Related
hello all, i need help again this time.
let's get to the point.
this morning, i tried to charge my G1 because the battery has yellow color.
when i charged the phone, after around 5 minutes, suddenly my G1 restart itself and then after the "G1" logo, the screen go all black, sometimes not all black but there's a little glitch (white-green-purple-all little colors.)
the phone got heated on the bottom part everytime i power-on it, even just on battery (not charged).
i tried "Camera + Power", it's only getting to that red-blue-green-white screen that shows :
"DREA100 PVT 32B
HBOOT - 0.95.0000
CPLD-4
Radio-2.22.23.02
Sep 2 2008
Serial0"
Click to expand...
Click to collapse
and it stops there for AGES . won't do anything.
i tried "Home + Power", i tried to hold down that two buttons for 25 second more, but it keeps normal boot, shows G1 logo, and then black screen again.
i tried "Menu + Power", it just the same as "Home + Power"
my G1 has never been rooted, it's all original, i haven't done any system upgrading-downgrading things.
the charger is the original one, original from htc
the battery is new, i've just changed it one month ago.
that's all the informations that i can give.
so, anyone can help me solving this problem?
if its not rooted or anything than that means its HTC's fault not yours. and since you cant access the recovery menu to flash a new rom or recover a nandroid backup, it sounds like you're up ****s creek with a turd for a paddle.... unless somebody has developed a way of flashing without recovery. in other words; get a new phone or send it in to t-mobile.
Get an SD card reader an put a DREIMG.nbh on your sdcard to downgrade to RC29 (push power+camera, select confirm), then wait for the OTA to push you to DMD64. You will loose all your data but at least your phone will work.
Alternatively, after downgrading to RC29 you can exploit the bluetooth bug to gain root access, and after that install CM5.0.8 and be twice as happy with you chunky old G1.
mejorguille said:
Get an SD card reader an put a DREIMG.nbh on your sdcard to downgrade to RC29 (push power+camera, select confirm), then wait for the OTA to push you to DMD64. You will loose all your data but at least your phone will work.
Alternatively, after downgrading to RC29 you can exploit the bluetooth bug to gain root access, and after that install CM5.0.8 and be twice as happy with you chunky old G1.
Click to expand...
Click to collapse
okay, i think i'll try this one.
just another information, i've tried another combination of buttons, such as hold down together "Call + Menu + Power" and then slide quickly to Home button, but it's giving no effect too
dioadi said:
okay, i think i'll try this one.
just another information, i've tried another combination of buttons, such as hold down together "Call + Menu + Power" and then slide quickly to Home button, but it's giving no effect too
Click to expand...
Click to collapse
Call+Menu+Power is for a reboot while the phone is on lol. Only other way is "blue light mode" which is trackball and power, but I don't feel like explaining it to you=p.
mejorguille said:
Call+Menu+Power is for a reboot while the phone is on lol. Only other way is "blue light mode" which is trackball and power, but I don't feel like explaining it to you=p.
Click to expand...
Click to collapse
ohh, to be honest, i've tried the Call + TrackBall + Power too, yes the LED light up blue, and then nothing happened while the LED still light blue.
dioadi said:
ohh, to be honest, i've tried the Call + TrackBall + Power too, yes the LED light up blue, and then nothing happened while the LED still light blue.
Click to expand...
Click to collapse
Nothing is supposed to happen unless you have a JTAG afapter. And why the hell post in two different forums?
mejorguille said:
Nothing is supposed to happen unless you have a JTAG afapter. And why the hell post in two different forums?
Click to expand...
Click to collapse
wow, i guess JTAG Adapted would be another long explanation, huh?
yes i made two posts. You know that sometimes, some people prefer to go to just specific thread/subforum, ignoring the other thread/subforum.
but who know if that people can help me?
hey, i'm back.
after days to days downloading DREAIMG.nbh again and again, finally i got the right DREAIMG.nbh, not corrupted one.
and yes, i successfully update, all stuff are signed "OK" , and then i press the action (trackball) button, restart the phone, and guess what? it turns back to the beginning problem, still. "G1" logo, and then turn to whole black screen.
so, now what?
am i bricked?
or is it hardware problem? (remember i said that everytime i turn on the phone, the down part, near sim card, is always getting heated)
the only screen that can be accessed is that rainbow screen and the update screen (Camera + Power).
