Related
A couple weeks ago I got a new myTouch 3g with 3.5mm jack from T-Mobile. I had a lot of issues with it, including it spontaneously unmounting from my computer when trying to copy files to it, the speaker suddenly ceasing to work, vibrate seemingly turning itself off at it's leisure. Pretty annoying, so, I exchanged it. I'm having the same issues. I'm irritated. It doesn't have the gorgeous hardware spec to make it worth the trouble I'm having. I've tried different cords, different micro SD cards (including class 6) and haven't stopped having these issues. So, I'm going to exchange the phone and get an HD2.
I've read up on all the forums about it, and I understand that WM is not the most intuitive/trouble free mobile OS out of the box, but I'm confident that I can tweak it enough to my liking and be happy with it. The HD2's magic hardware makes me think it'll be worth it.
I've tried all the phone platforms except WM up to this point, including Android, iPhone (all gens), blackberry OS, and WebOS.
My favorite is WebOS, but there's no hardware out there yet to make it worth it to use it. I've tried the Pre, and there are too many hardware issues, including the dreaded Oreo Twist, plus the battery life was absolutely horrible. It's smaller sister, the Pixi, is too underpowered and the screen is too small. However, the OS itself is a thing of magic. It works great, has tons of polish, is very intuitive (I never knew I needed a gesture area until I had one), and is very open to hacks and tweaks. When someone can put WebOS on the HD2 my mobile life will be complete, that is until the next best thing comes out. Maybe a 5 inch screen?
Anyway, getting back on track. I'm excited that I'll soon be joining all of the wondrous HD2 discussions once I have my almost tablet phone in my hands.
-Ashley
Good luck with your HD2 and welcome to the forums. My HD2 is my 8th WinMo device.... WinMo is the most versatile and customizable mobile os out there, but it does take some learning and tweaking to get it the way you want. After my Athena with a 5inch screen, I got spoiled and used to having a big screen. I had a raphael after that, but that screen was to small after having a 5" screen, so I'm happy to be back on a device with a big screen again. You definitely have trouble going back to a small screen after using devices with nice big screens.
Have fun.
Welcome to our little corner of xda Ashley....congratulations on your excellent taste in cutting-edge mobile electronics, and your uncommon wisdom in actually doing your research before spending your money. Wise choices for both of those
The only heads-up I could offer other than what you'll find (and have found) through careful reading here, is to be prepared for the step from a resistive screen to a capacitive one...that difference will have as much impact in your experience as the size of the screen does. It's not a bad thing, but I might suggest you start now getting used to having your thumb hover about 2mm higher above the screen than you're in the habit of now
Let us know if you run into anything daunting or confusing or just need suggestions.
Thanks everyone! Although I'm pretty sure the myTouch3G actually does use a capacitive touch screen, it's not nearly as responsive as I noticed the demo unit HD2's were.
ashykat said:
Thanks everyone! Although I'm pretty sure the myTouch3G actually does use a capacitive touch screen, it's not nearly as responsive as I noticed the demo unit HD2's were.
Click to expand...
Click to collapse
Correct...The MT3G does have a capacitive touch screen.
The screen on the HD2 is far too responsive IMO and most will agree...there is a program called BSB tweaks that you will want to put on your HD2 that allows your to do a lot of stuff that is not available in the default settings(decreasing the screen sensitivity is one of them).
I as well had a MT3G just before moving to the HD2, and while I still hold a special place in my heart for all of the old devices in my closet (Even my iPhones)...I couldnt see replacing my HD2 with anything that is currently on the market.
Wow, I honestly thought it was still resistive....it's easily the least capacitive-feeling screen I've ever played with lol
Okay probably a stupid question up for discussion, but what does everyone think about upgrading the screen on the DHD. Say I break mine and found a Sensation that is faulty would it be possible to use its screen since it's also 4.3 inch? I'm assuming it wouldn't work as the GPU probably wouldn't be able to support the higher resolution.
Sent from my Desire HD
sensations screen is no match for our just put sensation next to dhd and you'll see
+ as far as i know there is no other phone on the market that has the same connectors for screen and same "inside" of the phone so no upgrading dhd screen only replacing it trust me on this one you don't wanna mess with that **** take it to service shop and get it repaired
The display may be the same size, but everything apart from that is different on the sensation.
