Related
Ok, here it is guys! I know all you stock captivators have been anticipating this!
This is the stock KH3 and now KI1/KI2 kernel with clockwork recovery injected. Also my first go at a project like this.
The only issue I see is that /system won't unmount, so no nandroid backups (they won't restore). /system will now unmount, but restoring a nandroid backup will totally bork your phone, don't even try! (unless you are ready to odin/heimdall back!)
I have to give a huge thanks to eXistZ, he helped point me in the right direction, and generously gave me scripts he uses. And let me bug him on a regular basis. Thanks dude! And a thanks to Chainfire for pointing me in the right direction to finding why system wouldn't unmount.
Anyone is available to use the kernel any way they like. Cook it in roms released here, flash it to your personal rom, or stock KH3! Take it apart, look at the pieces, see if you can make it better! I am far from a pro at this, and it may not be perfect, use at your own risk..yada yadda.
Nandroid is still broken, still looking into it.
Update 9/11/11
I am releasing this now, because it appears that the /system not unmounting issue causes problems for full wipe roms, with big system changes. This should help. Just don't try to do a nandroid restore, it will make your phone hang at the at&t logo! You have been warned!
It is also possible to format /system from cwm if anyone feels the need (you can't boot after, so only do so if you are also planning on also installing a rom).
The links below should be fixed to point at the new versions.
KH3
Here is the odin flashable version flash it first if your on stock: Link Mirror
Here is the KH3 cwm flashable kernel5! Flash it second to get init.d support if your on stock or don't already have cwm LINK It has init.d support and the same tweaks listed for the KI1/KI2 kernel below.
Here is a heimdall package for stock kh3 with the cwm kernel3 built in. Link It will wipe your phone! Make A backup as necessary. Hopefully it can help people go from stock to a custom rom in fewer steps, or recover from a soft brick Let me know if you find an issue with it. It contains factory.rfs, dbdata.rfs, chache.rfs, param.lfs, modem.bin and the cwm_kernel zImage.
KI1 KI2
Update 9/29/11
I'm just going to do one version for KI1/KI2 now that it appears the same kernel will work on both.
Here is the original odin flashable kernel to give you cwm, flash it first to get cwm if you don't already then flash the cwm with init support. Link And my original post with the stock kernel.
Now for the good stuff!
mtcarey modded my kh3 kernel here, to add init.d support, made changes to allow ADB / DDMS to run as root, and symlinks from Busybox to "ls" and "ps" have been removed from /sbin so that DDMS will work correctly. They now fall back to Toolbox links in /system/bin. Thank him in his thread! Awesome work! I think I have all of those mods pulled to ki1/ki2, plus:
+ Juwe11's LMK settings
+ Tweaked Kernel Scheduler Settings
+ Tweaked IO Scheduler Settings
+ Tweaked Ondemand Governor/Sampling Rate
+ Tweaked Readahead to 512 on internal/external SDs (mmcblk blocks)
You can get it here: Link Mirror
If your on stock you will need to flash the odin version to get cwm then the new tweaked one for the init.d scripts, /etc/init.d/S99complete is needed! If you remove it, the phone won't boot!
For any of you losing root when you flash my kernel or for anyone on straight stock, you can get root by flashing ChainsDD root: http://forum.xda-developers.com/showthread.php?t=682828 or what I mention below.
If your on straight stock and don't already have cwm, flash my odin version first, then ChainsDD from the above link, or:
Grab my cwm zip that I made from ChainsDD and my latest kernels (with tweaks)
KH3 and root
KI1/KI2 and root
Hopefully those will help.
SWEET!
This Man Is A Beast, like the good one on X-men!!
Great Job.
You all reading this and wondering;
= its Stable
= its has awsome batterylife
= easy to use
= and worry free.
GO TEAM PHOENIX!!!
For those wanting the stock E3 recovery back....(for the life of me I don't know why) I will be posting it here today.
hah, a fellow ohioan would be the one to release this. good work bud.
So...are you guys gonna make my cappy NOT suck anymore?
Sent from my GT-I9000
Awesome! You rock dude, thanks!
