Related
When I bought my used Nook Color, I used the 8 re-boot method to flash back to 1.0.0 ... de-registered... registered... updated to 1.1.0 ... then used Auto-Nooter 3.0 to get my perfect device.... Everything has worked great until the BN 1.2 update totally ruined by device!! I have tried booting off the uSD card for AutoNooter3.0 but doesn't work... I tried using 8 re-boots to get back to 1.0 (to start over)... doesn't work... i get the Android screen and it stays stuck on that screen no matter what I do!!! Please somebody help me!! I want to go back to stock 1.0 ... then 1.1 then Auto-Nooter 3.0... restore my Titanium... and turn off Auto-Updates (which I've just found instructions for.)
Thanks,
Kevin
Do you want to stay on eclair? I would highly recommend using one of the modified stock froyo (modified 1.2 update) roms from this site and flash it per site instructions. Then you could manual nooter it. Then due to cuurent limits on the root of 1.2, I would go to the dual boot thead and set up dual boot with froyo (1.2) on the second boot and cm7 on the first. Nothing beats cm7, especially if you add dalgrin's overclock to the works. If you end up not liking the setup, it's very easy to recover to stock.
No, I really just want to get back to my 1.1.0 ... with Auto-Nooter 3.0... restore my apps... and then turn off Auto Updates.
Actually, my problem right now is that I cannot seem to flash back to stock at all!!
You could try this if you have not already.
http://forum.xda-developers.com/showthread.php?t=945838
If you already tried to install a stock rom over the mess that B & N made, all you may need to do is a wipe data/factory reset from ClockworkMod Recovery. That might clear up some boot issues for you.
dapazz238 said:
.... and turn off Auto-Updates (which I've just found instructions for.)
Click to expand...
Click to collapse
Is there a confirmed method to prevent auto updating? <Link please?>
Look for the Pre-rooted 1.1 upgrade and flash that. I am not sure if it blocks automatic update.
This worked!!!
bonez318ti said:
Is there a confirmed method to prevent auto updating? <Link please?>
Click to expand...
Click to collapse
This is what I've used:
http://forum.xda-developers.com/showthread.php?t=946969
So far so good. No OTA and I've been on autonootered 1.1.0 since before the 1.2 update, and WiFi always on for the past couple of weeks.
I have a NC 1.2. I am able to root using a CWM 3.0.2.8 Msd card with Manual Nooter no problem. The problem occurs when I shut it off and then reboot. It gets to the part where the words "Nook Color" start scrolling across the screen. "Nook Color" completes one time successfully and when it starts scrolling again, it stops halfway through the first "o" in "Color", and just repeats indefinitely. The only thing I could do is completely reset, eight failed boots. At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off. Any ideas would be greatly appreciated.
reebz said:
I have a NC 1.2. I am able to root using a CWM 3.0.2.8 Msd card with Manual Nooter no problem. The problem occurs when I shut it off and then reboot. It gets to the part where the words "Nook Color" start scrolling across the screen. "Nook Color" completes one time successfully and when it starts scrolling again, it stops halfway through the first "o" in "Color", and just repeats indefinitely. The only thing I could do is completely reset, eight failed boots. At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off. Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
What version MN are you using? You’re not wiping anything when you flash MN, right?
reebz said:
…At first I thought it may be an older version of CWM on my Msd card so I made a new one with v. 3.0.2.8 and rooted successfully, but first time I shut it off and rebooted, it happened again. I am thinking only thing to do is never turn it off.
Click to expand...
Click to collapse
Are you saying that after you flash MN, you remove the SD card, it will fully boot up into the OS, then when you turn off the device and try to turn it back on, it will then not boot up? Or, are you saying that after you flash MN, you remove the SD card, and then the device fails to boot?
It sounds to me like you are wiping the system before you flash MN, but until I get the answers to the above questions, I can’t say for sure. MN is a add on pack for the stock OS, not a full rom, so you don’t wipe before you flash.