dioadi said:
hey, i'm back.
after days to days downloading DREAIMG.nbh again and again, finally i got the right DREAIMG.nbh, not corrupted one.
and yes, i successfully update, all stuff are signed "OK" , and then i press the action (trackball) button, restart the phone, and guess what? it turns back to the beginning problem, still. "G1" logo, and then turn to whole black screen.
so, now what?
am i bricked?
or is it hardware problem? (remember i said that everytime i turn on the phone, the down part, near sim card, is always getting heated)
the only screen that can be accessed is that rainbow screen and the update screen (Camera + Power).
Click to expand...
Click to collapse
im pretty sure the heat issue comes from the processor, not the sim card. mine does that too. its nothing to worry about as long as you havent overclocked your device (mine is overclocked and works great aside from gettin warm during heavy usage.) what happens when you plug the phone into usb? does it show the SD card or can you get into the android sdk? its a long shot as i doubt you can get into debug mode without having a uncorrupted os, but i guess its worth a shot.
BuddhaTeh1337 said:
im pretty sure the heat issue comes from the processor, not the sim card. mine does that too. its nothing to worry about as long as you havent overclocked your device (mine is overclocked and works great aside from gettin warm during heavy usage.) what happens when you plug the phone into usb? does it show the SD card or can you get into the android sdk? its a long shot as i doubt you can get into debug mode without having a uncorrupted os, but i guess its worth a shot.
Click to expand...
Click to collapse
the phone can't get into the home screen, it's always going blank after Tmobile-G1 logo.
so when i plug the phone into usb, it's just charging, no SD card recognizing on my computer.
And how can i get into Android SDK ?
Google is your best friend.
Sent from my HTC Dream using XDA App
Unable to turn it on. totally bricked
So... Are you unable to turn it on due to no fingers?
Lol yea what happened?
Well, we need a bit more info.
Sent from my SGH-T959 using XDA App
1. have you tried "power button" ?
2. have you charged the phone ?
on a bright side, you are the 1st one !
Maybe your battery is loose? Not to mention that bricking a
phone is usually due to screwing up a software flash. So, is brick really the right word?
Sent from my SGH-T959 using XDA App
kolyan said:
1. have you tried "power button" ?
2. have you charged the phone ?
on a bright side, you are the 1st one !
Click to expand...
Click to collapse
LOL!!
Try holding down the volume down button as you turn the phone on...see if that does anything.
Only time I'd allow the "First" comment to be used in a thread.
Im guessing CW Recovery...
Thank you guys
I think it's bricked, and unrecoverable.
After several flashing, It suddenly turned off then never woke up again. Any effort so far is hopeless
bl4ckdr4g00n said:
Thank you guys
I think it's bricked, and unrecoverable.
After several flashing, It suddenly turned off then never woke up again. Any effort so far is hopeless
Click to expand...
Click to collapse
What were you flashing? Give more info and maybe ppl would/could help you!
All~G1 said:
What were you flashing? Give more info and maybe ppl would/could help you!
Click to expand...
Click to collapse
I tried with captivate stock firmware, i9000 international firmware, then I flash back to vibrant stock firmware.
After had things done with Odin, my phone restarted, and it was the last time I saw my baby working as a smart phone.
Did you try to reboot the phone into recovery or download mode?
DAKIDD236 said:
Did you try to reboot the phone into recovery or download mode?
Click to expand...
Click to collapse
How can I do that when I can't even turn it on?
bl4ckdr4g00n said:
How can I do that when I can't even turn it on?
Click to expand...
Click to collapse
Have you tried plugging it into your charger? does the battery/charging screen come on?
bl4ckdr4g00n said:
How can I do that when I can't even turn it on?
Click to expand...
Click to collapse
try this Koush posted this in his thread.. hope it works
Koush said:
If you are stuck on the phone to PC screen, you are NOT bricked. During development, I ended up getting into this state a couple times myself. You can still get into download mode in the same fashion.
Connect your phone to USB so you get the phone->PC screen. Press and hold both volume up/down. Then press and also hold Home. Then start pressing and holding power for 2 seconds. After 2 seconds, let go of power. Continue holding volume up, volume down, and home, until you get into download mode.