Great job ! Appreciate the hard work by all !!
Dont forget to vote his thread.
a-hem' Fivestar*
Amazing!
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!
Thanks a lot...
U R THE BEST!.. Good luck with your future work. Hope to see more work from u.
Thanks again for all the hard work.
keller.jeff said:
So...are you guys gonna make my cappy NOT suck anymore?
Sent from my GT-I9000
Click to expand...
Click to collapse
Send it to me, I don't think they suck!
But, yeah, custom stuff on your phone can only make it better.
Awesomeness.....!!!!
Sweet! Nice job y'all!
Any reboot during call issues like on kf1? I know its early on, but wondering if anyone has experienced this on any kh3 version. Thanks for ur work. No cwm has kept me from trying kh3. Can't wait to flash.
Sent from my SAMSUNG-SGH-I897 using XDA App
i know what crash you are talking about, and i had it too on kf1, but have yet to experience it on h3. that doesnt mean its gone though because i havnt given it the same stressing as f1.
Da Bomb...
Did this break data connection for anyone?
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!
I would like to know how to do this. But I will try to do it by myself first.
If I getting stuck please let me PM for your help
I've heard word of "the best" battery life. Can anyone attest to this? I can't believe that from Samsung's track record....
Great work!! Flashing after post. Far as battery life. Every phone and phone user is different. So life varies. Me I crank brightness up use wifi, and GPS always. Like tonight buying a car 260 mile round trip used GPS to get there started with 100% and was. On 26% whenever I got there. Just appreciate that you have a device that makes your life easy and fun! I always turn wifi off and do my best to conserve battery. The captivate is truely a bad ass device. My brother was over last night. And we were playing with phones. He dropped his iPhone 4 and used my cappy cause its better he said
Sent from my SAMSUNG-SGH-I897 using XDA App
great work dude.......
Hello,
I'm successfully booting a second Rom on my SD Card. Here is what I did
- Build custom ICS kernel. Source from SpeedMod K3-3
- Make a copy of current rom and put on SD card.
- Boot the rom on the SD Card using the custom kernel
I'm currently testing a function to switch the rom by pressing the home/or any key button during boot.
I'll post the kernel and instruction how to setup a rom on the SD card soon.
Reserved
Reserved1
I'm liking the sound of this.....
Not sent from an I phone....cos I'm not a fanny.
heard that it's more difficult than on htc devices. nice though if u manage to get it working. looking forward to this, thanks!
chuandinh said:
Hello,
I'm successfully booting a second Rom on my SD Card. Here is what I did
- Build custom ICS kernel. Source from SpeedMod K3-3
- Make a copy of current rom and put on SD card.
- Boot the rom on the SD Card using the custom kernel
I'm currently testing a function to switch the rom by pressing the home/or any key button during boot.
I'll post the kernel and instruction how to setup a rom on the SD card soon.
Click to expand...
Click to collapse
I'm sorry, but placeholders aren't allowed in Development. When you're ready to post with files, links, etc. you can then open up a thread in Development.
Sounds good.
Sent from my GT-N7000 using Tapatalk 2
Im waiting please update the thread with kernel and instructions asap.
Thanx for your work
Mark me as very interested
Oh my good ,,, we are waiting ^_^
Interesting, looking forward to it!
Sent from my GT-N7000 using xda premium
Update: Sorry guys, I've been busy, so I couldn't have enough time to write the instruction. It's very easy to set up with my scripts.
1. Install any ICS rom - flash the rom like you've been doing. (be careful about EMMC brick, please don't wipe using unsafe kernel, even if you are on my modified kernel)
2. Flash my scripts using CWM to copy current rom to the SD card.
3. Flash My modified speedmod ICS K3-3
4. Reboot
Please note that, this method only works if both roms are ICS. It will not work if you have one rom is GB and one rom is ICS. Unless, somebody can make a kernel that works for both GB and ICS.
I'm test couple of changes to the config file before upload the script & kernel.
wow great
please post some videos too
Looks promissing
A rom to be used on work and another to use at home *_*
Will the apps be shared between the roms?
