This is my version 11 kernel specifically build only for Bootloader 1.2. Just for you information. Bootloader 1.2 allows us to flash adam ROMS etc...This should also work for zpad. So if you updated to 1.2 bootloader and would want to go back to your old rom (Vegan, TNT, Clemsyn+Caulkin combo) all you have to do is flash the ROM and then flash the kernel and you should be good to go. Here is the link.
FROYO VERSION
https://rapidshare.com/files/939609138/1.5Froyoupdated1.2.zip
Gingerbread Version
https://rapidshare.com/files/1670575864/1.5boot1.2Gingerupdated.zip
Honeycomb Version
https://rapidshare.com/files/596821934/1.5boot1.2HoneyComb.zip
BTW, I only tested this in my Clemsyn+Caulkin Combo, but should also work for Vegan and TNT.
Updated Froyo version (AGAIN
Updated link for the Froyo version...
Clemsyn,
I appreciate all you and Roebeet's work on bringing HC to the gTab. I installed BOS a2.3 Saturday and your version 11 kernel Sunday. This morning I install BOS a2.4 and reinstalled your version 11 kernel. Each time I look at the Kernel Version it says 2.6.32.9-clemsyn-g568f750-dirty. Am I doing something wrong or have you been too busy to update the version number?
Regards,
Daris
darisb said:
Clemsyn,
I appreciate all you and Roebeet's work on bringing HC to the gTab. I installed BOS a2.3 Saturday and your version 11 kernel Sunday. This morning I install BOS a2.4 and reinstalled your version 11 kernel. Each time I look at the Kernel Version it says 2.6.32.9-clemsyn-g568f750-dirty. Am I doing something wrong or have you been too busy to update the version number?
Regards,
Daris
Click to expand...
Click to collapse
That is right, but if you use BOS a2.4, there is no need to flash my kernel since it is already in the ROM
Good to know. Thanks! I am looking foward to future updates.
overclocking
can the hc kernel be overclocked and if so how? set CPU will only clock to 1000.
Bluetooth is broken
clemsyn said:
This is my version 11 kernel specifically build only for Bootloader 1.2. Just for you information. Bootloader 1.2 allows us to flash adam ROMS etc...This should also work for zpad. So if you updated to 1.2 bootloader and would want to go back to your old rom (Vegan, TNT, Clemsyn+Caulkin combo) all you have to do is flash the ROM and then flash the kernel and you should be good to go. Here is the link.
FROYO VERSION
https://rapidshare.com/files/939609138/1.5Froyoupdated1.2.zip
Gingerbread Version
https://rapidshare.com/files/1670575864/1.5boot1.2Gingerupdated.zip
Honeycomb Version
https://rapidshare.com/files/596821934/1.5boot1.2HoneyComb.zip
BTW, I only tested this in my Clemsyn+Caulkin Combo, but should also work for Vegan and TNT.
Updated Froyo version (AGAIN
Click to expand...
Click to collapse
can you explain how to update this boot loader?
can i use cwm ?
xkwwwx said:
can the hc kernel be overclocked and if so how? set CPU will only clock to 1000.
Click to expand...
Click to collapse
CPU master is the only app that allows me to activate the OC kernel.
clemsyn said:
This is my version 11 kernel specifically build only for Bootloader 1.2. Just for you information. Bootloader 1.2 allows us to flash adam ROMS etc...This should also work for zpad. So if you updated to 1.2 bootloader and would want to go back to your old rom (Vegan, TNT, Clemsyn+Caulkin combo) all you have to do is flash the ROM and then flash the kernel and you should be good to go. Here is the link.
FROYO VERSION
https://rapidshare.com/files/939609138/1.5Froyoupdated1.2.zip
Gingerbread Version
https://rapidshare.com/files/1670575864/1.5boot1.2Gingerupdated.zip
Honeycomb Version
https://rapidshare.com/files/596821934/1.5boot1.2HoneyComb.zip
BTW, I only tested this in my Clemsyn+Caulkin Combo, but should also work for Vegan and TNT.
Updated Froyo version (AGAIN
Click to expand...
Click to collapse
Using bottleofsmoke with your kernel now, great job.
forum search is down.
May I know where to get rndis_host modules for the kernel, want to use usb tethering.
I'm wondering what for this 1.2 Ginger kernel for since I cannot find any Ginger ROM using 1.2 boot loader. Anybody can make use of this clemsyn kernel for Ginger?
dony71 said:
I'm wondering what for this 1.2 Ginger kernel for since I cannot find any Ginger ROM using 1.2 boot loader. Anybody can make use of this clemsyn kernel for Ginger?
Click to expand...
Click to collapse
its postulated that you can restore a backup of a 1.1 ROM while using the 1.2 BL and then flash the 1.2 kernel in order to get the ROM working. This needs to be tested.