I have latest version of MN. I do not wipe anything. I boot into CWM and install MN with a msd card. Upon successful installation of MN, I remove msd card and reboot successfully that one time into a rooted NC. I can use Gmail app, download and install from both Android and Amazon markets. However, if I power down completely and reboot, it loops as explained in my OP.
reebz said:
I have latest version of MN. I do not wipe anything. I boot into CWM and install MN with a msd card. Upon successful installation of MN, I remove msd card and reboot successfully that one time into a rooted NC. I can use Gmail app, download and install from both Android and Amazon markets. However, if I power down completely and reboot, it loops as explained in my OP.
Click to expand...
Click to collapse
Are you updating Adobe Flash? You can't directly update Adobe Flash from the Nook Color. The most common issues that will cause a boot loop on a NC after having a fully working device, are installing the wrong kernel, and updating Adobe Flash from the Market. If you updated Adobe Flash, download the attached file, and flash with CWM. The file should delete the old flash player, and install the updated one. This should give you a working device again. If it does work for you, please report back here so others will know what the fix it.
GMPOWER said:
Are you updating Adobe Flash? You can't directly update Adobe Flash from the Nook Color. The most common issues that will cause a boot loop on a NC after having a fully working device, are installing the wrong kernel, and updating Adobe Flash from the Market. If you updated Adobe Flash, download the attached file, and flash with CWM. The file should delete the old flash player, and install the updated one. This should give you a working device again. If it does work for you, please report back here so others will know what the fix it.
Click to expand...
Click to collapse
I have updated Flash Player from the Market after rooting. If I remember correctly, I've powered down after rooting and installing numerous apps, including Flash, and rebooted . Maybe that's the culprit. I have not installed a different kernel. I'll go ahead and install the attached zip, with much thanks, but I don't know if I want to power off and reboot, for fear of dreaded boot loop.
Ok, I installed Flash Fix and rebooted, and the same boot loop is occurring. Looks like time to reset and reroot, and for now, never turn it off.
reebz said:
I have updated Flash Player from the Market after rooting. If I remember correctly, I've powered down after rooting and installing numerous apps, including Flash, and rebooted . Maybe that's the culprit. I have not installed a different kernel. I'll go ahead and install the attached zip, with much thanks, but I don't know if I want to power off and reboot, for fear of dreaded boot loop.
Ok, I installed Flash Fix and rebooted, and the same boot loop is occurring. Looks like time to reset and reroot, and for now, never turn it off.
Click to expand...
Click to collapse
I just realized that I missed a step in the install script for that file, that is why it did not work for you. Yes, adobe flash is your problem. To update Adobe Flash on the nook color, you have to uninstall the old version, and then install the new adobe flash.
For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.
Ok, thanks, I will reluctantly give this a try when I get home from work.
Edit: Ok, now. I'm trying to uninstall Flash Player and having difficulties. It doesn't show up in the app drawer, so I go to Market to see if there is an uninstall option, but there is only an update option, so I updated, and then uninstalled to see if that would work, but it still showed up in "my apps", in market. I opened up app drawer and selected manage apps and found it, but selecting the uninstall button does nothing. I then tried installing Titanium Backup and after installing, Titanium Backup won't open and doesn't even show up in my app drawer. So, I'm a little stymied now. Unsure what to do next
reebz said:
Ok, thanks, I will reluctantly give this a try when I get home from work.
Edit: Ok, now. I'm trying to uninstall Flash Player and having difficulties. It doesn't show up in the app drawer, so I go to Market to see if there is an uninstall option, but there is only an update option, so I updated, and then uninstalled to see if that would work, but it still showed up in "my apps", in market. I opened up app drawer and selected manage apps and found it, but selecting the uninstall button does nothing. I then tried installing Titanium Backup and after installing, Titanium Backup won't open and doesn't even show up in my app drawer. So, I'm a little stymied now. Unsure what to do next
Click to expand...
