I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer "please transfer proper installation file" ..what can be wrong , I did downloaded the file many times from different file locations?
Hope someone knows the solution
Thanks
paterdamiaan said:
I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer "please transfer proper installation file" ..what can be wrong , I did downloaded the file many times from different file locations?
Hope someone knows the solution
Thanks
Click to expand...
Click to collapse
Hey,
Did you extracted the installation file out of the downloaded zip file?
Inside the downloaded file there is a archive file again (forgot what format), this file you have to extract out and copy that file onto your archos
Good luck!
Lenn said:
Hey,
Did you extracted the installation file out of the downloaded zip file?
Inside the downloaded file there is a archive file again (forgot what format), this file you have to extract out and copy that file onto your archos
Good luck!
Click to expand...
Click to collapse
Yes , thats the thing I did , file named UrukDroid-install.tgz copied to the device like it written in the installation procedure ....no need to unzip that one also
Try to download this file:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/UrukDroid-install.tgz
It is directly and no need to extract any more.. maybe your archive manager does something wrong..
Lenn said:
Try to download this file:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/UrukDroid-install.tgz
It is directly and no need to extract any more.. maybe your archive manager does something wrong..
Click to expand...
Click to collapse
Lenn same thing ...please transfer proper installation file , and ask for another transfer
paterdamiaan said:
Lenn same thing ...please transfer proper installation file , and ask for another transfer
Click to expand...
Click to collapse
drives me crazy ... ..the very last phase is going wrong ..so close....
Okey... me too
Maybe tjeres something wrong with the kernel
Download the zImage and the initramfs as single files from here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/
Then flash the kernel again, like you did it before (via the recovery menu)
After try the installation with the as single file downloaded installation file
Lenn said:
Okey... me too
Maybe tjeres something wrong with the kernel
Download the zImage and the initramfs as single files from here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/
Then flash the kernel again, like you did it before (via the recovery menu)
After try the installation with the as single file downloaded installation file
Click to expand...
Click to collapse
Lenn, this is different , another problem ...after flashing the kernel with the "let's say " new files , what is going fast then going into the developer menu ..archos needs to reboot in that menu and I should get UrukDroid 1.0 Installation framework and select simple installation ..but does not get to that boot ....the original archos kernel completely starts up .
Let me know tomorrow ....we need some sleep being busy with this whole day
I wanted to thank you for the given support for now ..hope someone will know the answer
paterdamiaan said:
Lenn, this is different , another problem ...after flashing the kernel with the "let's say " new files , what is going fast then going into the developer menu ..archos needs to reboot in that menu and I should get UrukDroid 1.0 Installation framework and select simple installation ..but does not get to that boot ....the original archos kernel completely starts up .
Let me know tomorrow ....we need some sleep being busy with this whole day
I wanted to thank you for the given support for now ..hope someone will know the answer
Click to expand...
Click to collapse
Lenn , any new ideas about a solution since yesterday ?
paterdamiaan said:
Lenn , any new ideas about a solution since yesterday ?
Click to expand...
Click to collapse
I may didnt uhderstand you right,but:
Did you boot into the Developer Edition after flashing the new kernel?
You have to, urukdroid is the "new" SDE after the installation
Lenn said:
I may didnt uhderstand you right,but:
Did you boot into the Developer Edition after flashing the new kernel?
You have to, urukdroid is the "new" SDE after the installation
Click to expand...
Click to collapse
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
paterdamiaan said:
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
Click to expand...
Click to collapse
... unfortunality i have no idea atm....
Maybe your disk has a failure... try to completly wipe your archos again install the newest archos firmware directly after the update and try it again...
Sorry, i think but i dont see any solution yet...
paterdamiaan said:
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
Click to expand...
Click to collapse
recap
Flash initramfs.cpio.gz and zImage from SDE boot menu is working fine
after going into
Boot to SDE:
power on (2) Archos, hold up/+ volume key (1) until you see "Archos AXXXX - Boot Menu",
choose "Developer edition" is also working
You should see "UrukDroid 1.0 Installation framework" title. Please choose simple install method. is working well
When asked to, connect Archos to PC (5) once again and copy UrukDroid-install.tgz,
This step is working...transfert can be done
disconnect Archos from PC properly (umount, safely remove device etc.) and press power button (2)
at this point the device saying that there is an invalid file
Try it with advanced install
Choose the recommended values (on the top) but also select that you want to format the partitions and create new ones
Lenn said:
Try it with advanced install
Choose the recommended values (on the top) but also select that you want to format the partitions and create new ones
Click to expand...
