Omnia 7 Download Mode... - Omnia 7 General

Just thought i would share my findings. I have been trying to get my T-Mobile UK Omnia 7 into download mode for ages!
The Vol UP, Camera Button, Power button trick did not work.
However i discovered that if you
- Hold the Vol UP button and the Camera Button
- THEN connect the device to your PC via USB
it will power it up and enter the device into Download Mode.
Well i hope that helps some others like it helped me
Regards,
Alan

I still can not update my phone to version 7.0.7392.0
I tried and cant go into download mode
I have to hold vol-up+camera for how long?

Basically what i did was hold the phone in one hand pressing the vol up and camera button. Then simply plugged in my Omnia 7 via USB. It went into download mode all by its self.
I had been trying for months, even just ordered a jig thing off ebay lol
Anyway, i managed to flash the phone down to 7004, then upgrade to 7392. Also make sure you have installed the new drivers off the samsung site (v1.3).
Long story short, i am now happily running Mango, and WOW it's a massive improvement! What ever you do dont Waslh your phone, it causes more issues than good as i found out lol.

That's great news influenceuk. I am also a new T-Mobile Omnia 7 user (great deal @ £15pm), and I had to enter 'download Mode' the hard-way, a little bit of patience and a 300K Ohm resistor from Maplin did the trick. So the method you propose bypasses the USB-Jig antics, that would be awesome.
I'm tempted to flash the blocked bootloader back to confirm your findings.

Yeah chemeng, it worked perfectly for me last night after trying for months!!
I only had to do it cause i walshed my phone, and it was causing issues updating to the mango beta. i will see if i can find the page i found the instructions on

Just looked thought my history, but cant find the exact solution i mention. I did find the XDA Dev guide, which i think i may have mis read... then found my work around.
Some one else should try and see if it works too, hopefully it does.

Sorry but I cant get my phone into dowhload mode with your solution

It seems as if Alan's bootloader was semi-blocked

hey folks thıs worked for me
http://pocketnow.com/windows-phone/samsung-outs-omnia-7-patch-fixes-wp7-update-errors

Well, I used to encounter this problem that cannot access to the download mode and getting error code (8XXXXXXXX) when trying to update the phone via Zune Software. But after trying update via zune few times, I successfully updated my OMNIA 7 to 7392 and got download mode works afterwards.

Same here. Tried to get into Download Mode for hours. I was about to build myself a jig.fortunatley i Tried updating my phone via zune... et voila...zune updated my bootloader and the Rom.
Now im able to get into Download Mode without any problems! I got a Samsung omnia 7 from t-mobile Germany.
Hope this helps...
Greetings

Bootloader version
Is there anyone who has successfully updated their Omnia 7 from NoDo to 7392 (latest security update) or Mango, with a bootloader version of 4.10.1.9, without using a USB jig?
Thanks,
Karthik

I have tried almost everything, but nothing works, I also have Omnia 7 with 7390 and bootloade 4.10.1.9, I think with this version of bootloader there isn't any other option than usb jig. I even called samsung helpline (they were much less informed than me, so they just told me to bring the phone to service center), does anyone have experience with service center, or is it better to make USB jig and do it at home?

I have three Omina 7 ,they are all 16G type.
First one ,by pressing vol up ,camera and power button can reach the download mode.
Unfortunately,the other two must use a jig to get the download mode.

Related

Got a bricked X2, please help.

