Related
THIS GUIDE WILL HELP YOU ROOT ANY WILDFIRE WITH HBOOT VERSION 1.01.0001/1.01.0002
This guide is in fact a combination of two other guides:
http://forum.xda-developers.com/showthread.php?t=1145035
http://forum.xda-developers.com/showthread.php?t=1130044
I take no responsibility for whatever may happen to your phone.
To root, you first need to gain S-OFF, this part is taken from the first thread.
So here we go,
- Before doing anything, make sure you have the latest HTC SYNC on your PC (get it from here).
- Connect your phone to PC and sync all your data (contacts, media, docs...etc.)
- Disconnect your phone, then uninstall HTC SYNC, but you must leave the drivers on your PC.
(i.e. Uninstall the htc sync program only, not the drivers)
S-OFFing the Device
Downgrade to HTC Froyo WWE for AlphaRevX "now named: Revolutionary" (HBOOT 1.01.0001)
It has been confirmed that AlphaRevX "Revolutionary" tool is not S-OFFing wildfire (buzz) 2.2.1, with HBOOT 1.01.0002!
Therefore, downgrading the HBOOT to 1.01.0001 is must for the meantime, to get an efficient S-OFF.
Lots of people seem to be having issues when trying to downgrade their Wildfire from a carrier-branded version (HBOOT 1.01.0002) to unbranded WWE (HBOOT 1.01.0001).
So, here’s a small package to help you do this.
click here.
If you have HBOOT 1.01.0001, you can skip to the step entitled Revolutionary
Extract this package somewhere you can find it, like your “Desktop” for example.
Step 1: run step1.bat from the package. This will downgrade your MISC partition to allow for the RUU downgrade.
At the end, GoldCardTool will start up, to allow you to create a goldcard which you will need before starting Step 2.
How to deal with Gold-Card Tool:
1. Switch off your phone, remove your microSD card.
2. Insert the microSD card into your card reader, connect it to your computer and format the card to FAT32 file system.
3. Insert the card into your HTC Wildfire and power it on.
4. Make sure USB Debugging is enabled on your phone in Menu > Settings > Applications > Development.
5. Connect the phone to your computer via USB and set the mode to charge only.
6. Launch Gold-Card Tool on your computer and click ‘GetCID’.
7. Copy the CID code from the text box and click the link shown below that text box to open it in your browser window.
8. In the browser window, enter all the details required and submit that form.
9. You should now get an email from PSAS. Open it and download the ‘GoldCard.img’ attachment.
10. Now set your phone’s USB mode to Mass Storage.
11. In Gold-Card Tool, click ‘Refresh’.
12. Select your mounted SD card from the drop-down menu saying “HTC MMC:”
13. Click ‘Load Goldcard.img’ and select the file downloaded in Step 11.
14. Click ‘Patch MMC’ and your Gold Card will be created. You may exit Gold Card Tool once done.
After you've made the goldcard, and patched it, continue with step 2.
• Step 2: run step2.bat from the package. This will downgrade your ROM version to HTC WWE Froyo for Wildfire (unbranded).
If you get a Customer ID error while doing this, your goldcard is not working!
Create a new goldcard and re-run step2.
Revolutionary
* Steps:
1st You need to get to: http://revolutionary.io/ to download the tool, and to get your “beta key” which you’ll get in a pop-up window in the same download page after you click the download link for (windows version).
The “beta key” is a must; the tool won’t work without it!
You’ll be asked to provide your phone “serial no.”, typically it should be something like HTXXETDXXXXX, and you can get it from:
Settings --> about phone --> phone identity.
Now, do the following:
1. Run latest version of HTC Sync on your PC and connect phone in HTC Sync mode and sync all your files. Remove HTC Sync and not the drivers.
2. Reboot phone.
3. Settings->Applications->Development->Check “USB Debugging”.
4. Run Revolutionary and connect phone to PC in “Charge Only mode”.
5. Revolutionary should recognize your phone and show your Device Serial number.
7. Type out the “key” in the Revolutionary tool software, keeping in mind the upper and lower case letters and press enter (you can copy / paste the key).
8. Revolutionary should start doing its job and you’ll get S-OFF in less than 90 seconds.
9. If it takes longer, just wait for the 15 minutes mark, if nothing, then reboot phone and retry.
(Some members got S-OFF after multiple tries)
Now, to get to actually rooting the phone by installing clockworkmod and subsequently, the superuser app.
