Database Users

[Q]Looking for Wildfire Stock ROM Build 1.25.720.1

Guys,
I recently rooted my HTC Wildfire successfully using Unrevoked3 now I would like to return to the original state of my wildfire.
Before rooting my phones Build number was 1.25.720.1 which i cannot find anywhere, if anyone can help would be really thankful.
Please help me find my stock ROM, waiting eagerly
Thanks.

http://www.shipped-roms.com/shipped/Buzz/

I made a nandroid backup of my original rom before i tried many roms. In this way i can go back to the orginal state in e few minutes.

Thanks....for the quick reply but I have checked the site you have mentioned but I cant find the version I'm looking out for....
My biggest mistake was not making a backup of original ROM

Will my Nandroid Backup will help you.. if so, i can send you my nandroid backup..

Hi Guys,
Sorry to hijack this thread but my friend has just bought a Wildfire and his software version is 1.28.421.1
Before rooting, I would like to make sure that it can be unrooted but I cannot find that RUU version on the shipped-rooms link from the post above.
Can I do a nandroid backup without rooting the phone?
Or what else can be done to ensure that the phone can be unrooted in the future?
Thanks
Shiraz

mac4rfree said:
Will my Nandroid Backup will help you.. if so, i can send you my nandroid backup..
Click to expand...
Click to collapse
Thanks...but your nandroid backup must be after you rooted your device if that's the case then it will still be rooted and will have the superuser icon....if you managed to take a backup before rooting then your backup could be of great help
Please let me know

torque2584 said:
Thanks...but your nandroid backup must be after you rooted your device if that's the case then it will still be rooted and will have the superuser icon....if you managed to take a backup before rooting then your backup could be of great help
Please let me know
Click to expand...
Click to collapse
i do not think we could take a backup without rooting the phone.. (correct me if i am wrong)... so sorry cudn help u then..

so, summary is, nanroid can't UNROOT your phone to original form, right?
how to get back to original state. My original Stock ROM was 1.25.707.1, which I couldn't get from shipped-rom.
Can I simply use the closes ROM available 1.25.405.1 ??
Will it brick my phone?

mee too...
torque2584 said:
Guys,
I recently rooted my HTC Wildfire successfully using Unrevoked3 now I would like to return to the original state of my wildfire.
Before rooting my phones Build number was 1.25.720.1 which i cannot find anywhere, if anyone can help would be really thankful.
Please help me find my stock ROM, waiting eagerly
Thanks.
Click to expand...
Click to collapse
need it......stock ruu...

I don't know why you guys want to get back to a stock Rom !
What's it worth ? You'll be missing the best part of your device !
I first had a thought like "flash makes it run out of guarantee",
but believe me guys, I did a try and installed my backup just to see it again,
and I've come know that CyanogenMod is far and away better !
Try to contact hashimjamal on the forum, he's got the one you want !
See this link : http://forum.xda-developers.com/showthread.php?t=816871&page=2
Firmware version
2.1 update 1
baseband version
13.45.55.24H_3.35.15.31
Kernel version
2.6.29-c9472fc1
[email protected]#1
Tue Aug 10 18:57:37 CST2010
Build Number
1.25.720.1 CL227575 release-keys
Software Number
1.25.720.1
Browser version
Webkit 3.1
So maybe you could email him and ask for his backup !!!
Cheer Up!

omg can you please send me your stock rom back up?? because i seem to have lost mine... and i'm in desperate need of it.

sony ericsson x8 Problems

hi..i buy my x8 1 week ago and i put the 2.3.2 rom..its work very fine..next, with xrecovery, i put the original backup, the 2.1 original backup, and when i plug in the charger in telephone, the phone turns on..why? sorry for my bad english, im portuguese..

It is caused by xrecovery

and no way to fix this problem?? is this normal? thank you

quick solution is by removing xrecovery joking!! hehe yes i hear that theres a solution by [email protected] one of xrecovery file..but dont remember which thread..try to dig this section more deeper

Install latest xRecovery with FlashTool 0.2.8 and it will work, and is the best solution.

thank you all..but latest xrecovery only install with flash tool? no other way?