I got stuck myself running the CM7 2.3.4 nightlies.
Oozura said:
its postulated that you can restore a backup of a 1.1 ROM while using the 1.2 BL and then flash the 1.2 kernel in order to get the ROM working. This needs to be tested.
I got stuck myself running the CM7 2.3.4 nightlies.
Click to expand...
Click to collapse
That is the right process in which you can restore run 1.1 ROM, and then flash it with Clemsyn's or Pershoot's NEWBL kernel.
rob_z11 said:
That is the right process in which you can restore run 1.1 ROM, and then flash it with Clemsyn's or Pershoot's NEWBL kernel.
Click to expand...
Click to collapse
No go for me
I have BL 1.2 which I got earlier by flashing stock 4349 and update to HC BoS
HC BoS has already CWM 3.028
I cannot update any 1.1 Ginger ROM (Tried Vegan, Vanilla, Harmony) using CWM 3.028
The error message :
assert failed: getprop("ro.product.device") == "harmony" || getprop("ro.build.product") == "harmony" ||
getprop("ro.build.product") == "harmony"
E:Error in /sdcard/download/G_Harmony_Gingerbreadv2.4.zip
(Status 7)
Installation aborted
i just turned on my new g-tabler for the first time. it wants to update from 3551 to 3991, would that put me on 1.2 ? or doeso only the 4xxx update move to 1.2?
Also, i read 1.2 is locked and does not allow custom kernels, this seems to be a custom kernel for 1.2, so was that info proven wrong? the thread is locked so i cant ask there
i am looking for stability and full hw accel (and something actively developed) can someone suggest a rom?
I do part-time android developer, you can see my apps/projects in my sig, I may see how I can contribute to the g-tablet now that I have one
thanks!
bandroidx said:
i just turned on my new g-tabler for the first time. it wants to update from 3551 to 3991, would that put me on 1.2 ? or doeso only the 4xxx update move to 1.2?
Also, i read 1.2 is locked and does not allow custom kernels, this seems to be a custom kernel for 1.2, so was that info proven wrong? the thread is locked so i cant ask there
i am looking for stability and full hw accel (and something actively developed) can someone suggest a rom?
I do part-time android developer, you can see my apps/projects in my sig, I may see how I can contribute to the g-tablet now that I have one
thanks!
Click to expand...
Click to collapse
I think 3991 using 1.2 boot loader
To make easier update, see roebet honeycomb thread
You will find everything there for upgrading to 1.2 BL
I suggest to use 1.2 based ROM since more upcoming ROM such as honeycomb will use 1.2 BL
Lot of people say calkulin+clemsyn combo 6 is fast stable ROM
Btw, if you know some android! programming, maybe you can
work on Bluetooth DUN dial up client application.
Gtab only has wifi, meaning when travelling and can't get wifi, it's cripple
There is solution already with android phone to have wifi tethering.
But for people don't have android phone, Bluetooth dun tethering will be better
choice since most of smartphone have Bluetooth DUN capability.
I think this what lot of people missing now in gtab.
I have study a bit and find out in fact android git already implement Bluetooth dun
functionality. However missing DUN dialer application.
Only Archos makes their own DUN shipped with Archos 70 series
Clem is it possible to get a 1.6 oc version of this for 1.2 honeycomb? I had my tab up to 1.6 on 3.1.4 enhancement and was stable and flying. Like to push it as far as I can.
The link to the rapidshare download for Gingerbread doesn't seem to be working. Is there an alternative place to pick it up?
gkitab said:
Clem is it possible to get a 1.6 oc version of this for 1.2 honeycomb? I had my tab up to 1.6 on 3.1.4 enhancement and was stable and flying. Like to push it as far as I can.
Click to expand...
Click to collapse
I am also having issue dloading keeps dloading a html file both from here and SlateDroid. Tried skyfire as well, no good. Would really like to see a 1.6 one.
Hey Clemsyn,
Now that rayman has a mostly working 2.6.36 kernel for Adam and they are close to having useful honeycomb roms that run on it, including full hardware acceleration, is there any hope that you'll get in to his git and make a gtab kernel out of it?
I did try booting a boot.img that rayman gave me, and then also the ic1.zip which is a full test rom, but nothing gets past the Viewsonic birds. He has some ideas, and knows changes need to be made for Gtab. It would be great if you could get involved.
MC
So I have 2 iconias. One running stock + honeyvillian kernel, and one that I installed tabooney 3.2 with the 3.2 honeyvillian kernel. On the second, I decided that I didn't want to run 3.2 until the official came out for the a500 (not the 501)
So, I reinstalled stock 3.1 acer rom + stock kernel after doing full wipes. Ran the tab and decided to run the honeyvillian 3.1 kernel on top for OC in the system. I installed it and everything on my tab is backwards. I did a full wipe again, reinstalled the origanal kernel and worked fine. Reinstalled the oc kernel and then everything on the screen was fragged. Back to stock 3.1 kernel.