Click to expand...
Click to collapse
All~G1 said:
Have you tried plugging it into your charger? does the battery/charging screen come on?
Click to expand...
Click to collapse
no, a completely blank screen.
no icon, no GUI, no nothing (
Yeah, weird...I just flashed back to US firmware and now my phone is totally unresponsive to everything. Keep in mind I've flashed back and forth several times...even once thought my phone was bricked because the power button wouldn't even turn the screen on. But after holding the correct buttons it finally booted into download mode. I was even using my phone earlier just fine, and having it run quadrant test of 1700, but as soon as I flashed back to 100% stock US firmware, my phone now no longer boots. Go figure lol.
Though this time I think it has bit the dust for real, lol. So be weary of flashing back to US firmware if you are flashing a lot of different other firmwares. Cuz I think something happens and the key combinations get deleted so it refuses to boot into any mode.
DAKIDD236 said:
try this Koush posted this in his thread.. hope it works
Click to expand...
Click to collapse
I"m at the phone to pc screen..but the Home button is not a "button" it's a touch sensitive button on my vibrant and it won't go into download mode...
I got here because i flashed the custom kernel to put the market and data on a ext4 partition...and it reversed my volume buttons and reversed the routing of sound..headphone speaker..that stuff....so i couldn't hear anything...so when i went to reflash stock t-mobile firmware it told me not to unplug for like hours..it wasn't doing anything.....i took the battery out and now i'm stuck at phone to pc...i think i might just use the warranty..seeing as u can't do a think with it...atleast i can't that is..i feel like a moron...
the forum said to work on com7 but com4 was showing up in odin...i couldn't get it to go on com7 so i thought it should still work....
fykick said:
even once thought my phone was bricked because the power button wouldn't even turn the screen on. But after holding the correct buttons it finally booted into download mode.
Click to expand...
Click to collapse
what was your combination?
I hold volume up and down..then hold home with those..then power for 2 seconds..let go and nothing...it doesn't recognize i'm holding the home because it's a software based button..the home key that is..and with no software...no button...so i'm afraid this screen means bricked...adb reboot download won't work either...i'm gunna get it exchanged in the morning..under buyers remorse..
So the power button on my nexus one completely stopped working. I shut off the device and could not turn it back on. After popping battery in an out a few times I finally somehow, got it to turn on. Now i'm going to need to make sure it stays on all the time.
Now my question. To me this looks like a manufacturers hardware defect, so would the unlocked bootloader and me being the second owner of the device make any sort of difference here?
Any other way to turn the device on when its completely shut off?
Update #1: 7/30/10
Called HTC, then i got transferred to Nexus one department then back to HTC. Described my problem to everyone. They were nice to say they will get that taken care of. Told him i got the phone as a gift, updated my info, and I'm doing the swap option. He also said that any "physical" damage to the device might be charged, aka broken screen or w.e, regular wear and tear is fine. Mentioned nothing at all about software. I'm flashing back to stock either way. Will update as time goes
Same power button problem. Haven't checked into warranty with bootloader being unlocked, but if you plug up the usb cord, wait for the little led light to come on, take out the battery and put it back in as soon as the light goes off, then it will power the phone back on.
Ah i guess that's how i got lucky with turning it on then.
Hmm, i might give them a call tomorrow and see what they say.
Let us know what they say if you don't mind.
No worries with HTC. I was a second owner of my first N1. I traded my Iphone 3GS for it. Unlocked the bootloader first 10 minutes i had the thing. Few weeks later. I saw dust under the screen. Called up HTC. Gave them IMEI. Told them my girl got it for me for my birthday. They gave me an address.(original owners). I said nope and gave them mine. Went through the process. I had them put a hold on my credit card for $525. They sent a replacement phone next day. I packed mine up and sent it back. I had to do this twice because the replacement after 3 weeks started getting dust again and i could tell the power button wasnt really working well also.
Now im a second owner of another N1. I traded my tmobile N1 for a ATT N1. woot.
You can also root the phone and put trackball wake on it....also, when the phone is off completely, the trackball WILL boot it - tested this myself today.
MaximReapage said:
You can also root the phone and put trackball wake on it....also, when the phone is off completely, the trackball WILL boot it - tested this myself today.
Click to expand...
