Some of you guys tried to install on CM dt a2sd 7 .1 RC1
Sent with my Wildfire s-off thank Alpharevx using XDA Premium App
I never needed a A2SD script on CM7, because I could move any app to the SD out of the box.
I did try, phone bootlooping afther applying the script (a2sd chashesd), needed nand restore
Are you asking how to use dt apps2sd on cm7. If yes,
First partition the sdcard to 3 partitions (ext , swap, fat). Ext will be for applications and its value depends on your usage. Swap can be 0 mb, 32 mb, or any little value. And the remaining will be fat.
Then install cm7. Then install the dt apps2sd script from recovery. That's all. And while restarting the phone, it may reboot couple of times which is normal and during which the installed apps will be transferred to SD-ext. And when memory card is removed from phone , a reboot may occur and u can see a clean cm7 rom then since almost all apps will be present on the memory card Ext partition. Ok that's about process.
And if you face any issues like bootlooping or any other issues, it must be with partitioning related. Sometimes partitioning with recovery gives successful apps2sd. And sometimes it won't. In any case you can use "gparted live cd" to partition sdcard. Be careful in messing up with your computer partitions when using gparted.
Good luck....
Sent from my HTC Wildfire using XDA App
I tryd it to got it installed, checked the terminal got lots of errors. My phone became unstable so i reflashed the rom and deleted the patition.
I wish there is a full newbie guide to install this WITH screenshots.
Sent from my HTC Wildfire using XDA Premium App
I think the hardest part of this is creating the partitions correctly. If once it is created everything will be fine.
I too had the bootlooping issues while trying it for first time. At first I thought it was due to newer beta dt apps2sd script. But when I used gparted to create partitions, it worked fine for me even with newer beta. Ofcourse I had few unsuccessful attempts with gparted too in creating partitions.
Edit: forgot to say that I used dt apps2sd with cm7 nightly #115.
Sent from my HTC Wildfire using XDA App
just to say:
I am using now ruymanica rom based on cm7,it has built in dt....just used command in terminal emulator and everything went fine
Thank you all for the immediate participation in the discussion.
Sent with my Wildfire s-off thank Alpharevx using XDA Premium App
Related
I recently flashed my Epic to run Baked Snack 1.6 and just for grins decided to set it up for a2sd support. It seems to be working properly as Titanium Backup shows an a2sd partition. I also used Android Terminal to run some commands like "diskspace", "install", and "check" that shows it is running like TB shows.
I see the apps being stored at system/sd which I suppose is the Ext2 partition I made in CWM recovery mode. Can I insert apps directly into this file directory and have everything stay copasetic or do they have to install normally?
More than likley you will not get help here with that issue due to the maker of the rom is no longer here and his stuff is not supported.
Using baked snack is incidental to the thread. I need some info fom those using a2sd on eclair units.
When I was using a2sd on bs 1.6 created the partition, used terminal to initiate a2sd and it even moved over my old apps. Everything I installd defaulted to sd. The way I knew was that my phone memory was rediculously high, like 400mb, because on that rom dalvik cache is on sd as well.
Sent from my SPH-D700 using XDA App
What ever I try to do, app 2SD just won't work. I've tried installing an update. Zip but that did not helped..
What could I do?
Sent from my X8 using XDA App
SimonXiDk said:
What ever I try to do, app 2SD just won't work. I've tried installing an update. Zip but that did not helped..
What could I do?
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Same problem, try to move to sd card, Moving Error, tried with 2 partitions on Floyo, tried in Gingerbread and...Nothing..
try Link2SD
download from android market, u must created second partitions with Fat32 format in Sd card, and need standart ROM 2.1 rooted
just run apps, reboot.. but u must move apps manually by open Link2SD >click >created link
I found app2sd didn't work for me. So I used link2sd in stead. Had to create a partition on SD card first there is a thread that I used to do it. I now have 400mb on the SD card just for apps.
But you need to have full root to do it.
Sent from my E15i using XDA App
It did'n work for me, too.
But I tried, and figured out how to install it.
First, you need to partition your SD-card. Second, do the method, that they wrote, but when you open the adb shell, first write "su", and accept it on your phone. Then you can begin to run the script. This way, I could install it.
I've tried several times before, without the "su" command in the beginning, it doesn't work without it. Now, I'm happy, because it's working and I have some free space on my device
if ext2 doesn't work, try use ext3 partition for apps2sd
vice versa
Just give it a try again.