Ok, so i got fed up with my phone freezing so i thought i would get SEUS to
re install the rom, (mr1, mr2 is not available to me yet).
The indicator got to about an inch along when a message popped up saying
update failed.
Now i cannot enter bootloader to try again, the phone will not turn on, SE refuse
to help saying it is not released in the UK so i am not entitled to support.
I have not yet had a reply from where i got it from.
Is there any way to get this piece of junk going again?
Thanks.
Try to charge your battery on another phone / external charger.
I encountered a similar problem when trying to flash the X2. I received the UPDATED FAILED error, pulled out the battery, Volume Down + Power and gave it another try.
SEUS shouldn't brick your phone, maybe it's a problem with your battery.
The battery is at about 80%, i have tried it in my X1 as it is the same battery.
I tried the X1's battery in the X2 as well.
When i press the volume down and power buttons it vibrates for a fraction of a
second and then just stays on a black screen.
Let's try then a forced bootmode connection.
1. Insert the data cable into the phone without the battery plugged in.
2. Open SEUS and go to the connection screen.
3. While the software is searching for the phone, keep VOL DOWN + POWER and insert the battery.
After the phone vibrates, the software should recognize the X2.
This procedure generally applies to dead phones and sometimes works.
Post the result.
Still nothing, i kept the buttons pressed for about 30 seconds, then vista popped up a message 'usb device not recognised' the phone stayed as it did before and SEUS did nothing.
Sadly the support excuse they are using is what a lot of manufacturers do if you are in an area where they don't support it. This is the downside of buying a device on eBay etc. before it is "officially" released in your area. Contact the point of sale and hopefully they can send it in for you. You might have to pay shipping costs.
Leave your battery out and unplugged for an hour and then try again after that to revive it.
I did not even realise it had not been released in the UK, i got it from a UK website.
I am still waiting for them to get back to me, as it is Sunday they won't be getting back to me till Mon Tue i would think.
SE were fast though, less than an hour to reply, about the only credit they get though.
I have had the battery out for more than an hour a few times so that does not work.
Thanks for the suggestions though, keep em coming if there are any more.
WINE GLASS said:
Ok, so i got fed up with my phone freezing so i thought i would get SEUS to
re install the rom, (mr1, mr2 is not available to me yet).
The indicator got to about an inch along when a message popped up saying
update failed.
Now i cannot enter bootloader to try again, the phone will not turn on...
Click to expand...
Click to collapse
The exact same thing happened to me today, but I did not even get the update failed message (but I got the inch )
The phone is now bricked. No bootloader no nothing.
I guess you guys have the Singapore English versions? A lot of those retailers in the UK were getting them through Malaysia and so on. Then selling in the UK but not informing buyers that SE wont support it in the UK yet. It's really sad
It's a French X2, and I got it in France. I think I will have no issue with getting my X2 unbricked (or replaced), SE support is pretty good over here.
But if in the mean time someone has an idea or a trick on how to unbrick a X2 (other than the tips already listed in this thread), I would be happy to test it
HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!
-kOS- said:
HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!
Click to expand...
Click to collapse
Wrong phone, wrong forum, wrong idea.
-kOS- said:
HI!!
I have a T3238+ with a K3 Proccessor, I flash it with a wrong ROM, when I try to reflash again the K3Aid tool display the following error message : "Read FTM State Error" after i click the download mode button, Anyone can help me??? thank you!!!
Click to expand...
Click to collapse
Learn to "Read" and use the "Search" function newb.
Hi!
This has happened to me also. The solution was to connect the original charger (I usually charge from the USB port on my PC).
Try this:
1. Disconnect all cables from phone.
2. Remove battery.
3. Insert battery.
4. Connect original SE charger and charge for 5 minutes.
5. With the charger still connected, press volume down and then power on simultaneously - hold until SE logo appears.
If not working, repeat from step 1 several times (i tried 3 times before it finally worked).
6. Connect PC USB and run SEUS update.
Seems to me like the phone does not always charg from USB, and that when it enters the "black-screen-after-short-vibration-after-power-on"-mode it does not charge while in this mode.
Mod edit: not rom dev related, moved to general
well... when it say update fail but if save the new rom to ur phone then its fine, take the battery out and restart ur phone.. it should load the new OS.. my one says fail everytime.. so no problem for me

[Q] SGS Problem That Nobody Can Fix?

