Related
hey guys, for those that havnt seen it today Ubuntu has been released for the Nexus 7 and for both 8GB and 16GB Models! wondering if anyone in the community has figured out how to dual boot it or if it is even possible? thanks all!
Heres the link of how to install if your wondering
What you will need:
Nexus 7 Tablet (8GB or 16GB)
Standard MicroUSB Cable (should come with the device)
Ubuntu Nexus 7 Desktop Installer installed on your development system
Ubuntu 12.04 LTS or Later
Optional
Micro USB Host Cable (OTG Cable) - used for attaching keyboard, mouse, etc. Directions on how to get and use one of these are towards the bottom of this page.
Ubuntu Nexus 7 Desktop Installer
A simple one-click installer has been provided, and is available in a PPA.
sudo add-apt-repository ppa:ubuntu-nexus7/ubuntu-nexus7-installer
sudo apt-get update
sudo apt-get install ubuntu-nexus7-installer
Usage instructions for the installer are provided below.
Unlocking the Nexus 7
The Nexus 7 ships with a locked bootloader. You must unlock it in order to flash different images to the device. Fortunately, this is a trivial process, and you only need to do it once.
Warning: Unlocking the bootloader erases all data and resets the device to factory defaults.
Reboot the Android device into the Android boot loader. To do this, hold the volume down button and press the power button. Continue holding the volume down and power buttons until you see the boot loader UI. The device now displays the boot loader GUI, which looks like this:
Verify fastboot lists the device:
$ sudo fastboot devices
1234567891234567 fastboot
Start the bootloader unlock process:
sudo fastboot oem unlock
You are prompted on screen to unlock the bootloader on the Android device screen. Follow the on-screen directions to continue. Your screen should now look like this:
Complete the process by rebooting:
sudo fastboot reboot-bootloader
Or simply press the power button.
Installing Ubuntu on Nexus 7
Once all setup has been completed, the installation can start. To install, ensure the Nexus 7 is in fastboot mode, plug it into your computer (and make sure NO OTHER DEVICES are plugged in).
Find the installer in the dash (search for 'nexus'):
This will provide a Graphical Interface for installing Ubuntu. This tool will download the latest image automatically, and flash it accordingly. The flashing step should take about 2 minutes. Once the flashing is complete, the device will reboot and finish the installation. This step can take 10-15 minutes.
Returning your Nexus 7 to Stock Android
Warning: Disconnect ALL other mobile devices connected from your computer or they might get erased too. This will erase ALL DATA on your Nexus 7.
In case anything happens while developing, the system image for Nexus 7 can be found here: https://dl.google.com/dl/android/aosp/nakasi-jro03d-factory-e102ba72.tgz
After downloading the above tarball, uncompress it with the following:
tar zxvf nakasi-jro03d-factory-e102ba72.tgz
Then, place your machine into fastboot mode and run the resulting script:
cd nakasi-jro03d/
sudo ./flash-all.sh
You may get the following warnings, which you can ignore, the restoration will continue anyway.
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
Troubleshooting the Install
If you have problems installing the image, please use the following troubleshooting steps:
Detach the USB cable, restart the tablet back into fastboot mode, and re-attach the USB cable.
If problems persist, reboot your host PC.
If you still have issues, try a different USB cable.
If you have a 16G tablet, try using the 8G image.
If you still have issues after doing all this, return the image to stock using the directions above and re-try.
If none of that works, ask a question on Ask Ubuntu using the mobile tag, or ask for help in the #ubuntu-arm channel on freenode. If you believe it's a bug, file a bug against ubuntu-nexus7 in Launchpad.
Ehm, do i miss something or is this ubuntu only installation?
Edit: i mean, not dual boot, but only ubuntu
Do I need a mouse and a keyboard to use Ubuntu? Or I can also without them?
Rusl1TA said:
Do I need a mouse and a keyboard to use Ubuntu? Or I can also without them?
Click to expand...
Click to collapse
it has a built in touch keyboard/mouse, so you can do either way
you can use a touch screen for it, mouse and keyboard is compatible
what do you mean ubuntu only install?
sorry if you mis understood, but i posted the guide there but i am also curious if theres a dual boot avaliable.
is bluetooth not usable in the in ubuntu while installed?
And I saw this install method over at androidcentral.com and I dont recall it being dualboot. It did a complete install of ubuntu only and erased android from the device
As of right now, dual-booting is not an option, however, this build did just come out today, and in the coming weeks, we'll likely have many updates and options, so i'd hang tight. Needless to say, it's a great experience
yess dual boot will be awesome.
Download and follow the instructions in the complete Linux installation guide. (Its an app in the play store) It works pretty well and you can use Ubuntu, Debian and a few others without wiping your system. I prefer the Ubuntu lite version. Something else to try out
Sent from my Nexus 7 using xda app-developers app
technolust109 said:
what do you mean ubuntu only install?
sorry if you mis understood, but i posted the guide there but i am also curious if theres a dual boot avaliable.
Click to expand...
Click to collapse
Why did you title the thread as "Dual Boot Ubuntu" then?? Confused as well.
Change your thread title,its misleading.
yes my question was about dual booting, sorry if theres any confusion caused.
