Database Users

is HTC Sync needed to root Aria?

I could swear I read message(s) that said HTC Sync is from the devil and that if installed it must be removed...and now I see message that states explicitly that HTC Sync should be downloaded and installed
Which is it?

I installed it and then uninstalled it after rooting. Have you tried the adb commands after installing Android SDK to see if it recognizes your device? If that doesnt work then you might need to install the HTC sync for the drivers, you can always uninstall it afterwards after youre successfully rooted to proceed.

./adb devices sees it just fine once usb is detected
just can't get the device to show when pressing power from HDBOOT and RECOVERY
tried both linux kubuntu and xp pro

My issue with that, and with htc sync installed, was with my sd card. I tried a different 2gb sd card and formatted it with my pc using an external reader, then I put the sd card back into the device, tried again and it recognized it. I had to reformat the sd card externally a few times when trying.

I am really confused by all this droid stuff. I was just getting the hang of win mobile 6.1 when my tilt went on full tilt and crapped out on me. I got the Aria, and I want to root it but I just don't get it. Do I install that SDK thing on my PC or on my phone's SD card? If I change SD cards, will it stil be rooted?

Frrrrrrunkis said:
. Do I install that SDK thing on my PC or on my phone's SD card? If I change SD cards, will it stil be rooted?
Click to expand...
Click to collapse
you install SDK onto something like C:\android, by default the folder is called something else when unzipped into C:\
once you've rooted, changing SD card will not un-root your roots

Thanks for the tip, I finally got that SDK tools thing to appear the right way, even got the pdanet thing hooked up. Now to see if I can actually do this root thingy.

The driver is a little bit tricky . what i do was boot the phone as normal then plug it into the computer so it will recognize the phone then i boot into the recovery.
if i don't do that. the computer will not recognize my phone when it is in the recovery mode. i did change the driver around and play with it.

yeah the drivers are always tricky lol

Unable to Mount SD card

Hey all,
I have downloaded the Windows 7 64 bit drivers for my Fascinate. Installed them...but when i go to mount my SD card I can see it in Windows Explorer but it says CD drive F: Verizon Mobile. I cannot see anything on my SD card at all. How can I get this mounted. I am rooted and I have USB debugging on. Any other ideas on how to get this to work.

Pull down the notification bar at the top of the phone. Press mount sd card. Your problem mabe deeper than this but I just thought best to start simple. If u still can't get it we need more info like is it DI01,DJ05, or DL09
Sent from my SCH-I500 using XDA App

No, I cannot mount that way. I am on dl09. Very frustrating.
Sent from my SCH-I500 using XDA App

I had the same issue. I flashed Adrynalyne's latest voodoo kernel 01/21 low voltage and it seemed fixed it for me. I'm running DL09 supah clean 04 also.
See here and go to Test 4 this maybe your issue.
http://forum.xda-developers.com/showthread.php?t=915709&highlight=cd-rom

This is the official response from Samsung:
"There is no SD card mount issue on Windows OS. After user connects USB cable, Windows OS will recognize the device as CD-Rom, and the ToolLauncher_Bootstrap.exe will be running by autorun function. (WinXP only, Win 7 user should run ToolLauncher_Bootstrap.exe by himself ). At this point either user can ignore the installation of TL and use mass storage directly, or wait 30 secs timeout and the device will be changed to mass storage.
Another option is that user can change the settings -> USB setting to 'Ask on connection' from mass storage(default). It will allow user to go to mass storage directly by selecting mass storage.
But The mass storage is not working on MAC OS from previous version, and We have a fix for that in FROYO release."
Hope this helps.

I have the same issue when using certain kernels not sure if it is in the kernel or not. the only way i am able to mount the sd or use pda net is to plug the phone into the comp and reboot the phone after the phone reboots the comp recognizes it. I know this is not a fix but it does work everytime and the phone is recognized until the next time i reboot my phone without it being plugged into comp. This is a temp fix until you can find a better fix.

[Q] Verizon USB

Recently, I installed a theme incorrectly which lead me to factory reset my phone. I am currently trying to install dl09 but I can't seem to get into my SD card from my computer. When I plug the usb into my computer + phone, it pops up a window "CD Drive (F Verizon Mobile" instead of the usual pop up for my SD card. In the folder there are files to install Samsung usb drives but I don't need them so I just click exit. I'm assuming this is getting in the way of getting to my SD card and even though I install the drivers using Verizon's files, it keeps giving me the popup. How can I solve this issue? Thanks in advance.