The main Samsung Approved Service Center here in Kenya has just given up on my SGS 1900 UK Model Nov 2010, originally 2.1 firmware upgrade via KIES to Froyo 2.21 in March 2011. They have handed it back unfixed after a week. Cant find a problem like this on any forum/google. Can find one that is fixable with the resistor jig, but Samsung dealer says his jigs don't help:
1) Press power, on comes B&W Samsung GT I900 screen, then the mosaic graphic that resolves to the glowing big "S". Then it buzzes feebly. Eventually it goes black but keeps buzzing now and then. Power off works.
If you poke around trying to get it into 3 touch reset, the Menu and Back keys light up and stay lit.
2) 3 Touch reset will not work. Dunno if it ever did as never tried before.
3) Plug into USB charger, it charges fine and shows the charger icon.
4) Plug into KIES and after a lot of attempts, KIES identifies it + firmware and connects. I can see and save my contacts and it displays CONTACTS, INTERNAL SD and CALENDAR folders in KIES. No more
5) ODIN ( which I dunno how 2 use but have) sees the SGS's COM when I plug it to my comp.
6) The dealer claims to have tried to resart/reflash with Samsung jigs. He has handed it back with a "cant fix".
What the heck is going on here? Looks like I have lost a few hundred bucks and have to throw it away.
When did this start? Phone was working perfectly. Suddenly a solid red icon with large white star labelled "Web Page" appeared on home page but no such App was found in SETTINGS>ETC. In any case, "Web Page" just led me to a totally innocuous page I use all the time as a homepage on INTERNET app. A few starts and shutdowns after that ( the battery was getting low so swx'd on and off like 3 times over an hour), it just went into (1) above.
Phone is STOCK, no mods, no reflashes,no rooting etc
Thanks
Peter in Darkest Africa
if odin can 'see' you handset, have you tried flashing the ROM again? find a stock froyo rom from one of the threads here in the general section (click here) or download from samfirmware.com .
Once you have the rom files, kill all the KIES tasks using the task-manager in windows. Get your phone into download mode by pressing volume down+menu button+power button until you get the yellow screen showing the android working. then open odin 1.7 and connect your handset. once odin connects, click on the buttons for PDA,PHONE and CSC in odin and browse to the appropraite file which you've download in the rom. also click on the PIT button, browse to the odin folder and select the 512.pit file. Once this is done, check the main odin window to make sure the check-box next to 're-partition' is checked. click start and it should flash the new firmware for you.
Disclaimer: I do not take responsibility for any harm that may come to your phone during the flashing process. The instuctions above are accurate but are to be performed at your own risk.
flash Darky Rom 10.1 with JVO Modem . Best GPS i´ve ever had, and my GPS was really bad.
frostygenius said:
if odin can 'see' you handset, have you tried flashing the ROM again? find a stock froyo rom from one of the threads here in the general section (click here) or download from samfirmware.com .
Once you have the rom files, kill all the KIES tasks using the task-manager in windows. then open odin and connect your handset. once odin connects, click on the buttons for PDA,PHONE and CSC in odin and browse to the appropraite file which you've download in the rom. also click on the PIT button, browse to the odin folder and select the 512.pit file. Once this is done, check the main odin window to make sure the check-box next to 're-partition' is checked. click start and it should flash the new firmware for you.
Disclaimer: I do not take responsibility for any harm that may come to your phone during the flashing process. The instuctions above are accurate but are to be performed at your own risk.
Click to expand...
Click to collapse
@frostygenius
I don´t think that your instrunctions ARE accuarate. You don´t even mention that he has to be in Download mode if he wants to use Odin. Also you advise to connect phone right after opening Odin and than insert the files, but some versions of Odin are known that they malfunctioning if you do this in this order, You should first insert files and set odin and after that plug in your phone.
And if he claims that he is on stock since bought the phone, so maybe he never used it before.
@peterg123
I´m not exactly following what happens to your phone. If I understand correctly the Samsung released defective ROM via KIES and after a week turn it down? But you already updated and now your phone is broken? If yes, I think that Samsung service center should repair your phone or if its serious damage than even replace it.
Is the phone able to boot-up and work properly? Is your recovery mode and/or download mode working? If the download mode (use 3-button combo - VolDown+Home+Power) is working then you can try recover on your own, but be careful, dont do anything before you are sure that you know what you are doing. You can go through this post before start [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!].
Also go through the forum or samfirmware.com and find your official version of rom (Eclair 2.1) to be sure that you can anytime revert to this one because of warranty.
EDIT: Also can you please post some photos or video showing what happens to your phone?
Ok, I dunno if this is gonna help but I had a very similar issue when I first got my phone, within a week of owning it.
