Database Users

camera problems

Hello everyone,
I want to first say that I am new to these boards and am glad I have found them.
My problem is everytime I try to use my camera it tells me I dont have enough memory and to stop all running progs.
I stop them all and the problem still presist. It seems to work after I reboot the phone but returns to that after I start using some prog.
Is there a way to fix this or should I just reboot everytime?
Any help is appriciated.
Thanks.

lazorpointer said:
Hello everyone,
I want to first say that I am new to these boards and am glad I have found them.
My problem is everytime I try to use my camera it tells me I dont have enough memory and to stop all running progs.
I stop them all and the problem still presist. It seems to work after I reboot the phone but returns to that after I start using some prog.
Is there a way to fix this or should I just reboot everytime?
Any help is appriciated.
Thanks.
Click to expand...
Click to collapse
try flashing one of the ROMS they have here.. the reason why ur getting that is because ur running low on memory (ram). and the stock Rom the phone comes with just plain doesnt do the job. or try looking for the hibernate.cab maybe that can free up memory so u wont have to reboot all the time

You can also try the PagePool to reduce the size from the Stock 12 MB to your choice of 4 or 6.

I installed the pagepool but I cant get it to run the backup.bat file.
Error "There is no application associated with "backup". Run the application first, then open this file from within the application".
Am I missing something?

lazorpointer said:
I installed the pagepool but I cant get it to run the backup.bat file.
Error "There is no application associated with "backup". Run the application first, then open this file from within the application".
Am I missing something?
Click to expand...
Click to collapse
You run it from your PC while the phone is synced with your PC. Not from the phone.

I actually tried that first but it didn't do anything but I'll give it another try.
Maybe I did something wrong.

lazorpointer said:
I actually tried that first but it didn't do anything but I'll give it another try.
Maybe I did something wrong.
Click to expand...
Click to collapse
Read my walkthrough on the Herald mobile 6 forum on how to flash.
And read this for a list of ROMs.

hi, I'm a noob with a question about my HTC tilt 2. Help please!

I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.

drehustler said:
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
Click to expand...
Click to collapse
Yeah it sounds like you had CF 3.5 on there before but somehow it didn't stay after the hard reset (which indicates it was installed sometime after the phone was first purchased).
The file you downloaded is to install it from your PC, not the phone. Put the cab file I attached here on your phone, run that, and it should resolve the issue

Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.

run this from your computer. http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en

drehustler said:
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
Click to expand...
Click to collapse
Hmmm no, never heard of it, and basic searching turns up nothing but lists of odd HTTP error codes, that one included. My guess would be an issue with your browser on your PC, but I really couldn't say for sure.
You can also just run the file Rhodium500 linked to above, it's the same .msi file you put on your phone in the first place but couldn't get to run from there...it's an automated installer that just handles everything from your PC instead of you putting the cab on the phone manually.

thanks alot guys, still have no luck and since my phone is under warranty, i'm gonna get a new one. I got 2 htc tilt 2's and only mine is doing this? i'll be back.

dude getting a new touchpro2 wont help... i dont think... like the guy who posted the attachment said, just install it and it should work. if u cant download it use your friend's computer or the library

Dude I had the same problem and if you wait a few mins Ill find it in the microsoft website so you can try downloading from there. Just run it on your computer, then connect your phone with active sync. Go to programs> More> Add/Remove programs and click on the little box there. (I am not sure if the menu goes like this, im actually sure that it doesnt, but for some reason my phone wont connect the WMDM right now so i cant tell u) anyway dont return the phone just because of that cuz the new one might have a problem thats actually harder to fix
I dont remember where I got it from but Ill try to find the original place where I found it.
Heres the file
Microsoft Website
You can download it straight from their website. Its free and it doesnt hurt

thanks, just tried it and had no luck?? i can't even return my phone until the 12th so i'm still trying to figure it out.

hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.

drehustler said:
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
Click to expand...
Click to collapse
Just a hint; it seems that either resetting the device or ActiveSync seems to solve a lot of problems sometimes. Had the same that my device didn't want to accept new Exchange-settings I made on my PC. After resetting both, it worked flawlessly.

[Q] Cannot open file.......PROBLEM.

Hi,
Im having a huge amount of problems with trying out a new version of android,
The install failed so i removed that version of Android off my SD card,but now i get that error message(Cannot open file...) every time i try to run "CLRCAD" or "haret",....worked fine before,
ive tried...
-many different versions of Android (all very nice before this error by the way)
-deleting every possible data file on the sd card
-rebooting the Phone many times,
Any ideas?
Thanks,

Maybe a hard reset of your phone is the solution..