Its not possible, but you could try asking at iFIXIT.com for the connector compatibility.
OK cool makes sense. I've just aways wondered cause everything that is essentially a computer I've seen modified and upgraded... except phones. Wish it could happen one day.
Sent from my Desire HD
Can this be done? I am asking this because I am getting sick of messing with all these tablets none of the 7' ones have optical batteries and it is hard to find one that doesn't weigh like a pound with a huge bezel which is the main reason why I was looking at doing this I feel the tablet would really benefit being light weight. My main question is if I found a decent cellphone with a broken screen for cheap would it be difficult to be able to adapt a 16:9 7' LCD panel and capacitive digitizer to the connector? I'd really love to have a small pocketable 7' tablet that has moddable space for some of the cheaply available cellphone batteries or extended batteries etc..
I was close to getting what I wanted with one tablet but it didn't have USB charging.
you can try on openmoko phone,they are coming with full customization opensource phone so you can modify it.
buzz86us said:
Can this be done? I am asking this because I am getting sick of messing with all these tablets none of the 7' ones have optical batteries and it is hard to find one that doesn't weigh like a pound with a huge bezel which is the main reason why I was looking at doing this I feel the tablet would really benefit being light weight. My main question is if I found a decent cellphone with a broken screen for cheap would it be difficult to be able to adapt a 16:9 7' LCD panel and capacitive digitizer to the connector? I'd really love to have a small pocketable 7' tablet that has moddable space for some of the cheaply available cellphone batteries or extended batteries etc..
I was close to getting what I wanted with one tablet but it didn't have USB charging.
Click to expand...
Click to collapse
If I read this correct, you want to be able to remove the tablets battery and/or swap it with a cellphone battery? Would it work? Yes. No. I have a 5in. Galaxy Player that has a non-removable battery but I removed it just to see if I could. If you manage to correctly wire everything together you have to consider how to get it in a pocketable shell. Also phones and tablets have different shaped batteries and those batteries have different amperage/voltage. But hey, if you got expendable cash and a little "know how" by all means go for it.
i was talking modding a phone with a broken screen into a tablet by replacing the screen with a 7' lcd and a capacitive digitizer and designing a shell while maintaining the phones ability to use its own optical batteries. I am just trying to get a feel for whether this would he a viable idea.
But do u think a 7 inch is pocketable? Even if its weightless? Lol, i almost dont put my hd2 in my pockets, its hell of a big.
But as ans for ur doubts its possible. Unless u manage to get a proper display. Batt isnt that much prob. U can make packs with several batts, if u know how to.
Sent from my HTC HD2 using xda premium
Wouldn't one extended battery suffice? and yes a 7' tab is pocketable the main issue that makes these non pocketable is the huge bezels on some of them.
First and foremost you can't wire a different screen or digitizer into the system. The LCD driver is build and configured for that exact display and resolution. A better solution could be to slave a LCD panel using the hdmi and integrate a mouse into the housing to control it.
As for batteries there is a reason they are the way they are. It is easier to integrate it (smaller profile) and it is easier to deal with. You would need a huge battery if you wanted any sort of run time.
giritrobbins said:
First and foremost you can't wire a different screen or digitizer into the system. The LCD driver is build and configured for that exact display and resolution. A better solution could be to slave a LCD panel using the hdmi and integrate a mouse into the housing to control it.
As for batteries there is a reason they are the way they are. It is easier to integrate it (smaller profile) and it is easier to deal with. You would need a huge battery if you wanted any sort of run time.
Click to expand...
Click to collapse
I was going to say, the biggest problem will be the driving hardware for the LCD as almost each lcd has a different one. In order for this to work you would have to find one that works exactly the same way as the screen that you are taking off.
Battery power will also be a problem. The battery for my Captivate is 5.5 Watt Hours which at 3.7-3.8V is 1450-1500mAh. The battery an iPad 2 is 28W which at 3.8V is 7380 mAh. Basically, bigger screen = bigger backlight. Bigger backlight = more power. The most battery two most battery draining items on the phone is the cell receiver and the lcd backlight.
pongkite said:
you can try on openmoko phone,they are coming with full customization opensource phone so you can modify it.