No other way... but why would that be a proble for you?

it's no a problem, but i like charge my phone offline..i see in other thread or site, if i modify the chargermon file with notepad, the phone charge offline..is this true?? what the code for this?

I believe the answer is covered in this thread
http://forum.xda-developers.com/showthread.php?t=998063
Thanks

thank you I have not tried but should work thanks men

As I already said, simply download FlashTool 0.2.8, click Ask Root Permissions, click xRecovery, and it's solved. You can even reboot to recovery directly without having to press back button, through FlashTool

it works thanks blagus

I have some questions:
in roms of racht, he says it is necessary install the baseband 015..some people says if you dont install this baseband, the rom dont work properly..but i install the rom with baseband 006 and the rom works good, so i dont understand if works, why i need change the baseband, this is my first question..
My second question is what is the difference between install roms with xrecovery using restore option and flash a rom with a flashtool?
my third question is about my original baseband..my original baseband is 006, compilation 2.0.1.A.0.47..i can even install the baseband 015..but if i need to take my telephone to the warranty? i need install the original baseband, right? but the basebands 006 of blagus or racht thread are 2.0.2.A.0.24, and mine is 2.0.1.A.0.47. i need the original. i need help. thank you all sorry for my bad english, im portuguese.

[HELP]Please Help , No Signal

look my english is bad so ill tell whats my problem by steps and please help me please ...a.i had original rom 2.1 frome the selolar compeny.
b.i root my phone install recovery.
c.i install TW 007 2.2.1 Froyo Rom , all was fine everything work just fine but not led or zoom but its not importent..
d.i installed "Iris" TripMiui 2.3.4 rom , i didnt get signal so i tryd put BaseBand 52 , but in the end all i need was to click Crash System.
e.i whanted to go back froyo rom but i didnt get signal so itryid restore my original rom and even ther i didnt got any signal .
please guys\girls help me , is it the new base band ? i dont know what to do please im hopless ::(((

Did you wipe data cache and dalvik before restore
dornabet said:
look my english is bad so ill tell whats my problem by steps and please help me please ...a.i had original rom 2.1 frome the selolar compeny.
b.i root my phone install recovery.
c.i install TW 007 2.2.1 Froyo Rom , all was fine everything work just fine but not led or zoom but its not importent..
d.i installed "Iris" TripMiui 2.3.4 rom , i didnt get signal so i tryd put BaseBand 52 , but in the end all i need was to click Crash System.
e.i whanted to go back froyo rom but i didnt get signal so itryid restore my original rom and even ther i didnt got any signal .
please guys\girls help me , is it the new base band ? i dont know what to do please im hopless ::(((
Click to expand...
Click to collapse
Sent from my X10 X10projectMiUI using XDA App

try to flash original 2.1 firmware through flashtool or repair with SEUS.

Try to post in the right forum
Sent from my x10 on gingerbread

go to dev tools > bad behavior> crash system server> wait for the reboot

Lion3494 said:
Try to post in the right forum
Sent from my x10 on gingerbread
Click to expand...
Click to collapse
The person needs help, the best place for that is here with his issues. Its good he has received help in this forum, and your type of reply is unwanted in this forum.
Sent from my X10i using XDA Premium App

Thread moved to proper forum.

This worked for me OP.Restore to 2.1,flash .52 bb and then install your custom ROM.

thats not right. If you want baseband .52 then you must flash Generic version 2.1update1 build 2.0.A.0.504. If you flash or have Generic version 2.1update1 build 2.0.2.A.0.24, then you'll have no signal when you apply baseband .52 patch. Therefore in plain English, flash Generic version 2.1update1 build 2.0.A.0.504, then flash baseband patch .52 and then flash the rom you want.