Click to collapse
Honestly when my phone was off I tried booting by pressing trackball and holding, just pressing and nothing. How did you do it? is there a specific process? I already have trackball wake selected thankfully before this even happened.
Another question is, how in the hell would i get into recovery or any of those functions now?
Coderedpl said:
Honestly when my phone was off I tried booting by pressing trackball and holding, just pressing and nothing. How did you do it? is there a specific process? I already have trackball wake selected thankfully before this even happened.
Another question is, how in the hell would i get into recovery or any of those functions now?
Click to expand...
Click to collapse
You download quick boot and user that to get into recovery or bootloader.
I ended up receiving the new nexus one, but i sold it already so yea
Hi,
I've a nexus one with a broken on-off button, so now I can't boot my phone at all.
there is a rom to boot with trackball or any hardware button ?
thx
Read the thread
thebluest said:
Hi,
I've a nexus one with a broken on-off button, so now I can't boot my phone at all.
there is a rom to boot with trackball or any hardware button ?
thx
Click to expand...
Click to collapse
Read the Thread and there is a suggestion on how to turn it on
Awesome guides! No doubt about that. I'm not a complete noob but I am new to the HD2 and I feel stupid bc I can't get past the first step I am frustrated cuz I have been looking all over for ways to check SPL my trio screen that everyone talks about is not coming up. Idk what to do. I've done the volume down with power button and also tried pressing the reset button in the back just to see if it works. I boot into Windows to make sure the volume down works and it does.
I have the tmobile version Leo 1024. Any suggestions.
Sent from my HTC Amaze 4G using xda premium
fcpelayo said:
Awesome guides! No doubt about that. I'm not a complete noob but I am new to the HD2 and I feel stupid bc I can't get past the first step I am frustrated cuz I have been looking all over for ways to check SPL my trio screen that everyone talks about is not coming up. Idk what to do. I've done the volume down with power button and also tried pressing the reset button in the back just to see if it works. I boot into Windows to make sure the volume down works and it does.
I have the tmobile version Leo 1024. Any suggestions.
Sent from my HTC Amaze 4G using xda premium
Click to expand...
Click to collapse
Pull battery, press volume down and hold, push power and hold both. Tri color screen should be there.
Sent from my HD2 using xda premium
Like everyone says. Volume down + end key.
Hold the volume down until the tri-color screen shows up.
I know you've said that.. just make sure you continue to hold volume down
Maybe that will help.
thank you guys but idk why it is not working but i finally managed to get it to bootloader by trying to install hspl3 it automatically sent me to the bootloader screen. After it said "we hacked it" i rebooted and tried to see if it would work with the typical hardware button
voldwn + power button and then let go and it still does not work.? :/
ps . i let go of power button but kept holding the voldwn and still did not work.
fcpelayo said:
thank you guys but idk why it is not working but i finally managed to get it to bootloader by trying to install hspl3 it automatically sent me to the bootloader screen. After it said "we hacked it" i rebooted and tried to see if it would work with the typical hardware button
voldwn + power button and then let go and it still does not work.? :/
ps . i let go of power button but kept holding the voldwn and still did not work.
Click to expand...
Click to collapse
You are completely turning off your phone and then doing this to power it up right?
Sent from my HD2 using xda premium
Yes and so I started following your guide to install clk since I know that I at least now have hspl3 installed and in the part where you task29 I followed instructions successfully flashed. Everything is going well until you say to reboot into boot loader mode by removing battery and voldwn + power. I try it hoping it would finally work and it doesn't.
Make story short my phone is stuck at the "stick together" screen. I tried getting into boot loader mode by running the hspl install program but bc is stuck on the screen comp is not able to recognize phone. Am I bricked?
Btw I pm you Kylew
Sent from my HTC Amaze 4G using xda premium
Nice, real slick move,, you can't get into bootloader, yet you still decide to go ahead and wipe the OS, so now you have a non booting phone and no access to bootloader.
That's a handsome if totally useless lump of glass and plastic you have there!
JTAG, or sell for spares. (Well, after trying everything you can think of, but all I can think of is freezer trick, but its a loooooong shot. )
samsamuel said:
Nice, real slick move,, you can't get into bootloader, yet you still decide to go ahead and wipe the OS, so now you have a non booting phone and no access to bootloader.