Folks, it's not that hard of a question when you actually read what the poster states. CURRENTLY, THERE IS AN INSTALLER THAT INSTALL UBUNTU TO THE NEXUS 7, BUT DOING THIS WILL CAUSE THE DEVICE TO BE FULLY WIPED FIRST REMOVING ANDROID. HE IS WONDERING IF THERE COULD BE [OR IS] AN INSTALLER THAT INSTALLS UBUNTU ALONGSIDE ANDROID TO BE ABLE TO BOOT THE DEVICE TO EITHER OS AS THE USER WISHES [ ALSO ASKING IF DUAL BOOTING BETWEEN THE 2 IS EVEN POSSIBLE.SO HE KNOWS IF IT IS WORTH HIS TIME TO INVEST IN MAYBE FIGURING IT OUT ON HIS OWN]. I am going to assume some form of dual booting would be possible as Linux bootloaders are generally very capable of booting OSes that use environments totally different from itself.
I am wondering the same thing as I am a very good technical user who can deal with a lot of issues, but have never gotten deep in to the programming side of things. I am shocked that for such an alpha build [really flaky Bluetooth, [Wi-Fi is solid] Unity crashes quite often and nVidia has had sucky Linux driver support for years now [wish they would take Linux more seriously but hey at least they have drivers]]. All leads to a painful experience for most [especially if you are not a nerd or techie and not used to dealing with very new alpha Linux type issues, if you don't mind it it does work].
Why wouldn't they have set it up as a dual boot to begin with? That way if you know something you need to get done can be done in Android and not in Ubuntu then you could just restart and choose the different OS. Not to mention if this is for modders and enthusiasts to test bed things on the tablet then they are going to most likely be some Android developers to start who would love to say use Eclipse to develop Android code for whatever and then oh no restart in to Android to I dunno test their work.
All that to say PLEASE SOMEONE WITH THE KNOW HOW let's figure out a way to fully dual boot a NATIVE Linux [not that install a loop file system and have it use VNC server to view the session junk you see on the Play Market, it's quaint and all, but not nearly as nice as a full Linux with full access to the hardware [I use it too, much love to backtrack] but am dying to dual boot an Android/More full [ I REALLY want Backtrack 5+ but Ubuntu would be worth keeping around until Backtrack gets around to working out their builds to be dual boot on some Android based systems] Linux as needed.
The approach that the Boot Manager app uses would probably work. They modify the /boot partition to point to a different device for /data than normal. Then you can switch between ROMs by flashing a different /boot partition. They automatically bundle the /boot partition into an update.zip and store them next to the image file on you SD card.
thanks for clearing it out RealPariah! by the way your username link to the band pariah orr? Cheers.
I would like to try this but what's the best/easiest way to back up my system? (I.e. app and game save data as well as for directory bind and folder structures). I tried clockworks backup process before, but I either did it wrong or it doesn't cover everything.
Can I just copy paste everything from my root folder?
Nikguy said:
I would like to try this but what's the best/easiest way to back up my system? (I.e. app and game save data as well as for directory bind and folder structures). I tried clockworks backup process before, but I either did it wrong or it doesn't cover everything.
Can I just copy paste everything from my root folder?
Click to expand...
Click to collapse
you might want to try and use titanuium backup and copy out the entire "titanium backup" folder onto your computer, so when you revert back to android you should be able to copy it back in and restore from titanium backup. hope it works.
technolust109 said:
you might want to try and use titanuium backup and copy out the entire "titanium backup" folder onto your computer, so when you revert back to android you should be able to copy it back in and restore from titanium backup. hope it works.
Click to expand...
Click to collapse
Huh great idea! Thanks, I'll give it a shot
all good mate! good luck!
Hello to every body
I tried to post on the > Acer Iconia A500 > Iconia A500 Android Development > seccion but it says that I do not have permissions.
Expecifly to this thread http://forum.xda-developers.com/showthread.php?t=1158260. So this is my post:
I found an boot.img file that I was flash with fastboot on my a200, this modified boot allow me to diseable the boot from mmcblk0p0 partition on my internal storage device, and boot from mmcblk1p2 partition on my external sdcard.
I was try with ubuntu 10.x first time, I can get input device support and touchscreen support, when I connect the usb keyboard do not work.
So I was try debian test edition, I was get usb support for keyboard and mouse device. I can get support for touchscreen.
I can get support for wireless card, the firmware for it appear to be on the kernel but lshw -c network show me that wlan0 is disabled and I can get to up it. so I can get update or upgrade the system, I will try to install some .deb manually download its depends one by one.
Libre office works perfectly, I get more memory support, I mean on android I get 700 Mb of RAM memor, on Debian I get about 900 Mb.
I just have a 2Gb sdcard so I can not install so much aplications right now.
Can somebody help me get wireless support for my device?
Thanks
montolla said:
I found an boot.img file that I was flash with fastboot on my a200, this modified boot allow me to diseable the boot from mmcblk0p0 partition on my internal storage device, and boot from mmcblk1p2 partition on my external sdcard.
Click to expand...