Click to collapse
Titanium Backup is going to be your best bet to do the uninstall process. When you selected update Flash from the market, then went and uninstalled it, you were only uninstalling the update. If TB installed, then it should show up in the app drawer of Zeam launcher. You can go into the market, and select to open it from there. Sometime it will not open on first attempt, because it is trying to ask you to give it root permission. If you still have trouble with it not opening, then uninstall it, and try to install it again. You can also open up the “Superuser” app to make sure that it has not been denied root permission.
TB definitely didn't appear in Zeam app drawer. I'm charging now and give it another shot in a bit.
Edit: Success. I got TB installed. I made a stupid error. I only installed the paid app, not the free also. I got Flash uninstalled and installed your Flash Fix.zip with numerous reboots with no boot loops.
GMPOWER, Thanks for your assistance
GMPOWER said:
For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.
Click to expand...
Click to collapse
I don't normally bump old threads, but this just saved me
Thanks a lot, I was at wits end figuring out why it was boot looping.
dreadwing said:
I don't normally bump old threads, but this just saved me
Thanks a lot, I was at wits end figuring out why it was boot looping.
Click to expand...
Click to collapse
Same here. Big thanks to GMPower! (My first post here, now I can use the Thanks button!)
Total noob question. This is my first time rooting. I got the root to work fine but updated Flash before finding out about the loop. I'm not sure what I'm supposed to do to fix this problem. OP in this thread said he reinstalled MN 4.6.16 via bootable SD with CWM and could get his nook to boot up. I tried that and rebooted but I'm still getting stuck in the loop.
Do I need to wipe my nook before reapplying MN?
dahcheet said:
Total noob question. This is my first time rooting. I got the root to work fine but updated Flash before finding out about the loop. I'm not sure what I'm supposed to do to fix this problem. OP in this thread said he reinstalled MN 4.6.16 via bootable SD with CWM and could get his nook to boot up. I tried that and rebooted but I'm still getting stuck in the loop.
Do I need to wipe my nook before reapplying MN?
Click to expand...
Click to collapse
Use the zip file in post #7 (in this thread). Drop it onto the same SD card you used to load MN 4.6.16. Put the SD card in and it'll boot to CWM....then flash that zip file the same way you flashed MN. Then, power off the NC, remove the CWM SD card and put in your regular SD and turn the NC back on. That should be it...no more boot loop.
I've got the same issue as the thread started and I downloaded the zip from post 7 and flashed it just like I flashed MN, but it's still boot looping. It gets a bit farther into the "Nook Color" logo but keeps repeating.
Boot Loops NC 1.3
GMPOWER said:
For all future references, I have attached the working Adobe Flash fix file. It includes flash version 10.3.186.3, that was released today. It has been tested to work, and you can allow auto-update in the market without future problems.
Click to expand...
Click to collapse
This problem started for me on Rooted 1.3. October 5th, Applied this fix.
Thanks GMPOWER
I figure I will explain my problem in more detail. I am working with my girlfriend's Nook trying to get it rooted. The first time I did she had 1.2 stock and I rooted it successfully. She updated flash not knowing that it would cause a boot loop. I had no idea how to fix it so she set it back to factory settings and procedded to update to 1.3 to see if that would solve the boot loop. I rooted it again and it started boot looping again. I found this thread and the flash fix. I flashed it onto the Nook and it fixed the loop problem.
Well she found out that the marketplace has limited visibility with 1.3 and wanted to go back to 1.2 to have her full visibility back. So she factory reset it again, I rooted it again and it started boot looping again. This time though the fix from post 7 isn't helping. I flash it and then reboot and it loads the "Nook Color" logo once fully and then stops and starts it over again and gets stuck at "Nook Col".
Is there anyone who might be able to help me with what the problem is, or am I gonna have to reset it back to stock, use Titanium Backup to remove flash and then use the zip from post 7? I know that it's not a root problem because I successfully rooted my mom's Nook before my girlfriends and her's is working fine.
