[Q] Roms wont load/pd15img.zip doesnt work - myTouch 4G Q&A, Help & Troubleshooting

Hello everyone, First off I would like to thank all of those that have posted on this site and contribute to it.
Now to my problem. Let me share a little history of how everything started.
I first rooted my MT4G about a year ago, Tried to use IcedGlacier but it was not loading properly so I used cyanogenmod 6 I believe? I wanted to try IcedGlacier but It still was not loading properly. Then when I tried to restore it would not restore properly. At this point it appeared to be bricked but bootloader still worked but the PD15img file was not found. So after some researched I downloaded it and it restored my phone back to factory condition. Now I want to try other roms again because I'm getting bored of stock and attempting to load different kernels but this is where my issues are beginning.
As you can see in the attached photo that is what the bootloader looks like. I thought it was weird that next to hboot it says "HBOOT-0.85.2007 (PD1510000)".
(I tried to post the image but since I'm a noob I and unable. If you want to see the screen shot of my bootloader just message me.
I was thinking maybe this is a reason as to why now No other rom but the stock one will load. Also what is weird is that when it goes into bootloader it still says PD15img is not found but the phone will start up fine with the stock rom.
The phone remains rooted but No Rom or Kernel will Load and fully install.
When It loads roms it goes to install it shuts off and reboots into stock rom.
I tried to Use the PD15IMG.zip on the SD card to see maybe if it didn't load properly but it will begin to load with the blue bar in the corner but then after it goes all the way up nothing else happens.
I have been trying to look for answers but haven't found any real answers that help me fix my problem.
So if someone can help me I would greatly appreciate it.

The "no PD15IMG.zip" message is supposed to appear. When the bootloader loads, it checks the root of your SD for that file, and if it's not there, you'll get that message. Nothing wrong with that.
Since you're perm-rooted and running the engineering boatloader, you just need to make sure your recovery image is good. If you haven't already, download ROM Manager from the Market and use that to install a fresh copy of ClockworkMod recovery. From there you should be good to flash any ROM you want.

Thanks, I did what you said plus I realized when I was downloading the roms using a Mac and my Mac would unzip the file automatically and trying to compress it back to a zip doesn't work at all. But thanks alot for the help!

If the PD15IMG.zip doesnt work you probably dont have the part7-xxxxxxxxxx.zip file on your sdcard
Sent from my HTC Glacier using XDA Premium App

Related

I've completely forgotten how to flash radios

I'm not sure if you do it via fastboot or via RA, and which one I download. Anyone wanna help me out please?
I tried a few via RA and none of them work. Maybe I'm not downloading it right? I'm not quite sure.
OR maybe it's because I'm on the desire alpha 17 maybe? I have no idea, I've only flashed one radio a very long time ago and that was when I first rooted my phone. Do i have to wipe always or Am i really just mentally retarded.
I got mine in .zip format and flash via the recovery screen. Radios (ok, at least in my understanding) do not effect the rom at all. There is no reason to wipe as it is not related to the rom. I have tried all three today and yet to find one that seems superior where I live
Which one did you download? I ask this because for the latest radio theres all those choices and the one I tried gave me the Android out of the box thing and then booted immediately into recovery. So...help would be wonderful.
This message was deleted by its author
Modaco has it in their forums: http://android.modac...insecure-himem/
The radio update.zip is near the bottom. The update.zip can be flashed from recovery. Just save the file to the sd and flash from recovery. It will reboot to htc screen then have to reboot once more.
This message was deleted by its author
See I did flash that image via recovery and instead I got a android out of box thing. You know how when it starts up You get the little nexus icon with the locK? I didn't even get THAT. It then immediately booted into the recovery.
(Funny story. First time i did it I thought i bricked it, and I literally started crying a little bit. I was freaked until i looked back at it. Embarassing )