Click to collapse
I am trying to do the same thing right now. I found that the rootfs in "option 1" of this posting works:
http://forum.xda-developers.com/showthread.php?t=1158260&page=36
Can you tell me where you found the boot.img file you mention? The one I have tries to mount a non-existent partition. I have to connect a USB keyboard and type the commands to mount mmcblk1p2.
boot.img
Hello
I found the modified boot.img on http://forum.xda-developers.com/showthread.php?t=1158260, more exactly on http://www.mediafire.com/?p32l949n2s7la43.
So I put my acer on fastboot mode (poweron with volume down press and where brivate and show acer logo, move the lock rotate screen tow or tree times to get fastboot mode) and use fastboot.exe (windows, on linux fastboot.sh....) from the sdk of android and run this command: fastboot flash boot newrec.img.
So the fastboot.exe show write file and rebooting.
the device will reboot and you show on it the kernel booting (no boot screen is showing).
The next step you can found it on the thread. but is more or less format the sdcard, create a ext3 or ext4 partition small ass primary and boot, create a second one on ext3 or ext4 and put the rootfs or linux kernel on the second one.
I use the android app that allow to run linux chroot on android to install the debian core, its depends and the lxde desktop.
But fisrt of all you need to back up your boot.img from your device, you can use clockworkmode to make a nandroid back up, in the folder of the back up you can find your boot.img file to run android again.
you can use fastoot to get the actual boot.img but you need to find on google.
Good look!
Thanks for reply
chappell said:
I am trying to do the same thing right now. I found that the rootfs in "option 1" of this posting works:
http://forum.xda-developers.com/showthread.php?t=1158260&page=36
Can you tell me where you found the boot.img file you mention? The one I have tries to mount a non-existent partition. I have to connect a USB keyboard and type the commands to mount mmcblk1p2.
Click to expand...
Click to collapse
Hello to everybody
I was installed Debian "native" on my acer a200 16Gb one.
I used lxde with lightdm as desktop environment.
I get working my WiFi module and connect to my personal network.
At first time I get the correct firmware but for some reason it says that the hardware bottom is locked and I can not execute "ifconfig wlan0 up".
I move the lock screen switch and surprise! the WiFi interface works. The lock rotate screen switch seems to be the WiFi disable button on the laptop.
When I reboot the systems and boot again the WiFi just gone. I need to power off and turn on manually to get work again.
I can get the touchscreen device work. It seems to be recognized but the xorg.conf not work.
I try on gnome but my 2Gb sdcard class 4 can contain it. I need a 5 Gb one. I do not have enough money right now.
the a200 just have one usb port, so I can not use my usb keyboard and mouse at same time. I will need a USB switch perhaps.
The Bluetooth device seems to be detected but the lxde do not have support right now for it. I will try on gnome later.
So I need to work on touchscreen, Bluetooth and gps (I do not know hot to do that on Linux....).
The nvidia-tegra 2 seems to be detected but I do not how to tested.
Next I need to install directly on a200 internal storage and put android on the sdcard.
So how can I put Debian on internal storage? can I create a new partition table on it and create a swap partition, a /(root) partition on ext4 and home partition on external sdcard?
I will try lubuntu and ubuntu on the a200 later.
Thanks
touchscreen
montolla said:
Hello to everybody
I can get the touchscreen device work. It seems to be recognized but the xorg.conf not work.
Click to expand...
Click to collapse
according dmseg the only i see is regcognized is gyro, mic jack and usb port. where did u seen touchscreen, it could help me get it working
i dont know if its a good ideo to store debian on internal memory....first partition on sdcard should work if u can modify the boot.img
thanks for the hint with lockscreen alias wifi switch
A kernel Dev has arrived...
If anyone is still interested, I have compiled a bootable kernel with TOUCHSCREEN driver to run native linux on the Acer Iconia Tab A200. This kernel mounts the rootfs from the 2nd partition of the external SDcard (mmcblk1p2). I've posted it here on dropbox >>URL= https:[slash-slash]dl[dot]dropboxusercontent[dot]com/u/183913275/linux/neoboot-TSdebug2.img
Hello
I was install bedian permanently on my iconia a200.
But I need to use the emmc device but I can figurate how can I do that?
I can access fast boot or recovery. Justa start debian, no android etc.
Thanks
So after flashing the new lollipop update I found myself stuck in a bootloop unable to get into the android operating system at all. I used flashboot and the intel flash tool to try and restore to an older ROM. It forze at 91% with an "error:unable to mount /data" I then used the root tool to try and sideload and install the update.zip from adb shell. No luck. When I rebooted I got to a strange efi menu. Looked around, and it gives me the option to install with with windows?
Anyone have any ideas. I'm waiting for radio shack to open, its the only local place that sells USB otg cables locally.
Here are the photos
njking25 said:
Here are the photos
Click to expand...
Click to collapse
njking25 said:
So after flashing the new lollipop update I found myself stuck in a bootloop unable to get into the android operating system at all. I used flashboot and the intel flash tool to try and restore to an older ROM. It forze at 91% with an "error:unable to mount /data" I then used the root tool to try and sideload and install the update.zip from adb shell. No luck. When I rebooted I got to a strange efi menu. Looked around, and it gives me the option to install with with windows?
Anyone have any ideas. I'm waiting for radio shack to open, its the only local place that sells USB otg cables locally.
Click to expand...
Click to collapse
That is something interesting. It is asking which os to boot to, not install.
I'd like to know how you got into the bios? I am looking for a way to install Linux....