Good idea, that's what I'm trying to do. I have a init script that you can use the same application file to save space. It's working on my old roms. I've not tested it with ICS roms. I got a lot of force closes when I try to share both apk and data.
projeto56 said:
Looks promissing
A rom to be used on work and another to use at home *_*
Will the apps be shared between the roms?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1748588 for updates
Hiya, i am in the UK England and have a Samsung Galaxy Apollo GT-5801 which was on orange but unlocked
and now fully rooted using SuperOneClick it's currently running stock ROM and no kernels have been flashed.
so it's basically just rooted.
i have been reading in depth about flashing kernels/roms and seen everyone always saying make a backup
with clockworkmod recovery,
well now i am stuck the apollo according to clockworkmod website and ROM manager doesn't have any
supported application for this model of phone. every time i go to install via rom manager it says sorry this
phone is not supported unless you have installed clockworkrecovery by some other method.
So can someone tell me how i can get Clockworkmod recovery onto my phone with the custom rom it already has?
this way i can make a backup of my nand/phone and be happy that i can just restore it if and when needed.
not really interested in using custom roms i don't want to mess with that side i am happy with the phone as it is
just i wish when holding down power + volume + home button the recovery hboot screen had the clockworkmod instead.
all i rooted the phone for was to get shut of the stock apps taking up space, my phone is now how i like it.
and just want to be-able to make an image to restore back to.
i have tried using premium apps like titanium backup pro but its useless because that only lets you
backup and restore in the phone OS and plus it makes like 150 separate files instead of 1 .img file or zip file
i need something i can backup/restore if my phone one day doesn't boot.
i just downgraded my wife htc wildfire to be-able to root and install cygenmod7 which she is loving.
but that phone has clockworkmod (rooted with unrevoked) so it automatically installed it.
Anyway thats the background, and the reason i really need to get this nand backup working on my phone.
can anyone , anyone who's somehow installed clockworkmod recovery on their Apollo please help me out.
thank you!
Just flash a custom ROM such as Purumod v3. You don't know what you're missing in terms of performance. It's amazing! And it also has CWM pre-installed as do all of the ROMs on this forum. It saves you the hassle of finding the CWM files and having to manually overwrite some of the system files. If you really don't want to install a custom ROM then you can flash the G3Mod kernel which has CWM pre-installed or you can move this file to /system/bin.
MicroGeek said:
Just flash a custom ROM such as Purumod v3. You don't know what you're missing in terms of performance. It's amazing! And it also has CWM pre-installed as do all of the ROMs on this forum. It saves you the hassle of finding the CWM files and having to manually overwrite some of the system files. If you really don't want to install a custom ROM then you can flash the G3Mod kernel which has CWM pre-installed or you can move file to /system/bin.
Click to expand...
Click to collapse
Thanks for the quick reply, i looked into the G3mod Kernel it states there that the latest version is available
but when you click the download link to the files the latest there is a kernel below that.
code.google.com/p/g3modteam/downloads/list
if you look there the latest version they have is G3MOD_2.4.1_NON-OC.zip but there is a thread in G3MOD advertising 2.5
but i cannot see or find this 2.5 anywhere, obviously i want the latest as it includes the latest CWM version from what i can tell
on the features list.
unless i am blind 2.5 is not available at the link above sorry not got 10 posts so can't post the actual link?
GraphiX2004 said:
Thanks for the quick reply, i looked into the G3mod Kernel it states there that the latest version is available
but when you click the download link to the files the latest there is a kernel below that.
code.google.com/p/g3modteam/downloads/list
if you look there the latest version they have is G3MOD_2.4.1_NON-OC.zip but there is a thread in G3MOD advertising 2.5
but i cannot see or find this 2.5 anywhere, obviously i want the latest as it includes the latest CWM version from what i can tell
on the features list.
unless i am blind 2.5 is not available at the link above sorry not got 10 posts so can't post the actual link?
Click to expand...
Click to collapse
Even i couldnt find ver 2.5 !
mrn123 said:
Even i couldnt find ver 2.5 !