Click to expand...
Click to collapse
Wow. I haven't seen a reference to openmoko in a long time.
Sent from my iPad using Tapatalk
What's wrong with having a bezel around the screen? It is actually useful when you hold the tablet cause your fingers won't touch the screen as you're holding it
Get a Samsung galaxy note!
I agree with this guy ^^^^
I had the same trouble as you, but now I have a Galaxy Note, its only 5.3 inches though not 7, but after moving up from an iPhone it feels huge.
Yes on the Galaxy Note -- have one and am pleased
I have the Galaxy Note and recommend it as well.
Give that, my read is you may find an option of using an andriod phone put a mod on it (an example cyanogenmod) and BOOM phablet
I am digging into this as an option as well (welcome comments). I have been trying to get a device from ebay without luck todate (recommendations welcome).
I also ordered a Window N50 (N5Zero) as another option
let me know if this helps
Unless you really need the phone functionality of an actual phone, wouldn't it be much simpler to buy an existing 7" tablet and then mod it to take removable batteries? Some dremel work, bit of plastic plates for support and some spring contacts and you're good to go.
China makes some very nice android tablets. I've got a 9.7 one that runs ICS and the experience on it is at least as good as my old HTC desire minus the phone and 3G. Supports external 3G dongles but dang they're ugly..
For the record, I have a galaxy note.
Just buy a kindle fire, root it, and install ICS. Or just install a launcher like my GF did. For 200 dollars you will not do any better than it, period.
The kindle fire is pretty impressive in terms of RAM and processor power for the price, and while the screen isn't perfect, I found it hard to justify $700 at the time for the Gnote over her free smartphone and $200 dollar KF.
Even in terms of gaming, emulation, etc, I have yet to find anything running significantly slower than on my Gnote, even though the specs are just a 1ghz dual- core processor and 512 mb RAM. I think the playstation emulater ran ever so slightly slower with a 3D game, that's it.
My girl seems to get around 3-4 days on standby with some moderate gaming and a lot of e-reading, etc. I'm sure you can get a generic micro-usb 'external battery' which will charge your device etc. Personally, I just carry around a micro-usb cable and/or charger. Unless you are taking this hypothetical tablet into the woods I can't see how you wouldn't be able to charge it at least for an hour or two somewhere in this day and age.
One of the reasons that you will not find tablets with removable batteries is that the batteries themselves are massive and make up much a pretty sizeable chunk of the phone. I can't state the specifics, but the point is you can't just 'remove the back and plop in a new battery'. What, were you planning to run four galaxy S2 batteries in series or something? How would that be useful? And do you really think that the result you will get will be superior to something you could buy? Have you ever tried soldering onto PCBs before? Do you have the proper equipment to do so?
+1 to the lower-cost tablets coming out of China, etc. I have heard some good things about them.
Summary: economies of scale have all the answers you need
The Toshiba Thrive has a removable battery. The 10 inch, at any rate.
Sent from my AT100 using Tapatalk 2
Possiblу is replacement of procesor QUALCOMM QSD8250 on HTC HD2 with dual core 1.5GHz procesor similar with mainboard and other components?I mean CPU of another smartphone.Thanks in adviance
I don't even know if its possible, but there would be so many problems caused by doing that that it really wouldn't be worth it.
Sent from my NexusHD2 using xda app-developers app
It's probably not possible.
Too long a response: what I've seen inside the Leo.
I have the remains of 3 disassembled HTC HD2 units in the fight lab (aka storage).
I will warn that these units are never able to be put back together exactly perfect as they were initially. This is because they are assembled like thin layers of stickers stuck on top of each other you need to peel apart. There are layers of copper shielding, plastic, thin metal, etc. all sandwiched together with adhesive. I've taken apart damn near everything I can, (a personality trait and/or symptom of a disorder, a gift and a curse) and I can say that disassembling an iPhone is cake compared to peeling apart HD2s which are a curse.