Try rebooting the phone while its plugged into the pc, that usually works
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate

With DL09, that would happen to me, but all I had to do was wait a minute or so and the CD-ROM device would unmount and then the standard USB Mass Storage device would mount and the USB would kick in on the phone. No, really, that's not a joke
I also found that with both DL09 and the leaked Froyo, setting the phone USB to Ask on Connection worked better than arbitrarily setting Mass Storage for some reason.

My phone has started doing this after installing DL30, but I found that if you right click on the cd drive and click eject, your phone will then display the mass storage pop up and you can mount the sd card as usual.
Sent from my SCH-I500 using XDA App

Tried rebooting while phone was plugged in, no luck.
Waited when phone was plugged in, popup did not disappear.
Right clicked and ejected the F:\, still no luck.

Have you tried enabling USB debugging under Applications->Development? This fixes the issue for me on DL30.

[Q] Sideloading/accessing folders in SD

I have built an SD bootable CM7 card as described by verygreen, but when I try to create folders on that drive from my PC (filled with APK files) I can't see them on the Nook. I have no problem doing this on my rooted emmc Nook, but when I boot to an SD card (that I am setting up for my daughter's Nook) I can't access any other folders/files.
What am I doing wrong? (The box is checked allowing Unknown Sources and I am currently running 177).

Are you connecting the nook via USB or putting the SD card in your computer directly?
Sent from my NookColor using Tapatalk

The card is placed in a usb card reader (or a usd card reader), either one sees the files on the PC, but it will not find it on the nook. Even when I create a folder on the nook and move the disk over and copy a file into the new folder I can't see it on the nook.

You need to connect through the nook
Sent from my LG Optimus V using Tapatalk

Littlewhat said:
The card is placed in a usb card reader (or a usd card reader), either one sees the files on the PC, but it will not find it on the nook. Even when I create a folder on the nook and move the disk over and copy a file into the new folder I can't see it on the nook.
Click to expand...
Click to collapse
This is because the partition the computer sees is the boot partition... to access it in the nook... either in terminal or adb shell:
1. mkdir /sdcard/boot
2. mount /dev/block/mmcblk1p1 /sdcard/boot/
the items on the boot partition of the SD (including the folders and apks you put there) will be visible as /sdcard/boot
Pretty sure you'd have found it in the VG SASD thread and a few others... since I have posted this several times.

Thanks for the response. I'm not real familiar with ADB so I tried it with terminal and was able to create a directory but mounting gave me a 'permission denied' message.
(Sorry if this is old info, I've spent the morning combing the SASD thread and haven't found it yet, just too much info, thanks for taking the time to help some of us who are slower learners!)
Edit: learning slowly, used su to get into superuser (#) and made directory, but when I try to mount it says not found.

Littlewhat said:
I have built an SD bootable CM7 card as described by verygreen, but when I try to create folders on that drive from my PC (filled with APK files) I can't see them on the Nook. I have no problem doing this on my rooted emmc Nook, but when I boot to an SD card (that I am setting up for my daughter's Nook) I can't access any other folders/files.
What am I doing wrong? (The box is checked allowing Unknown Sources and I am currently running 177).
Click to expand...
Click to collapse
If you asked this question 2 weeks ago, I might able to give you the exact answer but since I wiped out the uSD CM7, I can't remember correctly what would happen.
However, based on my experience (+/- my memory loss), what you describe is all correct and that's what it is. Odd? Maybe, but don't panic.
Let's go slowly
when I try to create folders on that drive from my PC
Click to expand...
Click to collapse
you meant you created a folder in the "boot" partition on the uSD card?
a. if so, it's not recommended. Using the left over FAT32 partition instead
b. if so, try to use Root Folder app (it's a paid app) to access root folder (boot partition) directly on the NOOK. If you see the folder you created earlier, move it to the eMMC storage.
c. if not, pls tell us more

Yes, the SD card was accessed on my PC thru a USB adapter and a folder called 'APKs' was created in the boot sector. (I have also tried just adding the files into one of the other folders, but anything I add is invisible to the Nook).
So if I need to create a folder in other than the boot sector, I would need to use something like Easeus Partition Master to make that sector active and then create the folder and add appropriate files? (When I rooted my Nook directly to emmc it sure seemed a lot easier to access folders created by my PC.)
(Thanks again for all your help.)