That's a handsome if totally useless lump of glass and plastic you have there!
JTAG, or sell for spares. (Well, after trying everything you can think of, but all I can think of is freezer trick, but its a loooooong shot. )
Click to expand...
Click to collapse
what is jtag and whats the freezer trick? is there any other way to get into bootloader mode maybe with sd?
Im willing to open the phone and remove or unplug a strip to completely erase any stored data and hope that it boots into bootloader?
SOLVED!! hope this helps someone else
i got it to work. My god there are soo many ppl with this phone soo many threads and post not sure if thats a good or bad thing lol anyways out of all the searching I found this guy to have had the same as me and he solved it. It was impossible for me to ever i mean EVER boot in to the trio color screen or bootloader what ever its called using the hardware buttons even tho the hardware buttons do work. I was able to get into bootloader when comp and phone sync and I used the hspl3 program to boot the phone when it was fully on the win mo stock.
Anyways I just followed this :
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
I opened up my hd2 (unscrew and removed the back panel) and disconnected the connector flex rigid board (A board) of the hardware keypad from the mainboard….and pushed the battery in and pressed reset (sometime u need to plugin the usb cable to wall charged/pc to wake up the phone) and held volume down key and hopped for some miracle.
Viola saw the tricolor screen after eternity – since the back panel (not backcover) was open I help the battery to the pins and didn’t even move my fingers …run the stock rom installation and held the battery tight in place and waited to get the rom completed…the moment its 100% relaxed my fingers and reconnected the flexboard connector, re-assembled my phone and everything was back to normal.
I also used these pages for reference on parts:
http://www.ifixit.com/pdf/ifixit/guide_5919_en.pdf
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
ps. no need to take the whole phone apart. I believe you are disconecting the AP FPC from main board which is connected to your hardware buttons if I am correct.
Edit: I want to give credit to kylew1212 for walking me through the rest of the installation of my android.
Interesting, good job.
i have a lot of sympathy for his viewson peace
Hello i have recently tried to return my phone from cyanogenmod into the stock rom using this thread: "https://forum.xda-developers.com/moto-x-style/general/guide-return-to-stock-relock-bootloader-t3489110" and my phone got stuck in the process while making the command "fastboot flash bootloader bootloader.img". And now my device is stuck on boot loop showing the cyanogenmod loading screen.
Anyway now i found a way to get to stock but for that i need to get my device into fastboot. THE PROBLEM IS that my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
p.s I have used to think that my fastboot was deleted but on an other thread i have been told that as long as i see the cyanogenmod loading screen of the OS that means i have a boot-loader.
Please help!
I want to get into Fastboot on my Moto Pure.
Thanks a lot
Eden.
Power down 1st
Try volume down & power key together. That will get you into fastboot directly.
Oops just seen that, my bad, I wont respond anymore.
Sent from my Portable
PassatSport15 said:
Power down 1st
Try volume down & power key together. That will get you into fastboot directly.
Oops just seen that, my bad, I wont respond anymore.
Sent from my Portable
Click to expand...
Click to collapse
Haha, as said. can't power off.
Np thanks for responding!
Anyone got an idea?
u cant poweroff does that means your phone is continuously bootlooping or its just booting but takes a hell lotta time to boot up?
Sagar_1401 said:
u cant poweroff does that means your phone is continuously bootlooping or its just booting but takes a hell lotta time to boot up?
Click to expand...
Click to collapse
I think @edenah is saying it just gets stuck at the loading screen. If the battery discharges all the way and the device is plugged in, the battery symbol shows and after the charger is unplugged, the battery charging doesn't go away until the battery dies again or the power button is pressed (which leaves us right back to where we started)
edenah said:
Hello i have recently tried to return my phone from cyanogenmod into the stock rom using this thread: "https://forum.xda-developers.com/moto-x-style/general/guide-return-to-stock-relock-bootloader-t3489110" and my phone got stuck in the process while making the command "fastboot flash bootloader bootloader.img". And now my device is stuck on boot loop showing the cyanogenmod loading screen.
Anyway now i found a way to get to stock but for that i need to get my device into fastboot. THE PROBLEM IS that my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
Click to expand...
Click to collapse
Try this:
Hold power button for 10-20 sek, when screen will turn off hold only vol-(at bootloop screen).
