyway, using verygreen's 1.3 image along with the latest nightly-built CM7 and the latest 06132001 gapps and boot it off uSD again. You should be fine.
Before that, fix your home wireless network first.
I decided to just go with 7.1RC1 since I wanted the better battery life. Is there a way to check about the CWM on the internal and how would I go about removing it if I did? I ask for warranty purposes ofcourse since I opted for the 2 year extended one. Also to flash upgrades and such, since you don't recomend using ROM manager then how should I go about doing it (i.e. overclocking kernel)?
dna59 said:
I decided to just go with 7.1RC1 since I wanted the better battery life. Is there a way to check about the CWM on the internal and how would I go about removing it if I did? I ask for warranty purposes ofcourse since I opted for the 2 year extended one. Also to flash upgrades and such, since you don't recomend using ROM manager then how should I go about doing it (i.e. overclocking kernel)?
Click to expand...
Click to collapse
1. I never have any issue related to battery with any nightly build that I've ever used. I am currently having the nb153 and it is fantastic.
2. Check CwM and how to remove off the internal memory? I don't know any quick way except restoring the original ROM.
Again, for warranty purposes, strongly suggest running off uSD
3. Updating by loading/copying/dragging the updated files onto the root folder (aka "boot" partition), then TRY loading into Recovery by:
a. combination of power/N buttons if you have skill or
b. let it boot normally into CM7, wait until completely loaded, then reboot and select "recovery" option. Keep yr fingers crossed. This is an easy method but if it doesn't work then option a is the only choice.
Sorry the battery issue was as compared to the current CM7 stable not the nightly. I got everything installed so far besides the overclock kernel. So I will try your recommendation for booting into recovery not using ROM manager.
You don't flash anything when running off an sd card you just boot into recovery and then reboot. Easiest way to get the overclock kernel would be to just upgrade to the latest nightly.
---
- Sent from my LG Optimus V using Tapatalk
My MIUI rom is MIUI-108050 version and though it's pretty nice when working, I can't enter the Market without it crashing and I can't get it to enter Bootloader or Recovery. Titanium Backup nor Clockwork Recovery nor Rom Manager are available - for some reason they are gone or not accessible. Titanium Backup shows in my App Manager, but it doesn't show in App tray. So my Nook Color is stuck with a barely working MIUI Rom. Does anyone have a suggestion for getting to a different Rom or for getting back to stock?
I briefly tried MIUI and had pretty much the same problem. I read somehwere else that you have to do a complete wipe when you first install it. I haven't bothered going back to confirm if that works, but it might be worth a shot.
Make a new SD card with CWM image on it. I have had great success with eyeballer's image and instructions:
http://forum.xda-developers.com/showthread.php?t=1030227
Then load zip file one of the roms on SD card. 1.11.4 is the latest MIUI rom available at miui.us (my rom of choice)
http://roms.miui.us/
Turn off nook. Load SD card. Turn on nook. In mounts and storage (if it isn't there on initial.screen, tap the power button to go back) format data, format system. Clear cache. Then install zip file of rom.
If my directions don't make sense, post back and I will give you a very detailed list of steps.
Sent from my NookColor using xda premium
I had similar problems with MIUI on NC. I finally had to move to a different ROM. I currently running Phiremond 7.1 and it is very stable.
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
As long as you fully wipe using Amon Ra, you should be able to make most updated ROMs run fast on your phone. Perhaps try reflashing Synergy. I also recommend flashing a new ROM, but reinstalling apps without data. Perhaps that is contributing to the sluggishness.
Sent from my PC36100 using XDA App
Thanks.. But I've been told over and over, its sometimes good to revert back to stock..
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Anyone have the stock file??
Do I let it update or no ??
fastfed said:
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Click to expand...
Click to collapse
That's ridiculous. A wipe is a wipe.
In fact, using the RUU (.exe) is riskier since it flashes radios and such, and if something goes wrong during, you have a bricked phone. Just do a full wipe including cache/dalvik cache and install your ROM of choice, along with a good kernel.
fastfed said:
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
Click to expand...
Click to collapse
If you rooted with unrevoked or revolutionary, you will need this file to return to stock, and yes, you will temporarily lose root.
http://dl.dropbox.com/u/38127313/Un....15.00.0808_NV_2.15_release_220182_signed.zip
Change the name to PC36IMG and run it from the root of your SD card through the bootloader. You will lose your root, but your security flag should still be off (S-OFF) so that you can quickly regain root after running this file, after changing it to PC36IMG in place of the first one. (It is Amon-RA and not clockwork. You can reflash clockwork later if you want, which I don't recommend.
http://dl.dropbox.com/u/38127313/Root 2.3.3/PC36IMG3.08.zip
Also, you might need to flash a superuser app, in case you need root inside the stock ROM. Here is an old one, but it should still work for you.
http://dl.dropbox.com/u/38127313/Root 2.3.3/su-2.3.6.2-efgh-signed.zip
Like the previous users said, it's probably not necessary, but I'm just giving you what you asked for.
hmmm.. so now its not necessary ? I was always under that impression..