Sent from my YOGA Tablet 2-1050F using Tapatalk
njking25 said:
Here are the photos
Click to expand...
Click to collapse
Did you get this figured out?
I can see "fast boot" enabled. Have You tried to switch it off? any other menu is displayed?
Have You tried to "power+vol down" on it?
I've tried a few ways to get into the BIOS shown... all failed.
Maybe the only way to trigger the BIOS to show is to fully wipe/format the internal storage so the BIOS can't pick up droidboot or anything else. Quite risky though if it isn't the way.
I'm in no way telling anyone to do this and I have not tried it myself. I'd be curious to hear from any advanced users if they have ever completely wiped the internal memory and what options would be available to restore if things did go wrong.
zach181 said:
I've tried a few ways to get into the BIOS shown... all failed.
Maybe the only way to trigger the BIOS to show is to fully wipe/format the internal storage so the BIOS can't pick up droidboot or anything else. Quite risky though if it isn't the way.
I'm in no way telling anyone to do this and I have not tried it myself. I'd be curious to hear from any advanced users if they have ever completely wiped the internal memory and what options would be available to restore if things did go wrong.
Click to expand...
Click to collapse
This guy seems to have stumbled on it also. I flashed the stock kk firmware and I am trying to do it but can't get Lollipop update to work. But it won't boot after it fails so I am reflashing KK again.
http://forum.xda-developers.com/showpost.php?p=60490907&postcount=578
Thanks for the link workdowg,
I'm still trying to work out how they did it. Could do with a step by step and whatever files needed uploaded and linked to. Also the bit about not using windows startup programs.
zach181 said:
Thanks for the link workdowg,
I'm still trying to work out how they did it. Could do with a step by step and whatever files needed uploaded and linked to. Also the bit about not using windows startup programs.
Click to expand...
Click to collapse
If you try it do let me know. I need to get into the bios to get started on a dual boot to Linux on this bad boy...
I will let you know.
I just asked for the OP to clarify a few things before I go ahead. I may try Linux first with Windows 8/10 being the final install.
So... conclusion. we have to damage firmware to boot efi...
If we could swap img file before upload to tab (during this 25 second wait) we could make windows installation possible. Am i right?
zach181 said:
I will let you know.
I just asked for the OP to clarify a few things before I go ahead. I may try Linux first with Windows 8/10 being the final install.
Click to expand...
Click to collapse
@social-design-concepts suggested we should try to change the boot order using efibootmgr. I've been communicating with him. Here is the post in the Venue thread... http://forum.xda-developers.com/show...postcount=2083
Links giving 404
zach181 said:
Links giving 404
Click to expand...
Click to collapse
here it is again... http://forum.xda-developers.com/showpost.php?p=61108700&postcount=2083 it got truncated.
Thanks workdowg.
It seems it's not as clear cut as first thought. Mind you, I didn't expect it to be. I did try a HP keyboard with OTG in Android and that got picked up ok (No lights on keyboard)
I'm a bit in the same mind as Social-Design. I'd rather have a definite way to restore Android from a totally blank internal drive before I have a go. Just up to page 214 in the thread so it may be covered later.
UEFI soft brick?
Hi guys,
I accidentely tried to use the firmware on my 1050 as described in this thread. I can indeed load the UEFI BIOS with all its settings (even though most don't do anything). But unfortunately, I cannot load any OS. I always get the error "EFI Harddrive failed" - meaning it cannot boot fomr hardrive.
I have used an externally powered USB-HUB with mouse, keyboard and USB-Stick and connected to the 1050 via OTG-cable. If the stick is bootabnle with GPT x64 then it will boot from that stick. All 64bit windows versions that I tried failed to install with "ACPI_BIOS_ERROR". 32bit windows would not start, because the GPT is 32bit and the BIOS does not recognise it.
The best success I had so far was to copy a ISO from android-x86 on the usb stick. It will boot in live-mode from the USB. Not so suprisignly, mouse and keyboard are working, touch isn't. WiFI is working and the SD card is detected. I tried to install this version of android on the harddrive which works, but it installs the EFI GRUB bootloader which is not recognised by the BIOS.
I can also access the UEFI shell.
Unfortunately, I am running a bit out of ideas of what to do in order to get a normal system (or firmware) back. ADB-drivers obviously don't work (the Intel SoC driver is installed as well), so I cannot use the Phone Flash Tool.
Any ideas would be greatly appreciated.
Yosha1 said:
Hi guys,
I accidentely tried to use the firmware on my 1050 as described in this thread. I can indeed load the UEFI BIOS with all its settings (even though most don't do anything). But unfortunately, I cannot load any OS. I always get the error "EFI Harddrive failed" - meaning it cannot boot fomr hardrive.
I have used an externally powered USB-HUB with mouse, keyboard and USB-Stick and connected to the 1050 via OTG-cable. If the stick is bootabnle with GPT x64 then it will boot from that stick. All 64bit windows versions that I tried failed to install with "ACPI_BIOS_ERROR". 32bit windows would not start, because the GPT is 32bit and the BIOS does not recognise it.