What gives and how can I fix this irritation? This is my wifes tab and she is not happy lol. Please exuse the noobness of this inquiry and all my spelling errors.
Thanks Guys
The problem lies within user not properly reading the info before proceeding... Considered yourself lucky that you didn't permanently damaged the device
here's the quote from RichardTrip Villain kernel thread:
"As of 3.0 this is only for Honeycomb 3.2"
If you're running HC 3.1 or 3.0.1 ... your kernel version have to be versions below 3.0 !
Yes, I understand that. I should clarify... using version 2.5 for HC 3.1. I looked well over the villian kernel which is why I am confused about my issues. I followed the procedure for the donwgrade on the rom and the kernel and am confused why I can't move to "v2.5" of the honeyvillian kernel without issues. Am I just trying the wrong kernel? I can use the wrong kernel all day and switch back to the stock kernel with no issue just cant move back to a 3.1 custom kernel without issue. I can run the 3.2 a501 rom + honey villian kernel with no issue and re downgrade to 3.1 w/stock kernel no issue but can't seem to get a 3.1 custom to work.
Moved to Q&A
aNY new help?
bump to top
Hello All,
What is advantages of ICS 4.03 from HC 3.2 ?
Did i find stable rom with ICS fully worked with all hardware of Acer A500 and have 3G USB support?
Thanks in advance.
I'm still playing with my new device, but I can say that I've noticed a significant difference in performance between stock (non-ICS) and one of the many ICS variants (Icylicious). It's a really good change, despite my not being able to fix my screen scrolling issue.
I can't say for certain anything about 3G via USB, since I don't have a 3G USB adapter.
Turhan75 said:
Hello All,
What is advantages of ICS 4.03 from HC 3.2 ?
Did i find stable rom with ICS fully worked with all hardware of Acer A500 and have 3G USB support?
Thanks in advance.
Click to expand...
Click to collapse
Personally, I prefer to stick with my 3.2.1 until Acer releases an official rom, and not a Beta release. Too many small issues to deal with. Not to mention who knows what will happen with the bootloaders in the future releases.
Hello,
Acer A500, running latest FlexReaper (R12).
I would like to change the voltage of the processor
(specially when screen is off, and wifi is off : I switch off the wifi when tablet is sleeping)
with Voltage control and SetCpu it seem that I can't
is it a kernel limitation ?
I don't find other kernel easy to install, without changing the rom
any help would be great
Olivier
Hey orobin. It's a limitation of the kernel right now. You can't overclock or underclock flexreaper right now. Currently there are no kernels available to do this unless you try Thor's ICS rom which can be found on tegraowners. No overclockable ICS roms on XDA though.
I've just flashed the Official ICS Room and made the root my self ! I prefere the Stock room's, but when i'm tring to flash the Pershoot Kermel, with overclock, i can't get the wi-fi working, anyone can tell me why ? I know that pershoot kermel is made for the CM Room, but dont work in any other? If dont can you tell me a Kernel with oc that work in my rooted stock rom ?
Other question, is it possible to flash a 7510 Rom in a 7500 tablet ? i got the 3g version but i never use the 3g, and i've want to try the Task Room, everybody says it the best one and i'm curious.
Ps: Sorry for the bad english
Pershoots kernel does not support the official ICS ROM. He said he might do a one time release of his kernel for the official ROM..
Bummer
Perhaps I'll get my hands on it so WiFi will work,won't promise though...
rueloparente said:
I've just flashed the Official ICS Room and made the root my self ! I prefere the Stock room's, but when i'm tring to flash the Pershoot Kermel, with overclock, i can't get the wi-fi working, anyone can tell me why ? I know that pershoot kermel is made for the CM Room, but dont work in any other? If dont can you tell me a Kernel with oc that work in my rooted stock rom ?
Other question, is it possible to flash a 7510 Rom in a 7500 tablet ? i got the 3g version but i never use the 3g, and i've want to try the Task Room, everybody says it the best one and i'm curious.
Ps: Sorry for the bad english
Click to expand...
Click to collapse
Check the Dev section - The A1 kernel is designed for stock ICS. The XE version I believe is OC'd to 1.4 GHz if I'm not mistaken.
I don't have a 3G tablet to be able to say for sure but I believe lots of ROM threads have info where people have asked this question. Research the Task ICS thread for details but I believe you'll be fine - short of losing 3G of course
The A1 kernel did nothing to fix the issue on my device(flickering screen still...),I don't say it's useless though...