Ok..
Anyone know what the new HOT rom is ??
Gigerbread please ?
Like I said I was using Synergy..
Used Fresh before and a couple others..
whats the hot rom ??
FYI I also partitioned my SD card, or whatever its called.. For the gigerbread thing..
Put MikG 3.0 on it and call it done. Rock solid ROM, great battery life, and awesome tweaks built in. It will be like an all new phone. Enjoy
Sent from my PC36100 using xda premium
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Use "Best Method" for Cleanest way (Wiping)
OLDER: Froyo v2.2 (3.70.651.1) http://keetsa.com/files/RUU_SuperSo...15.00.11.19_NV_1.90_release_161482_signed.exe
Most Current version is "Gingerbread v2.3.3 (4.54.651.1).EXE" http://www.multiupload.com/LLV12N2WU8
with "xxx.EXE file", You'll need to Run it on Widows and install on Phone thru Micro USB plug.
BEST Method to install Most Current STOCK ROM:
1. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "AmonRa Recovery v3.11-gnm" http://dl.dropbox.com/u/34586908/PC36IMG-ra-supersonic-3.11-gnm.zip
2. (Boot into Recovery), WIPE these 8 lines (All data/factory Reset, /data, /cache, /sdcard/.android_secure, /system, Dalvik-cache, battery stats, rotate settings)
3. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "GB v4.54.651.1.ZIP" http://db.tt/Ck6AB18E
If you want non Stock Recovery + Rooted:
1. Rename your "(AmonRa Recovery v3.11-gnm) PC36IMG.zip" to "PC36IMG.zip" again. (Boot into Recovery +Install). (cus Stock Rom changed you to STOCK Recovery)
2. (Boot into Recovery + Install) "Root (Superuser-3.0.7-efghi-signed).zip" www.mediafire.com/?16a07x3800wvak6
No need to revert to stock.
Use vr superwipe
Save the contents of your sd card to a computer, then reformat the sd card
Wipe everything on the wipe menu, then flash a new ROM.
copy the titanium backup directory back to your sd card and restore apps without data first, then restore data of any games or what not.
Problems should be fixed.
Sent from my PC36100 using Tapatalk
You have a lot of options here. As the preceding posts may have eluded to. Depending on how consistent and deep your issues are, there are different steps that need to be taken.
You can always wipe the ROM and reflash. Do a dirty flash, by just wiping cache and dalvik, then reflashing. That tends to be my temp work around sometimes.
Worst case I've seen is reverting to stock. Unrooting. And starting back over.
With any new ROM you'll need to reflash your mods. Becareful tho of what mods you're using. Not all are compatible across the board.
HipKat said:
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Click to expand...
Click to collapse
Did reformatting the SD card help? I just realized and did the same thing. It had been a good 3-4 from changes and about a year since I formatted my card.
It helps a lot. I reformat mine about every 3-6 months
Swyped From The Hippest MIUI'd phone Using XDA Premium
So I finally got arround to getting my Nook up-to-date from 7.1 to the 7.2 encore CM7 rom. Thought that Rom Manager would take care of everything for me, and it looked like it was well on its way.
So it finally downloads and I'm all excited to install it, maybe it'll help the random hanging errors when I'm on wifi. (dummy me) Selected just to wipe dlavick (sp?) cache and not backup current rom, and durring the install, it reports a critical error and fails out. Okay, fine, sounds good, i'll just hop online and figure out how to manually install it. I reboot, and it just hangs. Wierd, but I reboot again. And again. And I finally come to the conclusion that it must have screwed over my old rom as well.
If anyone can give me an idea of how to proceede, do i reflash a new rom? And how do I go about it without damaging the current files that I have installed, I've got a few hundred ebooks and comics that i'd hate to lose.
breakneat said:
So I finally got arround to getting my Nook up-to-date from 7.1 to the 7.2 encore CM7 rom. Thought that Rom Manager would take care of everything for me, and it looked like it was well on its way.
So it finally downloads and I'm all excited to install it, maybe it'll help the random hanging errors when I'm on wifi. (dummy me) Selected just to wipe dlavick (sp?) cache and not backup current rom, and durring the install, it reports a critical error and fails out. Okay, fine, sounds good, i'll just hop online and figure out how to manually install it. I reboot, and it just hangs. Wierd, but I reboot again. And again. And I finally come to the conclusion that it must have screwed over my old rom as well.
If anyone can give me an idea of how to proceede, do i reflash a new rom? And how do I go about it without damaging the current files that I have installed, I've got a few hundred ebooks and comics that i'd hate to lose.
Click to expand...
Click to collapse
Go to my tips thread linked in my signature and make a bootable CWM SD per my item A10. If your books and comics are on SD do not use that SD for CWM, use a different one. Then you can flash the new CM7.2 ROM with that. It should boot fine for you. If it still balks on you, go back to CWM and do a wipe data/factory reset. That will wipe out the installed apps and settings, but will not effect the books and comics you have on your media partitions (emmc and sdcard). But you will have to reinstall all of your apps.