Points 1-3, exactly what happened mine.
Points 4 & 5 I didn't try, (was fairly new to Android)
Left it in to my local Vodafone shop & within 5 days I had it back in perfect working order, the maintenance report stated faulty hardware, the display module had to be replaced. Maybe worth mentioning to the service guy?
R34L2Pac said:
@frostygenius
I don´t think that your instrunctions ARE accuarate. You don´t even mention that he has to be in Download mode if he wants to use Odin. Also you advise to connect phone right after opening Odin and than insert the files, but some versions of Odin are known that they malfunctioning if you do this in this order, You should first insert files and set odin and after that plug in your phone.
And if he claims that he is on stock since bought the phone, so maybe he never used it before.
@peterg123
I´m not exactly following what happens to your phone. If I understand correctly the Samsung released defective ROM via KIES and after a week turn it down? But you already updated and now your phone is broken? If yes, I think that Samsung service center should repair your phone or if its serious damage than even replace it.
Is the phone able to boot-up and work properly? Is your recovery mode and/or download mode working? If the download mode (use 3-button combo - VolDown+Home+Power) is working then you can try recover on your own, but be careful, dont do anything before you are sure that you know what you are doing. You can go through this post before start [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!].
Also go through the forum or samfirmware.com and find your official version of rom (Eclair 2.1) to be sure that you can anytime revert to this one because of warranty.
EDIT: Also can you please post some photos or video showing what happens to your phone?
Click to expand...
Click to collapse
Thanks for the heads-up I forgot to mention those points. I've updated my original post.
Sent from my GT-I9000 using Tapatalk
Thanks, it is not possible to get into download mode, or I would have done all that. As explained, the phone will not go past the giant "S" logo ( 3rd screen after power on). This problem has happened to many people, worldwide.
As explained the three button default firmware does not work.
The Samsung repair agent claims to have used the 301k resistor method to restart the phone and even that failed. I am not sure if this is true but he said so.. not sure because everybody reports success with this.
ODIN, as I said ( 1.8) recognises the COM connection just as does KIES. The problem is, I am not in download mode so can't reflash if I tried.
I have used the phone for 10 weeks since firmware upgrade from 2.1 to 2.2 during which I had no problems except the occasional process stopped errors.
Hope this help, thanks for trying for me
Yes you are correct, I can't get download mode. The phone has never been reflashed or messed with. It came with 2.1 and using KIES in March I reflashed to 2.2 and it worked perfectly for 10 weeks until it semi-bricked.
There is the Black Screen of eath...then there is the pulsasing S screen of limbo! That's what I have.
The only harwdare clue I have is the SGS blew the fuse in my car charger shortly before "expiring"...yet if connected to USB or other charger, it charges the battery and displays the logo.
peterg123 said:
Thanks, it is not possible to get into download mode, or I would have done all that. As explained, the phone will not go past the giant "S" logo ( 3rd screen after power on). This problem has happened to many people, worldwide.
As explained the three button default firmware does not work.
The Samsung repair agent claims to have used the 301k resistor method to restart the phone and even that failed. I am not sure if this is true but he said so.. not sure because everybody reports success with this.
ODIN, as I said ( 1.8) recognises the COM connection just as does KIES. The problem is, I am not in download mode so can't reflash if I tried.
I have used the phone for 10 weeks since firmware upgrade from 2.1 to 2.2 during which I had no problems except the occasional process stopped errors.
Hope this help, thanks for trying for me
Click to expand...
Click to collapse
..But download mode doesn't display the S logo or even the first Galaxy S 1900 logo...it goes straight in.
Try looking up in the Development section - I'm sure there is a jig method in there and it might be worth trying yourself, you've not got mush to lose now.
If you can get into download mode eventually, search for and flash Ezbase, that will get you onto a rooted firmware and it works EVERY single time for me. Good luck.
@R34L2Pac
Hi, thanks. As posted, the stock UK model SGS 1900 with 2.1 Eclair worked perfect from Nov to March 2011, was firmware upodated by KIES in March 2011 to 2.2.1 Froyo and worked like a dream until it went "semi-bricked" with the "Logo of Limbo" screen ( the pulsating giant S) for no reason.
A week before this, I changed SIMs when I changed countries and for some reason lost all added apps. I had to re-install them and even then, sometimes twice as I got many "android process stopped" errors --- even on some of the Sansung installed ones like Layar. That is the only problem I ever had.
The phone has only had apps from Market and never been modded whatsoever. Many thanks
Hi,
You said that you can see a pulsating S logo, sound to me like your phone is bootlooping. But you didnt mention if you can get at least to recovery(VolUp+Home+Power)? If you can get into recovery, you could try just factory reset your phone from recovery and reboot your system.
