In Manila > Settings > Other, I have all the respective settings. However, I have only 2 with their icons. The rest are not. On the second screen capture, only Uploader is with its icon. How do I get their respective icons to be displayed. I have looked everywhere to no avail.
Help me please
Thank you.
Are your icons in settings showing correctly?
ypsmav said:
Are your icons in settings showing correctly?
Click to expand...
Click to collapse
Start>Settings icon are ok.
Those icons are controlled by manila files...
ai6908 said:
Those icons are controlled by manila files...
Click to expand...
Click to collapse
Hmmmm.. Beyond me!
Thanks anyway, ai.
I have the same issue so you're not the only one. I use a Touch Pro 2. I switched back to Manilla, and then to Energy ROM and the issue followed me.
I've been looking into every file and folder but had not find any solution yet.
I tried task 29 and reloading Energy ROM, that didn't work.
I tried Energy ROM and it too had the same issue - no icons in settings.
Related
The touch flow 3d programs tab uses the default crappy icons for the programs shortcuts, does any one know whether we can use our own slightly larger icons for these shortcuts?
Try TFL3DTABICONSV3.cab - I've installed them on the Touch HD and they work fine. Colour icons. Wish I knew who did them so I could attribute properly.
Edit: Oops. Too much haste reading your post. The above icons replace the TF3D tab icons, not those in the Programs tab.
AFW said:
Try TFL3DTABICONSV3.cab - I've installed them on the Touch HD and they work fine. Colour icons. Wish I knew who did them so I could attribute properly.
Edit: Oops. Too much haste reading your post. The above icons replace the TF3D tab icons, not those in the Programs tab.
Click to expand...
Click to collapse
Many thanks.... Just downloaded.
All I now need is the phone which should arrive tomorrow.
Beards
AFW said:
Try TFL3DTABICONSV3.cab - I've installed them on the Touch HD and they work fine. Colour icons. Wish I knew who did them so I could attribute properly.
Edit: Oops. Too much haste reading your post. The above icons replace the TF3D tab icons, not those in the Programs tab.
Click to expand...
Click to collapse
how does that make the tabs look? do you have a screenshot or just give us a description, thanx
Here's a screenie.
thanx mate
i still hope some one has an idea as to how we can use our own icons for the programs tab, not the tab itself but the actual icons for the programs
AFW said:
Try TFL3DTABICONSV3.cab - I've installed them on the Touch HD and they work fine. Colour icons. Wish I knew who did them so I could attribute properly.
Edit: Oops. Too much haste reading your post. The above icons replace the TF3D tab icons, not those in the Programs tab.
Click to expand...
Click to collapse
This looks to be from the Diamond forum, does it include an icon for the Stocks tab??
It doesn't include a colour icon for the Stocks tab, so it still uses the original b/w one.
Overall, a very neat little upgrade!!
nikki-m said:
It doesn't include a colour icon for the Stocks tab, so it still uses the original b/w one.
Overall, a very neat little upgrade!!
Click to expand...
Click to collapse
Yes, it works well sans the stock icon. I use this along with the NoTopCurtain and SemiTransparent_bottom_Bar and Pamas Transparent Slider. Provides a nicer look. Cheers.
Thanks AFW, have installed it and it looks much better than the original black.
regarding the topic of the thread, im not sure if its been discovered before but iv found a way to add your own icons in the programs.
Using resci registry editor or similur go to
HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher
You will notice that theres 23 folders in there
Now lets say you have atleast 1 program activated, the program details for that should be in folder "0", you will see in that folder that the path for the application is stated, you also notice that there is a string called "IconPath", put the path of the icon you want into that string and then save.
Move to a different tab (any other then programs) and then come back to the programs tab and you'l notice the icon has changed to your preference.
One slight issue is that the icons become really small, im looking into how that can be changed. Im asuming theres one of two solutions, either
1. Change the resolution of the icons
2. or set the size some how in the registry
(Im looking into it, and please post any findings you have in this thread)
Another discovery I made is that by copying one of the folders in HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher and then pasting it back into HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher with the next number 24 (there are only 23 folders, represeting 23 possible program links in the programs tab) and saving it, gives you another possible application link in the programs tab.
