I did an extensive search to try and find if anyone built binutils to run native on android and came up empty. I did, however, find someone who claims to have gotten Fortran to compile and run on android (specificimpulses.blogspot.com/2011/01/my-android-speaks-fortran-yours-can-too.html) He seems to have problems at the linker phase. I was wondering what people thought about the possibility. I would like to mess around with arm assembler on my android device whilst out and about...
So this is awesome, I set the build and the host environment to arm-android-eabi and I magickally got out i686-elf binaries that run on my linux workstation...amazing! I didn't know that cirrus made a processor with the smarts to automagically execute arm-android-eabi target code when presented with it...
../binutils-2.19.1/configure --prefix=/opt/compilers/gcc/native-android --build=arm-android-eabi --host=arm-android-eabi --target=arm-android-eabi --with-sysroot=../android-ndk-r5/platforms/android-8/arch-arm
So in addition to that I tried to wipe my path clean and point only to the binutils and gcc under the ndk-toolchain directory but it gave me the infamous 'cannot create working executable'....wow? ya think, config?
Anyone know how to turn off the test for building working executables when cross compiling, or perhaps to point in the configure script options where to find crti.o which is what was missing at the link phase?
Strike that, I mean Via. my workstation uses a via processor, not that that is important here...
Success! Well, in as much as I was able to compile binaries of some of the binutils and run them on my g-tab. I haven't tried to assemble a piece of code and link it yet. What I did was use the info in android-ndk-r5/docs/STANDALONE-TOOLCHAIN.html
which suggested that I run:
$NDK/build/tools/make-standalone-toolchain.sh --platform=android-5 --install-dir=/tmp/my-android-toolchain
which created a standalone toolchain self enclosed. I then set path carefully so I was pointing to the toolchain directory's bins. Then I ran configure using
../binutils-2.19.1/configure --prefix=/root/android --host=arm-android-eabi --target=arm-android-eabi
and made a few comments to code--real hacks like casting &stat.time to a time_t * and changing #ifdef tests to force inclusion of the correct code. I also had to link:
ln -s /root/my-android-toolchain/bin/arm-linux-androideabi-ar /root/my-android-toolchain/arm-android-eabi-ar
just because I was tired and didn't want to f**k with the compile script to get it to point to the correct set of toolchain binaries. In the end, I copied over nm-new, ld-new, as-new, and strip-new to my gtab and ran them and got errors that I expected like:
as-new aa.s
Error: can't open aa.s for reading: No such file or directory. Indicating that at least gas was running native on my gtab...
Of course, that is a first tiny step....
Btb, I had to unzip into the /data directory on android for the executables to run. Ran them in a terminal emulator...
The following contains binaries, and instructions for use of an experimental newer toolchain than those included in the android pre-built package.
This is provided to allow existing linux kernel developers experiment with the updated version of GCC (besides the complicated building instructions the code just has a small patch for a known issue with android and 4.6.* otherwise is directly from GNU (see build information below)
The packages I'm also providing to help developers current on windows (With cygwin but no other virtual environment) to start exploring android Linux kernel development for their devices. (In addition to a OSX toolchain for more advanced mac users)
due to the slight differences between kernels on different devices this How To is intended to be used for advanced users who can adjust for the differences required for the devices specific kernel.
I may add additional guides to this thread if I find a need for them.
[size=+1]Binary Toolchains[/size]
I have two versions of a GCC-4.6.3 toolchain
1) For x86 linux: toolchain-4.6.3.tar.bz2 (Sha1: c8c57aba6ad92e9acddf29ba8620ba880be09a81)
2) For Cygwin (windows): toolchain-4.6.3.cygwin.tar.bz2 (Sha1: 6947e1c1ba95195019f542eb8ba0708667b63eca)
3) For OSX (mac/darwin): toolchain-4.6.3.darwin.tar.bz2 (Sha1: 9a977f0672863fdd9501383a6ad1e30723281f68)
[size=-1]> The linux version was built via this script: http://pastebin.com/b2dZ8YtG (or in the included toolchain_notes.txt)
> The cygwin/darwin version uses the same source however has a slightly modified script (see the included toolchain_notes.txt for the updated script)[/size]
[size=+1]System Requirements[/size]
Note I have a 64bit debian linux box, and a 64bit version of WIndows7 Pro running cygwin, while I believe these binaries ought to be compatible with all x86 linux and cygwin installs these have not been tested by a wide number of people yet.