1. Ensure that your SD Card is FAT32 then copy this to the root of your SD card: http://forum.xda-developers.com/attachment.php?attachmentid=548407&d=1300751790
2. Go into HBOOT(switch off phone and switch on while holding down the volume down button) and click yes when it asks you to update
3. Remove the img file from your sd card and add this file: http://bit.ly/su2361ef
4. Go into HBOOT and click Recovery!
5. Click install zip from sdcard (or some thing like that) (Protip: Navigate in the recovery with the trackpad, not the power button!)
6. Click choose zip from sdcard
7. Locate your zip and let it update
8. Boot into your now rooted phone and install ROM Manager from the market.
9. Open ROM manager and Install Clockword Mod recovery (or sth like that) twice in a row (this is important to ensure proper installation)
YOU ARE NOW ROOT!!!!
Optional: Use ROM manager to install CyanogenMod or another ROM of your choosing
this dont work for me i tried many times.... when i try step 2.bat , cmd pops up does a **** load of codes then closes instantly?
gagan313 said:
this dont work for me i tried many times.... when i try step 2.bat , cmd pops up does a **** load of codes then closes instantly?
Click to expand...
Click to collapse
Firstly, were you even on HBOOT version 1.01.0002?
If you were, check if the downgrade was successful after running step2.bat
If it wasn't make sure HTC Sync has been uninstalled but the drivers have not
If the drivers are in place, I suggest looking for a solution at the orginal guide found at http://forum.xda-developers.com/showthread.php?t=1145035
nope i have 1.01.0002 and step 1 does its stuff no problem then goldcard automatically starts up no problem with that and i patched it and everything then step2.bat comes up and starts downgrade but like its doing a bit and just closes instantly back to hboot still showing s-on 1.01.0002????
i h ave windows 7 ultimate 64 bit../??? any help?
gagan313 said:
nope i have 1.01.0002 and step 1 does its stuff no problem then goldcard automatically starts up no problem with that and i patched it and everything then step2.bat comes up and starts downgrade but like its doing a bit and just closes instantly back to hboot still showing s-on 1.01.0002????
i h ave windows 7 ultimate 64 bit../??? any help?
Click to expand...
Click to collapse
Try making a new goldcard and try again.
And are you sure USB debugging is on?
i did.... but i just need to know..
does it work on windows vista 32 bit or windows 7 64 bit or like linux 64 bit.??
please watch this and please tell me if im doing anything wrong......
http://www.youtube.com/watch?feature=player_embedded&v=e7N1XIkdG2M
p.s sorry for poor quality...;(
gagan313 said:
please watch this and please tell me if im doing anything wrong......
http://www.youtube.com/watch?feature=player_embedded&v=e7N1XIkdG2M
p.s sorry for poor quality...;(
Click to expand...
Click to collapse
The first instruction tells you to switch off the phone before removing the SD card.
Try it again.
If it doesnt work, run everything as administrator, else, go to the orginal thread and post your problems there
im running it on windows 7 ultimate 64 bit??? does that make any difference??/
gagan313 said:
im running it on windows 7 ultimate 64 bit??? does that make any difference??/
Click to expand...
Click to collapse
Shouldn't.... but I did it on a XP 32 bit so maybe you could try running in compatibility mode...
i tried that but no luck..... i also tried on my windows vista 32bit with no luck
Finally got this process to work for me after numerous unsuccessful attempt. Main problem was I was using Win7. Switched to Win 3.1 and things worked.
Also in the guide the step
7. Copy the CID code from the text box
Need to me clarified to ... "Copy the reversed CID code from the text box "
After that all good and am now back on Hboot 1.01.0001.
Thanks for the guide.
Like a charm. Thanks.
Thanks for the information
CWM Issue
Hi,
I need help regarding clock work mod recovery.....
I have rooted my phone successfully bt I am facing issue with CWM ie whenever I am trying to go to recovery-> install zip from sd card, my card contents doesn't pop up, instead only the symbol of CWM is displayed...
please help..
Rahul2929 said:
Hi,
I need help regarding clock work mod recovery.....
I have rooted my phone successfully bt I am facing issue with CWM ie whenever I am trying to go to recovery-> install zip from sd card, my card contents doesn't pop up, instead only the symbol of CWM is displayed...
please help..
Click to expand...
Click to collapse
make sure that you're using the proper controls...:
After boot you select items by vol keys and choose by hitting the power button.
In CWM you also select by vol keys but choose by hitting trackball
Have you done so?
thank u very much it did work....
bt I am stuck with a new issue....I was installing a custom rom and my phone is stuck in the htc window and is not booting up.
can u recommend any solution for it..
Rahul2929 said:
thank u very much it did work....
bt I am stuck with a new issue....I was installing a custom rom and my phone is stuck in the htc window and is not booting up.
can u recommend any solution for it..