So, upon peeling it apart, I encountered different CPU cooling techniques on the different units: yellow thermal compound on one, a thick red/orange thermal pad on the second, and a plastic piece stuck with a mystery compound (possibly even glue) on the 3rd. A faster chip will likely be even hotter.
Look into "reballing" when it comes to soldered cpu replacement. The complexities of the physical replacement are significant but the routing of correct functionality from the alien processor are what makes it a much more difficult project, but nothing is impossible.
One would have to have manufacturer schematics of the board, insider details of chips/other components if functionality is to be had even IF the physical removal and replacement of the processor was achieved. The physical install of a faster clocked chip I think we will see done successfully by someone, but the function of the hardware may be forever impossible unless what I believe is closed/unreleased code/info becomes public. If any device were to have it's complete wealth of detailed info released from company insiders/Dark Force Teams/Chinese anons/crafty work, et al, I'd bet it very well would be the Leo. (We can dream).
To be clear, I'm no chip alchemist at all, I'm just sharing what I've seen and been told by some professionals who know at least a little on what I generalize as computer hardware engineering. Having extensively researched (aka wasted too much of my life on) and even managed to discuss with some HP technicians about a tablet CPU upgrade of a soldered Dothan board, I learned that even if the CPU is successfully replaced (& it doesn't explode) it's more than likely the timings of the board may wind up very effed up. Being uncharted territory, there is no way to find out but to try. I appreciate it if I helped or something interesting came from my ramblings, I think clicking thanks helps me or something. Keep fighting and don't take apart your HD2 if you don't have another one handy!
If i change motherboard(cpu,ram and others) and replace them with another motherboard(with cpu,ram and others) but but outside HD2 is unchanged,with same display and buttons!This is a posable?Please tell me?
Drake Sanderson said:
If i change motherboard(cpu,ram and others) and replace them with another motherboard(with cpu,ram and others) but but outside HD2 is unchanged,with same display and buttons!This is a posable?Please tell me?
Click to expand...
Click to collapse
er, replace them with what? a quad core and 4gb from your pc? and why? are you skilled in microsoldering and chip reprogramming?
how much space is inside your phone and what do you really think the chances are of replacing anything?
did you not read the post above yours by ComputerFight. he has seen the inside of an HD2 and lived to tell the tale
i would usually answer 'anything is possible' but i think this one has to be a no
Even if it was possible, i don't understand what would you acomplish with it?
HD2 is legend because of it's wide variety of OSs, roms etc, not because of its hardware.. at least not anymore.
I would rather buy an new phone or used HD2 if i feel like playing around with flashing different operating systems.
If you do even manage to successfully solder and re-wire new hardware onto the HD2, it wouldn't be usable because there are no drivers for them. Someone who have to build hardware drivers from scratch or port them from other phones then every HD2 Rom would have to be re-done to work with the new hardware. I'm no tech expert but I hardware isn't the main problem, it's software. It would be cool if we got tegra 3 and more ram on the HD2 though, that would give the HD2 2-3 more years in a chance to run future roms.
Still another smartphone to make the appearance as being an HTC HD2?Do you think it possible?
Would you recommend a dual core cpu to pull out another smartphone and puts htc hd2 (as htc sensation xl)?
Drake Sanderson said:
Would you recommend a dual core cpu to pull out another smartphone and puts htc hd2 (as htc sensation xl)?
Click to expand...
Click to collapse
Oh my god....
While the M8 looks amazing, I have concerns about the build quality.
I own the last few HTC flagships, so a bit of background.
Desire HD - amazing phone. Absolutely sold me on Android. The wife still uses it.
One X - I rushed out to buy this as the DHD was that good. I had to exchange this phone 4 times due to QC issues - all documented (flex, bleed, dead pixels, etc). The good phone I eventually got now has a bad strip on the digitizer. The bottom row of the keyboard / just above the unlock ring is dead. Out of warranty and unlocked so no chance with HTC. DOA - no new phone for the wife (see above).
One (M7) - amazing phone again, ran out and bought it at launch. It wasn't until I got it home that I noticed a dead pixel and a hair just under the screen. Maddening! Had to return that one as well. Took a month for my carrier to get more back in stock to replace it. In the end, this phone is close to perfect.