> Linux users: If you have a working android build environment likely no additional requirements are needed. In addition you must build any kernel/android utilities from a case sensitive filesystem or disk image.
> OSx users: the cygwin packages will give you an idea of what is required, please also see the README in the tar.bz2 about manually installing elf.h
> Cygwin users: as its unlikely you have compiled a kernel with cygwin up to this point you may wish to ensure the following packages are installed (as well as any cygwin recommends to be used with them):
vim
vim-common
make
cmake
lzop
gcc
gcc-core
gcc-g++
wget
git
git-compleation
libncurses-devel
python
Cygwin users must also set their NTFS file partition to allow case sensitive files:
To do this open regedit and change:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\obcaseinsensitive
to 0
after this reboot and the NTFS kernel will allow cygwin to use case sensitive files (ie 'AbC' and 'aBc' as two different files)
[size=+1]Advanced Kernel Building Guide[/size]
Since may devices are slightly different this can only be a high level kernel building guide
Please ask for any specific directions from the current kernel maintainer.
To most people who have built kernels before this will look familiar, the most important part is preparing your local environment to use the new toolchain,
1) If you have not already download the tar.bz2 above, (pick the one for the computer you are preparing to build kernels on)
2) extract the file (for the sake of this guide I will assume it is extracted into a ~/android directory)
ie on cygwin you might:
mkdir -p ~/android
cd ~/android
tar -xjvf toolchain-4.6.3.cygwin.tar.bz2
Note: steps one and two are just properly installing the toolchain, you will not need
to repeat them to build a different kernel.
2.b) OSX Only: check elf.h
open ~/android/toolchain-4.6.3/README in a text editor and check if elf.h is installed, otherwise manually install it as per the readme
3) fetch your kernel source into the ~/android directory and change into the
source codes root directory
(this can be via a git repo or tarball)
example if you wanted my ACER a100/a500 source you might run:
git clone git://github.com/ezterry/AcerTabKernel.git
cd AcerTabKernel
change this to match the source you are fetching
4) In the root directory of the kernel source (~/android/AcerTabKernel in the about a100/a500 example) update the environment for the cross compiler
add the toolchain to your path:
export PATH=$HOME/android/toolchain-4.6.3/bin:$PATH
set the cross compile:
export ARCH=arm
export CROSS_COMPILE=arm-linux-androideabi-
export KERNEL_DIR=`pwd`
(this will need to be done once for each terminal you use to run any of the following make commands)
5) Grab your configuration
From the device:
adb pull /proc/config.gz
gzip -dc config.gz > .config
or from a prepared configuration if it's included in your code base by running
make _defconfig
example for the a100/a500 code base is 'make vangogh_defconfig' for the a100 and 'make picasso_defconfig' for the a500
6) Customize configuration
just run menuconfig and use the UI to update settings
make menuconfig
7) building the kernel (zImage)
This is normal at this point with 'make -j'
so for a quad core CPU you can run
make -j5
(note: the wrong number in the -j argument will not harm the build but may slow down the building process by either using too few threads or needing to keep track of too many)
8) If it worked you will now have the kernel in arch/arm/boot/zImage
this can be injected into the boot.img (as the kernel, using an existing ramdisk) as is
If it failed for your kernel your kernel source may need one of the common patches
9) Building modules
the following will prepare the modules in subdirectory mod:
make modules
rm -rf mod
mkdir mod
cp `find ./ | grep .ko$` modules.order mod/
After these commands [if no errors] you can simply copy the contents of mod/ to /system/lib/modules on your device, note it is recommended usually to remove the existing contents of /system/lib/modules unless there is a closed source module required from the previous build despite the new kernel.