Click to expand...
Click to collapse
At first boot it might take a while to boot up. If it remains stuck on the logo I'd suggest to reinstall but do a "full wipe/factory reset" from inside ClockworkMod (even better format system and data before).
BTW Which ROM are you trying to install?
Thank u very much for ur help....I appreciate u people very much....
Bt actually that rom was not good that's y I was facing that issue
Sent from my HTC Wildfire S A510e using xda premium
IF YOU HAVE PROBLEMS WITH CMD and are on Windows 7 (or similar), make sure you start CMD in admin mode.
Otherwise it doesn't work.
1- Make sure the files are stored in a folder in C:\ (or somewhere very short unless you know command line). For example: C:\goldcard
Copy the files from the folder they came in and throw them in there.
2- Go to start and write CMD. Now DO NOT single click the program or type enter. Instead do CONTROL+SHIFT+ENTER
This opens it in Admin mode. (some pop up confirmation may appear).
3- Navigate to the folder by writing "cd C:\goldcard". (Without the quotation marks of course. Use the name of the folder you created in step number one.)
4- write step1.bat
That should do it. The same applies to step2.
I want to flash a new rom where can I get magldr and what are the best methods to flash windows phone?
thanks in advance.
All the info you need is here. Use the search button.
smis said:
I want to flash a new rom where can I get magldr and what are the best methods to flash windows phone?
thanks in advance.
Click to expand...
Click to collapse
Go here: http://d-h.st/Kya and download the zip file. Inside is everything you need.
Unzip. The first one is the DFT_MLI_SAM1.exe. That is the one that gets MAGLDR on your phone.
Once that is done, the other DFT_WPI_SAM1.exe file is the best 7.8 ROM I have used yet.
It is discussed here: http://forum.xda-developers.com/showthread.php?t=1528984
To install:
0.) Have MAGLDR installed on your phone and Samsung Drivers installed on your PC
1.) Place the zip files 'OS.D000FF + CSC.D000FF + DFT_WPI_SAM1.exe + rapitool.exe + Readme.txt' in a folder
2.) Go to 'Settings' -> 'about' -> 'reset your phone' -> 'yes' -> 'yes'
3.) Right when the screen goes black press and hold 'voldown + camera'
4.) Press '<-' (cancel)
5.) Plug your phone into your PC
6.) Flash OS.D000FF + CSC.D000FF with DFT_WPI_SAM1.exe
7.) Wait
8.) Go through setup wizard on phone
9.) Go to 'Settings' -> 'about' -> 'reset your phone' -> 'yes' -> 'yes'
10.) Enjoy
MAGLDR and Custom ROMS
smis said:
I want to flash a new rom where can I get magldr and what are the best methods to flash windows phone?
thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=893618 <--- get MagLDR
http://windowsphonehacker.com/artic...r_and_custom_roms_on_samsung_devices-02-08-12
^^ great tutorial by Windows Phone Hacker Jaxbot on how to go about custom ROMming it up. Make sure you've got the drivers he refers to in the video (seriously just google "Samsung USB Drivers For Mobile" and DL them) and then follow the directions.
Watch the video on the WPH site first, and don't freak out if it takes a while when you do it. The usb/computer/phone picture will probably stay on the screen for a while before a progress bar appears. Also, make sure you hard reset the phone once the new ROM is flashed.
Can't Get it to Work
have a Samsung Focus 1.3 and I am trying to Install Clean ROM 3.0.
I believe I have all the proper drivers installed on my computer (Samsung USB, WMDC) I have installed MAGLDR 2.00 on the phone and I can enter MAGLDR mode by pressing volume down + cam + power. Upon pressing back it says "Wait USB" and as soon as I connect I see "USB! CMD connected"
However, when I run DWPI I get the following error:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (Active Sync or Windows Mobile Device Center)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDWPI.cpp (136)
Click to expand...
Click to collapse
I am running Windows 7 32 bit but I seem unable to get past this point. Would you please help me figure out how to get this working?
Thanks
avivasa said:
have a Samsung Focus 1.3 and I am trying to Install Clean ROM 3.0.
I believe I have all the proper drivers installed on my computer (Samsung USB, WMDC) I have installed MAGLDR 2.00 on the phone and I can enter MAGLDR mode by pressing volume down + cam + power. Upon pressing back it says "Wait USB" and as soon as I connect I see "USB! CMD connected"
However, when I run DWPI I get the following error:
I am running Windows 7 32 bit but I seem unable to get past this point. Would you please help me figure out how to get this working?
Thanks
Click to expand...