Followed your instructions and my problem solved, many thanks!
johnny15 said:
Use the zip file in post #7 (in this thread). Drop it onto the same SD card you used to load MN 4.6.16. Put the SD card in and it'll boot to CWM....then flash that zip file the same way you flashed MN. Then, power off the NC, remove the CWM SD card and put in your regular SD and turn the NC back on. That should be it...no more boot loop.
Click to expand...
Click to collapse
my first post. thanks GMpower
just had this happen to me too. I've tried the flash update, and I get slightly more of the nook color boot graphic but it still hangs.
any thoughts?
Update 20111117: Updated .zip file to Adobe Flash 11.1 and AIR 3.1.
Update 20111020: Updated .zip file to reinstall Flash and AIR, previous version didn't properly fix AIR.
Steps I used to update Adobe Flash (to version 11.0) and AIR (version 3.0) so it doesn't update automatically and thus get me back into the boot loop cycle (again):
Go to Titanium Backup ( Pro )
You need to uninstall with this since these are system apps
Buy a Pro key and keep it on your SD card root, since this app will save your bacon
Uninstall Adobe AIR and Adobe Flash Player from Titanium Backup
It will warn you that you are uninstalling a system app, that's OK
I think that is why the update through Market isn't working
Open Market, Install Adobe Air (3.1.0.488 as of this post) and Adobe Flash Player (version 11.1 11.1.102.59 as of this post)
Nook seems to be working after several reboots. Also, note that Adobe updated their apps. After following the procedure above, I was able to update via Market without any problems with bootlooping.
Obviously, the above steps only work BEFORE Adobe gets auto-updated and you get in the boot loop cycle. If you are already in the boot loop cycle, download this file (Updated link, should work better this time):
FlashPlayer11.1_AIR3.1_Update_Fix_20111117
and install it using a ClockworkMod Recovery SD card.
Get a ClockworkMod Recovery SD card
http://forum.xda-developers.com/showthread.php?p=11987469
Put the zip from the above post on the SD card
Reboot your Nook with the SD card inserted
Install from Zip, Select zip from SD card, select the flash update
This basically will uninstall flash and air as system apps and install as a user apps. This is based on the zip from GMPOWER which updated flash to 10.3, which worked for some but not others, perhaps because it didn't touch Air:
http://forum.xda-developers.com/showpost.php?p=16526691&postcount=7
Also note, I have been through several cycles of restoring backups, restoring to factory, re-rooting, etc. this last week, so I was getting very annoyed and cautious. I think I was able narrow it down to just the Adobe updates causing my problems. I have been able to update ROM Manager, Superuser, and just about everything else with updates; and besides the Adobe updates, everthing worked, and I don't currently have a boot loop problem.
Note, I didn't update Superuser or ROM Manager until after I applied the above updates to Flash and AIR. After several reboots, my Nook is still working fine.
For those of you who are still having trouble getting your Nook back, and the attached zip doesn't work for you, you can do the following. Using the instructions on this site, I got my Nook back up and running to factory new condition:
http://mrm3.net/nook-color-recover-any-bricked-device/
(Quick method at top, not older methods below; instructions slimmed down from several posts here at XDA, updated for stock 1.2) also here on XDA:
http://forum.xda-developers.com/showthread.php?t=914690 (original restore to stock post)
http://forum.xda-developers.com/showthread.php?t=1050520 (update for stock rom 1.2)
Then, I registered my Nook (again).
At this point, I could have tried to update to 1.3, but my patience was a bit low, so I didn't go for it. If you do, be sure to follow the appropriate ManualNooter instructions here:
http://forum.xda-developers.com/showthread.php?t=1054027
Since I was still on Stock 1.2, I rooted using ManualNooter 4.6.16
(while in CMR, after running ManualNooter, I also applied update-Froyo1.2-dalingrin-OC-emmc-090111.zip, and that seemed to work without a hitch)
Then I reinstalled all the other apps I wanted on my Nook,
=== BUT DID NOT YET UPDATE ADOBE FLASH OR AIR ===
Flashed ClockworkMod Recovery, updated a lot of my apps using Market and Amazon Appstore, restored data and other apps from Titanium Backup,
Then I made a full backup of my Nook using CMR. (still booting normal, running fast and clean)
After confirming my Nook was as I wanted it, and that I had a good backup, I did the steps at the top of this post to update Adobe Flash and AIR.