[size=+1]Common Patches Required[/size]
If your kernel has not been built for the new toolchain or on cygwin before you may require some of these common patchs: (I've thus far only tested this on my Acer A100/A500 source)
wireless/bcm4329 for GCC-4.6.3:
https://github.com/ezterry/AcerTabKernel/commit/123f32e27e2c74f1c1789ae5d6d5a1c04e1e264c
linux kernel module patch for cygwin (broken elf.h):
https://github.com/ezterry/AcerTabKernel/commit/220db49593cf6b9f3b556e2f4b75b2f6d3ff556c
Error compiling security/smc/bridge_pub2sec.S (I required the cygwin elf patch and this patch to build the Franco galaxy nexus kernel)
0001-Fix-build-error-with-4.6.3-toolchain-smc-0.patch
(use 'git am 0001-Fix-build-error-with-4.6.3-toolchain-smc-0.patch' to apply)
OSX stat patches (fixes errors between GNU and BSD stat):
https://github.com/ezterry/AcerTabKernel/commit/0c49df3cc1a05a0ccd98201511cdc0534aaeb35a
Errors loading newly built modules (modules appear to build cleanly but wont install):
simply add -fno-pic to CFLAGS_MODULE
https://github.com/ezterry/AcerTabKernel/commit/c5ed0fcb014d36936a86ad253f15af43de2f644a
(I can add others here if highlighted to me, and as I find them)
[size=+1]Other Toolchain uses[/size]
The linux toolchain can be used to build android components, however this requires various manipulation to the android /build git repository as currently various other toolchains have hard coded paths into the prebuilt repo. If you intend to incorporate this into your build it may be best to inject the toolchain into your prebuilt repo rather than expect your users to download the links above, ensure to keep the compile notes as it explains how to get the source code to the toolchains)
On cygwin/osx it may also be possible to build android applications however I've not yet tested this as the scripts to make a proper build are complex when attempted outside the android build tree.
Excellent!!! thanks Man!!! Has been looking for one of these
Added in the OSX version of the toolchain (and some related patches)
Also if you are having problems with your modules built with this toolchain a CFLAG fixes it. (see note in common patches)
FINALLY!!! Great Instructions followed them to the T and BAM got my kernel compiled!!!
wow your toolchain is so small, many thanks, just compiled a kernel for my LG P500 gonna test it, thanks again
Bookmarked for testing when I wake up...
I can almost put: "Building under Windows is not currently supported." (quote from google), unofficially at least, out of my mind...
I have been spoiled by Windows for far too long I fear, my attempt for this last week at getting Linux setup and building CM9 has been nothing but a complete FAILURE, too many single line entrys for different distributions/package combo's, commands I dont know and cant find because of wildcard portions of them and lack of understanding, and not enough scripts like the wonderful Compile CM9 script someone put up (cant run it because all the pre-req's arent setup).
Good god Ill be jumping for joy if this works tomorrow on WinBlows!
EDIT: never mind, problem solved, what I need to know now won't be solved here
I wish i knew how to go about doing this..
Thanks
Thanks For ........... i Really need It .........
Hammerfest said:
Bookmarked for testing when I wake up...
I can almost put: "Building under Windows is not currently supported." (quote from google), unofficially at least, out of my mind...
I have been spoiled by Windows for far too long I fear, my attempt for this last week at getting Linux setup and building CM9 has been nothing but a complete FAILURE, too many single line entrys for different distributions/package combo's, commands I dont know and cant find because of wildcard portions of them and lack of understanding, and not enough scripts like the wonderful Compile CM9 script someone put up (cant run it because all the pre-req's arent setup).
Good god Ill be jumping for joy if this works tomorrow on WinBlows!
Click to expand...
Click to collapse
If you succeed tell me how to do it in a more familiar way
I get errors regading the processor not being supported?
brfield said:
I get errors regading the processor not being supported?
Click to expand...
Click to collapse
Sorry I can't support devs that have not learned cut copy and paste.
You probably forgot to export some of the environment variables or are just trying to run a arm binary on your PC and or a x86 binary on your arm device.
But why am I guessing? Why don't we know what you tried to run and what the actual text of the error was.. what type of kernel you tried to build, what you are running?
These packages are for developers if you feel like using them its time to learn to how to trouble shoot a problem and write a ticket to explain said problem clearly to others with at least some information to give us a chance to understand.