Also in the development forum you can find some kernels which can be flashed via recovery (like speedmod K13 for Froyo), so you can try to flash this kernel and after reboot into CWM recovery you could try to connect phone to ADB and type the command "adb reboot download".
I read on the forum that the home-made jig method worked for everyone, so looks like the samsung technician was doing something wrong. It is worth trying to made one a see what it does. Also found this thread, where user cuperus claims that even with charger can be simulated the jig by heating-up your device. So you can also try it, just plug your phone to a charger, let it charge for 1hour and than try use 3-button combo to go to download mode.
R34L2Pac said:
Hi,
You said that you can see a pulsating S logo, sound to me like your phone is bootlooping. But you didnt mention if you can get at least to recovery(VolUp+Home+Power)? If you can get into recovery, you could try just factory reset your phone from recovery and reboot your system.
Also in the development forum you can find some kernels which can be flashed via recovery (like speedmod K13 for Froyo), so you can try to flash this kernel and after reboot into CWM recovery you could try to connect phone to ADB and type the command "adb reboot download".
I read on the forum that the home-made jig method worked for everyone, so looks like the samsung technician was doing something wrong. It is worth trying to made one a see what it does. Also found this thread, where user cuperus claims that even with charger can be simulated the jig by heating-up your device. So you can also try it, just plug your phone to a charger, let it charge for 1hour and than try use 3-button combo to go to download mode.
Click to expand...
Click to collapse
Sorry I should have mentioned that it will not get into 3 button recovery mode, that has zero effect or rather, just sends it to the "Logo of Limbo" ( pulsating "S") just as does the power button.
Will maybe try a long charge time and see if that helps! Many thanks
Try en carefully learn hw to use odin coz I gt tha same exact model. I hav flashed mine many tyms en am on 2.3.4 XXJVP. if u do gt into download mode odin will sort u. Regards frm K.poly.
Sent from my GT-I9000 using XDA Premium App
peterg123 said:
Sorry I should have mentioned that it will not get into 3 button recovery mode, that has zero effect or rather, just sends it to the "Logo of Limbo" ( pulsating "S") just as does the power button.
Will maybe try a long charge time and see if that helps! Many thanks
Click to expand...
Click to collapse
how long have you tried holding down the 'volume down+menu+power' keys? a simple quick press of the three buttons does not work. you have to keep holding them all down for a bit (sometimes upto to 15-20 seconds) for it to go into download mode.
Sorry for the fast answer but I'm at work atm... I think he needs to do the 3 combo button fix on his phone first. I know it's on the forum somewhere... Can anyone check it for him? I lost the 3 combo the first time I updated with Keys from 2.1 to 2.2 and I had to fix it using a program that I can't remember to go on download mode and apply that fix.
Then he can use Odin to flash a stock rom as he needs, plus having 3 combo fixed!
Good luck mate!
Sent from my GT-I9000 using XDA App
Possible fix for your problem
Hi peterg,
I was looking through the general forum and found this post, where user beamzuk1 describes method how he fixed his semibricked phone. Symptoms are the same (not booting, glowing soft-keys, vibrating, no recovery and no download mode). So he used 'adb reboot recovery', I would say that proper command is 'adb reboot download', but you can try both. Also go through guide HOWTO use ADB, which I posted here the link in earlier post.
Hope this will help.
PS: Try follow beamzuk1 step-by-step, because if you start phone earlier than you connect it to pc, adb might not recognize the phone. Also be sure that you have correctly installed drivers and android-sdk before you try this.
These phones come with a 2 year warranty. Why don't you contact Samsung directly yourself - telling them that the local repair centre wouldn't fix/replace it for you. If you did nothing besides what you described, then I would have thought you were entitled to have it fixed or replaced by Samsung.
LiverpoolFCfan said:
These phones come with a 2 year warranty. Why don't you contact Samsung directly yourself - telling them that the local repair centre wouldn't fix/replace it for you. If you did nothing besides what you described, then I would have thought you were entitled to have it fixed or replaced by Samsung.
Click to expand...
Click to collapse
+1
Also think that Samsung should repair it or replace it.
The fact your repair center has done nothing to fix your phone, in several occasions, now entitles you to brand new replacement or your money refunded in full, contract terminated and expenses paid for your losses incurred as a result of their negligence.
Why not hit them up for the SGS 2.
I had the same issue with my first Galaxy S...wifi stopped working at first, I turned it off then on again but nothing changed. So I rebooted to see if it would correct itself. Bootloops and no 3 button combo (download or recovery)
Sent it off to Samsung through the Carphone Warehouse in the UK. I'd contact a Samsung Service Centre directly if I were you.