Need help getting back to Froyo

Hi Guys,
I am really sorry if this is a repeated post,
I am not a expert but can follow instructions very well,
I am using a Dell Streak 5 and it was shipped with 2.2 and i recently upgraded to 2.3.3(Olleh) version and the base band version is 357 and the kernel is 2.6.35.7-perf and i am not liking this version of OS and i want to get back to the original OS which was shipped with the phone.
The phone is rooted as well.
My friend did this for me,I am not sure how he did this.
Can anyone help me step by step on how to get back to factory installed 2.2 version??
That would be a great help for me if anyone can help me with this.

Ok...so your 2.2.2 version was 357, you went to 407 and now you want to go back to 357?
The basic steps to flash a ROM are found in the Dell Streak wiki. There is additional information in the thread titled "Everything you always wanted to know about the Streak but were too busy bricking it" that may be helpful. With those two sources of information there is no need to give you a detailed how-to since it has already been done. The main thing you need to do other than following the directions is download the 357 recovery and the 357 update package from the wiki.

Hi i looked for 357 package and its no available in wiki,
Any idea where i can get them from??
cant i try the lates version??

357 is only available preinstalled on devices, there's no way to return to it as the pkgs are not available for it.

Hi Thank you for replying me back,
Can i install any other package apart from this??

If you want Froyo, flash Streakdroid 1.9.1. You'll find it here. http://forum.xda-developers.com/wiki/Dell_Streak_5/ROMs

uday2012 said:
Hi Thank you for replying me back,
Can i install any other package apart from this??
Click to expand...
Click to collapse
I didn't look at the list of ROMs so I had no clue 357 was a preinstalled ROM. Sorry about that. Use 360 instead. It includes some apps Dell thought might be useful but are also easily removed. What it doesn't have is bloatware forced on it from the cellular service providers.

HI Guys,
Thanks for your valuable replies,
I have fixed the issue,
Let me tell you what i have done so that others can try.
I have initialised fastboot and used flashrecovery 0.8 and used 357 ROM and after the phone rebooted after the flash i HELD THE VOLUME DOWN KEY AND THE POWER BUTTON AND THE PHONE STARTED TO BOOT FINE.

uday2012 said:
HI Guys,
Thanks for your valuable replies,
I have fixed the issue,
Let me tell you what i have done so that others can try.
I have initialised fastboot and used flashrecovery 0.8 and used 357 ROM and after the phone rebooted after the flash i HELD THE VOLUME DOWN KEY AND THE POWER BUTTON AND THE PHONE STARTED TO BOOT FINE.
Click to expand...
Click to collapse
Where did you find rom 357 ???
Can anyone send me its nandroid excluding data.img ??? It will be a great help.
Thanks in advance.
Sent from my Dell Streak using XDA

Don't go back to Froyo, go all the way to CM7!
Once you're at 407 rom go the next step and go CM7:
http://forum.xda-developers.com/showpost.php?p=23527490&postcount=216
You MUST try out CM7 on the streak. You MUST!

[Q] Help!! X10a screen touch stopped working after flashing 2.3.3 firmware

Hi all,
I have flashed my x10a with flashtool and x10_2.3_aro_2.ftf firmware. But after the flashing is finished, my phone screen touch is not working. What can I do now? I am unable to install xrecovery to install another rom bcoz screen touch isn't working. So I can't install any custom ROM. What is the solution for me now?? :crying:

me.amar said:
Hi all,
I have flashed my x10a with flashtool and x10_2.3_aro_2.ftf firmware. But after the flashing is finished, my phone screen touch is not working. What can I do now? I am unable to install xrecovery to install another rom bcoz screen touch isn't working. So I can't install any custom ROM. What is the solution for me now?? :crying:
Click to expand...
Click to collapse
Use PcCompanion

ye afaik the 2.3 Aro is an X10i Rom..
try the method posted above.
Repair your phone via SEUS.