The best success I had so far was to copy a ISO from android-x86 on the usb stick. It will boot in live-mode from the USB. Not so suprisignly, mouse and keyboard are working, touch isn't. WiFI is working and the SD card is detected. I tried to install this version of android on the harddrive which works, but it installs the EFI GRUB bootloader which is not recognised by the BIOS.
I can also access the UEFI shell.
Unfortunately, I am running a bit out of ideas of what to do in order to get a normal system (or firmware) back. ADB-drivers obviously don't work (the Intel SoC driver is installed as well), so I cannot use the Phone Flash Tool.
Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
You can get it to boot from USB? Get someone with to use tethered twrp and get a backup of the esp and fastboot partitions.
I have 2 things you can try if the goal is getting back to booting stock Android.
Yosha1 said:
The best success I had so far was to copy a ISO from android-x86 on the usb stick. It will boot in live-mode from the USB. Not so suprisignly, mouse and keyboard are working, touch isn't. WiFI is working and the SD card is detected. I tried to install this version of android on the harddrive which works, but it installs the EFI GRUB bootloader which is not recognised by the BIOS.
I can also access the UEFI shell.
Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
Have You tried booting any x64 linux iso from flash drive?
dreamnewbie said:
Have You tried booting any x64 linux iso from flash drive?
Click to expand...
Click to collapse
Thank you for your fast reply.
I just tried that with an Ubuntu Desktop Distro. It boots up from teh USB drive, keyboard and mouse are present. Wifi, sound, touch don't work but I can see the internal Harddrive and the sdcard in the file exsplorer.
Yosha1 said:
Thank you for your fast reply.
I just tried that with an Ubuntu Desktop Distro. It boots up from teh USB drive, keyboard and mouse are present. Wifi, sound, touch don't work but I can see the internal Harddrive and the sdcard in the file exsplorer.
Click to expand...
Click to collapse
extract and dd this to a usb drive and see if it is able to boot it View attachment 3415895 if it successfully boots replace the fastboot.img thats on the thumbrive with one for your devices and see if it boots. if your fastboot.img is named droidboot.img rename it to fastboot.img.
If you can successfully get your devices droidboot/fastboot.img to load you can then disconnect the usb-otg cable and reconnect it to your PC and use the phone flash tools to restore your device completely.
Nextbook Flexx 11
A 200-250$ 2-in-1 laptop.
CPU: 1.83 GHz Intel Atom Z3735F Quad-Core
RAM: 2 GBs
SSD: 64GBs
Screen: 11.6" Touchscreen
Ports: 1 x MicroHDMI, 1 x MicroUSB 2.0, 2 x USB 2.0
Micro SD Card slot
Installing every linux based OS(Android, RemixOS, Linux Distros)
Prerequisites:
A bootia32.efi file (Found in attachments)
A copy of your favorite linux distro
Rufus, UNetbootin, or a USB disk image write of your choice.
A flash you can wipe, and boot from
A little bit of time
Step 1: Setting up
First thing you'll need to do is use your image writer to write the iso to your USB.
MAKE SURE YOU SELECTED THE RIGHT USB DRIVE!
I cannot stress this enough, if you don't want to lose everything on another flash drive, or your hard drive, check and make sure you are using the right drive letter.
Do not restart now. We need to add some files to it.
Extract bootia32.efi and copy it to /boot/efi on your flash drive.
So this was some instructions I made for booting it, but this is much more complicated than it should be. You can totally disregard this spoiler.
Step 2: Booting
Plug your USB into your nextbook (if you haven't already) and turn it on/reboot it.
As its powering on, hold ESC to get into the boot options.
Click "Boot Manager" and select your USB drive.
IF IT DOESN'T SHOW UP, FORMAT YOUR USB DRIVE TO FAT32 AND GO BACK TO STEP 1.
Now, 2 things may happen, it may boot up perfectly, and from there, just follow the steps to install.
If it doesn't boot properly, we'll need to type a few commands.
Step 2.1: Grub Command Line.
So if it doesn't boot up properly, which chances are it wont, you'll be dropped into a command line.
This is grub, if you didn't know, and to boot we need to locate the drive its on.
First press FN+Ins to turn off NumLk, then type,
Code:
linux (hd
now if you press tab, it should list everything you have attached, for example:
Code:
hd0, hd1, hd2, hd3
The usb will most likely be hd0. So now you should have
Code:
linux (hd0,
If you press tab again, it will list off all of your partitions, or autofill one in.
Now you should have either:
Code:
1. linux (hd0,msdos1)
2. linux (hd0,gpt1)
Now, if you have this, type this(replace hd0,gpt1 with what you got):
Code:
set root=(hd0,gpt1)
then type
(new)Step 2: Creating a boot file.
So, now that you have the files copied over, you need to name the drive.
Right click your drive, and click Rename... (Remember the drive name, its important)
After you renamed your drive, create a folder at DriveLetter:/boot/grub
In that directory, create a file named grub.cfg
Now depending on your linux version, you'll have either syslinux, or grub already.
If grub: The file should already be there, so you can move on to step 3.
If syslinux: Find the isolinux.cfg or syslinux.cfg (probably in /syslinux or in /isolinux)
It will look something like:
Code:
label LinuxVersion
kernel /kernelFile
append initrd=/initrdFile (more options)
We're going to use these options to create our grub.cfg file.
Use this as a template.