How To Flash a Demo LG Quantum?

Heya!
I bought a demo LG Quantum for a song today and I've been trying to remove the Demo software by following these instructions:
Through work aquired a Mozart with Telstra Demo(Store) Rom. Very furstrating as it wouldnt hold settings and kept playing that damn video.....
Downloaded this rom (following the links from here and trying a few download mirrors until I found one that worked)
Turned off Phone
Held Volume Down Key while Pressing Power Button (This turns the phone on and launched Bootloader)
Connected to PC Waited about 5 minutes while Windows auto detected the drivers and installed what it needed
Right Mouse clicked on the downloaded Rom and selected "Run as Administrator"
Followed the prompts.
****NOTE**** When it got to 10% the phone rebooted - LET IT!!!!! DO NOT TOUCH IT DO NOT DISCONNECT IT - Just wait -The computer will redetect and about 10 Min later VIOLA - All sorted nice and clean WP7 HTC Mozart (with a with Telstra One Hub - which aint that bad) - Whacked the 3 Sim card in - Downloaded Connection Setup Wizard from market place and a few minutes later was sending and receiving MMS etc
Click to expand...
Click to collapse
However, I don't know if this applies to the LG Quantum since I can't seem to access the Bootloader screen and the ROM I can't find an executable ROM file like the one he refers to.
Has anyone resolved this problem on their Quantum?
Could you help me through it?
Thanks in advance,
-Aylmer
Nevermind! I was trying to flash it, but, in the LGDP2 Flashing app, I was plugging in the phone before pressing start!
Oups!
If you're still having problems, the other trick is to use the drivers from the LG Mobile Support Tool.
I got mine from eBay for $100...it is a Demo unit. This thread is very helpful and hope to remove the "Device Alive" software and enjoy my nifty windows phone!
As an avid Android and iOS user I look forward to having fun with WP7
voltagex said:
If you're still having problems, the other trick is to use the drivers from the LG Mobile Support Tool.
Click to expand...
Click to collapse
How would that trick work?
Does anyone have the link for the stock rom? I can't seem to be able to download from http://depositfiles.com/en/files/tmh1fz1ed. It always says invalid param. Could anyone post it here or upload it to mediafire or something? Thnx
ok managed to download the LG c900 ROM but installing the LGDP2 gives me the Installshield error , Catastrophic Error. And my LG USB Modem doesn't wanna install
Could you give more detail about the problem?
Also, which version of Windows are you using?