Click to expand...
Click to collapse
so if their is 82 people posting thanks, it must exist somewhere
then again i have come accross G3mod 3.0 Final which now i am totally confussed!
2.5 doesn't exists only 2.41 and now their is talk about G3Mod v3.0 kernel???
i downloaded that but it's a file that comes with the mystical everyone uses it but no-one knows where it comes from ODIN tool
i thought all kernel files can be installed from the SD card?
did I helped?
G3MOD v2.5
http://forum.xda-developers.com/showpost.php?p=26082562&postcount=2800
for system partition backup as .image backup
http://www.addictivetips.com/mobile...es-boot-recovery-and-system-partition-images/
^^ that one I have never tried
for CWM installed custom kernel or ROM
Nikhil_android said:
G3MOD v2.5
http://forum.xda-developers.com/showpost.php?p=26082562&postcount=2800
for system partition backup as .image backup
^^ that one I have never tried
for CWM installed custom kernel or ROM
Click to expand...
Click to collapse
------------
WOW fantastic i just don't get it!! how did you find that? comes to something when the
Original Poster who's giving his links out to download his kernels can't even seem to provide 2.5
but yet someone who isn't the creator seems to have all the files current.
thanks much appreciated, wonder why 2.5 isn't on the google downloads site?
all his other files are there just missing 2.5 for some bizarre strange reason
GraphiX2004 said:
------------
WOW fantastic i just don't get it!! how did you find that? comes to something when the
Original Poster who's giving his links out to download his kernels can't even seem to provide 2.5
but yet someone who isn't the creator seems to have all the files current.
thanks much appreciated, wonder why 2.5 isn't on the google downloads site?
all his other files are there just missing 2.5 for some bizarre strange reason
Click to expand...
Click to collapse
Its because the Dev who uploaded version 2.5 forgot the Google code password and I would recommend using fugumod kernel and the cwm file I posted since G3MOD kernel doesn't give as good battery life as fugumod.
Click thanks if I helped.
wouldn't it be a good idea for him to maybe edit his first post explaining that and maybe putting on mediafire or some other hosting.
lol people like me wouldn't be scratching their heads reading a thread which is all about this kernel but the kernel is no where to be found.
much appreciated guys,
Hi I am new to android. I decided to install CyanogenMod on my Indian sgy rooted and had stock rom with Touchwiz and android 2.3.6. So I got some instructions from here . Then I downloaded the file of around 120MB.I booted into recovery mode. I selected update from SD card and then selected CWM.zip I got from XDA thread. It entered the CWM and then I selected Format system, Clear cache and clear Dalvik cache. Then I selected the update from SD card and then selected the CM zip file of 120MB I had in my phone. It installed and then it showed no errors. After conformation I rebooted the phone. It showed Samsung Galaxy Y and then turned black with no Samsung logo. I thought it was doing something and then after 3 minutes I touched the screen it began to draw circles wherever I touched. I thought I bricked the phone. After two minutes I turned it off and then again got into recovery mode and then to CWM mode and got my phone back with Nandroid backup I had.
Was the phone installing and I interrupted it by touching it?
Is there any error on my installation steps?
Kindly reply me how to install this CM and tell me if you get the same and give me the link you used for installing CM
Apologies for poor english if you find any.
you installed cm9
to use cm9 you need to install whitexp kernel else you will have the track pad which you experienced
you should also know cm9 is not stable in this device - no network wifi data etc - all it does is boot
marcussmith2626 said:
you installed cm9
to use cm9 you need to install whitexp kernel else you will have the track pad which you experienced
you should also know cm9 is not stable in this device - no network wifi data etc - all it does is boot
Click to expand...
Click to collapse
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Xtreak said:
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Click to expand...