Tut: http://m.youtube.com/index?desktop_uri=/&gl=US#/watch?xl=xl_blazer&v=8G94qerkSX4
Ps: link is from youtube mobile as I sent it from my phone.
Guys be sure you have 2.1.1.A.0.6, otherwise it won't work cous of kernel dependencies.
SimonXiDk said:
What ever I try to do, app 2SD just won't work. I've tried installing an update. Zip but that did not helped..
What could I do?
Sent from my X8 using XDA App
Click to expand...
Click to collapse
okay first tell us what ROM are you using, what app2sd type that u try to use (native or with ext partition), and what steps have you took?
ps: if u're using racht's 2.2.1 ROM (that i think you do), app2sd with ext partition works perfect. just use app2sd.sh with moved dalvik-cache that someone posted in development section.
For me a clean installation and following the given steps carefully works. Floyo 0.15 has native app2sd and it works for sure
I use Link2SD. It is a pain in the a$$ when you update or move to SDcard but it works.
Steps to get it work: (For Windows and Noobs users only)
1. Download the Link2SD app from store
2. Download and install this program (it will make the partitions of your card) from here (it's free)
3. Connect your phone as a USB (mount your card)
4. Follow this video (it's not mine), but do not leave space for a "Linux Swap" partition (unless you want it)
5. Reboot your phone.
Tested and it works!
P.S.: I think that even if i had an EXT3 partition the Link2SD worked when i ckecked the EXT2 partition (in it's set up). Can someone confirm that?
Hey guys how do you move ALL apps and data to your sd card so when I flash roms (theres a new update everyday it gets too hard) I dont lose my progress in apps and I dont have to reinstall they are already there, is it possible to do this?
Also can you set sd card as default so new apps you install automatically go there.
It would be nice if I could partition just like 1 gb of my SD card just for apps!
Ive searched a few threads and stuff trying to gather information but none of them really helped alot so sorry if this has been answered!
What ROM are you running?
Daz555 said:
What ROM are you running?
Click to expand...
Click to collapse
RCmix3D at the moment, thinking about flashing Honey sense hd for a while!
I just want to make a partition of about 700mb onto the SD and move ALL my apps to it so I dont lose my progress and I dont have to worry about them when I flash roms!
thanks in advance!
Hello,
I'm unsure of any batch command to send all existing apps to SD so you may have to go to Settings> Applications> Manage Apps and move each one individually.
To change default app install location, use the following command either through ADB or in a terminal emulator:
pm setInstallLocation 2 //for SD card
pm setInstallLocation 0 //for phone internal memory
You'll find after setting the install location to SD, you'll notice that more apps can be moved to the SD card manually instead of just being greyed-out. However, be careful though - personally, I wouldn't move the following to SD since they've affected performance:
- apps which use a widget on your home screen (music players, aggregators)
- apps which explicitly interact with the system (e.g. task managers, autokiller, autostarts)
- Google apps
Hope this helps.
Backup all user apps in batch mode using titanium backup pro. Saves to sdcard backup folder.
Or
Partition sdcard to ext3 or 4, 0 swap, and use a a2sd+ patch (if your ROM supports it). Backup data on the fat32 partition first, as it may get wiped when the partition is split to make the ext partition. All user apps and associated dalvik will be moved to the ext partition on boot. Just make sure the ext partition is not wiped / formatted prior to flashing ROM. Use pc software such as gparted or mini partition tool free. Been a few phones bricked using the wrong cwm version to partition.
But, if were me, just use Titanium Backup Pro.
Sent from my Desire HD using XDA Premium App
UpInTheAir said:
Backup all user apps in batch mode using titanium backup pro. Saves to sdcard backup folder.
Or
Partition sdcard to ext3 or 4, 0 swap, and use a a2sd+ patch (if your ROM supports it). Backup data on the fat32 partition first, as it may get wiped when the partition is split to make the ext partition. All user apps and associated dalvik will be moved to the ext partition on boot. Just make sure the ext partition is not wiped / formatted prior to flashing ROM. Use pc software such as gparted or mini partition tool free. Been a few phones bricked using the wrong cwm version to partition.
But, if were me, just use Titanium Backup Pro.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Gparted wouldnt find my phone when plugged in when I tried.
Also when you just move to SD through settings>application, it doesnt move the whole app only half and when you install a new rom they arnt there
Gparted is Linux, mini partition tool for Windows.