Code:
menuentry 'LinuxVersion' {
search --set=root --label THIS_IS_WHERE_THE_LABEL_YOU_SET_EARLIER_GOES
linux /kernelFile (more options)
initrd /initrdFile
}
Step 3: Boot into your new OS.
Reboot your PC. When it turns back on, hold ESC.
You should be brought back to the BIOS area.
Press "Boot Manager" (you will need a mouse for this), and select your USB drive.
If you did everything correctly, it should boot.
Step 4: Go wild!
You should be booted, GO CRAZY!
There are a few problems with most distros, including:
No Wifi
No Bluetooth
No Gyroscope
No Audio
There are drivers online for these, but you need to be able to patch a kernel, and build/install a driver.
Wifi
Is the guide not working?
Go ahead and ask some questions, don't be afraid of help.
Useful resources:
Ubuntu with Wifi (Source)
Thats all the links for now. I will add more as I find them (hopefully to fix audio, power button, and rotation)
Huge thanks to Ian Morrison for the Ubuntu iso.
TAG
Any chance you're going to do the linux?
Reserved
I'm guessing that is where the linux how to, is going.
Dude.. You gonna finish this?
set code=(hd0,msdos1)
Then type
Type what? Need a complete tutorial here...
I'm so sorry
Chaosmstr said:
Dude.. You gonna finish this?
set code=(hd0,msdos1)
Then type
Type what? Need a complete tutorial here...
Click to expand...
Click to collapse
I apologize for the delay, busy with school and all.
You can't leave us hanging like this!
I'm not sure about OP here, but I have the smaller model of this device being the Flexx 10. Now I haven't tried to boot Android on it, but I have successfully booted Linux Mint with it.
First I would recommend using a USB OTG capable flash drive (they are available at office stores, walmart, and so on and so forth,) or an OTG adaptor instead of using a full sized usb. The reason for this is stability of the booted system as the connection of the keyboard dock does not appear to be extremely reliable. This may vary by model or device but I would still recommend it as you may need the full sized USB ports later.
Now instead of using Unetbootin, I used Rufus. I used the settings of GTP for efi and bios to write the image to the drive. I didn't mess with any other settings there. After that I had to get a file called bootia32.efi and then add it to the /efi/BOOT/ before the system would even try to recognize it. From there it was just waiting patiently while it booted. (use the instructions in the earlier post to get to the boot options of the UEFI) It took it a while to boot as I suspect the USB speed was rather slow.
As I didn't really have time to really mess with it and get to the point of install, I will list the issues I came across.
1: Automatic rotation of the screen did not work.
2: wifi (RTL8723BS SDIO)
3: bluetooth
4: sound
everything else seemed to work just fine though, even the volume rocker, windows button and power button on the tablet section reacted and did things. not entirely useful, but they did work.
Edit: forgot to mention that if you go through with the install, you will have to finish the install by doing some grub modifications to make it boot without a live disk. just a heads up.
Hmfan said:
I'm not sure about OP here, but I have the smaller model of this device being the Flexx 10. Now I haven't tried to boot Android on it, but I have successfully booted Linux Mint with it.
First I would recommend using a USB OTG capable flash drive (they are available at office stores, walmart, and so on and so forth,) or an OTG adaptor instead of using a full sized usb. The reason for this is stability of the booted system as the connection of the keyboard dock does not appear to be extremely reliable. This may vary by model or device but I would still recommend it as you may need the full sized USB ports later.
Now instead of using Unetbootin, I used Rufus. I used the settings of GTP for efi and bios to write the image to the drive. I didn't mess with any other settings there. After that I had to get a file called bootia32.efi and then add it to the /efi/BOOT/ before the system would even try to recognize it. From there it was just waiting patiently while it booted. (use the instructions in the earlier post to get to the boot options of the UEFI) It took it a while to boot as I suspect the USB speed was rather slow.
As I didn't really have time to really mess with it and get to the point of install, I will list the issues I came across.
1: Automatic rotation of the screen did not work.
2: wifi (RTL8723BS SDIO)
3: bluetooth
4: sound
everything else seemed to work just fine though, even the volume rocker, windows button and power button on the tablet section reacted and did things. not entirely useful, but they did work.
Edit: forgot to mention that if you go through with the install, you will have to finish the install by doing some grub modifications to make it boot without a live disk. just a heads up.
Click to expand...
Click to collapse
Sorry I'm coming back so late, I've been busy with life.
The Wifi issue can be fixed by building the driver (https://github.com/hadess/rtl8723bs)
The bluetooth wont work on most OS' because it relies on some windows drivers to work.
I might be able to find a driver for screen rotation/audio.
Another issue is the power doesn't get registered, and the touch screen is VERY flaky.
Kitsumi said:
Sorry I'm coming back so late, I've been busy with life.
The Wifi issue can be fixed by building the driver (URL removed per post restrictions.)
The bluetooth wont work on most OS' because it relies on some windows drivers to work.
I might be able to find a driver for screen rotation/audio.
Another issue is the power doesn't get registered, and the touch screen is VERY flaky.
Click to expand...
Click to collapse
I didn't really notice that power one as I did not use it long, but I think that is just an atom thing. My old n270 based aspire one does that too.