Click to collapse
no you will not get stock kernel back by restoring nandroid backup
to go back to stock rom/kernel you need to flash stock rom firmware via odin
This is because the kernels that support cm will format your system to ext - stock kernel does not support ext so your phone will not boot so you need to flash stock rom via odin to go back to stock
all roms including stock based cm7 and aosp are found in the dev section - read the op - full instructions are given there - if you flash a cm7 or aosp rom you will need to flash percys kernel first and reboot to recovery and format system data cache to remove mount errors
choose one that works best for you
marcussmith2626 said:
no you will not get stock kernel back by restoring nandroid backup
to go back to stock rom/kernel you need to flash stock rom firmware via odin
This is because the kernels that support cm will format your system to ext - stock kernel does not support ext so your phone will not boot so you need to flash stock rom via odin to go back to stock
all roms including stock based cm7 and aosp are found in the dev section - read the op - full instructions are given there - if you flash a cm7 or aosp rom you will need to flash percys kernel first and reboot to recovery and format system data cache to remove mount errors
choose one that works best for you
Click to expand...
Click to collapse
I will try them . Thanks for helping me out. The stock ROM are in hotfile which was shutdown I think. Any other mirrors or links to get the stock kernel and ROM?
Xtreak said:
I will try them . Thanks for helping me out. The stock ROM are in hotfile which was shutdown I think. Any other mirrors or links to get the stock kernel and ROM?
Click to expand...
Click to collapse
my sticky thread at the top of the dev section has them - please look through the dev section
here is link to my firmware thread
http://forum.xda-developers.com/showthread.php?t=2568853
marcussmith2626 said:
my sticky thread at the top of the dev section has them - please look through the dev section
here is link to my firmware thread
http://forum.xda-developers.com/showthread.php?t=2568853
Click to expand...
Click to collapse
Ok I will see them . Great work. Happy hacking
Xtreak said:
Thank you. Could you please guide me through any other ROM or thread that could
help me to install another rom. I am not asking for a best ROM. I am just asking a more
appropriate ROM that I could use as galaxy y is not officially supported by Cyanogenmod.
Also the developer of mod said to install kernel if I restore nandroid backup using CWM will I get stock kernel back.
please don't mistake me that I am asking the best rom.
Click to expand...
Click to collapse
I recomand you to install MiniRom Touchwiz http://forum.xda-developers.com/showthread.php?t=2385686
or Hyperion 8
http://forum.xda-developers.com/showthread.php?t=2457022
imElectronica said:
I recomand you to install MiniRom Touchwiz http://forum.xda-developers.com/showthread.php?t=2385686
or Hyperion 8
http://forum.xda-developers.com/showthread.php?t=2457022
Click to expand...
Click to collapse
I found the final build. I think its discontinued a few days ago correct me if I am wrong. I heard it has some wifi problems. Can we install it with stock kernel?
imElectronica said:
I recommend you to install (rest of quote removed)
Click to expand...
Click to collapse
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
marcussmith2626 said:
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
Click to expand...
Click to collapse
Sorry. Guess I can stop here. I downloaded hyperion 8 . Waiting for my phone to get charged.
marcussmith2626 said:
please dont turn this thread into a best rom style recommend roms thread - whats best for you maybe not best or recommended to someone else
Click to expand...
Click to collapse
I'm not telling about best....I express my opinion.....its depends upon u to use this..
---------- Post added at 11:24 AM ---------- Previous post was at 11:19 AM ----------
Xtreak said:
I found the final build. I think its discontinued a few days ago correct me if I am wrong. I heard it has some wifi problems. Can we install it with stock kernel?
Click to expand...
Click to collapse
Yes use mini rom with stock kernel....I use it for 6 month n no prob found....i use it with hellsfusion kernel n found wifi prob but it works smooth with stock kernel.....this is a stable one. this is my fav. rom i ever use.
I can give ABSOLUTLEY no gurantee!! All you do with your phone will be on your own. I'm not responsible if your phone will brick or whatever...
Attation! This kernel is for the I8200 variant ONLY... the I8190 is absolutley not compatible !!!
Kernel should be work also for I8200/I8200Q/I8200L-Variants, but can not be gurateed as the basis was I8200! If it works then a notice will be fine!
If you are not sure about the process, the data are important on your phone or you need it as a daily phone, then LET IT BEE, and wait for the messages that it is safe to use. Its important at the beginning that users with knowledge tried it at first !