A2sd+ moves apps to ext partition, not fat32 partition your referring to. A2sd or apps to SD move only to fat32 partition.
There's the difference between a2sd+ & a2sd.
Sent from my Desire HD using XDA Premium App
UpInTheAir said:
Gparted is Linux, mini partition tool for Windows.
A2sd+ moves apps to ext partition, not fat32 partition your referring to. A2sd or apps to SD move only to fat32 partition.
There's the difference between a2sd+ & a2sd.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
So to move the apps COMPLETELY on to the SD so they are there when you install a new rom and stuff, I partition my sd card in Ext 3/4 and then use a2sd+ to move them over right?
I'm on LeeDrOiD, and don't bother with the patch anymore.
But the method I used was, setup ext partition, flash ROM followed immediately by the a2sd+ patch for 1gb ext, then reboot. First boot will take a while.
Is useful if you stick to the same ROM, ...... as long as you don't wipe the ext partition before each update / build flash, or the ROM doesn't have a inbuilt script that wipes the ext. If that happened, you'd lose the apps and their dalvik cache, although the dalvik should be wiped anyway.
Edit: important, Forgot to mention, move all apps to "internal" memory prior. A2sd+ will take care of it on boot / flash and move all to ext. Any other app DL, just move to internal, and it'll be moved auto next boot.
Sent from my Desire HD using XDA Premium App
Delete, finger trouble.
Sent from my Desire HD using XDA Premium App
UpInTheAir said:
I'm on LeeDrOiD, and don't bother with the patch anymore.
But the method I used was, setup ext partition, flash ROM followed immediately by the a2sd+ patch for 1gb ext, then reboot. First boot will take a while.
Is useful if you stick to the same ROM, ...... as long as you don't wipe the ext partition before each update / build flash, or the ROM doesn't have a inbuilt script that wipes the ext. If that happened, you'd lose the apps and their dalvik cache, although the dalvik should be wiped anyway.
Edit: important, Forgot to mention, move all apps to "internal" memory prior. A2sd+ will take care of it on boot / flash and move all to ext. Any other app DL, just move to internal, and it'll be moved auto next boot.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
I got the partition set up and I installed the patch and the reboot took ages but how do I know if there on SD, I dont think they are because when I click on the app some still say move to sd?
Repsys7 said:
I got the partition set up and I installed the patch and the reboot took ages but how do I know if there on SD, I dont think they are because when I click on the app some still say move to sd?
Click to expand...
Click to collapse
Open titanium backup, the first page that opens "overview", look down the bottom, will say something like;
Rom
Internal
Sdcard
A2sd+
Sent from my Desire HD using XDA Premium App
ok it says sd card (A2sd) 575mb 60.4 free, so I think that means the apps are on there, so if I wipe my phone the apps will stay right?
It will always say move to SD if installed in any other place. But the SD it refers to is the fat32 partition, not your ext. A2sd+ will take care of it and move all new apps to ext on boot, as long as you install to internal memory first.
After some market updates of apps installed to ext , you may have to move to internal and reboot to ensure they're on the ext
Sent from my Desire HD using XDA Premium App
Repsys7 said:
ok it says sd card (A2sd) 575mb 60.4 free, so I think that means the apps are on there, so if I wipe my phone the apps will stay right?
Click to expand...
Click to collapse
Maybe a slightly bigger partition would have been better.
The apps should stay, as long as the ext is not wiped / formatted.
If apps not recognised in market, clear market cache, boot cwm, clear dalvik, boot, use titanium backup pro to restore market link if needed.
Sent from my Desire HD using XDA Premium App
UpInTheAir said:
Maybe a slightly bigger partition would have been better.
The apps should stay, as long as the ext is not wiped / formatted.
If apps not recognised in market, clear market cache, boot cwm, clear dalvik, boot, use titanium backup pro to restore market link if needed.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
I did the biggest one possible in Rom manager
Alright thanks for all your help mate!
Maybe your version, I have not done it since 1gb using cwm 2.5.1.3. But some newer versions had bricked phones. ROM manager is just an interface for cwm, so that's why its best to do it through pc. Should recognise the card through a sdcard adaptor
Sent from my Desire HD using XDA Premium App
UpInTheAir said:
Maybe your version, I have not done it since 1gb using cwm 2.5.1.3. But some newer versions had bricked phones. ROM manager is just an interface for cwm, so that's why its best to do it through pc. Should recognise the card through a sdcard adaptor
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Yeah but I use windows, and I'm having problems using Gparted live (it just wont let me partition my sd card) and using virtualbox I cant find my device in Ubuntu :S
Mini partition tool , free version for windows, maybe you missed it in an earlier post.
