Hey guys I been using apps like SCLPF 1-62,Pcm keyboard, and vibrating keypad. These programs never stay running. If i turn my phone off I have to run each one all over again. Please help me out.
I'm using a Att Tilt.
bambu456 said:
Hey guys I been using apps like SCLPF 1-62,Pcm keyboard, and vibrating keypad. These programs never stay running. If i turn my phone off I have to run each one all over again. Please help me out.
I'm using a Att Tilt.
Click to expand...
Click to collapse
well, thats very easy:
put a link of the .exe files in \windows\startup
this will start all the links when your phone starts up
Thanks that is simple, but heres anothe dumb question how do u create a link. just a beginner
You can easily create a link from a context menu of the Total Commander for PPC (freeware app, one of the best file managers for PPC).
Or just copy paste the already available links from Windows\Start Menu to Windows\Startup
Hello everyone,
Got a simple but very important problem. I can't close apps by x button even though I have installed HTC Task Manager v.2+. I think its probably due to QuickMenu who also has the same options and I used them. Any registry edits for this. Is it possible to have this feature enabled through registry permanently.
Thanks everyone !
PS . Is it ok to have 8-10 word suggestions in SIP(Keyboard) instead of 4.
first this is probably in the wrong section second maybe just use the one of the functions...either task manager or quickmenu...cuz it mite conflict each other
First, thanks for the reply.
Second, i apologize if its in the wrong section.
Third, can QuickMenu be removed cause there is no cab installation. Plz advise.
Fourth, i wanted to know the reg edits for this purpose.
Finally, I have stopped using QuickMenu(for now) and HTC TaskManager is enabled and yet the same result. Yes i did reset after disabling QuickMenu and enabling TaskManager.
Thanks again for reply and awaiting further guidance.
This is not a program, but just registry settings to use the built-in biotouch.exe to call Manila Control in order to toggle between M2D and Today.
Notes:
must install Manila Control to \Windows\ before the attached .cab
the cube no longer works after installing this, but the corresponding processes (i.e. QuickDial.exe, MediaHubMini.exe and APLauncher.exe.exe) may still in your memory unless you replace the .exe by dummy programs or kill the processes.
must backup the original [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] before installing the attached cube, otherwise won't be able to restore the cube.
toggling M2D/Today using softkeys as shown in the demo video is NOT set by the attached .cab
Demo video:
http://hk.youtube.com/watch?v=3fGNWYI2fkA
download:
for Nike, Polaris and Vogue, pls refer to attachments of this post.
for Elf, pls see the one provided by dark.angel at post #13
Good idea, I'll try on HD when I'll have it, I hope monday.
Thank you
great idea. Although I've still yet to find a use for a second today screen. lol
is there going to be a version of this for the vogue? it seems neat but im not ballsy enough to install something not meant for my device quite yet.
lazyboy0172 said:
is there going to be a version of this for the vogue? it seems neat but im not ballsy enough to install something not meant for my device quite yet.
Click to expand...
Click to collapse
Vogue uses different registry settings. please try the newly added cap in post #1. pls be prepared for bug-fixing time because i can't test it on my own. for safe, pls do a backup, especially the [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] registry key, before installing.
good luck.
davideuck said:
Good idea, I'll try on HD when I'll have it, I hope monday.
Thank you
Click to expand...
Click to collapse
surely none of the 3 uploaded version would fit the vga devices.
if you want a try, i guess the Polaris version can be a good start. pls be prepare for the pull-up screen being in 1/4 size.
pls do let me know the testing result and see whether i can find a way to fix it. if it doesn't work at all, pls kindly let me know the following registry key values on your device:
[HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch]
"App1"
"Cube1"
"Path11"
thanks for your interest.
thx!! its very fine!
to pp18 with a simple question..
PP18!!
please let me know before i make some serious mistake with my HTC touch 3G jade..Is it working on it as well?Or your program is connected only to the above mentioned phones?I needed exactly the program tweeks u wrote.It should be fantastic,but I have this conserne..
Please let me know if I can tweek my 3G jade without fear..?!
by the way,thank you for the nice app you wrote..HELIOS
Great find,. thanks for sharing,,.
pp18 said:
This is not a program, but just registry settings to use the built-in biotouch.exe to call Manila Control in order to toggle between M2D and Today.
Notes:
must install Manila Control to \Windows\ before the attached .cab
the cube no longer works after installing this, but the corresponding processes (i.e. QuickDial.exe, MediaHubMini.exe and APLauncher.exe.exe) may still in your memory unless you replace the .exe by dummy programs or kill the processes.
must backup the original [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] before installing the attached cube, otherwise won't be able to restore the cube.
toggling M2D/Today using softkeys as shown in the demo video is NOT set by the attached .cab
Demo video:
http://hk.youtube.com/watch?v=3fGNWYI2fkA
Click to expand...
Click to collapse
Is it possible to use this on HTC Touch (Elf)?
And also I would like to change running program from ManilaControl to any other, for example CommManager.
I've installed reg settings from the Vogue cab (is it right?), and copied original Biotouch.exe and dummy APLauncher.exe, MediaHubMini.exe and QuickDial.exe to the windows dir, created shortcut for biotouch.exe in the windows/startup folder and Soft-reseted my device.