After confirming that was working, and getting another backup on my SD. I then did the updates to ROM Manager and Superuser. It seemed like those updates happened at the same time as the boot loop, so I was cautious. My Nook is still working well without boot loops as of yet.
Results:
Kernel: Stock 1.2
Rooted with: ManualNooter 4.6.16
Additional Mods:
update-Froyo1.2-dalingrin-OC-emmc-090111.zip,
ClockworkMod Recovery 3.2.0.1,
ROM Manager 4.5.0.1, Titanium Backup 4.5.2,
Adobe Flash 11.1, Adobe AIR 3.1 (uninstalled system app, reinstalled via Market, updated via Market)
[Update Zip] CMR zip to update Flash Player and Air
I updated the original post with a link to the zip to fix the FlashPlayer and Air apps. I had intended to post it here, but since I'm new, I can't link externally in a reply.
Please let me know if there are any problems with the zip and I will get it updated. It worked on my Nook.
I updated the zip file 20111020 to fix a problem with the AIR reinstall.
Wow, thank you so much for this! I wish I had known this on the weekend when I was gong crazy trying to figure out why I was getting bootloops over and over. I can't seem to give you thanks though (probably because I never post, just lurk).
So far I haven't done the uninstall/re-install with TB. I am just making sure my Adobe air and Flash don't update, and when Air did I went into Nook Color Tools and uninstalled the update to set it back to what it was originally. That worked but it is a pain if it keeps happening. I will try the TB to uninsall the programs.
I too did a update on ROM Manager and Superuser (and a binary update), and all is still well. No bootloops. I hold my breath though every time my NC gets to the "color" part until the N appears and it all disolves.
thanks for this!!! this was really getting very frustrating.
Well while I would like to report that the flash fix worked, it didn't. It was already on the boot loop so I installed the update with a flashed SD card and nothing. Still stuck in a boot loop. At this point I am just about ready to give up on this device being a fully functional tablet.
Thanks for this information. My nc is currently in a bootloop and won't load CWR. It shuts off before getting to that point (my bootloop is adobe air related). None of the restore to stock via SD card have worked for me. I'm now looking at ADB options, the post you referenced with the fix has some instructions for that. Did you use the ADB or the SD card instructions? I was actually rooted with CM7 before the bootloop.
Thanks,
shy guy1 said:
Well while I would like to report that the flash fix worked, it didn't. It was already on the boot loop so I installed the update with a flashed SD card and nothing. Still stuck in a boot loop. At this point I am just about ready to give up on this device being a fully functional tablet.
Click to expand...
Click to collapse
I realized that my zip was not working to uninstall and reinstall Air properly. Try the updated zip file in the post.
shelly29 said:
Did you use the ADB or the SD card instructions?
Click to expand...
Click to collapse
I used the SD card instructions. Unless you have done something strange to your nook (not sure what), it should always boot from the SD card first, so you should never have problems booting into CMR from an SD card.
If the link in the original post doesn't work for you to get a CMR SD card, try the instructions here:
http://mrm3.net/nook-color-updated-clockwork-recovery-bootable-sd/
If you have a newer Nook, you may need to repartition your Nook's internal memory and use CMR version 3.2.0.1. See details here (this guy just condenses the instructions you can find on various posts on XDA, and tries to keep it up-to-date)
http://mrm3.net/nook-color-how-to-blue-dot-nook-color/
Also note that I updated the zip file in the post to correctly uninstall and reinstall Flash. I re=bootlooped my nook, and after applying the new zip, my nook was working.
Just an update....