The only problem with that is when you select it and add an application it remains blank.
Hi..
I'm having some difficulties downloading this file. Is there an alternative download site or can someone kindly email it to me? Much appreciated.
http://rs553.rapidshare.com/files/150866782/TFL3DTABICONSV3.cab
I must say I'm a fan of TF3D. But personally, the mono-color scheme is not much fun to look at. So, I searched the web for some free icons and made this. I thought I'd share it with the xda community. My first contribution.
(Don't bother with the poll, I've made my decision already.)
Instructions:
1. Install cab (recommended that previous versions of my theme be uninstalled first)
2. Disable and re-enable TF3D to see the changes. To see changes in the dialer, you'll need to soft-reset.
3. Sprint users, please install my "Color TF3D-Sprint Patch.cab" on top of whichever one of my theme's version you chose. This will add the 2 icons for Sprint TV and Nav. Please see screenshot here.
If don't like it, just uninstall. Soft-reset. Back to normal.
Verizon users, have a look here.
Sprint users, have a look here.
Most devices have black as the default font color for the clock on the Home tab. If yours does not, check here.
FAQ - please read before asking any questions I'll be ignoring all queries covered in the FAQ.
Tip: for improved performance, use CFC Compression. Info here.
Release history
I'd gladly take suggestions and requests. Let me know if you have icons you would like me to use or if you don't like a particular change I made. Together, we can make the perfect theme!
Color TF3D 1.5.cab - Normal
Color TF3D 1.5-no top.cab - Transparent top curtain
Color TF3D 1.5-no bottom.cab - Transparent bottom curtain
Color TF3D 1.5-no top and bottom.cab - Transparent top and bottom curtains (This is the one used in the screenshots)
Color TF3D-Sprint Patch.cab - install this on top of one of the above cabs for icons for Sprint TV and Nav
For those of you who have switched to the official WinMo 6.5 ROM released by HTC or if you have Manila v2.1 with the weather clock, please see here for version 2.0.
Users of Manila 2.0 or 2.1 without the weather clock should stick with version 1.5 of my theme.
AT&T Tilt 2 users should also stick with version 1.5 of my theme. I've not skinned the AT&T tab icon. If you want me to skin it, one of you will have to send me the corresponding manila files...
Further development on this has halted. But I'll still continue to try to support it. Here for details.
Like my work? Please donate! Any amount appreciated! Thanks for supporting!
thx!!!great!
i just wnat to know...
i presume you used cfc-gui to change icons, but i cant find the tab icons in my manla files...ive just the manila icon\off...
could you help me please?
davidebeatrice said:
thx!!!great!
i just wnat to know...
i presume you used cfc-gui to change icons, but i cant find the tab icons in my manla files...ive just the manila icon\off...
could you help me please?
Click to expand...
Click to collapse
Yes, I used cfc-gui. The section under "manila\icon off" is "manila\icon preview". That's what you're looking for. If you don't see it, you probably didn't extract your full set of manila files.
Very nice!
Great job, but i've got the Vario5 and tmobile made their own icons and I'm not sure if this works on my version, did you test it?
ohyeahar said:
Yes, I used cfc-gui. The section under "manila\icon off" is "manila\icon preview". That's what you're looking for. If you don't see it, you probably didn't extract your full set of manila files.
Click to expand...
Click to collapse
thx...but...in "manila\icon preview" icons are 128x128 only...changing these icons i change the "active icons" on manila bar also?
davidebeatrice said:
thx...but...in "manila\icon preview" icons are 128x128 only...changing these icons i change the "active icons" on manila bar also?
Click to expand...
Click to collapse
The 64x64 icons in the "manila/icon off" section are the ones to amend for the tab selection bar.
Ertje88 said:
Very nice!
Great job, but i've got the Vario5 and tmobile made their own icons and I'm not sure if this works on my version, did you test it?
Click to expand...