One (M8) - ?
Not trying to start any kind of flamewar, but my faith in HTC is waning. Are they the new Microsoft, only release anything good every other?
Just looking for feedback on the build quality on the M8.
Sent from my HTC One using xda app-developers app
I thought HTC has had a pretty good reputation for build quality with the One X being the exception, not the norm for HTC. And that bad pixel on the M7, that's just bad luck that could happen on any phone.
So far, sounds like the build quality on the M8 is really good. I have less concerns about HTC's build quality than I do about some other phone manufactures (I'll avoid the flame war by not mentioning names, haha).
I have two M8's here, one has a screen that is darker and yellower than the other. Not happy, it will be going back tomorrow.
B-Mod said:
I have two M8's here, one has a screen that is darker and yellower than the other. Not happy, it will be going back tomorrow.
Click to expand...
Click to collapse
Had that issue on the m7 as well. A speaker blew (4 out of 5 HTC phones I've owned had blown speakers) so I filed a claim. I think it took 4 or 5 tries before I got an acceptable replacement. It was still darker and yellower than my original tho
Sent from my VS980 4G using XDA Premium 4 mobile app
I've had pretty good luck with my HTC phones. I'm still rocking the launch day m7.
Sent from my HTC One using Tapatalk
That should be called the trolls thread!
Sent from my HTC One using XDA premium
naouris said:
That should be called the trolls thread!
Sent from my HTC One using XDA premium
Click to expand...
Click to collapse
Not sure how you see this as a "Troll thread"? - OP is asking for feedback and if anyone else has or had concerns regarding build quality issues.
----------------
My HTC One (Red) was pretty solid, however I feel any issues that the One may of had were probably Ironed out by the time the red was released into the wild. - Hopefully HTC will come back with a big bang, like Nokia they've been around a long time.. Just wondering now when the Samsung buzz will wear off and people start to choose stylish, good looking, feature orientated devices over a plastic device. (Not flaming Samsung, as I've had an S3 and an N3)
radicalisto said:
Not sure how you see this as a "Troll thread"? - OP is asking for feedback and if anyone else has or had concerns regarding build quality issues.
----------------
My HTC One (Red) was pretty solid, however I feel any issues that the One may of had were probably Ironed out by the time the red was released into the wild. - Hopefully HTC will come back with a big bang, like Nokia they've been around a long time.. Just wondering now when the Samsung buzz will wear off and people start to choose stylish, good looking, feature orientated devices over a plastic device. (Not flaming Samsung, as I've had an S3 and an N3)
Click to expand...
Click to collapse
And everyone knows these types of threads draw out every single device basher which gives a false representation of the actual prevalence of build quality issues.
That said, name just one device that didn't have any.
As for my HTC experience, the One has been a dream... The rest of them all had a lot of issues. If the M8 follows the M7, there won't be any issues. The ONLY complaint I had about my M7 is the camera tint when not in good lighting that came up and got worse the longer I had the phone.
Speakers? Perfect
Gap? None
Display? Perfect
Durability? Incredible.
If you look in my signature, I've had a ton of HTC devices. Among them, there were some really bad ones. The Sensation? Damn thing got so hot that it would reboot if I used the GPS which made it useless for navigating anywhere. MyTouch 4G? Every time I would restart the device, it would lose its internal storage and act like I factory reset it - it was doing that out of the box. PPC-6800? I lost track of the issues between the screen, overheating, freezing, cracked camera - I replaced it through Sprint 5 times before they gave me a Touch Pro in exchange for it. The original Touch? The screen stopped responding. The Hero? The display cracked even though there was no damage to the glass - the whole thing randomly shattered internally one day.
After the Sensation, I vowed never to go HTC again. Then I got the S4 and my roommate got the One. He couldn't get used to the One coming from the S3 so he wanted to trade me, I did it and I never looked back.
If you found issue in all the HTC phones you bought till now, I'm pretty sure you will have some issue with this as well.
I'm seeing a trend, are you not seeing it?