Really though, the way I would use it, I wouldn't miss screen rotation or the bluetooth, but the touch screen is the nuisance. What I noticed with it is that when the screen is forced into proper orientation (by use of screen rotation in the settings, you know without using the command line) is that the touch screen doesn't follow the new orientation correctly. It appears to have the portrait resolution set to the top left of the screen in landscape. That said, it works fine in portait. Or at least managably.
Hmfan said:
I didn't really notice that power one as I did not use it long, but I think that is just an atom thing. My old n270 based aspire one does that too.
Really though, the way I would use it, I wouldn't miss screen rotation or the bluetooth, but the touch screen is the nuisance. What I noticed with it is that when the screen is forced into proper orientation (by use of screen rotation in the settings, you know without using the command line) is that the touch screen doesn't follow the new orientation correctly. It appears to have the portrait resolution set to the top left of the screen in landscape. That said, it works fine in portait. Or at least managably.
Click to expand...
Click to collapse
Well, I decied to try and boot remixOS, and it works VERY well, so does android-x86 5.0
That being said, audio is a glaring issue.
When you tried Remix OS and say it worked very well. What do you mean? What actually worked? Obviously audio is what doesn't since you mentioned it. But am I to assume that screen rotation works as expected then?
I'm not willing to use REMIX OS personally as the whole android bit is a limiting factor to me. Unless it rooted of ccourse. but even then some of my prefered uses for Linux is lost.
Also hows the hardware acceleration?
How do I install the x64 version of Windows? I downloaded the ISO with the Media Creation Tool and it won't boot from the USB drive. I enabled USB booting and made sure secure boot was off, but it's not working. It keeps saying there's no USB device available.
Unfortunately due to the way that Windows works, the 64 bit version is not usable due to the bootloader difference. Even though the hardware of the device is capable of 64 bit code execution, the 32 bit UEFI Bootloader will only allow a 32 bit version of Windows or a 64 bit version of Linux with some EFI fiddling. And as far as I know there is not a way to fiddle with the EFI related workings of a Windows ISO so 64 bit Windows is not possible on these Nexbook devices or others with similar hardware (Asus t100 is a good example of similar device)
Hmfan said:
Unfortunately due to the way that Windows works, the 64 bit version is not usable due to the bootloader difference. Even though the hardware of the device is capable of 64 bit code execution, the 32 bit UEFI Bootloader will only allow a 32 bit version of Windows or a 64 bit version of Linux with some EFI fiddling. And as far as I know there is not a way to fiddle with the EFI related workings of a Windows ISO so 64 bit Windows is not possible on these Nexbook devices or others with similar hardware (Asus t100 is a good example of similar device)
Click to expand...
Click to collapse
That's really dumb. Most Windows devices are 64-bit nowadays. Why would they put in a 64-bit processor but not allow x64 operating systems?
You're guess is as good as mine on that one. Ask Microsoft on that one. They used the 32 bit version because Microsoft will only give the "Windows XX (originally 8.1) with bing 32bit for free. Which keeps the device cost down. Kinda hard to to sell a cheapskate device when it ends up costing as much as a better speced laptop.
Where can I find recovery images for this? I messed up and now I don't have audio or touchscreen drivers.
You can try this web site from Efun themselves
http://nextbookusa.com/recovery/index.html That is their official recovery download site.
(apparently I can post links...)
Hmfan said:
You can try this web site from Efun themselves
http://nextbookusa.com/recovery/index.html That is their official recovery download site.
(apparently I can post links...)
Click to expand...
Click to collapse
I tried that. It says there's no recovery option for this model....
Do you have this tablet? Do you think you could do a driver backup and upload it here? Or create a recovery image and share it?
1. Download Android Nougat 7.0 ISO file[Developed by Android x86].
2. Download Rufus win App to Create Bootable/Live USB.
3. Insert USB with Minimum 4GB and select Downloaded ISO file and finally start.
4. After Finishing, Create New/ Separate Partition in PC for Android to be Installed with Minimum of 16GB Disk Size and Format it as FAT32.
5. After formatting, Reboot PC.
6. Boot PC from USB.
7. Select Install android x86 to HDD.
8. Now In bluescreen Select the Separate Fat32 formatted Partition to Install.
9. Do not Format.( I didn't formatted and it works fine).
10. Install Boot Loader GRUB.( It will replaces default Windows Bootloader).
12. Next it shows up that your are having Windows Partition and asked to create boot item for windows. Select Yes for that else you won't be able to boot into Windows next time.
13. Next Select Skip for EFI GRUB2.(I Skipped and worked for me, I think because I'm having Legacy PC).
14. Then Select Yes to Create Read/Write enabled system directory.
15. Now To create data.img, select yes and then Enter the Size you need for System Memory in MBs (1GB-1024MB).
16. Now Accept Reboot and then Boot Android from GRUB Menu.
17. Thats all . You have Successfully installed Android 7.0 nougat in your PC HDD.
Also I Made Video Tutorial in YouTube for Better Understanding. You can Checkout if you don't understand or if any error pops.
https://www.youtube.com/watch?v=o90aPj4zT-M(TechGeekShan).
Follow Me
http://facebook.com/techgeekshan
http://twitter.com/techgeekshan
https://www.reddit.com/r/TechGeekShan/
http://instagram.com/techgeekshan/
http://www.techgeekshan.in/
Wow thanx mate, will give it a try and will give a feed back.