You should flash stock without "oem" commands.
Find how to update bootloader.
aybarrap1 said:
I think @edenah is saying it just gets stuck at the loading screen. If the battery discharges all the way and the device is plugged in, the battery symbol shows and after the charger is unplugged, the battery charging doesn't go away until the battery dies again or the power button is pressed (which leaves us right back to where we started)
Click to expand...
Click to collapse
Yes thats exactly what i mean.
dzidexx said:
Try this:
Hold power button for 10-20 sek, when screen will turn off hold only vol-(at bootloop screen).
You should flash stock without "oem" commands.
Find how to update bootloader.
Click to expand...
Click to collapse
tried this, but the device still goes into the cyanogenmod loading screen.
its soft brick but can't be fixed (just thinking any method but no idea man)
get your phone to moto service centre and they can only fix it (or maybe not) caus this is worst case happening to you
if any pro dev read this thread he might be able to answer but badluck (nobody gives a ....)
btw when you connect your phone to pc does it shows unknown device or it just charge the phone?
Sagar_1401 said:
its soft brick but can't be fixed (just thinking any method but no idea man)
get your phone to moto service centre and they can only fix it (or maybe not) caus this is worst case happening to you
if any pro dev read this thread he might be able to answer but badluck (nobody gives a ....)
btw when you connect your phone to pc does it shows unknown device or it just charge the phone?
Click to expand...
Click to collapse
:/
It recognizes it as portable usb device.
And well. I have bought the device in the us but i live outside of the US. so its bit problematic to return it now. Some help could do the trick!
I found SP flash tool and i believe it would do the trick. But i need to get the scatter loading file of the moto pure, but i can't find it anywhere, maybe anyone got the idea how to get that?
edenah said:
:/
It recognizes it as portable usb device.
And well. I have bought the device in the us but i live outside of the US. so its bit problematic to return it now. Some help could do the trick!
I found SP flash tool and i believe it would do the trick. But i need to get the scatter loading file of the moto pure, but i can't find it anywhere, maybe anyone got the idea how to get that?
Click to expand...
Click to collapse
We haven't been able to get the QLoad files for most Moto devices, at least not for the last 2-3 years... Sorry.
Well i have found a way to get the device charged while the screen is off!
If i connect it to my computer while pressing the power button and the vol down button and keep pressing it, the device stays turned off!
Now i'm trying to play with it, to turn the bootloader. so far the classical power and vol combo doesn't work.
edenah said:
Well i have found a way to get the device charged while the screen is off!
If i connect it to my computer while pressing the power button and the vol down button and keep pressing it, the device stays turned off!
Now i'm trying to play with it, to turn the bootloader. so far the classical power and vol combo doesn't work.
Click to expand...
Click to collapse
I am stuck. No button combination works. I suspect that the device isn't really off but the display is just closed. As even to open up the device takes a reallly long press on the power button.
if it got interrupted while flashing bootloader, you're pretty much not going to be able to do anything.
motorola service center is likely the only place that can fix it.
sorry for your luck.
edenah said:
Haha, as said. can't power off.
Np thanks for responding!
Anyone got an idea?
Click to expand...
Click to collapse
ericpeacock79 said:
if it got interrupted while flashing bootloader, you're pretty much not going to be able to do anything.
motorola service center is likely the only place that can fix it.
sorry for your luck.
Click to expand...
Click to collapse
exactly that's what I'm saying but he needs to get his phone to USA as he specified..
only a specialist can help ya
Sagar_1401 said:
exactly that's what I'm saying but he needs to get his phone to USA as he specified..
only a specialist can help ya
Click to expand...
Click to collapse
i see :'(
Ok Thank your guys
I guess its a lost cause.
edenah said:
i see :'(
Ok Thank your guys
I guess its a lost cause.
Click to expand...
Click to collapse
Lost cause? No, probably not... Do you know anyone in the US you trust well enough to receive the phone from repair and ship it to you where ever you are? I believe that is all you need. The US service center cannot ship outside of North America (maybe US), but they can receive packages from anywhere. If you had a US contact that could receive the device and forward it on to you it might be worth it to get it fixed if it is still under warranty, if it isn't, then it might not be worth fixing. Lots of things to consider here.