Sent from my Desire HD using XDA Premium App
UpInTheAir said:
Mini partition tool , free version for windows, maybe you missed it in an earlier post.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Ahh stupid me haha, il try it out, thanks
I have a rooted HTC Wildfire 2.2 with a new 8GB microSD Class 4. I'd like to correctly partition my SDCard so that I can install all applications on SDCard and not Phone Memory.
1- What I need is to help me setting up perfect sizes for SWAP & Ext3 (Perfect matches HTC Wildfire and 8 GB Card).
2- Can I install the stock 2.2.1 ROM over the SDCard?
3- Will all Apps got installed on SDCard after partitioning instead of Phone Memory leaving it empty?
Thank you
nice post i would like to know too!
Try rommanager, chose partition your sd,(instal old clockwork mod like 2.xx, becoz new ones make ext4, which is not compatable with some roms,)choose the greatest avilable size for ext and swap(it may be enough, if u r not app greedy, i had done so, so far i have 50+app installed), reboot-partition-done, the best trouble free way!
Sent from my HTC Wildfire using XDA App
showlyshah said:
Try rommanager, chose partition your sd,(instal old clockwork mod like 2.xx, becoz new ones make ext4, which is not compatable with some roms,)choose the greatest avilable size for ext and swap(it may be enough, if u r not app greedy, i had done so, so far i have 50+app installed), reboot-partition-done, the best trouble free way!
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Thanks for your reply but I don't want to end up my device because some people reported issues with partitioning part of internal phone memory due to some ROM Manager Partition Manager errors. I'll use a PC client to partition the card.
Rom manager works fine. I've done it a few times. The people having problems probably shouldn't have bought an android phone...... besides if something goes wrong odds are it won't just redo the partition again.
And make sure you backup your SD card before partitioning it.
Sent from my HTC Wildfire using xda premium
Use recovery (= rom manager) to partition first. If that gives any issues then use "gparted live cd" to partition sdcard. U need to download gparted_live_cd_ISOimage and burn it to a cd. Then using pc u need to boot from live cd to partition sdcard. Here be careful not to format ur pc hard drive.
The partitioning sizes I recommend are 512MB ext , 32MB swap and remaining fat. If that is not sufficient u can choose 1024 MB, 64MB.
If u r using gparted then first create extended partition as fat corresponding to its memory. Then create ext and swap. At last format all those partitions.
Sent from my Blade using XDA App
Dude, i have done it several times, so far got no issues, and it is the simplest way.
Sent from my HTC Wildfire using XDA App
omg wow
so i have conflicting information from this thread and this one http://forum.xda-developers.com/showthread.php?p=19927720#post19927720 on whether or not i am able to create an sdext partition on a factory rom, which i have come to the conclusion that you may be able to, but would you be able to put that partition to use and have apps installed and read from there. please be more specific, i have an LG Opt T running 2.3.3 btw
thanks for any input
I used gParted. It's free. You can find it by fecking googling download and burn to a CD. Then boot it on your PC. Linux will show up. Open gParted from desktop and size your ext and format.
I made 1 GB ext4 and 64 MB Swap. 1 GB is too much for ext since I can't use more than 100 MB. 512 is ok. I read somewhere that Swap isn't used anymore but 64 MB isn't a thing in 8000.
It doesn't matter if its ext3 or 4 since you can flash DT's A2SD to any ROM.
The apps you moved to SD before are not in ext partition. They will stay in FAT partition. To move them to ext, simply move them to phone (after DT's A2SD phone means ext part.
Sent from my HTC Wildfire while dividing infinity by zero
Hey man,
I had the same problem a while ago:
http://forum.xda-developers.com/showthread.php?t=1253270&page=2
In the second to last post I finally managed to get it to work. (Just to be clear, I used the darktremor script, but not the app, for the app is use S2E and to visualise my usage i use "freespace", but work like a charm ! )
Hope it helps
dudes i am planning to switch to #199 cm7.
the plans are...
1) fresh flash #199 with 2.6.32 buzz kernal.
2) dta2sd beta 3,jewz ram script, sd speed increase script(4068) .
3) custom mtd partition with 170mb system and 30 mb cache.