Sent from my Nexus 5 using Tapatalk
kirdroid said:
If you found issue in all the HTC phones you bought till now, I'm pretty sure you will have some issue with this as well.
I'm seeing a trend, are you not seeing it?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
That's my point though - the camera issue with the M7 was likely something HTC couldn't predict until it happened since it was heat specific. Before that, my M7 the first flawless build quality device I have had since the BlackBerry Curve.
You have a Nexus and you're worried about HTC build quality?
Case in point: all mass-produced computers, tablets, and phones have isolated build quality issues. It happens. There's no sense in worrying about what may or may not happen with a device - if I was going on my track record with previous HTC devices, I would have expected to replace my One at least 2 times by now. But that didn't happen.
EtherealRemnant said:
That's my point though - the camera issue with the M7 was likely something HTC couldn't predict until it happened since it was heat specific. Before that, my M7 the first flawless build quality device I have had since the BlackBerry Curve.
You have a Nexus and you're worried about HTC build quality?
Case in point: all mass-produced computers, tablets, and phones have isolated build quality issues. It happens. There's no sense in worrying about what may or may not happen with a device - if I was going on my track record with previous HTC devices, I would have expected to replace my One at least 2 times by now. But that didn't happen.
Click to expand...
Click to collapse
I buy almost all phones and sell my old ones.. So I never cared about build quality since I don't keep phones for long. The point I'm trying to make is every phone will have something, even if they make a perfect phone some user will nitpick some thing.
Sent from my Nexus 5 using Tapatalk
PatsFan1286 said:
While the M8 looks amazing, I have concerns about the build quality.
I own the last few HTC flagships, so a bit of background.
Desire HD - amazing phone. Absolutely sold me on Android. The wife still uses it.
One X - I rushed out to buy this as the DHD was that good. I had to exchange this phone 4 times due to QC issues - all documented (flex, bleed, dead pixels, etc). The good phone I eventually got now has a bad strip on the digitizer. The bottom row of the keyboard / just above the unlock ring is dead. Out of warranty and unlocked so no chance with HTC. DOA - no new phone for the wife (see above).
One (M7) - amazing phone again, ran out and bought it at launch. It wasn't until I got it home that I noticed a dead pixel and a hair just under the screen. Maddening! Had to return that one as well. Took a month for my carrier to get more back in stock to replace it. In the end, this phone is close to perfect.
One (M8) - ?
Not trying to start any kind of flamewar, but my faith in HTC is waning. Are they the new Microsoft, only release anything good every other?
Just looking for feedback on the build quality on the M8.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I kinda feel your pain...
1. One X, Launch day, before the embargo... Still have it. No issues at all.
2. One (m7), Launch day... Glass was crooked. MEaning it dipped in at the bottom and stuck out at the top. Took it back got another, dead pixel... Finally got a third that was decent.
3. One Max (m6) - Used... Perfect, no complaints.
3. One M8 - Perfect. No complaints...
We all know the One (m7) had some issues... It was luck of the draw.
I have no hesitations except screen size. Coming from N3 and One Max... Its hard to go back to 5"
And fwiw sometimes these threads cause people to look at their device so closely and see they have the same thing and then it bothers them. Had they never come across a thread like this they probably wouldn't have noticed (the small imperfections not big defects)
Sent from my HTC One using Tapatalk
I know this type of thread will always bring out trolls / fanboys of other manufacturers, but that's not my intention.
I don't think I'm being too picky when I shell out 600 bucks for a phone and expect it to be nearly perfect. I understand there are always flaws in any mass produced electronic device, but to me a dead pixel is unacceptable - once you see it, it can't be unseen. My phone has the purple tint issue with the camera, but I don't care about that. Some may say I'm being nitpicky about a pixel, but I could say the same about others who complain about the camera. To each their own I guess.
kirdroid said:
If you found issue in all the HTC phones you bought till now, I'm pretty sure you will have some issue with this as well.
I'm seeing a trend, are you not seeing it?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I'm not exactly sure what your point is. Yes, I'm seeing a trend, hence me creating this thread to see if others are experiencing issues with the M8. So I'm expected to just suck it up and deal with it if I'm not happy? I continue to buy HTC as I like the design, non-OLED screen, Sense and the community here on XDA.