Sent from my Galaxy Nexus using Tapatalk 2
Great guide. Have the bcm4329 wireless module, so followed the tips and everything compiled and works!
Thanks!
one question,how to compiled android kernel with -O3 optimization?
jxxhwy said:
one question,how to compiled android kernel with -O3 optimization?
Click to expand...
Click to collapse
Um, in general its recommended you don't:
-O3 is not recommended for the kernel as many low level parts require the assembly code generated to remain as is and not be optimized as will be by some of the options -O3 enables thus likely reducing the stability of your kernel.
---
That said the menuconfig has an option to optimize for size (-Os) if enabled else -O2
For other optimization (including tuning for your cpu) you can add them to the CFLAGS_KERNEL/CFLAGS_MODULE in the make file.)
For -O3 like functionality you could add the increment to the line:
-finline-functions, -funswitch-loops, -fpredictive-commoning, -fgcse-after-reload, -ftreel-vectorize, -ftree-partial-pre and -fipa-cp-clone
-Ofast is -O3 with -ffast-math as well
If you do build with all the -O3 or-Ofast options ensure you test the kernel for stability and run some benchmarks. (as it may not actually be faster depending on the cache misses)
The first option I'd start pruning was the one mentioned in my reference below -fgcse-after-reload.
If you really insist on -O3 rather than just adding the optimization you want that are not in O2,it can be added also in the Makefile where the configure flag is checked and its added to KBUILD_CFLAGS
Obviously all and any of this is at your own risk, anything that breaks you have to find a way to fix it.
Reference:
Gcc optimize options:
http://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
Talk of O3 and the kernel (not android specific)
http://unix.stackexchange.com/questions/1597/compiling-gnu-linux-with-o3-optimization
ezterry,thank you very much!
I want to build cm9 kernel using toolchain 4.6.3.
How to replace the default GCC 4.4.3 to 4.6.3 version?
BTW,I use the way -- make bootimage
jxxhwy said:
ezterry,thank you very much!
I want to build cm9 kernel using toolchain 4.6.3.
How to replace the default GCC 4.4.3 to 4.6.3 version?
BTW,I use the way -- make bootimage
Click to expand...
Click to collapse
If you are asking in a cm9 build tree.. its a pain, best is to update the cm kernel makefile to point the build chain temporarily.
If you mean just to compile by hand as described in the op
Once the kernel is compiled find an anykernel update.zip or manually use mkbootimg or fastboot to merge it with the ram disk. Cm9 targets mkbootimg and unpackbootimg (if I'm not mistaken) will build the applications to unpack your current (or the default cm9) boot image and re-create them with your custom kernel built from hand.
Now,I runing script file:
#Let's make sure the environment is clean and ready to compile the kernel
echo "Cleaning house!!"
make mrproper
echo "House cleaned, lets build a kernel!!!"
#
# Lets set the kernel defconfig
echo "defconfig = cyanogenmod_iprj_defconfig"
make ARCH=arm cyanogenmod_iprj_defconfig
#
# Let's build a kernel
echo "Now compiling kernel, go get a soda! "
ARCH=arm CROSS_COMPILE=~/Android/sourcecm9/cm9/toolchain-4.6.3/bin/arm-linux-androideabi- make zImage -j4
#
if [ -f arch/arm/boot/zImage ]; then
echo "Plague has been compiled!!! You can find it in arch/arm/boot/zImage"
else
echo "Kernel did not compile, please check for errors!!"
fi
but,I got some error output:
/home/xxx/cm9/toolchain-4.6.3/bin/arm-linux-androideabi-ld: cannot find usr/initramfs_data.o: No such file or directory
thanks again!!!
I think that means there is an issue with your config..
Most android kernels require initramfs, but don't specify a file, as its provided by the bootloader.. However in your case it is trying to embed it into the kernel.
Sent from my A500 using Tapatalk 2
ezterry said:
I think that means there is an issue with your config..
Most android kernels require initramfs, but don't specify a file, as its provided by the bootloader.. However in your case it is trying to embed it into the kernel.
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
issue has been resolved by myslef.Thanks for your time.