Now when I make touch gesture the screen appears into black and nothing happens.
Is it possible using registry settings to bind touch gesture to run any exe (for example, commmanager.exe)?
Thank you for answers!
heliosismagic said:
PP18!!
please let me know before i make some serious mistake with my HTC touch 3G jade..Is it working on it as well?Or your program is connected only to the above mentioned phones?I needed exactly the program tweeks u wrote.It should be fantastic,but I have this conserne..
Please let me know if I can tweek my 3G jade without fear..?!
by the way,thank you for the nice app you wrote..HELIOS
Click to expand...
Click to collapse
sorry i really can't answer your question because i haven't played around with a Jade before and I don't have any friends who have bought one. the main prob is, i don't know the version no. of biotouch shipped with Jade.
if you really want a try,
do a full backup (so that you can hard reset + restore in worst case)
backup/export the [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch] registry subtree
try the Polaris version
good luck
dark.angel said:
Is it possible to use this on HTC Touch (Elf)?
And also I would like to change running program from ManilaControl to any other, for example CommManager.
I've installed reg settings from the Vogue cab (is it right?), and copied original Biotouch.exe and dummy APLauncher.exe, MediaHubMini.exe and QuickDial.exe to the windows dir, created shortcut for biotouch.exe in the windows/startup folder and Soft-reseted my device.
Click to expand...
Click to collapse
Elf's built-in biotouch version is different from Vogue's. pls find the Vogue's version, which should appear in those threads about installing 4-sided cube on Elf
Now when I make touch gesture the screen appears into black and nothing happens.
Is it possible using registry settings to bind touch gesture to run any exe (for example, commmanager.exe)?
Thank you for answers!
Click to expand...
Click to collapse
basically yes. the trick is in the "App1" reg key. if the app being called has a visible window and you want to use the swipe-down gesture to hide it (like the original cube), the first part of the key value must be the right class name. otherwise, like the case for Manila Control, simply use a non-exist class name.
I've duplicated my commanager.exe and mui files and renamed them to biotouch.exe and biotouch.exe.mui, so now after the touch gesture commanager is running. It works!
Here is the test cab file, i haven't tested it on a clean device, but it seems to be work. If it doesn't working, post here please.
added a link to the Elf's version by dark.angel to post #1
snoopy
Hey, Love the snoopy. Is there anyway to take it off however? I't just doesnt go well with my today screen?
KH2GR said:
Hey, Love the snoopy. Is there anyway to take it off however? I't just doesnt go well with my today screen?
Click to expand...
Click to collapse
though not totally take if off, but editing the registry keys as below can minimize its appearance:
[HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch]
"TotalBMP"=dword:00000001
"Cube1"=hex:07,01,01,01,01,01,01,01,0A,C8,C9,CA,CB ,01,01,01,01,01,01
"UpFPS"=dword:0000FFFF
if you want to further cut down the size of the snoopy image that may appear for a short time, you can also change the below key:
(for Nike and Polaris) "Path1"="mc01.brn"
(for Vogue) "Path1"="\Windows\mc01.brn"
Is it possible to call manilla from any program with this gesture fix?
I mean the way I call and close cube by just scrolling tumb up or down.
Hey, I know everyone seems to like the HTC Task Manager 2.x alot, but I don't. I've gotten used to using a program called vBar and I like it a lot better because it allows you to click next to where the X or 'ok' would be and change programs. With HTC's version you seem to have to navigate back to the today screen to accomplish this.
So:
1) How do you disable HTC Task Manager 2.1 from starting up with the device (also it would be helpful if anyone knows of an easy way or program to look at all of the start up programs on the device)
2) OR if someone can help me see how to make HTC Task Manager act like vBar.
Thanks,
Joshua
P.S. Sorry if this is a re-post, I searched first.
P.S.S. I think Fuze topics go with Diamond, if not please feel free to move it for me.
hey guys. i was just on my xperia and found this handango app in the programs sections. so with curiosity i decdied to run it. well ir run half way and then it stopped.
now on the first panel (xperia panel?) theres the handango inhand icon on the lower right. is that normal?
i tried clicking on it and nothing happens...i try going back to programs and click on the handango inhand app again but now nothing happens.
and finally i went under the task manager to see if the handango is running but theres nothing there.
can sum1 plz explain the use of this program or how to get rid of it?!
THanks alot!! any feedback would be greatly appreciated.
just uninstall it. i knew straight away when i got my X1 that the handango thing would only gives me problem.
dont forget to deletethe handango thing in the startup thing after u uninstall it
ok. where do i go to unstal this program?
sry if im asking all this really basic questions but i just got my x1 a couple of days ago.
thanks alot for your help
Can't
If you are running the latest R2AA_10 you cannot "uninstall" Handango...per se because it has been embedded into the ROM.
You can however remove the program link from your start menu folder with a file explorer like resco and remove any startup links to it.
alias_neo said:
If you are running the latest R2AA_10 you cannot "uninstall" Handango...per se because it has been embedded into the ROM.
You can however remove the program link from your start menu folder with a file explorer like resco and remove any startup links to it.
Click to expand...
Click to collapse
im currently on R1AA017. wat version is that??
so since im in a different version..how can in uninstall it?