I really am just looking for others experience with the build quality of the M8.
scrosler said:
I kinda feel your pain...
1. One X, Launch day, before the embargo... Still have it. No issues at all.
2. One (m7), Launch day... Glass was crooked. MEaning it dipped in at the bottom and stuck out at the top. Took it back got another, dead pixel... Finally got a third that was decent.
3. One Max (m6) - Used... Perfect, no complaints.
3. One M8 - Perfect. No complaints...
We all know the One (m7) had some issues... It was luck of the draw.
I have no hesitations except screen size. Coming from N3 and One Max... Its hard to go back to 5"
Click to expand...
Click to collapse
I'm actually struggling a little with the phone being to big haha. Its pretty cool though. No actual real complaints yet.
I've had a new htc every year for the past 10 or so.
I have not had to return one of them.
The last time I had to bring a HTC phone back was in the touch pro 2 days lol. I guess I'm lucky
Sent from my HTC One using Tapatalk
I have a HTC One X and I haven't had any issues with it except for band compatibility. Also, the M8 looks nice but I wonder will the metal on it scratch easily?
Sent from my One X using xda app-developers app
I bought the M8 from Verizon yesterday and I have zero issues. Screen is gorgeous, no yellowing. There are no gap issues like the M7. Screen is flush with the boom sound speakers. The build quality is outstanding. I had three M7s and each one had issues. One with gaps but a flush screen. One with no gaps but the screen was not flush. And one had gaps and the screen was off.
This phone is easily the highest build quality phone I've ever had. And I have been through many phones.
Sent from my HTC6525LVW using xda app-developers app
I really really can speak out of experience, having owned many HTC devices!
HTC Desire - Fantastic phone, no issues, camera lens was very easy to scratch though and after two years the backplate of the phone became loose.
HTC Desire HD - Fantastic phone, no issues there either. I think my only gripe was the AWFUL side cover for the battery and the bottom plastic part of the phone. If I ran my finger over the bottom of the phone there was a difference in levels between the sim-card cover and the body of the phone. No big issue though, and not really a build quality issue either, more of a design flaw.
HTC Mozart - Terrible phone. Lovely design but the phone got dust underneath the screen after having it for just two months. Luckily it was only a temporary phone though. I smashed my Desire HD and picked up a Mozart new in a sale. I got the Sensation three months later.
HTC Sensation & Sensation XE - This phone had a somewhat strange design. The entire back of the phone would come off and it wrapped around the front slightly. After removing the cover two or three times it didn't fit as snugly as it once did and every time you pressed a capacitive button it would result in the phone creaking against the back of the body of the phone. Hard to explain, once again more of a design flaw.
HTC One X - By far the worst HTC phone, but down to design flaws once again. Wi-Fi antenna was stuck to the body of the phone, not the internal of the phone, Tegra 3 chipset would heat up a LOT resulting in the polycarbonate expanding and you being left with no Wi-Fi signal or a very weak one indeed. In terms of other things, such as dead pixels I never experienced this. All in all I had about 6 HTC One Xs in a short space of time due to the Wi-Fi issue, and the Wi-Fi issue was the only problem I had with them. I switched to a GS3 due to this.
HTC One (M7) - I have had about 10 HTC One's in the past year, I got one on release day though and it had the infamous gap issue. This is somewhat a design issue, once again, but could also be a build quality issue as they shouldn't have been let out of QC like that. Due to the complex design of the phone, the edges are prone to sticking out and being "un-even" with the metal housing on the speakers. At the top and bottom of the phones there is often a hairline gap between the polycarbonate and the speaker frame too. On the sides of the phone, the black plastic strips are prone to being uneven, the volume rocker can become loose sometimes. The white polycarbonate was prone to staining and getting dirty, but this isn't really an issue it's to be expected. It's important to note that though annoying, none of these issues rendered the phone unusable. Maybe just unacceptable in some people preferences (mine, I'm a perfectionist and dropping £479 on a phone is a lot)
I will be getting the M8, and I will be an early adopter. I love HTC phones, they are the best regardless.