Samsung Galaxy Grand Duos Oreo Kernel Source
download link-> bottom of the thread.
Linux kernel release 3.x <http://kernel.org/>
These are the release notes for Linux version 3. Read them carefully,
as they tell you what this is all about, explain how to install the
kernel, and what to do if something goes wrong!!
WHAT IS LINUX?
Linux is a clone of the operating system Unix, written from scratch by
Linus Torvalds with assistance from a loosely-knit team of hackers across
the Net. It aims towards POSIX and Single UNIX Specification compliance.
It has all the features you would expect in a modern fully-fledged Unix,
including true multitasking, virtual memory, shared libraries, demand
loading, shared copy-on-write executables, proper memory management,
and multistack networking including IPv4 and IPv6.
It is distributed under the GNU General Public License - see the
accompanying COPYING file for more details.
ON WHAT HARDWARE DOES IT RUN?
Although originally developed first for 32-bit x86-based PCs (386 or higher),
today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and
UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell,
IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS,
Xtensa, Tilera TILE, AVR32 and Renesas M32R architectures.
Linux is easily portable to most general-purpose 32- or 64-bit architectures
as long as they have a paged memory management unit (PMMU) and a port of the
GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has
also been ported to a number of architectures without a PMMU, although
functionality is then obviously somewhat limited.
Linux has also been ported to itself. You can now run the kernel as a
userspace application - this is called UserMode Linux (UML).
DOCUMENTATION:
- There is a lot of documentation available both in electronic form on
the Internet and in books, both Linux-specific and pertaining to
general UNIX questions. I'd recommend looking into the documentation
subdirectories on any Linux FTP site for the LDP (Linux Documentation
Project) books. This README is not meant to be documentation on the
system: there are much better sources available.
- There are various README files in the Documentation/ subdirectory:
these typically contain kernel-specific installation notes for some
drivers for example. See Documentation/00-INDEX for a list of what
is contained in each file. Please read the Changes file, as it
contains information about the problems, which may result by upgrading
your kernel.
- The Documentation/DocBook/ subdirectory contains several guides for
kernel developers and users. These guides can be rendered in a
number of formats: PostScript (.ps), PDF, HTML, & man-pages, among others.
After installation, "make psdocs", "make pdfdocs", "make htmldocs",
or "make mandocs" will render the documentation in the requested format.
INSTALLING the kernel source:
- If you install the full sources, put the kernel tarball in a
directory where you have permissions (eg. your home directory) and
unpack it:
gzip -cd linux-3.X.tar.gz | tar xvf -
or
bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
Replace "XX" with the version number of the latest kernel.
Do NOT use the /usr/src/linux area! This area has a (usually
incomplete) set of kernel headers that are used by the library header
files. They should match the library, and not get messed up by
whatever the kernel-du-jour happens to be.
- You can also upgrade between 3.x releases by patching. Patches are
distributed in the traditional gzip and the newer bzip2 format. To
install by patching, get all the newer patch files, enter the
top level directory of the kernel source (linux-3.x) and execute:
gzip -cd ../patch-3.x.gz | patch -p1
or
bzip2 -dc ../patch-3.x.bz2 | patch -p1
(repeat xx for all versions bigger than the version of your current
source tree, _in_order_) and you should be ok. You may want to remove
the backup files (xxx~ or xxx.orig), and make sure that there are no
failed patches (xxx# or xxx.rej). If there are, either you or me has
made a mistake.
Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
(also known as the -stable kernels) are not incremental but instead apply
directly to the base 3.x kernel. Please read
Documentation/applying-patches.txt for more information.
Alternatively, the script patch-kernel can be used to automate this
process. It determines the current kernel version and applies any
patches found.
linux/scripts/patch-kernel linux
The first argument in the command above is the location of the
kernel source. Patches are applied from the current directory, but
an alternative directory can be specified as the second argument.