I wanted to let U guys know that I had updated Adobe Flash, Air and Super Users and this has worked for me. I also went to double check the versions of both Flash an Air and they are the newest versions!? I still went to uncheck the "Update Automatically" setting in the market for them both just in case for future updates for the time being. Back up and Running! Thanks Again to ALL involved who put contributions to this
This may have worked for me
I tried the updated fix posted here, and the Nook booted properly. Thank you for this fix; I hope it continues to work for me.
I will have to locate the automated back up mentioned here (Titanium), and I will see how this works. I had been leaving my Nook on at all times to avoid the reboot until I turned it off yesterday, forgetting that I did not want to do that.
Awesome post.
So...after all this is said and done and I manage to get a restore image to load and actually boot, now the library doesn't sync and the shop won't load and I get error messages such as " internal error exception executing the command ". It is like the B&N servers are confused. Any ideas about that?
I'm having the boot loop issue and neither the zip nor the 1.2 restore work to get past it. Does anyone have any ideas?
Thanks!!!! You are my new best friend. XD I ended up reflashing several times before I found this post. Followed the instructions and my Nook is happily running Android again without reinstalling (again!). I thank you. My Nook thanks you. And the Angry Birds who would have had to start from scratch thank you.
Thank you! It appears to work now. I've restarted a few times with success!
Took me about an hour to find this thead. I knew there would be an easier fix than starting from scratch. The zip worked on my rooted 1.2
Thanks! Keep up the good work
Thanks! That worked for me.
Stagnation1 said:
I'm having the boot loop issue and neither the zip nor the 1.2 restore work to get past it. Does anyone have any ideas?
Click to expand...
Click to collapse
From my previous searches, it seems the boot loop is usually caused by either an incompatible installation of Adobe flash, or an incompatible kernel (central part of the ROM). Hopefully the OP zip will fix the first, but I'm not sure of another way to fix the second, other than reflashing and rerooting. How far in the reflash/reroot process do you get before it boot loops again?
mastigia said:
So...after all this is said and done and I manage to get a restore image to load and actually boot, now the library doesn't sync and the shop won't load and I get error messages such as " internal error exception executing the command ". It is like the B&N servers are confused. Any ideas about that?
Click to expand...
Click to collapse
Hmm, haven't seen that error. I'm not sure whether its related to the same problem. It sounds like you might need to re-register your nook with B&N. I'm not sure if you can do this without restoring to stock. Not much help, sorry.
I can't post a reply to this ([NC][1.2][1.3] ManualNooter 4.6.16) thread yet - Still new to these forums... I was one of the many in that thread who had installed ManualNooter 4.6.16 on Nook Stock 1.3 only to end up with a boot loop.
Wish I had found this thread last week - would have saved me a lot of headaches!
It's okay though - every boot loop is another opportunity to learn something new.
Thanks much for the easy walkthrough and I hope others find their way here too.
Just saw another new update for Flash & Air .. released yesterday I believe. Has anyone try them yet ? Just don't want to was my time getting into a boot loop again by updating it.
--
I rooted my NC ages ago, first on 1.1 then on 1.2. When I updated to 1.3 (from reverted stock) I used the manual nooter to root it and that's where I've been for awhile.
I finally decided to update to 1.4.1, so I used the erase & deregister function, rebooted it, reregistered, and it's working fine, looking like a stock 1.3 device.
However, I can't get it to update to 1.4.1. First I tried using the manually downloaded update file from B&N's website. It didn't do its thing automagically when I followed the instructions on their site, so I searched various forums and found all sorts of suggestions on what to do.
None of them worked, including redownloading it from the NC itself and moving it to root, and renaming it to the old format "Sideload_update.zip".
Then I tried to just leave it on wifi for a couple hours and see if it would update that way. So far no luck.
Any suggestions on why it's not updating?
Do you have clockwork installed? It will block the update.
Sent from space
koopakid08 said:
Do you have clockwork installed? It will block the update.
Click to expand...