Click to collapse
Have your tried to run the executable as administrator? Right click on the file and select Run as Administrator.
avivasa said:
have a Samsung Focus 1.3 and I am trying to Install Clean ROM 3.0.
I believe I have all the proper drivers installed on my computer (Samsung USB, WMDC) I have installed MAGLDR 2.00 on the phone and I can enter MAGLDR mode by pressing volume down + cam + power. Upon pressing back it says "Wait USB" and as soon as I connect I see "USB! CMD connected"
However, when I run DWPI I get the following error:
I am running Windows 7 32 bit but I seem unable to get past this point. Would you please help me figure out how to get this working?
Thanks
Click to expand...
Click to collapse
I installed Magldr and Clean Rom just the other day and encountered the exact error, but I wish I paid attention to what I had done to resolve it. I believe it matters when you connect the phone to the computer. Try this:
- Disconnect your phone from the computer
- Run the Magldr installation and proceed through the steps until the point where you have to click Next to start the installation (do not start the install, just leave it at the screen just before the installation starts)
- Follow the steps mentioned before to get your phone ready for Download mode
- Now connect your phone to the computer and confirm that the device is connected and ready
- Go back to the Magldr installation window and proceed with the installation
I want to say, at least in my case, making sure the phone was connected to the computer when everything was ready (versus leaving it connected all the time), helped resolve the error.
Good luck!
I just installed Magdlr and CleanRom and got this error too. All I had to do was close the installer and unplug the phone from my PC for a few seconds. Once I plugged the phone back in and started the installer it worked the second time.
Camera button don't work.
wildbilll said:
Go here: http://d-h.st/Kya and download the zip file. Inside is everything you need.
Unzip. The first one is the DFT_MLI_SAM1.exe. That is the one that gets MAGLDR on your phone.
Once that is done, the other DFT_WPI_SAM1.exe file is the best 7.8 ROM I have used yet.
It is discussed here: http://forum.xda-developers.com/showthread.php?t=1528984
To install:
0.) Have MAGLDR installed on your phone and Samsung Drivers installed on your PC
1.) Place the zip files 'OS.D000FF + CSC.D000FF + DFT_WPI_SAM1.exe + rapitool.exe + Readme.txt' in a folder
2.) Go to 'Settings' -> 'about' -> 'reset your phone' -> 'yes' -> 'yes'
3.) Right when the screen goes black press and hold 'voldown + camera'
4.) Press '<-' (cancel)
5.) Plug your phone into your PC
6.) Flash OS.D000FF + CSC.D000FF with DFT_WPI_SAM1.exe
7.) Wait
8.) Go through setup wizard on phone
9.) Go to 'Settings' -> 'about' -> 'reset your phone' -> 'yes' -> 'yes'
10.) Enjoy
Click to expand...
Click to collapse
Hi there,
I have one question and how can I access step # 3 because the camera button on my phone is not working ( I Think it is a hardware issue). Is there any other workaround to do this without using the camera button?
Thanks.
frankvcs said:
Hi there,
I have one question and how can I access step # 3 because the camera button on my phone is not working ( I Think it is a hardware issue). Is there any other workaround to do this without using the camera button?
Thanks.
Click to expand...
Click to collapse
Hi,
No.
Thank you.
Disclaimer: Use at your OWN risk. Data loss is possible. If anything goes wrong, don't blame us. We are only trying to help.
Credit:
Person who came up with the idea @Naman Bhalla
Person who edited the rawprogram0_64G.xml @Naman Bhalla
Source to the original OPO Recovery tool and the drivers.
Credit to TWRP, for their 2.8.6.0 image we are using.
Source to the bootloader unlocker.zip
Special thanks to @indest on OP Forums for being a real trooper and risking its life for the community.
Download:
Tool + Driver + Bootloader Unlock zip
Also, download the ROM you currently have. The exact same version number!
I repeat, you must have a copy of your current ROM!
Setup:
Download the above files
Connect your OPO to the computer (Windows 7, 8 or 10)
Press the volume up + power button (at the same time) until you feel a vibration
If your device says fastboot, press the volume up + power button again, till your screen goes black and you hear a sound on the computer.
Start> Device Manager
The following drivers should be detected automatically in device manager (Qualcomm HS-USB QDLoader 9008)
If ADB interface is seen, read step 3 again
If you see QHSUSB_BULK
Start> CMD (RunAs Admin)
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
Reboot your computer
Enter Device Manager (start> device manager)
Right click QHSUSB_BULK> Update driver software> Browse my computer for driver software> Browse
Select <path of unzipped files>\Drivers\Qualcomm 2012
Check "include subfolder"> hit Next
Navigate to '<path of unzipped files>\OnePlusRestoreTool" folder
Right click on the "OnePlusRestoreTool(64GB).exe" and 'RunAs Administrator"
The program should start automatically doing its thing. If not, select the line that says 'COM' and hit start.