- If you are upgrading between releases using the stable series patches
(for example, patch-3.x.y), note that these "dot-releases" are
not incremental and must be applied to the 3.x base tree. For
example, if your base kernel is 3.0 and you want to apply the
3.0.3 patch, you do not and indeed must not first apply the
3.0.1 and 3.0.2 patches. Similarly, if you are running kernel
version 3.0.2 and want to jump to 3.0.3, you must first
reverse the 3.0.2 patch (that is, patch -R) _before_ applying
the 3.0.3 patch.
You can read more on this in Documentation/applying-patches.txt
- Make sure you have no stale .o files and dependencies lying around:
cd linux
make mrproper
You should now have the sources correctly installed.
SOFTWARE REQUIREMENTS
Compiling and running the 3.x kernels requires up-to-date
versions of various software packages. Consult
Documentation/Changes for the minimum version numbers required
and how to get updates for these packages. Beware that using
excessively old versions of these packages can cause indirect
errors that are very difficult to track down, so don't assume that
you can just update packages when obvious problems arise during
build or operation.
BUILD directory for the kernel:
When compiling the kernel all output files will per default be
stored together with the kernel source code.
Using the option "make O=output/dir" allow you to specify an alternate
place for the output files (including .config).
Example:
kernel source code: /usr/src/linux-3.N
build directory: /home/name/build/kernel
To configure and build the kernel use:
cd /usr/src/linux-3.N
make O=/home/name/build/kernel menuconfig
make O=/home/name/build/kernel
sudo make O=/home/name/build/kernel modules_install install
Please note: If the 'O=output/dir' option is used then it must be
used for all invocations of make.
CONFIGURING the kernel:
Do not skip this step even if you are only upgrading one minor
version. New configuration options are added in each release, and
odd problems will turn up if the configuration files are not set up
as expected. If you want to carry your existing configuration to a
new version with minimal work, use "make oldconfig", which will
only ask you for the answers to new questions.
- Alternate configuration commands are:
"make config" Plain text interface.
"make menuconfig" Text based color menus, radiolists & dialogs.
"make nconfig" Enhanced text based color menus.
"make xconfig" X windows (Qt) based configuration tool.
"make gconfig" X windows (Gtk) based configuration tool.
"make oldconfig" Default all questions based on the contents of
your existing ./.config file and asking about
new config symbols.
"make silentoldconfig"
Like above, but avoids cluttering the screen
with questions already answered.
Additionally updates the dependencies.
"make defconfig" Create a ./.config file by using the default
symbol values from either arch/$ARCH/defconfig
or arch/$ARCH/configs/${PLATFORM}_defconfig,
depending on the architecture.
"make ${PLATFORM}_defconfig"
Create a ./.config file by using the default
symbol values from
arch/$ARCH/configs/${PLATFORM}_defconfig.
Use "make help" to get a list of all available
platforms of your architecture.
"make allyesconfig"
Create a ./.config file by setting symbol
values to 'y' as much as possible.
"make allmodconfig"
Create a ./.config file by setting symbol
values to 'm' as much as possible.
"make allnoconfig" Create a ./.config file by setting symbol
values to 'n' as much as possible.
"make randconfig" Create a ./.config file by setting symbol
values to random values.
You can find more information on using the Linux kernel config tools
in Documentation/kbuild/kconfig.txt.
NOTES on "make config":
- having unnecessary drivers will make the kernel bigger, and can
under some circumstances lead to problems: probing for a
nonexistent controller card may confuse your other controllers
- compiling the kernel with "Processor type" set higher than 386
will result in a kernel that does NOT work on a 386. The
kernel will detect this on bootup, and give up.
- A kernel with math-emulation compiled in will still use the
coprocessor if one is present: the math emulation will just
never get used in that case. The kernel will be slightly larger,
but will work on different machines regardless of whether they
have a math coprocessor or not.
- the "kernel hacking" configuration details usually result in a
bigger or slower kernel (or both), and can even make the kernel
less stable by configuring some routines to actively try to
break bad code to find kernel problems (kmalloc()). Thus you
should probably answer 'n' to the questions for
"development", "experimental", or "debugging" features.
COMPILING the kernel:
- Make sure you have at least gcc 3.2 available.
For more information, refer to Documentation/Changes.
Please note that you can still run a.out user programs with this kernel.