[Q] Bricked phone after failed RTM Mango Update

Hi guys
Just wondering if anyone can point me in the right direction before I send my Samsung Omina 7 in for repair. First a brief history
Updated previously from NoDo to the first mango beta without issue, then again to the refresh beta without a problem. Decided today that I would for RTM.
During update process updatewp kept timing out - I've since read resetting the device before attempting or deleting some of the zip files in the RTM package fixes this.
Instead of searching forums I unplugged the device and reset it when it wouldn't reboot. This left me with a completely unstable OS. It took ages to boot up and most apps wouldn't load.
I tried to restore my NoDo backup from the Zune beta but it didn't work. I uninstalled Zune Beta and drivers and attempted the restore using the current Zune version and again the restore would not work.
Figured I would just reflash the rom instead so I followed the guide below.
http://forum.xda-developers.com/showthread.php?t=973420&highlight=how+to+rom
This also failed - I can get into download mode, and WP7 Downloader looks like it's proceeding correctly but it is my understanding that after the first reboot it should go into the "connect to computer" style mode with the picture of the phone and a computer connected with USB. My phone does not do this - instead it boots to the Samsung Omina screen and just sits there. It seems to quickly reboot every 10 mins or so.
I've attempted the flash a second time and got the same result. Any ideas?
just goto download mode and flash it with another firmware..
If you can't get into download mode, just go to your closest DIY shop, grab 3 100k resistors and make yourself a JIG.
Full instructions here : http://forum.xda-developers.com/showthread.php?t=1092824&highlight=JIG
You should be able to reboot in download mode, and then restore to whatever ROM you want
Just tried that - used a different one but got the same result.
When WP7 Downloader gets to "Plz wait while rebuilding" the phone has rebooted to the samsung omnia 7 screen and not the computer connection screen.
Weird.
If you got to download mode after using the JIG, flash should be flawless.
I'm clueless here, apart from trying again with a different firmware/JIG.
Just and FYI. I couldn't fix it myself so I send it in for repair. They needed to replace the motherboard.

Lost Cause?

Well i've had my i5700 for about two years and recently it's been acting rather strange, being extremely slow etc. But now it won't even boot up. I've been planning on upgrading anyway, i was just wondering if there's anything i could try to maybe save it? It's never been unlocked, still on 1.5 (thanks to complete lack of anything but Windows support by Samsung). Holding down volume down, call and call end just causes it to reboot before it reaches the end of the initial loading bar. I've tried most other combinations i could find, the only one that did anything other than a normal boot was call, ok and call end which put it in a 'self test' sort of thing, which wasn't much help.
Any ideas or should i just give up? Thanks
pm me about it so i can remember to help you tomorrow. i'll tell you how to upgrade to official 2.1. it's faster than 1.5. i can't help you now because i can't turn on my computer.
Sent from my Galaxy Spica using Tapatalk 2 Beta-6
You can get android 2.1 update with Kies I believe, but if your phone is rooted try to upgrade it with FROYO for SPICA (CyanogenMod-6.1.1-Spica-alpha8.3) which you can find it here:
http://forum.xda-developers.com/showthread.php?t=865342
It is not hard to do and I believe it works much better.
I can't use Kies if it won't boot up. And as far as i can see i can't root it without being unlocked and i can't unlock it without being rooted.
I hadn't upgraded it earlier because of the Kies driver requirement, which doesn't work on Linux. I do have access to a Windows laptop currently though...
I tried to use Kies from Download Mode, which i managed to get into a few days ago, but it doesn't do it now. Not sure if i'm doing the wrong combination or what.
If I remember correctly you don´t have to go in Download Mode when you use Kies. Just disable USB debugging. Do not enable it when you use Kies (turn it off). Then open Kies and let Kies search your phone. Then it will give you latest available version for Galaxy Spica i5700 which is android 2.1 and just let it update and reboot. I hope it will go well.
You mean disable USB debugging on the phone? Kind of hard to do when it won't boot up
I did get it to where Kies would recognize the phone, when it was stuck in a sort of loop after the boot animation. But it didn't give me the option to upgrade.
Ou yes, you mentioned the phone won´t boot up. In that case I really don´t know what to do. If I would be on your place and if I would want to keep that phone I would probably bring it to some service and explain the situation. They probably have some software to boot up the phone with I would think. If not, then I really don´t see any other option but to replace it with some other phone. That would be my choice, but of course it is up to you what do you want to do.
Okay, update: i have managed to get it into download mode. What now?
Okay, farukdgn helped me with this through PM. Seems to be sorted now. Should at least tide me through until my new phone arrives
I tried Odin myself but it seems most of the reason it didn't work for me was not being able to find the right files.

Categories

Resources