Worked perfectly
I feel embarrassed but grateful
Thanks,

chain622 said:
Worked perfectly
I feel embarrassed but grateful
Thanks,
Click to expand...
Click to collapse
No problem mate

[Q] Win 7 activated - but can't download

Hi guys
I have searched the forum but cannot find anyone with a similar problem.
I have activated my Win 7 but still cannot download apps.
I get the following message when trying to install an app
"Can't get this information at the moment. Check again in a little while"
Any suggestions?

what th f***
now ive got the same prob.
ive already installed some apps but now i get the same message

i tried to download from zune on the pc it says it cant be downloadet becaus of an temporary server problem
i daont think that somthing on my phon is wrong its a server prob by zune

Me too, I wonder if genuine WP7 owners are getting this problem...

have u already downloaded something before?

Yes, and it worked before.

and u dont changed anything?!?

Nothing at all, I only tried because I saw this thread.

yes me to
its definitely a server prob dont worry...be happy

Good to hear. Just activated my HD2 and I was afraid I did something wrong.

Well seeing as it says it can't get the information after it says it was verifying, it does look a bit suspicious :/

for me its working again
i hope for u too

How did you solve this problem?
I'm getting that error message as well.

Diaeko said:
for me its working again
i hope for u too
Click to expand...
Click to collapse
yeah I am having the same problem, received my activation code today. I go on Zune and it lets me install ot, but I get it will install soon message and then it never does. Anyone, I am in the US and on t-mobile.

i dont do anythig it was an server problem and now everything is working

I have the same problem after activation,too...
The wp7 ist correctly running, only the marketplace doesn't run...
I did an hard reset and the same happens...
When i want to install the programs with zune, zune say, that it is installed, but i can't find the program on my phone...
I have vodafone in germany...

Just downloaded and istalled the IMDb app. Downloaded and installed fine, but won't run. Loads up for about 4-5 seconds and then phone goes back to WP7 menu screen. Any ideas???

If you have JUST activated and it is saying this
have you applied the registry key to identify the device as a HD 7 ?(unless you have a ROM with this as standard)

There is coming the following message:
Access to the registry key "HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg is restricted.
What could I do?

For you guys having problems with Marketplace, just be sure you made de HD7 tweak (in Settings-About your device must appear as HTC HD7, not Leo70). After you enter the 25 digit code in Marketplace, get the Live ID.xap file (available on the forum) and edit the CustClear.provxml file in it with your code. Then deploy the LiveID.xap to device.
I'm not having any Problems with Marketplace apps.

Battery tool revoked by M$

Just synced with Zune (HD2 WP7 Yuki v1 7712) and tried to start the battery tool but got a message saying it has been revoked by Microsoft please uninstall, anyone else had anything like this??

try HTC_BATTERY_TOOL.xap
thare are 2 just search
the first one i use with v1 didnt work on v2
but this one did!

jackrabbit72380 said:
try HTC_BATTERY_TOOL.xap
thare are 2 just search
the first one i use with v1 didnt work on v2
but this one did!
Click to expand...
Click to collapse
was working fine until after I synced today, will try to re install and see what happens

just tried touchexplorer, sh camera and I get the same message, Has M$ put a block on sideloaded apps??

ohdaesu said:
just tried touchexplorer, sh camera and I get the same message, Has M$ put a block on sideloaded apps??
Click to expand...
Click to collapse
i never even got a chance to get touch explorer to work but i remember wile one of the updates was installing when updateing to
HD2_Updatable_XBmod_Yuki_v2_native
i went from thare all the way to the end of the tutorial
now running OSverison 7.10772068
and im haveing all sorts of troubles i didnt have when i was running
HD2_Updatable_XBmod_Yuki_v1
i remember zune saying something about blocking 3ed party certificets! or soemthing like that
i dont even know what you meen when you says sideloading apps?
im so noob to wp7
im curently stuck with out a working phone it wont recognse my sim card!
im so mad to i havent ben able to receve calls for 2 days!
that and applications wont update
and every pic i take has a green tent to it
a bunch of other stuped errors!
can someone point me to stock tmoble us stock win moble 6.5
i need to get my phone working atleast untill we can fix thease bugs!
i have only had my htc hd2 for a week! and iv spent most of that time hear on xda trying to make the best of HD2_Updatable_XBmod_Yuki_v2_native

Both programs work OK on my phone! I'm on 7720 and have no issues after syncing with ZUNE!

this error comes if your wp7 isnt unlocked anymore.
you must chevron unlock it again then you can start the apps without an error

@ jackrabbit72380
No offence meant but..
why
do
you
write
like
this?

imotz said:
this error comes if your wp7 isnt unlocked anymore.
you must chevron unlock it again then you can start the apps without an error
Click to expand...
Click to collapse
I don't seem to be able to get chevron working, can anyone give me some direction please?