That's much clearer, m8
Now, I think it's easier to get straighten.
1. From PC, using SD slot or usb-sd adapter, move (remove) the "APKs" folder off your NC to your PC, save it there, then eject the uSD off PC.
2. Insert the uSD into the NC and turn it on, make sure it boots into CM7 properly.
3. Wait until it completely load. Now using usb cable to connect the NC and the PC.
4. Watch the notification status bar on the NC, tap on it then turn on usb mass storage.
5. PC should recognize the NC and ready for use.
6. Move your "APKs" folder from PC into your uSD (it would probably named as CM7SDCARD)
Update: on item 6, I prefer to move the folder to the eMMC storage. I'm not 110% sure if the NC see "it" (it means the left-over FAT32 partition on the uSD card) or not, but I do believe, 99% it will.

Deleted folder on SD card (from PC) and verified reboot ok.
Connected USB cable to PC then to Nook, no notification bar comes up, but battery icon shows charging as well as the lighted n on the cable.
Tried to use Nook Tweaks to begin USB connection (both boxes checked).
Still no recognition from the PC that anything is connected.
Edit: I am using my rooted Nook to build this SD card for my daughter's new unrooted Nook and when I plug the rooted Nook into the PC I don't get any verification from the PC on it either. No change on the Nook either, just the charging light and icon indicator.

Tried to use Nook Tweaks to begin USB connection (both boxes checked).
Click to expand...
Click to collapse
I don't have the NC with me now so I don't know what "both boxes" are and need to be checked or not.

The USB Settings from Nook Tweaks has a "USB Host Mode" (to enable host mode to connect peripherals) and an "External VBus" (to allow charging and hosting).
Both boxes were checked.
I've read that some of these issues can be caused by a faulty cable. If so, are there other alternatives to connecting thru the cable to open this up.
I have also tried the MiniTool partition program but I have not been successful in getting the active partition to 'stick' . (It immediately reverts back to the root being active after I apply the changes.)

You definitely have to UNCHECK the "USB Host Mode".
I'm not so sure with the "External VBus" status but suggest leave it by default.

With nothing checked in the Nook Tweaks section, USB cable connected to the Nook and then the PC, there is no recognition or acknowledgment that the Nook is there from the PC. (This is true whether I use my rooted version or try after booting to the sd card.)
If it is a cable problem, I will need to replace that, but aren't there other ways to make the sd card usable?
I've tried making the 4th partition action using Minitool and also Easeus but it didn't work. (Minitool just reverts back to boot partition active immediately after I apply the changes.)

Slow down, MiniTool and partitioning have nothing to do with this. Don't make more mess.
a. when plugging NC to PC, do you see any indication on the NC's status bar? like usb debugging?
b. when plugging NC to PC, do you see any indication on the PC (running Windows)? like removable drive?

There is no indication on the PC of any new connection.
The only indication on the Nook is the lighted n at the end of the cable and the recharging icon in the status bar.
Edit: the reason I was providing info on the MiniTools experience I was having is because my original question was how to access a folder (and files) created on my sd-bootable disk on my PC but the Nook can't see it. One way to accomplish this is to write the folder/apks directly to the Nook thru the USB cable. Other alternatives are to use windows to access it on my PC but I need to be able to access the 4th partition (if my reading of the various posts is correct). MiniTools and Easeus are two options that allow you to activate the 4th partition but it has not worked for my yet.
The USB cable connection problem appears to be there whether I boot to emmc or to sd.
Edit: I was able to find a non-nook cable (for my Blackberry) and using it my Nook recognizes when I connect to the PC and executes the USB Mass Storage Utility which allows me to turn USB storage on/off. Unfortunately the PC doesn't add any new logical drives in My Computer. The device manager shows 2 B&N Ereader Disk USB devices but with the yellow ! by them.

The 4th partition you mentioned about should be taken care during the installation, using verygreen's instructions, if you do correctly. There is ABSOLUTELY no need to mess around with MiniTool or the a-like.
Another question, have you turn on the USB Debugging feature? (I don't remember where, NC not with me now). If it not, check it box, try to plug in PC using usb cable again. I expect at least the usb debugging indicator will lit up.