Once you see green text, hit log and make sure you have a BIG GREEN OK.
Unplug the device and press the volume down + power button till you feel a vibration.
It is important that you do not boot into your system, else, your data partition will suffer!
TWRP should now load. Once loaded, click Mount.
Connect your OPO to the computer.
Toggle off/on MTP (MTP should be ON)
Using your computer, transfer your ROM and the OnePlusOne-BootUnlocker.zip to your "Internal Storage".
Hit the back button
Hit install> go to /sdcard/OnePlusOne-BootUnlocker.zip > swipe to install
Then hit install again> go to /sdcard/<rom zip> (the one you started with) > swipe to install
Reboot device.
Isn't indest the best?
Awesome as always
pass for archives?
Hi, the download link is asking for a decryption key
Also does this still work in 6.0.1?
Hi All,
After seeming that I'm locked out of my own device for 72 hours, I managed to scour the net and use parts of other tutorials to successfully bypass the "you're device was reset, please log in" loop.
So I should point out I was running a Pure Nexus rom running 6.0 with a custom recovery, you're results may differ but you've got nothing to loose.
Pre Requisite
ADB and Fastboot - You don't need to spend an hour installing the whole kit, just visit http://developer.android.com/sdk/index.html and scroll right down to the section where it says "SDK Tools Only" and click on "installer_r24.4.1-windows.exe"
Once installed the SDK manager will open, now make sure the top 3 are checked which are:
Android SDK Tools
Android SDK Platform-tools
Android SDK Build-tools
And also scroll down in the list to find Google USB Driver
Once all of that is done download the latest Google USB drivers (although the SDK installs USB drivers it still shown an exclamation mark in device manager") http://developer.android.com/sdk/win-usb.html
To install those USB drivers just go into device manager and if you se Nexus 6 under "Other Devices" just right click and click update driver software and then click browse my computer and get it to scan the Google USB driver folder you downloaded.
restart your phone into recovery (Volume Down and Power button)
now again in device manager make sure the Nexus 6 doesn't have a yellow icon identifying there's a problem with drivers or that the nexus 6 is listed in other devices. If either of those are present right click and update drivers > browse from computer and select the Google USB drivers you downloaded previously.
Bypass FRP
With all that confirmed restart your Nexus and leave it on the Welcome screen.
Now, you need to get into platform tools which is located:
C:\Users\YOURUSERNAME\AppData\Local\Android\android-sdk\platform-tools
if you can't see AppData you need to enable hidden files and folders
once in platform tools hold SHIFT and right click any blank space and click "Open command window here"
then type "adb devices" and it should list your nexus under devices, if it doesn't open device manager and check your drivers.
If it does show your nexus execute this command which edited from another source:
"adb shell am start -n com.android.settings/.Settings"
Your nexus will now open the settings menu =] in settings go to "Backup & reset" then click "Factory data reset" (although it says it wipes user data, mine was untouched, I can't say the same for so you may lose some data if you proceed)
your phone will reboot and in my case it opened my custom recovery and executed a script, the phone will restart again and go to boot, hold the power button to force shut down the nexus and boot into recovery mode. In recovery mode flash a ROM, if you don't have a ROM download one on your PC and then connect your Nexus to your PC via USB and copy it over.
Once the ROM is installed you won't get the "you're device was reset" screen.
"
You left out some key details which are covered in the guide I wrote up a few days ago. Here's the link.
http://forum.xda-developers.com/showthread.php?t=3261846
Sent from my Nexus 6 using Tapatalk
this does not work, because in order to adb devices to populate anything you would of had to enable usb debugging from within the phone, and if you're locked our from FRP, you cant access the settings to turn on the usb debugging
Bootloader LOCKED .. and asking for gmail ID ??
[GUIDE/TUTORIAL/HOWTO] HTC One M8 from Stock to Android 12.1 / LineageOS 19.1
[GUIDE/TUTORIAL/HOWTO] HTC One M8 any version (single SIM: m8ul, m8vzw and m8spr or dual SIM: m8dug and m8dwg) stock to Android 12.1 / LineageOS 19.1
This detailed step-by-step guide helps you transform your HTC One M8 (any version) to a powerful one with Android 12.
Make sure you have the One M8 model, in Android, go to Settings > About phone and check the model.