Please, help a n00b. I think I broke my Nexus S 4G

Let me first start off by saying that I am on a Mac.
I used these directions to get my phone unlocked and get ClockworkMod Recovery or whatever running on my Nexus S 4G.
I then loaded Cynogen onto my SD card, booted into Clockwork, wiped my phone, then tried to install Cynogen. It failed- it couldn't install boot.img or something.
Now, when I try to boot up my phone, it just shows the Google logo with the unlocked icon below it. It never successfully boots. I can still get into Clockwork Recovery, but below every menu section over the logo, it always shows some error like
Code:
E: failed to something something /cache
Can you guys please, PLEASE instruct me on how to get my phone working normally? I don't need it unlocked, just running the stock OS.
Anyone who can successfully help me do this on a Mac will receive a nice PayPal donation if they wish.
Thank you so much in advance.
And yeah, I know I shouldn't have been attempting this because I am such a n00b.
westinl said:
Let me first start off by saying that I am on a Mac.
I used these directions to get my phone unlocked and get ClockworkMod Recovery or whatever running on my Nexus S 4G.
I then loaded Cynogen onto my SD card, booted into Clockwork, wiped my phone, then tried to install Cynogen. It failed- it couldn't install boot.img or something.
Now, when I try to boot up my phone, it just shows the Google logo with the unlocked icon below it. It never successfully boots. I can still get into Clockwork Recovery, but below every menu section over the logo, it always shows some error like
Code:
E: failed to something something /cache
Can you guys please, PLEASE instruct me on how to get my phone working normally? I don't need it unlocked, just running the stock OS.
Anyone who can successfully help me do this on a Mac will receive a nice PayPal donation if they wish.
Thank you so much in advance.
And yeah, I know I shouldn't have been attempting this because I am such a n00b.
Click to expand...
Click to collapse
What version of CWM did you flash?
Pm me and we will use a chat service (aim, yahoo messenger) and I will walk u through it.
My suggestion of what I would do is this. Find a windows computer somehow. Go to the development section and look for the sticky about rooting the ns4g. Look for the link to flash the d720 back to stock. Download all those files to a flash drive. Take the drive to the windows computer and set things up then flash the phone back to out of the box stock.
Then you can go back to the Mac and do the root and 3024 cwm recovery and rename the sh file that puts stock recovery back in at boot time. After all this you can do what you want but I would suggest staying with the stock experience. This might be extreme to fix this but in my opinion, I wouldn't waste time trying to fix it, especially since you are new to this. It's like computers, yeah you could try to fix it but you could be opening a can of worms. It might take less wasted time putting it back to complete stock instead of f-ing around trying to figure out what happened and how to fix it. You could take hours trying to fix an install of windows that keeps falling on it's face, or you could format and install windows fresh and new in maybe thirty minutes. Which is easier?
CM7 will not work at the moment because it still uses 2.3.3, go find instructions for a 2.3.4 Nandroid. if you want though,i heard that supeaosp works on a ns4g.
Sent from my Nexus S using XDA App
westinl said:
Let me first start off by saying that I am on a Mac.
I used these directions to get my phone unlocked and get ClockworkMod Recovery or whatever running on my Nexus S 4G.
I then loaded Cynogen onto my SD card, booted into Clockwork, wiped my phone, then tried to install Cynogen. It failed- it couldn't install boot.img or something.
Now, when I try to boot up my phone, it just shows the Google logo with the unlocked icon below it. It never successfully boots. I can still get into Clockwork Recovery, but below every menu section over the logo, it always shows some error like
Code:
E: failed to something something /cache
Can you guys please, PLEASE instruct me on how to get my phone working normally? I don't need it unlocked, just running the stock OS.
Anyone who can successfully help me do this on a Mac will receive a nice PayPal donation if they wish.
Thank you so much in advance.
And yeah, I know I shouldn't have been attempting this because I am such a n00b.
Click to expand...
Click to collapse
Dude, you can't flash regular Nexus S ROMs on the Nexus S 4G.
Reflash the latest clockwork recovery.
Use fastboot flash recovery recovery.img
then...
Go to recovery, mount the USB storage, and put this zip on the usb storage:ROM
Go to recovery and flash that zip
here's the recovery that works. cwm and stock. How many times is this going to happen with new people and this phone in this forum section before a new subsection is made? We are going to be putting out a lot of these unnecessary fires with people making first time mistakes until something is done so as to not confuse them. Some don't realize that there are different versions of the same phone that aren't necessarily compatible with each other.
The way things are set up now, it isn't making this problem go away. I think that a different method should be tried if the current one isn't working too well. I'm flogging a dead horse now......
I'm looking to root my new NS4G as well -- and do it right the first time. On a Mac as well.
If the similarly-suited OP had issues I'm a bit more skeptical about my effort.
A separate forum might be necessary so people with the D720 hardware don't have near-brick experiences.
Sent from my PC36100 using XDA Premium App
soooo....did the op ever get it running again? i wonder if anyone ever took up on his paypal offer

[Q] A sort of newbie query but...