Click to collapse
Only tested on my unlocked UK Touch Pro2. So, don't know if it'll work for you. Suggest you to backup your manila files and test it. This way, you can always revert back if anything goes wrong.
Thx a lot! Great work!
Could you make a cab file? thx
sas90850 said:
Could you make a cab file? thx
Click to expand...
Click to collapse
Sure, cab added. Please see 1st post.
I'd really like to try this out as it looks great but I'm a bit concerned because I would have no idea which Manila files to back up incase I wanted to change back. Will the cab now allow me to uninstall from the remove programs option and do I still need to turn of tf3d before installing it?
Sorry for all the questions
The tab isnt transparent, and the bottom is white below the tabs. help?
mattp94 said:
I'd really like to try this out as it looks great but I'm a bit concerned because I would have no idea which Manila files to back up incase I wanted to change back. Will the cab now allow me to uninstall from the remove programs option and do I still need to turn of tf3d before installing it?
Sorry for all the questions
Click to expand...
Click to collapse
Going to be honest. I've not actually tried to uninstall the cab. But since the manila files are in ROM, a soft reset should restore them if you do uninstall the cab.
To answer your question on which manila files to backup, you can find the list in the xml file if you "unzip" the cab. Alternatively and probably easier would be to be just back up all of them.
mac208x said:
The tab isnt transparent, and the bottom is white below the tabs. help?
Click to expand...
Click to collapse
Please check out the 1st post regarding the glass slider. Regarding the other problem, can you pls send me or post a screenshot? Don't know what you mean...
Are those niiiiiiiiiiiiiiiiiiiiiiiiice really really niiiiiiiiiiiiiice notification icons part of the package ? they are awesome!
StealthNet said:
Are those niiiiiiiiiiiiiiiiiiiiiiiiice really really niiiiiiiiiiiiiice notification icons part of the package ? they are awesome!
Click to expand...
Click to collapse
I probably wasn't being clear in the 1st post, so I apologize for any misunderstandings. The slider, clock, taskbar, and 1% battery driver are not included in my cab. You can get them if they suit your preference. The links to those threads are in the 1st post. I take no credit for them. 1st post is now amended to be more clear in this subject.
Btw, yes, they are indeed awesome...
ohyeahar said:
Going to be honest. I've not actually tried to uninstall the cab. But since the manila files are in ROM, a soft reset should restore them if you do uninstall the cab.
To answer your question on which manila files to backup, you can find the list in the xml file if you "unzip" the cab. Alternatively and probably easier would be to be just back up all of them.
Click to expand...
Click to collapse
Sorry, going to contradict myself here. I just tried to uninstall the cab. It works perfectly. No need to worry about screwing anything up if you install it and don't like it.
Looks great, thanks very much.
It seems that when the icon marked below is pressed, the original icon (i.e. not colored) shows up
wonghyf said:
It seems that when the icon marked below is pressed, the original icon (i.e. not colored) shows up
Click to expand...
Click to collapse
I've actually encountered the problem you described when I tried to install my cab onto my Diamond (which runs a ported version of TF3D2). The strange thing was, the problem mysteriously went away after a few minutes. All I can say is, try to disable and then enable TF3D. Or soft reset. If that doesn't work, try to install the cab again. Maybe the script accidently skipped a file…
I'm quite certain the cab works. Tested on my own TP2 purchased from UK and my friend's TP2 purchased from HK.
Wow !
Everything works, since I am a total noob, that's a bit fo a surpise to me !
Thanks everyone !
MobileMatt HERO TP2 Edition v0.1 WVGA-CDMA
Video Preview: http://www.youtube.com/watch?v=pDlAO9xpd8c
Changelog v0.1 >
* First release...
Known Issues:
* None
Credits:
* Thanks to everyone for their support
Install:
* Copy CAB file to device
* Disable TouchFlo 3D - Start > Settings > Today > Items
* Install CAB file to Main memory
* Soft reset if not told to do so
** NOTE ** This theme is only a graphic replacement for the stock Verizon (CDMA) TouchFlo 3D theme and does not add any other functionality.