CHANGELOG
v6. Moved to Android 12
v5. Moved to Android 11, improve readability, update pack
v4. Prepare for Android 11, Updated pack with latest TWRP
v3. Updated pack with latest Magisk
v2.1. Drop ADB 15 sec installer and use latest adb and fastboot.
v2. Update pack and tutorial for TWRP 3.4.0-1
v1. Initial release
1) DOWNLOAD
- djibe HTC One M8 pack (~40 Mo) : https://bit.ly/djibe-onem8-pack
(includes HTC USB Drivers, recovery TWRP 3.6.1_9-0 for all m8, Magisk Root, adb & fastboot.exe).
Unzip the djibe folder from the zip on root folder of C:\ drive.
- ROM Unofficial LineageOS 19.1: https://forum.xda-developers.com/t/rom-12l-unofficial-m8-m8d-lineageos-19-1-stable.4464733/
Download latest build here (compatible with all M8 signel/double SIMs variants): https://www.androidfilehost.com/?w=files&flid=334966&sort_by=date&sort_dir=DESC
# M8 GPe partition layout is no longer supported. The device must first be converted to Sense firmware, otherwise installation will fail.
# Android 13 is incoming
+ MindTheGApps ARM 12.1: https://androidfilehost.com/?w=files&flid=322935&sort_by=date&sort_dir=DESC
+ Charge phone to 100%
+ MicroSD card formatted in FAT32
+ Copy ROM + Google Apps + both Magisk files on microSD card. Insert it in phone.
WARNING. This tutorial uses Microsoft Windows.
WARNING. Warranty is now void.
WARNING. Read carefully the sentences starting with ###.
2) BACKUP DATA AND INSTALL DRIVERS
Disable Antivirus.
Install drivers from my pack:
right click on HTCDriver.exe > click on Run as administrator and continue the setup.
Connect HTC One (while phone on) to PC, let drivers install.
In Windows explorer, HTC One should be available.
### If not make sure phone connection is in File transfer mode (see Android notifications).
### Phone is still not visible in Windows Explorer ? See fix at end of tutorial.
Collect all personal photos, videos, etc ... and backup these on PC.
Use an app like Backupyourmobile/SMS Backup & Resotre to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
Disconnect phone.
Check that you have the latest official updates.
### If your phone is Simlocked/carrier locked/Network locked, don't go further.
Visit official website of your network carrier (or call their support) to retrieve your desimlock code.
Ask them for details on how to remove simlock.
How do I know my phone is simlocked ? When you insert a SIM card from another operator, network is inaccessible.
Only a stock ROM can remove simlock.
To go back from custom ROM to stock, see dedicated section at the end of tutorial.
3) UNLOCK BOOTLOADER
In Android, go to Settings > About > Software information > More.
Tap 7 times on Build number. It unlocks Developer options.
Go back to the About menu, you can see the new Developer options menu.
Tap on it, accept the warning.
Toggle on the USB debugging option.
Connect phone, a message appears on phone : Allow USB debugging?
check Always allow and confirm by tapping on OK.
Now, open a Windows command on my "flash" folder (hold Shift + right click on folder -> Open a windows command here).
### Then navigate to my flash folder (if it is on desktop) with this command :
Code:
cd /d C:\djibe\flash
Enter command :
Code:
adb devices
, confirm by pressing Enter.
Command returns :
Code:
List of devices attached
HT35****** device
### If no device is found, uninstall and reinstall properly the drivers while antivirus is off. Or see fix at the end of this tuto.
### Or start fresh on another PC.
Now type :
Code:
adb reboot bootloader
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Type:
Code:
fastboot devices
Command returns :
Code:
HT35**** fastboot
### You may have to fix drivers again (see fix at the end of tuto)
Type:
Code:
fastboot getvar all
Bootloader must be in version 3.19 (Thx @sterphles)
Type:
Code:
fastboot oem get_identifier_token
, confirm by pressing Enter.
Command returns multiple lines.
Select with your mouse all the lines from
Code:
<<<< Identifier Token Start >>>>
(included)
to the line
Code:
<<<<< Identifier token end >>>>>
(included).
Now on keyboard copy (Ctrl + C combo), then open Notepad.
In Notepad, paste those lines (Ctrl + V combo).
Now manually remove all the (bootloader) strings from each line.
