My droid X reboots everytime I connect to QXDM.
I've put it in diag mode by holding down the camera button on boot, I've setup the connection through QPST by adding it through COM4 port. I can do Service Programming, but every time I connect it to QXDM it reboots, and doesn't stay in diag mode.
I've also tried through HW VSP to setup a virtual com port without diag mode, and yet it still reboots every time I try to connect to QXDM. (Also, I can't do QPST service programming through HW VSP.)
Anybody have an idea why this is? Do I have to root my phone to connect it to these programs?
I just told my mom I'm Special
Related
Please, help
I can't get Mogul to connect to PC in DIAG mode (##3424#)
I put it in DIAG mode (##3424#) a screen saying DMR v 1.87 pops up. Then I connect it to PC, but PC don't see Mogul as hardware. In ActiveSYNC mode I connect Mogul with no problem. A few weeks ago everything was Ok. I was able to connect it in in DIAG mode and work with QPST.
Hey guys need help getting my phone to connect to PC in diag mode.
My phone will enter diag mode (thru the ##3424#) but my computer won't detect it as a port (in device manager)
I verified that it wasn't the USB cable or my drivers by connecting another phone in diag mode (s3)
Any assistance would be appreciated.
ps I tried the 9090 trick no luck
Hey guys need help getting my phone to connect to PC in diag mode.
My phone will enter diag mode (thru the ##3424#) but my computer won't detect it as a port (in device manager)
I verified that it wasn't the USB cable or my drivers by connecting another phone in diag mode (s3)
Any assistance would be appreciated.
ps I tried the 9090 trick no luck
I'm trying to connect to my device using QPST, but the device is not showing up in the COM ports. I've tried to delete all the usb devices related to the device in device manager but all to no avail. And none of the dial codes I'm using seem to be working. Only ones that work are those that start with "*#*#" and end with "#*#*". Only com port I get is the default COM1, to which there is no phone connected. The other problem is that the drivers I have doesnt seem to be working, I even had to install them by disabling hardware signing. Device is not detected in download or recovery mode either.
Processor is a MSM8212 and the mainboard is MSM8610.
I'm on windows 8.1
Your device is in regular mode... to access DM you HAVE to have it in DM mode.... so try EFSpro to switch your phone into DM mode or you will have to keep looking for a dial pad code. Some handsets allow sysfs to enable DM mode too. Have a look and do some research. Your QPST drivers should come from the manufacturer... ie I am using samsung drivers to use the DM port, not drivers from QPST.
Hello friends.
I have spent 2 days reading the forums and finally decided to post after not being able to get my XT1687 to switch into DIAG mod so that I can use QPST.
The device is boot loader unlocked, flashed with TWRP, running Arrow OS Pie.
No trick such as using setprop sys.usb.DM or Diag, or anything seems to work. Also, no dialer codes seems to work.
All I can manage to do with Shell is reset the USB connection.
No combination of Vol + UP or 3 finger "saluting"... while in bootloader on BP Tools, QCOM, Tools Mode (Switch to Enable) seems to work. I have tried with every setting of USB Configuration combined with debugging on, or debugging off. Nothing will prompt my Windows 10 machine to call for several of the version of the Qualcomm driver's that I have installed - and the only remotely close to a COM Port is when I set it to USB Tether and sets up as a network adapter but I have not been able to manually update that or any other driver so that it establishes a COM port.
Like, am I just stupid and this doesn't have Qualcomm hardware in it or something?
Very much appreciate any guidance.