Click to collapse
I did at one time, but I thought I got rid of it with one of the erase/deregisters. If that's not the case, how do I get rid of it?
Philomorph said:
I did at one time, but I thought I got rid of it with one of the erase/deregisters. If that's not the case, how do I get rid of it?
Click to expand...
Click to collapse
Do you see CWR on your screen when you boot into recovery? If you do, you still have it on there and stock updates will not work whether you side load or wait for the OTA update (which has maybe just started now depending on how low your serial number is).
For a full recovery you could create a bootable card with CWR on it and after wiping everything install the stock 1.3 ROM found here: http://www.multiupload.com/3Y5MWE773D
Just read there is a new update for stock Nooks... basically gives more comic-reading options.
I currently have a rooted Nook color and don't really see any real reason to want the latest Nook update, but did want to ask: What would happen if i did update? Would I need to root again afterwards?
I know there's guides on previous versions of Nook, but was wondering if anyone had experience yet w/ the latest update.
I just downloaded it to look at it. It is a complete reflash of your ROM. So my guess is it will undo root. And this from B&N:
The NOOK Color Ver1.4.3 update contains new features and enhancements, including:
• Zoom view in comics and graphic novels
• 2-Page mode in landscape for viewing PagePerfect™ and PDF documents
• Other minor system enhancements
Sent from my Nook Color running ICS and Tapatalk
Thanks for the reply, very helpful!
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
thegraak said:
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
Click to expand...
Click to collapse
I'm in the same state. One of my two Nook Colors auto-updated to 1.4.3 and I'm having the exact same symptoms. The other hasn't yet updated and still works fine. Please share your results
Update:
I used clockworkmod 3.2.0.1 and manualnooter 5.02.19. I reinstalled manualnooter without wiping the Nook and I am back in business on both of them
"back in business on both of them"
Including the google app marketplace? Super cool - the market (and gapps in general) require some things to be in /system to hook into to handshake with the Google servers.
I threw together a super minimal "install su and busybox" rooting tool that lets all of my apps run as I prefer but doesn't include the Market. Nice to know I'll be able to get the Market back as soon as I like.
thegraak said:
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
Click to expand...
Click to collapse
This is why you're supposed to disable OTA updates when you Root a Device. Otherwise your device will update without your permission or foreknowledge. Usually it'll reset everything in System so you'll loose things like Root and Gapps.
Personally I just run CM9 off my 16gb class 10 SDcard. No OTAs to worry about and I get pure Android, all without modifying any of the Nook's Internal Memory.
roustabout said:
"back in business on both of them"
Including the google app marketplace? Super cool - the market (and gapps in general) require some things to be in /system to hook into to handshake with the Google servers.
I threw together a super minimal "install su and busybox" rooting tool that lets all of my apps run as I prefer but doesn't include the Market. Nice to know I'll be able to get the Market back as soon as I like.
Click to expand...
Click to collapse
Yup, everything works fine. I was able to install a new app after the update from the Play store
I've been out of the loop for awhile but need to restore my NC to stock to sell it. What's the easiest way to do it? I'm currently running an older version of ICS from cyanogen. Help?
eyecrispy said:
I've been out of the loop for awhile but need to restore my NC to stock to sell it. What's the easiest way to do it? I'm currently running an older version of ICS from cyanogen. Help?
Click to expand...
Click to collapse
Download the latest update from B&N, download the CWM 3.2.0.1 SD Card Image from here, create a CWM uSD Bootable using Win32 Image Writer, link here, load the downloaded Update file from B&N into the uSD, turn on/reboot NC, clear System, Data, Cache, install the update.
thewaywardgeek013 said:
Download the latest update from B&N, download the CWM 3.2.0.1 SD Card Image from here, create a CWM uSD Bootable using Win32 Image Writer, link here, load the downloaded Update file from B&N into the uSD, turn on/reboot NC, clear System, Data, Cache, install the update.
Click to expand...
Click to collapse
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
DizzyDen said:
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
Click to expand...