I have only tested this out on the Verizon TouchPro 2 (*CDMA-WVGA*) but may work with other devices.
* reserved *
* reserved 2 *
Video Preview: http://www.youtube.com/watch?v=pDlAO9xpd8c
This looks really cool. Before I install it I would like to know if it will cleanly un-install if I wanted to, reverting me back to my original setup. I use a standard TP2.
funem said:
This looks really cool. Before I install it I would like to know if it will cleanly un-install if I wanted to, reverting me back to my original setup. I use a standard TP2.
Click to expand...
Click to collapse
I have done just that in creating this theme. Installed and un-installed multiple times without a problem. Remember to disable TF3D prior to doing so.
hi im trying to uninstall it and wont do so. it keeps saying " it has not uninstalled completely, would you like to remove from the install list" and i hit yes but it still stays there.. only thing that was removed was the wallpaper.. icons on the tabs are still there.. stock tmobile tp2
Hi just installed it and the clock numbers have changed as per the screenies but the background to the clock is transparent and the background to the main screen didn't change. The rest of it looks fantastic.
I uninstalled it and have notices that when you select wallpaper it no longer asks you if you "would like to use the default one" before you browse for another one. Other than that it seems to have uninstalled fine
Edit :- Out of interest, is it possible to have the theme with the original HTC clock ?
@noodles... did you disable touch flo before you uninstalled it ?
noodles2224 said:
hi im trying to uninstall it and wont do so. it keeps saying " it has not uninstalled completely, would you like to remove from the install list" and i hit yes but it still stays there.. only thing that was removed was the wallpaper.. icons on the tabs are still there.. stock tmobile tp2
Click to expand...
Click to collapse
Have you installed anything else with this theme? I have installed and un-installed multiple times without a problem.
funem said:
Hi just installed it and the clock numbers have changed as per the screenies but the background to the clock is transparent and the background to the main screen didn't change. The rest of it looks fantastic.
I uninstalled it and have notices that when you select wallpaper it no longer asks you if you "would like to use the default one" before you browse for another one. Other than that it seems to have uninstalled fine
Click to expand...
Click to collapse
What device did you install this on? If you were using a crystal flip clock or Non-Verizon setup, then this will only change the numbers. Verizon does not use a flip clock.
mchapman007 said:
What device did you install this on? If you were using a crystal flip clock or Non-Verizon setup, then this will only change the numbers. Verizon does not use a flip clock.
Click to expand...
Click to collapse
Thanks for the quick reply. Mine is a stock HTC European version. Is it possible to have it without changing the clock. Also the wallpaper on the clock screen did not change but the rest of the tabs had the new background. I guess this can be changed by manually chaning the wallpaper. Have you got the wallpaper as a seperate file ?
Thanks again.
Thanks for the quick reply. Mine is a stock HTC European version. Is it possible to have it without changing the clock. Also the wallpaper on the clock screen did not change but the rest of the tabs had the new background. I guess this can be changed by manually chaning the wallpaper. Have you got the wallpaper as a seperate file ?
Thanks again.
Click to expand...
Click to collapse
I would have to make a separate CAB without the clock files.. Wallpaper is attached.
Thanks for the wallpaper. Transparent clock or not, you did a fantastic job. If you ever get round to creating a cab without changing the clock I would be most grateful. Thanks again.
yea i have i installed HDWall Hero because the homescreen did not have the hero wallpaper but i uninstalled that, then i installed your theme again and then uninstalled and finally got it removed.. thank you
noodles2224 said:
yea i have i installed HDWall Hero because the homescreen did not have the hero wallpaper but i uninstalled that, then i installed your theme again and then uninstalled and finally got it removed.. thank you
Click to expand...
Click to collapse
Slightly off topic, but I usually find that if you try to uninstall something and you get the message that it was not completely uninstalled and then asks if you want to remove it from the list and you click "Yes", it remains in the list. But if you go to install it again, it goes through the usual process of "The old installation of "XYZ" will be removed first...etc". It will actually remove it and not install it again. Strange, but it works!
Nice theme btw! (as always)
O man this is great again, I love your theme work!