Click to collapse
Hmmm tried that already many times , i will give that another try and let you now
paterdamiaan said:
Hmmm tried that already many times , i will give that another try and let you now
Click to expand...
Click to collapse
lenn, did the advanced install , on SD , 512 rootfs ,and 1.5 g for data
Format of all partitions went ok , the transfer of the 140,3 meg file to install ok until the step to press power button once to start the install ..again the invalid file error message
just thinking could it be something with the sd card ?
paterdamiaan said:
lenn, did the advanced install , on SD , 512 rootfs ,and 1.5 g for data
Format of all partitions went ok , the transfer of the 140,3 meg file to install ok until the step to press power button once to start the install ..again the invalid file error message
just thinking could it be something with the sd card ?
Click to expand...
Click to collapse
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)[/QUO
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
paterdamiaan said:
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)[/QUO
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
Lenn, I have choosen for an install on internal memory , now it is working !!!!!!!!!!!!
where can I find the Urukdroid 1.5 ?
Click to expand...
Click to collapse
paterdamiaan said:
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)
Click to expand...
Click to collapse
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
Maybe the sd card is to big for urukdroid... and the sd card have to be formatted to fat32 ad have to be clear..
Normally urukdroid installs on external sd card
You can in the advanced install method
Hello,
I have instaled the last oxygen in my phone now. After reboot the smartphone display only show a blue screen. In the phone I don't have the system folders and the recovery.img, etc...
Please help me...
Regards
portugaldroid said:
Hello,
I have instaled the last oxygen in my phone now. After reboot the smartphone display only show a blue screen. In the phone I don't have the system folders and the recovery.img, etc...
Please help me...
Regards
Click to expand...
Click to collapse
Don't worry, it happens...If you still can boot in bootloader mode(pink screen), just copy the following attached files in "image" folder:
EMMCBOOT - http://www.mediafire.com/?lb6ifvgk72iru4a
AMSS.MBN - http://www.mediafire.com/?d6r45q6p5gew59v
Recovery.img - http://www.mediafire.com/?57njygc8oianjac
Boot.img - http://www.mediafire.com/?6d5i0714a7o9z97
After copying the files, try booting into recovery and install the Rom again.
Let me know how this goes...
The cust_image folder not exist. My phone don't have some folders...
I have created the folder and extracted the files into the folder but 0 results...
Regards
Sorry my bad english
Ok, let's start over.
Power off the phone, hold Vol+, Vol- and Power until the screen becomes pink. Plug the USB cable and browse the removable drive that just mounted. If it's empty, just create a folder called "image", inside this image folder, copy the 4 files I've uploaded and create another folder called "cust_data", which will be empty.
Now, take the battery out and put it back in. Hold Vol+ and Power and tell me if Recovery Mod boots properly.
Problem solved. CWM ok but oxygen don't works.
Void running now!
Great thanks
Is not may problem but it's very important. I bookmarked this thread.
Sorry ,Mr admin
I know where to reply
please delete this thread
Thanks , won't do this again
Sorry, I could not find where to reply.
So I make this thread.
It's easy to solve your problem.
Space is not enough to flash any ROMs;
Bootloader is locked,you could not edit that sector.
So is there a special ROM that is very small and allows to edit the bootloader?
Here is the MINI ROM: (thread is from anzhi,only copy the download url.)
115,com/file/clyzgmw1
(replace " , " by ". ")
Click the "电信下载“ right besides the red link"VIP ...."
Flash it than edit the bootloader~
NOTICE: I format the whole sector ,and the file including IMEI was missing
'Cause I don't know how to edit recovery or other system files like .mbn,
so just delete the abnormal big file and you would be able to flash any ROM s
Sorry I know where to reply
Sorry ,Mr admin
I know where to reply
please delete this thread
Thanks , won't do this again