Click to collapse
Thanks for correcting me there, thought that it was possible already to install it thru CWM…
bigdweeb said:
Update:
I used clockworkmod 3.2.0.1 and manualnooter 5.02.19. I reinstalled manualnooter without wiping the Nook and I am back in business on both of them
Click to expand...
Click to collapse
I tried this and I cannot access the market. I had a stock unrooted 1.4.2 and then rooted using mn 5.02.19 on CWM 3.2.0.1
My device is rooted but the Market will not download apps. I have followed the guides to clearing the Vending.apk cache and Google Framework Services here: http://forum.xda-developers.com/showthread.php?t=1494901 but Market is not updating and I cannot install apps.
Even after flashing the two files here: http://bookclubs.barnesandnoble.com...tock/m-p/1356004/message-uid/1356004#U1356004 and then re-flashing MN 5.02.19 I just have root.
Currently I have the standard/stock build.prop. I can push files to /system/app and /data/app but that is getting old. And so far no combination of checking or unchecking the NookTools toolbox is letting me install apps via Market.
Any help would be greatly appreciated!
tigger2u said:
I tried this and I cannot access the market. I had a stock unrooted 1.4.2 and then rooted using mn 5.02.19 on CWM 3.2.0.1
My device is rooted but the Market will not download apps. I have followed the guides to clearing the Vending.apk cache and Google Framework Services here: http://forum.xda-developers.com/showthread.php?t=1494901 but Market is not updating and I cannot install apps.
Even after flashing the two files here: http://bookclubs.barnesandnoble.com...tock/m-p/1356004/message-uid/1356004#U1356004 and then re-flashing MN 5.02.19 I just have root.
Currently I have the standard/stock build.prop. I can push files to /system/app and /data/app but that is getting old. And so far no combination of checking or unchecking the NookTools toolbox is letting me install apps via Market.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Under the "Let's get started:' section in the MN 5.2.19 OP thread, perform step #14, let Market update by waiting patiently for some time.
Check comment #216 in that thread from reebz which he resolved a problem like yours.
8GB 1.4.3 Nook Tablet Root?
So I am really new to this whole idea of rooting but I was wondering if anyone has found a reliable way to root the new (1.4.3) nook tablet? PLEASE!
Error message
DizzyDen said:
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
Click to expand...
Click to collapse
I have downloaded the update twice from B&N and copied it to the sd card root. Keep getting a message when I try to install the update, using your instructions, that it can't open the archive (bad).
I am trying your method because I can't get the Nook to update normally. I even followed the default NookColor reset instructions then tried to install the update. The update would never even start. Currently sitting at 1.3.0. So I decided to try this CW mod route. More problems...
This update process is getting so frustrating...... I must assume at this point that the archive is bad again. Tried using both IE and Firefox (heard FF causes problems). The CW boot process worked fine so that's not it.
Not sure what more I can do.
Psyphurr said:
I have downloaded the update twice from B&N and copied it to the sd card root. Keep getting a message when I try to install the update, using your instructions, that it can't open the archive (bad).
I am trying your method because I can't get the Nook to update normally. I even followed the default NookColor reset instructions then tried to install the update. The update would never even start. Currently sitting at 1.3.0. So I decided to try this CW mod route. More problems...
This update process is getting so frustrating...... I must assume at this point that the archive is bad again. Tried using both IE and Firefox (heard FF causes problems). The CW boot process worked fine so that's not it.
Not sure what more I can do.
Click to expand...
Click to collapse
You can't edit the zip with archive software. You must entirely extract it, then edit the files, then rezip and re-sign the zip.
To save you the effort, I made a version of 1.4.3 that is CWM flashable and posted it. See my tips thread linked in my signature. See item A12.
I'm using CM10 internally. Do I need to update to firmware v1.43 or not needed anymore?
carlo.edmon said:
I'm using CM10 internally. Do I need to update to firmware v1.43 or not needed anymore?
Click to expand...
Click to collapse
Not needed.