Your notepad should now look like this :
<<<< Identifier Token Start >>>>
37A5DBF4FE5F0D9F4425E54AA91AFDBF
2A20E9C67C3BB4FAE60263F76BDEC6AC
847BF9FFB11DAEA4AB88AC8710435449
9BC12E93DF4C54FFE3D064C4C810C49A
2CDAF2E0CD3A164FED4A568CB0FD2AC6
C01AA991733D949C00987062D691DE91
8AA1C97CEBC3ACE83FECE75A1D03CE72
62414C7DC36A73AFCBF433E1EBE2EDC7
E272F73309632D3EF8C86E472B65E8EF
37E46B52FE3F94FC69D1854CA3DE6F48
C3E10001B233A70B1EAF35134F51FCC6
353E0CC98534E6E60A241A7063D0BE2F
A5B752E75C1C47E6F739BDBE67D024DA
3292A14278247557632639802722A86C
E61424F7666AE085AA9905096FEED1AD
5ECBBD867544E95ABDDA277690B8CB55
<<<<< Identifier Token End >>>>>
Now visit this website : https://www.htcdev.com/bootloader/
Register on the site. Confirm registration with your email.
In the select menu, chose HTC One (M8), click Begin unlock Bootloader button.
Agree to legal terms.
Next page, go to the bottom and click continue to step 5.
In the bottom of this page, in the lower textarea "My Device Identifier Token",
copy and paste the multiple lines you just edited (my example is just above).
Click Submit.
HTC tells you : Token Submitted Successfully.
Open your mailbox (associated to your HTC account).
Copy the Unlock_code.bin file attached to email in my "flash" folder you unzipped.
In Windows command, type :
Code:
fastboot flash unlocktoken Unlock_code.bin
, confirm with Enter.
Command should return :
Code:
unlock token check successfully
Back to phone, press Volume+ to select "Yes, unlock bootloader", then Power button to confirm flash.
Now wait while phone is going to Factory reset.
Don't let Android restart by holding both Power + Volume- to enter bootloader immediately.
FASTBOOT menu is overlined in red.
4) FLASH TWRP RECOVERY
Using the same Windows command prompt, enter :
Code:
fastboot devices
to make sure phone is still available.
Then
Code:
fastboot flash recovery twrp-3.6.1_9-0-m8.img
Command returns :
Code:
finished. total time: x.xxxxs
Now on phone, press Volume- to highlight HBOOT, confirm with Power button.
You are back to the booloader screen (UNLOCKED is written on top line), press Volume- to navigate to RECOVERY, and confirm with Power button.
Phone reboots in TWRP recovery.
5) BACKUP STOCK SYSTEM
In TWRP, check Never show this screen and Swipe to Allow Modifications.
You land on TWRP Home screen.
Always make a backup of your stock system. We never know when a weird bug will decapitate the system.
Go to Backup menu, select all partitions and Backup to microSD card.
Backup the generated TWRP folder content from your microSD card to PC.
6) WIPE PARTITIONS
Back to Home menu, go to Wipe > Advanced wipe.
Select Dalvik / ART Cache, Cache, System, Data, Internal Storage then Swipe to Wipe, go back to Wipe menu.
### Don't wipe SDcard
7) FLASH ROM, ROOT/MAGISK AND GAPPS
Back to Home screen, tap on Install > choose lineage*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active)
then Add more Zips -> Magisk*.zip,
then Add more Zips -> mindthegapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end (can be long).
When completed successfully, tap on Reboot.
Tap on Do not install when TWRP asks for the app install.
Wait during long first boot.
Setup Android.
8) You can use Backupyourmobile to restore data,
use GPS Status & Toolbox app to enhance GPS fix.
That's it.
Enjoy,
djibe
THANKS to TWRP team, LineageOS team, tarkzim, ckpv5, alray, , Flyhalf205, icxj1, R1ghtC, gimmeitorilltell, All M8 contributors.
##################################################
A) Fastboot devices doesn't show any device connected
Install HTC USB drivers
Reboot PC
Open Windows Device Manager (Windows + R shortcut on keyboard > devmgmt.msc > hit Enter)
Search for phone at Other devices submenu > Device is named Android 1.0 or My_HTC
### If it is My_HTC > select it > right click > Uninstall. Disconnect phone. Reconnect phone. Now recognised as Android 1.0.
Select device Android 1.0 > right click > Update Driver
Search locally for driver > Show a list
Select ASUS Android Device.
Manufacturer: select Google, Inc. and set driver to Android Bootloader Interface
Confirm install.
B) Go back to stock from a custom ROM with a HTC One M8
- Either restore your TWRP backup with TWRP recovery
- Or restore a community TWRP backup with TWRP recovery (https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860 see posts 2 & 3)
### With S-ON and keep device Unlocked
To find suitable backup for device, boot phone in Bootloader mode (Power + Volume-)
Look at your hboot version (hboot 3.19.0000 is most frequent)
Launch a fastboot command:
Code:
fastboot getvar all
Make sure IMEI is a valid number.
Look at your CID and MID values. Try to find exact same TWRP backups for your phone.