Changelog:
12.02.2016: Long time ago, but now after a lot of investigating some new things comes up. Check what was done
05.01.2014: I try to work on the kernel over x-mas in my free time, but I must say that the source of samsung which was provided on opensource.samsung.com is not really funny stuff... there are so many coding errors, which was. not able for me to solve directly. So now I started to examine other kernel sources, and will try to port a more main.tained source to the i8200. From My point of view this will be the only way to produce an more accurate kernel for our device, and get the possibility to include also selinux what is needed for a kitkat-rom. Nevertheless, it is not easy to work on that stuff, because I'm not an expert on kernel work (but I learn every day more , so if you know someone with more kernel experiences, it would be very helpful to get a contact...
Baroni-V0.1 contains:
Basis of opensource from Samsung with some bugfixing
fixed recovery-boot-loop with a config-setting which must be used special in the Recovery zImage
Loglevel pushed down to minimum
Uber-Toolchain 4.9
set onDemand-Governor to standart. just to check how that works
start implementing SmartAssV2-Gonernor, but leave it inactive, due to some compile-errors.
bringing SELinux to work for future kernel releases if needed for > 4.4
Planned:
new govenors at the moment not established (will come later)
more other stuff (depending on learning-curve
Installation:
Install a recovery for safetyreasons (I prefer TWRP https://www.dropbox.com/s/d3rnfp3vabz9ee8/twrp_i8200_corrected.7z?dl=0
Read carefully the hints of the usage in the following firts post: http://forum.xda-developers.com/galaxy-s3-mini/general/s-iii-mini-ve-i8200-n-t2826565 (There also the needed Odin (3.09) can be get)
Make backups of the complete phone, and be sure that you know what you do!
Download the right Firmware for your phone from http://www.sammobile.com/firmwares/ (just to have a other safety fallback in your hand!)
Download the file, start odin as usual (all kies-tasks closed!)
extract the file, and put it to AP
put the phone in Downloadmode (Vol-down,Home-key and powerbutton), and connect the phone with PC
flash the kernel, and let the phone reboot
pray
If things go wrong, please give everytime the following information's:
what you did before
what exactly happened (its not easy to help if you say: it did not work )
which rom in which version, which recovery and which version of my Kernel you use
try to get a /proc/last_kmsg (if a unknowen reboot appears) and/or Logcat, Build prop, CPU info, Sysctl, Kmsg, Dmesg and send it to me (or as a attachment to the post) for further analyse (you can use that tool for it: https://play.google.com/store/apps/details?id=com.bassel.andylog )
Attention: First checks seem to be that I8200 (without N or L or Q) did not work atm.
Download:
kernel_i8200n-Baroni:
https://www.androidfilehost.com/?w=files&flid=47763
kernel_i8200n-Stock.7z (to getting back to stock kernel via Odin):
https://www.dropbox.com/s/xfhufcpxl5kxmue/kernel_i8200n-Stock.7z?dl=0
Recoverys (with fixed recovery boot loop):
https://www.androidfilehost.com/?w=files&flid=49834
There was a mistake in the initramfs. was corrected now. If you download the V0.7 yesterday, please dont use it... Try V0.8.
One question.
SolarPlexus said:
There was a mistake in the initramfs. was corrected now. If you download the V0.7 yesterday, please dont use it... Try V0.8.
Click to expand...
Click to collapse
My Friend.
Yesterday I tried to install its kernel but my phone did not start properly.
I wanted to do a restore from a backup that had done, but the recovery (TRWP) did not restore the data partition.
Is there any chance that I happen again the same with this version?
Danh23 said:
My Friend.
Yesterday I tried to install its kernel but my phone did not start properly.
I wanted to do a restore from a backup that had done, but the recovery (TRWP) did not restore the data partition.
Is there any chance that I happen again the same with this version?
Click to expand...