I checked the debug feature (part of settings/applications/development/) and it was not checked. I checked it and now I get the robot icon (USB debugging conntected) and the USB icon to toggle storage on/off. Still nothing in My Computer and the drives shown in device manager are still yellow ! .
The device manager says "This device cannot start. (Code 10)"

I know it would be too early to say but I gonna to say anyway "congratulation".
When you see those icons on the NC status bar, it's 99% that it would work.
Now, back to the reality.
1. Connect usb cable between NC and PC running Windows
2. As you can see those icons, tap on the status bar to bring up then tap on "USB Mass Storage" (or something like "connect to computer for file/folder transfer, NOT the debugging). Read the warning then tap to enable USB connection
3. Now, pay attention on the PC, if it goes smoothly as expect, by now, you now can access both storages (eMMC and left-over of the uSD card) from PC. If so, move your "APKs" folder over.
I wish you luck

1- cable connected, icons on nook show up
2- tapping on status bar gives access to USB Mass Storage utility and option to turn on/off USB storage - with USB storage set to 'on' there is no recognition on the PC
Device manager shows two entries under disk drives for B&N Ebook Disk USB device but both are tagged with yellow ! (which a right click shows "This device cannot start. Code 10")
Is there something I need to do to download a usable driver for this?
(OBTW thank you for your help and patience)
Edit: within device manager I uninstalled the two drives (while the nook was still connected and USB active) and then had it search for new hardware. This time it loaded the drivers and NO yellow ! . At that point the PC recognized the drives and I have been able to create a folder that is accessible by the Nook and the PC. Thank you for help in this.
I have also contacted B&N and have a replacement cable on the way (which seemed to be a large part of my problems). Thanks Votinh for sticking with me while I got this resolved.

[Q] Need Help. Phone Bricked

I was following this guide to root, install a custom recovery, and then flash a ROM onto my phone. I rooted successfully and created a back up. I then copied the backup onto my external sd card. I then put the custom rom onto my sd card and entered recovery mode on CWM. I wiped my device and then realized that the custom rom was the incorrect file. I then went to restore and it gave me an error md5 mismatch. I then went to restore of external sd card and it said it could not find the directory. I then went to restart phone and CWM said I was not rooted anymore and asked if I wanted root access and I hit yes.
My phone will not start and just remains in the Samsung loading screen with an unlocked graphic with the words "custom" under it. I am able to get back into CWM recovery but nothing else seems to work. I appreciate any help I can get. Thanks

domisterwoozy said:
I was following this guide to root, install a custom recovery, and then flash a ROM onto my phone. I rooted successfully and created a back up. I then copied the backup onto my external sd card. I then put the custom rom onto my sd card and entered recovery mode on CWM. I wiped my device and then realized that the custom rom was the incorrect file. I then went to restore and it gave me an error md5 mismatch. I then went to restore of external sd card and it said it could not find the directory. I then went to restart phone and CWM said I was not rooted anymore and asked if I wanted root access and I hit yes.
My phone will not start and just remains in the Samsung loading screen with an unlocked graphic with the words "custom" under it. I am able to get back into CWM recovery but nothing else seems to work. I appreciate any help I can get. Thanks
Click to expand...
Click to collapse
You can either use a MicroSD to SD adpater and the computer's card reader to copy a ROM over and flash it, or ODIN back to stock, and start over.

Ol' Dirty Bastard said:
You can either use a MicroSD to SD adpater and the computer's card reader to copy a ROM over and flash it, or ODIN back to stock, and start over.
Click to expand...
Click to collapse
Much better. Was that so hard? Thank you for details.
(jab)

Any ideas why it cannot find directory when I try to restore from my external sd card.

write protected
domisterwoozy said:
Any ideas why it cannot find directory when I try to restore from my external sd card.
Click to expand...
Click to collapse
Clueless here. Made a post about it.
I just discovered today more than just myself are unable to plug the handset into a computer to exchange files. I can get things off the phone onto the computer, but not vice versa.
Also the handset itself is fussy when it comes to viewing it's own external SD card. It would seem it doesn't take much for it to disappear, once in recovery.

fukenbiker said:
Clueless here. Made a post about it.
I just discovered today more than just myself are unable to plug the handset into a computer to exchange files. I can get things off the phone onto the computer, but not vice versa.
Also the handset itself is fussy when it comes to viewing it's own external SD card. It would seem it doesn't take much for it to disappear, once in recovery.
Click to expand...
Click to collapse
This phone does not support mass USB storage. It uses MTP and PTP protocols. This information is available in several threads in the forum. Now, of course, even with MTP and PTP you should be able to still transfer files from a PC to the Ext. SD card considering you have the correct drivers. Perhaps your SD card isn't playing nice with your phone? Have you tried removing the card from your phone and transferring files to it dierectly from you PC via SD slot or card reader? Have you tried other brands? I find Samsung cards work best, but that is just me, This will help to see if it is the phone (possibly cable) or the card that is having issues.
Also, you can check this out. It supposedly enables Mass USB storage for this phone...though it still says it doesn't work for the Ext. SD card. I have never tried it, so if you do it is at your own risk but maybe it will help? Good luck.
https://play.google.com/store/apps/details?id=com.mohammadag.samsungusbmassstorageenabler
The app says it is for the SIII, but people have reported it as working with the S4 as well.