Sent from my SM-G935F using XDA-Developers mobile app
silverrum said:
Wow thanx mate, will give it a try and will give a feed back.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah.. You are welcome and we must Appreciate the Developer who developed Android Nougat x86..
Don't work for me((( Laptop wan't boot after installation...
gmikes said:
Don't work for me((( Laptop wan't boot after installation...
Click to expand...
Click to collapse
Its because of EFI/UEFI Computers
Why not work
Shanmukarajan said:
Its because of EFI/UEFI Computers
Click to expand...
Click to collapse
Why not Work ?
If I install it on my PC, do I access google play store like normal?
successfully installed on Z3735F Bay Trail-T windows 10 tablet. I don't need windows 10 OS anymore, so made one partition and install Android 7. It books OK, WIFI works fine. BUT!!!!! All the physical buttons don't work. Power button doesn't work, so there is no way to turn off the system. Volume Up and Down button also doesn''t work. But touch screen works fine. How to solve this problem? any idea? My tablet is Unbranded Tablet 10.1 from Best Buy
hey,
i got it up & running on my uefi windows 10 lenovo yoga (after some struggle i also have dual-boot). my question - how do i get gapps and supersu? it's not like you could simply flash some zips, as there is no recovery
No Playstore!! Browser does not download files!!!
So after wasting 400mb of data and roughly 30 minutes of my time, I discover that there is no preinstalled PlayStore, the preinstalled browser will not download APKs and trying to install apps from the online MarketPlace only discovers devises that the email used to Sign In with is associated to, not the device this is installed on.
These things SHOULD by all ethical means be stated in the description to prevent others from wasting both their time as well as their data.
I want to see a solution to these problems Shanmukarajan. Should you decide to neglect this issue, I won't hesitate to have this post reported to the moderators.
Thank you in advance for your prompt support on the matter.
Stevo | True.Tech.Tabs
+1 360 **** ***
there is just one issue.
you can not create a data.img file that is larger than 4GB on a fat32 partition...
how do we fix that?
It’s installs fine but when restarts windows is just starting every time and it’s not coming up with step 12 asking me about windows partition and creating boot item
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Sent from my Xperia X Compact using XDA Labs
Godecki said:
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Sent from my Xperia X Compact using XDA Labs
Click to expand...
Click to collapse
Have you tried selecting yes to GRUB 2 during installation? It's been a little while since I went through the process, but I believe that was what I had to do to get it up and running.
Godecki said:
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Click to expand...
Click to collapse
Yeah I have the same issue with my Sony VAIO Duo 11. To start from power off I have to hit the special Duo Assist button, then F11 to boot from usb, then go thru the (re) install every time, so boot takes a couple of minutes, but it always bring me back to the same great working Android with all apps and setting unchanged. I don't understand, but I just happened onto it. Be sure to not format or install any grub (not really sure about grub or grub2), but yes to make it writeable. Then you get an awesomely fast Android.
I don't even want Windows on that machine, but I'm afraid to kill all the partitions and start from scratch as the Duo has some weird builtin Windows boot stuff hard wired. I'm not sure if Android could boot without the Windows partitions.
When I am creating a new partition with 16 GB of space does it mean that Android is going to use just this partition and 16 GB or is it just for the installation files and Android will see my whole HDD as the internal storage?
Could you please let me know how you got it up and running? I am on a UEFI yoga as well, but after the installation,
grub doesn't show up and my computer boots automatically into Windows
Thanks in advance
bombaglad said:
hey,
i got it up & running on my uefi windows 10 lenovo yoga (after some struggle i also have dual-boot). my question - how do i get gapps and supersu? it's not like you could simply flash some zips, as there is no recovery
Click to expand...
Click to collapse
ZOOMA7997 said:
Could you please let me know how you got it up and running? I am on a UEFI yoga as well, but after the installation,
grub doesn't show up and my computer boots automatically into Windows
Thanks in advance
Click to expand...
Click to collapse
Did you change the boot sequence in bios? Select android to boot 1st, then Grub should ask you which os you want to launch. I installed grub 2. I also went with the triple boot. My laptop is an Asus x401a with windows 7. Along with ubuntu and android. x86 Nougat.
A little help here mates,
I installed it alongside a windows 7 ultimate.
Gave it an 80gb Partition (fat32)
So I'm planning a dual boot here.
Here's my Steps:
used rufus to create bootable from android-x86-8.1-r1.iso
booted to Flash drive
installed android to 80gb partition (with grub/windows boot entry/ and data image of 2048MB)
after installation, Reboot to test boot options
grub didn't show up, booted directly to win7
Did some researches, and from those researches I should disable SECURE BOOT, but bios don't have that option.
Also tried EasyUEFI Tool which didn't even work in windows 7
Also, no settings for UEFI or Legacy.
Boot Order doesn't show Windows bootmanager or grub too, only HDD....
I installed android in ASUS Eee Notebook Laptop 1201b
I think the only problem here is grub cant load, but I run out of solutions, so here I am asking for help.
every android on work fine in my tablet(z3735f) but there is a bug in every os no sound in headphone any one tell me how to fix it