Hi there,
I had been umming and arring about rooting and installing a new ROM one of my familys HTC Heroes for some time now and finally after reading lots of "How to's" on lots of different forums I decided to take the plunge and give it a go using the guide on here.
Both my wifes phone and my sons phone are sim unlocked Orange HTC Heros running 2.1-Update 1.
Rooting it was easy. One press of a button and I was there. Its pretty much worked OK and I have sucessfully made three backups of the wifes Hero.
My main query and this is the bit I have not really been able to find much info about despite spending a day trawling through the forums looking for similar queries is this:
Having flashed my recovery image file, the first time I reboot I can get into the recovery mode just fine. From here I can make a backup of the current ROM after which the Hero reboots and goes back into the OS as it should.
If I then shut it down and reboot using the HOME key + POWER option It does not go into the recovery mode. I get the screen with an image of the phone next to a red triangle with an exclamation mark in it.
Using the advice from various forums whilst searching for further advice / hints I have left the phone for up to half an hour but it stays on this screen. The only way to get it out of this screen it to pull the battery.
If I then boot up the phone and reflash the recovery image, I can then get into the recovery mode once again but for ONE BOOT ONLY.
I have tried AmonRA Revcovery v1.7.01. and also the Clockwork Recovery 2.5.0.7 images and both produce the same results. I have tried flashing the images via ROM Manager and also via Android Terminal Emulator
My question is this: Do I have to flash the recovery image EVERY time I want to open the recovery mode or is there something I have missed? At present I have held back from installing a new ROM in case I go past a point of no return where I brick the phone. Neither my wife or son would be too pleased despite my son wanting a better ROM on his.
Apologies for writing "War and Peace" but I wanted to make sure I had covered all I could and hope this is a) not a query already posted elswhere which I have missed b)posted in the right place. Apologies to any forum mods if its not.
Regards
Rhinestone.
hmm look on the unlokr.com or something like that. They use some simple passes and it's the way i did it. the on;y difference is that my phone wasn't blocked on a carrier...
1.there is a program that roots the hero's rom
2.after that i recommend installing clockwork recovery mode (it doesn't need signed zips)
3.if you don't feel safe doing this, i recommend to stop... I know that the 2.1 rom is boring but you can end up with a bricked phone after this...
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
TheReverend210 said:
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
Click to expand...
Click to collapse
This, just flash a custom ROM and it will stick.
Hello,
Problem might be with rooting, possible it has not been rooted completely or anything messed up. You can try this for rooting.
http://unrevoked.com/
If you are sure its rooted completely, then check out Superuser apps, if its there, and you are rooted, if not then download terminal emulator and type "su" command, if its doesnt display any error then its rooted.
Other then this,
problem might be with the recovery images you are flashing, download droid explorer its a window application, its has an option of flashing recovery with one click, simply choose recovery image & flash it, clockmod recovery or amonr any of this you can get in xda.

Recovery / Bootloader

Ok, i realize i have a different phone from this thread but it is close and my problems closely reflect the issues ive seen with the Galaxy S.
A little background. Im no perfect i know what im doing when it comes to rooting. I have an HTC Tbolt and rooted many of those, an older touch pro 2, and this is first time doing a samsung. I am getting the hang of ODIN (i wish everyone would just use this program instead of bouncing back and forth between heimdall and ODIn but whatever) Im liking ODIN cause it works well. I was successful at flashing a new rom into this Samsung phone. 95% of it worked, wifi i think didnt but everything else worked. While trying to fix the phones wifi somehow i have stopped the phone from booting into CMW recovery unless forced or booting into a rom. I can get into CMW but i must hold down the Vol Down button to get there, otherwise a clean basic boot takes me to the stock android system recovery screen and will not boot a rom.
I have something backwards or out of order. I am just trying to get the rom to identify the installed CMW and the installed ROM through CMW but it wont do it.
Any help would be appreciated, i dont want my GF to find out i jacked her phone lol
Which phone do you have? SGS? I can just talk about SGS+ but I guess its similiar.
Try to install CWM with Odin, normally it should replace the stock recovery (haven't heard of both running at once).
Once you have installed CWM you can install your custom ROM with CWM (look at the install instructions).
If you want to install stock ROM with Odin it will replace your CWM with stock Recovery.
Post the link of the thread/recovery you want to flash.
annqx said:
Which phone do you have? SGS? I can just talk about SGS+ but I guess its similiar.
Try to install CWM with Odin, normally it should replace the stock recovery (haven't heard of both running at once).
Once you have installed CWM you can install your custom ROM with CWM (look at the install instructions).
If you want to install stock ROM with Odin it will replace your CWM with stock Recovery.
Post the link of the thread/recovery you want to flash.
Click to expand...
Click to collapse
Its a stratosphere. Im using the root and / or stock files in the root method. I use ODIN to flash the StratCWMRecovery.tar.md5 and if i tick "reboot" then it reboots into CWM i install a rom or stock rom and it finishes. I reboot the phone and it instantly goes back to android system recovery. If you like ill make a short video to give you an idea of whats going on.
I will note that im close to making a jig but its not 100% bricked obviously. 3 button method still works (and unecessary at this point since all the phone does is go straight into the stock bootloader) and then after i install CWM i can force it in to CWM but it wont actualy boot into it.
From a programing standpoint i feel the pointers or partitions are incorrect. Its like booting a computer that has a hard drive with windows installed however getting the bios to tell it to boot from the hard drive isnt working. THats the easiest way to explain this.
One thing i want to note is the only errors i am getting are when i try to partition the SD card from CWM. I get an error saying sdparted is not found.
I am not getting a full understanding of how the root system works on this phone.
Again any help is appreciated.
Made a short video. Its uploading now. http://www.youtube.com/watch?v=tFZ5Adm5AdQ
So whatever i did i was able to fix. I think me being a very visual person and normally having access to all files i need or could use in a situation is always nice. Here, i didnt but i found them. Here's the link. Its obviously for stratosphere but i took about 10 minutes and let ODIN install all these files and it worked.
original posting but the link doesnt work for download
http://rootzwiki.com/topic/11183-eh2-full-factory-odin-restore/
where i downloaded it
http://www.fileswap.com/dl/t4D235pUTO/SCH-I405.EH2_rel.md5.html
Again this is for stratosphere. Since it really helped me return to stock and allow me to re root in about 15 minutes this thread should be moved but there is no stratosphere area

[Q] Phone has no recovery and other issues.

First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie

Categories

Resources