Click to collapse
Attention with TWRP-Recovery. Data-Partition restore seems to be not right. At the moment please did not use it, because it can delete your data-partition. We have to investigate it further! Other partitions seems to be ok, but its a good Idea if you copy your important data also manually to a other storage (like PC) while you trying things of this thread.
i install the kernel ans stuck into samsung logo.if i flash the stock kernel i will fix it?
stock kernel?can you upload it?
KwstPap said:
i install the kernel ans stuck into samsung logo.if i flash the stock kernel i will fix it?
stock kernel?can you upload it?
Click to expand...
Click to collapse
Did you made a backup with twrp (as described)? If yes, then make a restore only with boot marked in the list.
Otherwise, which version did you have? Plain n/l/q? Than I can make a package for Odin...
send with my Oneplus One (bacon) SlimKat Tapatalk
About the data recovery, use aroma FM to restore. Out worked for me
hahhhahaha i forgot it to take a backup hahaha .i reflashing the stock firmware... i Have i8200N
but why the kernel doesnt work on me?
KwstPap said:
hahhhahaha i forgot it to take a backup hahaha .i reflashing the stock firmware... i Have i8200N
but why the kernel doesnt work on me?
Click to expand...
Click to collapse
You are a funny guy... Flasching things without reading the guide is something like a other guy I know from kentucky fried movie (Danger-seeker)
Nevertheless, I added in first thread the stock kernel for i8200n to flash with odin.
SolarPlexus said:
You are a funny guy... Flasching things without reading the guide is something like a other guy I know from kentucky fried movie (Danger-seeker)
Nevertheless, I added in first thread the stock kernel for i8200n to flash with odin.
Click to expand...
Click to collapse
hahahahaha always forget to take a backup .but i am very stypid .i had a backup on my pc.hahah in one weak i have reflashing the stock formware 5 times and the root recovery and other staff again hahaha
thanks for the stok kernel
SolarPlexus said:
You are a funny guy... Flasching things without reading the guide is something like a other guy I know from kentucky fried movie (Danger-seeker)
Nevertheless, I added in first thread the stock kernel for i8200n to flash with odin.
Click to expand...
Click to collapse
¿which brings benefits to install this kernel?
RodsonBorja said:
¿which brings benefits to install this kernel?
Click to expand...
Click to collapse
Atm nothing... Its alpha and not working. Unfortunately I'm a little bit blocked by illness and x-mas and was not able to work on it... Maybe next week...
send with my Oneplus One (bacon) SlimKat Tapatalk
Hi to all followers of this thread.
Just to give an update: I try to work on the kernel over x-mas in my free time, but I must say that the source of samsung which was provided on opensource.samsung.com is not really funny stuff... there are so many coding errors, which was not able for me to solve directly. So now I started to examine other kernel sources, and will try to port a more maintained source to the i8200. From My point of view this will be the only way to produce an more accurate kernel for our device, and get the possebility to include also selinux what is needed for a kitkat-rom...
Nevertheless, it is not easy to work on that stuff, because I'm not an expert on kernel work (but I learn every day more , so if you know someone with more kernel experiences, it would be very helpful to invite him/her. To ask in forums (also in xda) is something what I do, but unfortunately the responding are not every time safe...
So I wish you all a happy new year, and lets work together to bring our device a little bit forward
SolarPlexus
Ask @dtrail1 he know how the kernel thing work.
Maybe he'll support you
VallNAr said:
Ask @dtrail1 he know how the kernel thing work.
Maybe he'll support you
Click to expand...
Click to collapse
Ask MARDON he made the kernel for Galaxy Ace - maybe he support Your work.
Any progress on the kernel? Is it on github?
Why does this not suport usb flash drives or can the function be ported
Gershy353
I think it must be activated on both sides. Kernel and ROM...
send with my Oneplus One (bacon) SlimKat Tapatalk
SolarPlexus said:
I think it must be activated on both sides. Kernel and ROM...
send with my Oneplus One (bacon) SlimKat Tapatalk
Click to expand...
Click to collapse
How is this done i have the sandisk dual flash drive but its useless on my device
Gershy353
Ah, you mean otg support, not sdcard seen as USB instead of mtp?
send with my Oneplus One (bacon) SlimKat Tapatalk