Could it be don get the clock working, or looking like, the Verison setup for the WWE version's as well?
Regards,
Bert
does this work with manila build 1922???
Hi,
Any chance to post download link?
Regards,
PS:>Looks very nice indeed...
binary_boy01 said:
Hi,
Any chance to post download link?
Regards,
PS:>Looks very nice indeed...
Click to expand...
Click to collapse
LINK
Hi, on Wm6.5 roms for the touch HD you can press and hold on the start menu items an move them arround but in the HD2 you can only send them to top. Thats is a really ugly to reorder lots of icons.
I think there must be a key in the registry to set this behaviour but cant find it.
Someone knows it?
deleted...
I use JWMD Icon Changer V1.9 beta for Windows Mobile 6.5 to change the order of the start menu items... Works well.
Hope this helps...
This is not in the registry. Its in a SYS file named gwes ithink. Only way to fix it is by flashing to cooked ROM or update from HTC.
...........................
dealer75 said:
As far as I know this works only in later revisions of the os build. Maybe your Touch HD has a newer one.
Click to expand...
Click to collapse
but how old cant it be? HD2 got one of the newest wm6.5 roms... From where the chefs got the newer version for the HD then???
Lukasss said:
I use JWMD Icon Changer V1.9 beta for Windows Mobile 6.5 to change the order of the start menu items... Works well.
Hope this helps...
Click to expand...
Click to collapse
Does JWMD work for anyone else on their HD2?
On my old phone both JWMD Icon Changer and Showaco reSTART worked great in arranging the icons. On the HD2 however, neither seems to work.
JWMD arranges most of the icons on my HD2, but it doesn't rearrange them all (like the settings icon, it appears randomly in the list) and the ones that it does rearrange don't stay where they are supposed to and move after a little while.
What has HTC done to the Start menu to make it different? Because rearranging icons worked great on my old phone with these same exact programs.
Shawn_230 said:
Does JWMD work for anyone else on their HD2?
On my old phone both JWMD Icon Changer and Showaco reSTART worked great in arranging the icons. On the HD2 however, neither seems to work.
JWMD arranges most of the icons on my HD2, but it doesn't rearrange them all (like the settings icon, it appears randomly in the list) and the ones that it does rearrange don't stay where they are supposed to and move after a little while.
What has HTC done to the Start menu to make it different? Because rearranging icons worked great on my old phone with these same exact programs.
Click to expand...
Click to collapse
I think that behaviour can be cause htc icons are created every time the phone reboots. There is a cab somewhere here (i think is in the tips thread) that disable the recreation of icons so after that you will have no problem. I hope that works
shagratt said:
I think that behaviour can be cause htc icons are created every time the phone reboots. There is a cab somewhere here (i think is in the tips thread) that disable the recreation of icons so after that you will have no problem. I hope that works
Click to expand...
Click to collapse
Thanks for the input, but I already solved the issue (by doing a hard reset, heh).
JWMD works great now though, and with some spiffy icons makes my HD2 almost perfect - the disorganized icons were really bugging me.
Alright, so I think I've exhausted nearly all ideas for changing these icons. I can't seem to be able to change:
-Office Mobile folder icon or app icons
-Setting's cpl icon
-Any other settings icons
I've tried the reg entries as described here:
http://forum.xda-developers.com/showthread.php?t=664109
And I've manually replaced the .png's in the sys folders (base dpi etc) and that was a no go.
I guess I'm not sure what else I can do lol maybe I'm doing something incorrectly :/
Regards
Smith
changing icons can become a headache and most of the times being icons from CPL i must to do a cab for change registries, maybe it works for you runing the cab in the customization
+ Que PPC said:
changing icons can become a headache and most of the times being icons from CPL i must to do a cab for change registries, maybe it works for you runing the cab in the customization
Click to expand...
Click to collapse
Alright I'll explore that idea a little bit, hadn't thought of it!
Thanks!
Regards
Smith
Alright so I tried that, but the cab fails to install every time. Any ideas why?
ok lets talk this on the icons rearrangement thread, share your cab bud