4) data and app to sd ext4.
5) 8gb class 4 sd partitioned to 1gb ext4, 32mb swap, rest with fat32 with a large allocation value.
6) lot of paid app of course.
i need your suggestions ....
thanks in advance.
Sent from my HTC Wildfire using XDA App
Do the mtd partition as you install 199, I got problems when a2sd was already installed, my mtd settings are 140 10, 10mb works fine for cache just make sure you have 06mountdl in your init.d folder otherwise you wont be able to download anything from the market above 10mb in size, if it isn't in the init.d folder you should find it in the cm zip.
Sent from my HTC Wildfire using xda premium
Scratch0805 said:
Do the mtd partition as you install 199, I got problems when a2sd was already installed, my mtd settings are 140 10, 10mb works fine for cache just make sure you have 06mountdl in your init.d folder otherwise you wont be able to download anything from the market above 10mb in size, if it isn't in the init.d folder you should find it in the cm zip.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
dude i haven't heared of init.d folder. pls explain. well i surely plan to give 25 mb cache. if so do i need to care about init.d folder?
" just make sure you have 06mountdl in your init.d folder" dude i realy dont understand this.
" if it isn't in the init.d folder you should find it in the cm zip." and this too i dnt understand.
so i am a newbee to custom mtd partition. hence i need help about this. how should i need to use the script? i plan to flash it soon after i reboot to #199. only after that i will install my apps.and also gapps. so do i need to take nandroid backup? as i have backups of my app using titanium backup. so i will install every thing later.
Sent from my HTC Wildfire using XDA App
Put the files needed on your sd card and write your settings in the txt file.
Run the first part of the mtd partition (wipe system/data/cache and install the first zip, bravo recovery or something like that, reboot your recovery from the advanced setting.
After doing the first step install your fresh copy of cm7 (instead of the nandroid backup) without wiping anything, then run the bravo boot zip and let it boot before installing anything else.
Files from the market, when first downloaded go to your /cache folder which if set to only 10mb would mean you can only download files below 10mb in size, the 06mountdl script deals with this by diverting the downloads elsewhere /data partition I think (not sure), the scripts are found in /system/etc/init.d after installing cyanogen if your cache size is small just check that folder (with root explorer) as a few times I have had to extract 06mountdl from the cm7 zip because it hasn't installed.
All that happens if 06mountdl isn't there is, when you go to the market you'll get an annoying message saying you don't have space left if the filesize of the app is larger than your cache.
Hope that made sense its 7am here.
Sent from my HTC Wildfire using xda premium
thanks for your help dude. i will check it out. also do i need to flash dta2sd b4 or after i install apps. i had done it b4 i install apps in my current rom#177. do you have any suggestions?
Sent from my HTC Wildfire using XDA App
Not entirely sure, I know some people say before but its never harmed me doing it after, you may aswell just run it straightaway though after your first reboot. Just in case.
I only use beta 3 as I had problems with beta 4, I don't think there's any noticeable changes between them tbh.
Sent from my HTC Wildfire using xda premium
k. i will check it. and will post my experience. thank you dude. see you soon.
Sent from my HTC Wildfire using XDA App
So i ended up in cm7#203. Stable. Fast, like it a lot.
The sad thing is i can't make custom mtd. Every time i ended in a non booting cm7 boot screen. Actually i had to flash froyo 2.2.1 ruu 2 times. Rooted, installed cwm. 2 times. Coz i had done like u said. Flashed custom mtd recovery with mtdpartmap.txt file containing 160 25. Then installed new rom with a reboot of recovery only.also flashed bravo boot. All as you said. Stuck in splash screen. So again tried to flash new rom and kernel from recovery. Still the same after flashing. So again ruu flash. Install custom cwm v5.xxx.partitioned SD. This time the SD got corrupted. So removed custom cwm and put original cwm using fastboot flash. Then partitioned with out errors. And installed cm7#203 from cwm, SD speed increase script,Jews ram script,2.6.35 kernal, latest radio, mediaprofile patch, gapps for 2.3.5 Andy. Rebooted after dalvic wipe. Itz running perfect. Installed s2e app . Moved app,private app, data, to ext.
I think that s2e is more efficient than dta2sd. It is faster, move almost every thing to ext. And internal memory consumption is quite low after app installations(when compared to dta2sd). Also booting and shut down are faster.
I will be watching for future errors. Thank you.
Sent from my HTC Wildfire using XDA App