### Flash only exact model versions.
Then wipe all partitions and restore the correct TWRP backup an angel made for you.
- If TWRP restore fails, start with these posts :
You will need a Rom Update Utility (RUU) for your exact model version.
This is compatible with S-ON, will need to relock your Bootloader (save your Unlock_code.bin +++) and need original recovery
https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
https://forum.xda-developers.com/htc-one-m8/general/guide-restore-european-htc-one-m8-to-t3072235
C) No IMEI visible and no cellphone network detected with HTC One M8
Composing *#06# shows an empty IMEI dialog window.
or Settings > About phone > IMEI. IMEI: Unknown, IMEI SV: Unknown
Refer to B) tutorial to get back to stock.
Tuto updated for latest TWRP recovery
Please remove the 15 second adb. The OP of adb 15 second states in his post that it's outdated and should not be used.
Never_Sm1le said:
Please remove the 15 second adb. The OP of adb 15 second states in his post that it's outdated and should not be used.
Click to expand...
Click to collapse
Very nice !
Thx, pack and tutorial updated.
Can I use this guide for my m8wl?
And if it's possible, which of the two builds should I download?
Alexcxvtr said:
Can I use this guide for my m8wl?
And if it's possible, which of the two builds should I download?
Click to expand...
Click to collapse
Hi, look at this first: http://droider.eu/2014/09/20/htc-one-m8-models/
Then pick the correct ROM.
Thank you .I did it by following your guide.
murphylim said:
Thank you .I did it by following your guide.
Click to expand...
Click to collapse
Thanks, it is always encouraging to have support.
Still a good phone
Hi, I updated pack with latest Magisk root version and checked download links.
For Windows 10 users, use HTC drivers version v4.17.0.001 - Download them from here - Zippyshare.com - HTC Mobile Driver v4.17.0.001.exe
Everything else works just fine. @djibe89 thank you.
hymnz said:
For Windows 10 users, use HTC drivers version v4.17.0.001 - Download them from here - Zippyshare.com - HTC Mobile Driver v4.17.0.001.exe
Everything else works just fine. @djibe89 thank you.
Click to expand...
Click to collapse
Hi, thanks for feedback.
Drivers 4.2.0.001 didn't work ?
djibe89 said:
Hi, thanks for feedback.
Drivers 4.2.0.001 didn't work ?
Click to expand...
Click to collapse
No. Not on Windows 10.
djibe89 said:
Now type :
Code:
adb reboot bootloader
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Type :
Code:
fastboot devices
Command returns :
Code:
HT35**** fastboot
### You may have to fix drivers again (see fix at the end of tuto)
Click to expand...
Click to collapse
Hi,
I'm at the stage of trying to unlock the bootloader. The phone restarts in fastboot mode but when i type in fastboot devices nothing happens.
and then if i skip that and type get_identifier_token. the return is waiting for any devices. and nothing happens.
What have I missed?
Thanks
i've since been able to get past this stage. I used htc driver 4.17. I'm now stuck on the token. cmd prompt keeps saying cannot load the file no such file or directory. but i'm so sure i have the file in the right folder
juggled_balls said:
Hi,
I'm at the stage of trying to unlock the bootloader. The phone restarts in fastboot mode but when i type in fastboot devices nothing happens.
and then if i skip that and type get_identifier_token. the return is waiting for any devices. and nothing happens.
What have I missed?
Thanks
i've since been able to get past this stage. I used htc driver 4.17. I'm now stuck on the token. cmd prompt keeps saying cannot load the file no such file or directory. but i'm so sure i have the file in the right folder
Click to expand...
Click to collapse
Hi, when
Code:
fastboot devices
doesn't return anything, it means there is an USB driver problem.
You'll have to try to fix from Windows Device Manager.
hymnz said:
No. Not on Windows 10.
Click to expand...
Click to collapse
Hi, the Driver installer from my pack (HTCDriver_4.2.0.001) sends an error during install, but then drivers finally install.
djibe89 said:
Hi, when
Code:
fastboot devices
doesn't return anything, it means there is an USB driver problem.
You'll have to try to fix from Windows Device Manager.
Click to expand...
Click to collapse
Thanks for your work. I managed to plod my way through everything and get it working. Very happy the old phone can keep going on.
juggled_balls said:
Thanks for your work. I managed to plod my way through everything and get it working. Very happy the old phone can keep going on.
Click to expand...
Click to collapse
Awesome !
Enjoy
Hi, tutorial and pack updated for Android 11
thx for the guide!
seamonkey420 said:
thx for the guide!
Click to expand...
Click to collapse
Hi, glad you liked it !
Enjoy your phone