Tekkpriest said:
ye afaik the 2.3 Aro is an X10i Rom..
try the method posted above.
Repair your phone via SEUS.
Click to expand...
Click to collapse
I tried with X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200.ftf this firmware too.. And I need to drag the status bar downwards to connect to PcCompanion. That I can't do because my screen isn't working

To repair your phone you just need to have the physical buttons working
Go to SEPCC / Sony Support Zone -> Software update -> repair phone (might be some other translations or words, as i am translating from the german version)
Go through the steps, and you will be asked to connect your phone in flashmode, which you can access by pressing and holding the back button while you turn on your phone.
After you do that, you have to wait for downloads etc to finish, and SEUS will flash back to stock.
edit: You will loose your personal data, which is stored on the phone.. Your SD Card will be untouched though

Tekkpriest said:
To repair your phone you just need to have the physical buttons working
Go to SEPCC / Sony Support Zone -> Software update -> repair phone (might be some other translations or words, as i am translating from the german version)
Go through the steps, and you will be asked to connect your phone in flashmode, which you can access by pressing and holding the back button while you turn on your phone.
After you do that, you have to wait for downloads etc to finish, and SEUS will flash back to stock.
edit: You will loose your personal data, which is stored on the phone.. Your SD Card will be untouched though
Click to expand...
Click to collapse
Thank you I will try it ...

Tekkpriest said:
To repair your phone you just need to have the physical buttons working
Go to SEPCC / Sony Support Zone -> Software update -> repair phone (might be some other translations or words, as i am translating from the german version)
Go through the steps, and you will be asked to connect your phone in flashmode, which you can access by pressing and holding the back button while you turn on your phone.
After you do that, you have to wait for downloads etc to finish, and SEUS will flash back to stock.
edit: You will loose your personal data, which is stored on the phone.. Your SD Card will be untouched though
Click to expand...
Click to collapse
Please post download links for your TekkDroid ICS v1 rom, TDKernel v1 please. I am on unlocked bootloader with ICS V1 4.0.4 FERALAB rom, FeraKernel Xperia X10i. want to try your rom.

While I tried to update with PC Companion error came like this, "There is no software available for your phone. Please try again later". What might be the solution for this?

Please post download links for your TekkDroid ICS v1 rom, TDKernel v1 please. I am on unlocked bootloader with ICS V1 4.0.4 FERALAB rom, FeraKernel.
Xperia X10i. want to try your rom.

rkj2ban said:
Please post download links for your TekkDroid ICS v1 rom, TDKernel v1 please. I am on unlocked bootloader with ICS V1 4.0.4 FERALAB rom, FeraKernel Xperia X10i. want to try your rom.
Click to expand...
Click to collapse
I download firmware for x10a from this link http://dl.dropbox.com/u/35462802/X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200.ftf

rkj2ban said:
Please post download links for your TekkDroid ICS v1 rom, TDKernel v1 please. I am on unlocked bootloader with ICS V1 4.0.4 FERALAB rom, FeraKernel Xperia X10i. want to try your rom.
Click to expand...
Click to collapse
It's still in development.. :/ And the current version has some FC's etc.
@me.amar
Get back to real Stock first. And check if your Touch is working properly

How can I get back to stock rom, from where can I download it, I m searching this since 3 days. Its my 4th day without phone.

Use the method i described on page 1..
with using SEUS (PC Companion) you as a person won't have to flash anything, it will be downloaded and flashed automatically by Sony.

Tekkpriest said:
Use the method i described on page 1..
with using SEUS (PC Companion) you as a person won't have to flash anything, it will be downloaded and flashed automatically by Sony.
Click to expand...
Click to collapse
I already told that, sony said software not found for your x10 while I tried to flash from pc companion. Anyway thank u for you reply. What sud I have to do now?

Anyone please help me... PC Companion said no software available for my phone.

me.amar said:
Anyone please help me... PC Companion said no software available for my phone.
Click to expand...
Click to collapse
try flash another kernel using FT..then u can flash another rom.