thank you
scott14719 said:
This phone does not support mass USB storage. It uses MTP and PTP protocols. This information is available in several threads in the forum. Now, of course, even with MTP and PTP you should be able to still transfer files from a PC to the Ext. SD card considering you have the correct drivers. Perhaps your SD card isn't playing nice with your phone? Have you tried removing the card from your phone and transferring files to it dierectly from you PC via SD slot or card reader? Have you tried other brands? I find Samsung cards work best, but that is just me, This will help to see if it is the phone (possibly cable) or the card that is having issues.
Also, you can check this out. It supposedly enables Mass USB storage for this phone...though it still says it doesn't work for the Ext. SD card. I have never tried it, so if you do it is at your own risk but maybe it will help? Good luck.
https://play.google.com/store/apps/details?id=com.mohammadag.samsungusbmassstorageenabler
The app says it is for the SIII, but people have reported it as working with the S4 as well.
Click to expand...
Click to collapse
I am too happy to experiment like that. The AT&T S4 running GoldenEye with no add ons is the best darn handset I've ever enjoyed. I love being rid of the bloatware. I don't miss it a bit. I will fuss around with the SD interface as I do have resources like you mentioned, I can try a different chip. I didn't consider that a bad chip would cause the computer to consider the entire handset as "read only", yet you suggest it's possible?

fukenbiker said:
I am too happy to experiment like that. The AT&T S4 running GoldenEye with no add ons is the best darn handset I've ever enjoyed. I love being rid of the bloatware. I don't miss it a bit. I will fuss around with the SD interface as I do have resources like you mentioned, I can try a different chip. I didn't consider that a bad chip would cause the computer to consider the entire handset as "read only", yet you suggest it's possible?
Click to expand...
Click to collapse
Anything is possible and it would be a simple way to maybe help identify where the problem lies. Better yet, take your sd card out of your phone and try a transfer. That will let you know if it has anything to do with it. If it still doesn't work, it more than likely has nothing to do with the SD card.
Can you transfer files from your External SD card to your phones internal SD memory and the other way around (via a file manager on your phone)?
If you can, I can't see how it would be a "read' only problem.

scott14719 said:
Anything is possible and it would be a simple way to maybe help identify where the problem lies. Better yet, take your sd card out of your phone and try a transfer. That will let you know if it has anything to do with it. If it still doesn't work, it more than likely has nothing to do with the SD card.
Can you transfer files from your External SD card to your phones internal SD memory and the other way around (via a file manager on your phone)?
If you can, I can't see how it would be a "read' only problem.
Click to expand...
Click to collapse
I should unhook my phone from the 3.5mm jack and look into this. As I type, my S4 is piping in my playlist to provide the wife and I musical background for our activities. I remember using "Root Explorer" recently to delete a nandroid backup, and to move said playlist off the SD card into Phone memory. The "write protected" error showed up directly after building this playlist, using the computer to organize it. It's brand new, and as a good troubleshooter, we always look at the last thing you did different. I used the "windows explorer" to edit my playlist on the phone while it was plugged up together.
It's turning out to be a bigger deal than just myself, and I should pursue your recommendation for testing and reports, but it's not broken enough to fix and it's Sunday night, and the music is more important at this juncture.
Edit:
I powered down and then removed the Micro SD, and when I powered back up, it showed that cool padlock icon with the label "Custom" screen during boot up. I hadn't seen that screen on boot up since I used Casual to get a TWRP recovery.
I tethered the handset to the Desktop and opened the windows explorer. Obviously it just showed phone this time, instead of phone and card. I tested copying files and it worked fine, the "write protected" error was gone.
I unhooked, powered down, put the micro SD card back in, powered up and noted the boot up screen was back to normal. Tethered up again and voila! Files can be written to the phone and or the card and no more "write protected" error.
Funny little fluke. Problem solved. Curiosity remains.