- Do a "make" to create a compressed kernel image. It is also
possible to do "make install" if you have lilo installed to suit the
kernel makefiles, but you may want to check your particular lilo setup first.
To do the actual install you have to be root, but none of the normal
build should require that. Don't take the name of root in vain.
- If you configured any of the parts of the kernel as `modules', you
will also have to do "make modules_install".
- Verbose kernel compile/build output:
Normally the kernel build system runs in a fairly quiet mode (but not
totally silent). However, sometimes you or other kernel developers need
to see compile, link, or other commands exactly as they are executed.
For this, use "verbose" build mode. This is done by inserting
"V=1" in the "make" command. E.g.:
make V=1 all
To have the build system also tell the reason for the rebuild of each
target, use "V=2". The default is "V=0".
- Keep a backup kernel handy in case something goes wrong. This is
especially true for the development releases, since each new release
contains new code which has not been debugged. Make sure you keep a
backup of the modules corresponding to that kernel, as well. If you
are installing a new kernel with the same version number as your
working kernel, make a backup of your modules directory before you
do a "make modules_install".
Alternatively, before compiling, use the kernel config option
"LOCALVERSION" to append a unique suffix to the regular kernel version.
LOCALVERSION can be set in the "General Setup" menu.
- In order to boot your new kernel, you'll need to copy the kernel
image (e.g. .../linux/arch/i386/boot/bzImage after compilation)
to the place where your regular bootable kernel is found.
- Booting a kernel directly from a floppy without the assistance of a
bootloader such as LILO, is no longer supported.
If you boot Linux from the hard drive, chances are you use LILO which
uses the kernel image as specified in the file /etc/lilo.conf. The
kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
/boot/bzImage. To use the new kernel, save a copy of the old image
and copy the new image over the old one. Then, you MUST RERUN LILO
to update the loading map!! If you don't, you won't be able to boot
the new kernel image.
Reinstalling LILO is usually a matter of running /sbin/lilo.
You may wish to edit /etc/lilo.conf to specify an entry for your
old kernel image (say, /vmlinux.old) in case the new one does not
work. See the LILO docs for more information.
After reinstalling LILO, you should be all set. Shutdown the system,
reboot, and enjoy!
If you ever need to change the default root device, video mode,
ramdisk size, etc. in the kernel image, use the 'rdev' program (or
alternatively the LILO boot options when appropriate). No need to
recompile the kernel to change these parameters.
- Reboot with the new kernel and enjoy.
IF SOMETHING GOES WRONG:
- If you have problems that seem to be due to kernel bugs, please check
the file MAINTAINERS to see if there is a particular person associated
with the part of the kernel that you are having trouble with. If there
isn't anyone listed there, then the second best thing is to mail
them to me ([email protected]), and possibly to any other
relevant mailing-list or to the newsgroup.
- In all bug-reports, *please* tell what kernel you are talking about,
how to duplicate the problem, and what your setup is (use your common
sense). If the problem is new, tell me so, and if the problem is
old, please try to tell me when you first noticed it.
- If the bug results in a message like
unable to handle kernel paging request at address C0000010
Oops: 0002
EIP: 0010:XXXXXXXX
eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx
esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx
ds: xxxx es: xxxx fs: xxxx gs: xxxx
Pid: xx, process nr: xx
xx xx xx xx xx xx xx xx xx xx
or similar kernel debugging information on your screen or in your
system log, please duplicate it *exactly*. The dump may look
incomprehensible to you, but it does contain information that may
help debugging the problem. The text above the dump is also
important: it tells something about why the kernel dumped code (in
the above example it's due to a bad kernel pointer). More information
on making sense of the dump is in Documentation/oops-tracing.txt
- If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
as is, otherwise you will have to use the "ksymoops" program to make
sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred).
This utility can be downloaded from
ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ .
Alternately you can do the dump lookup by hand:
- In debugging dumps like the above, it helps enormously if you can
look up what the EIP value means. The hex value as such doesn't help
me or anybody else very much: it will depend on your particular
kernel setup. What you should do is take the hex value from the EIP
line (ignore the "0010:"), and look it up in the kernel namelist to
see which kernel function contains the offending address.
To find out the kernel function name, you'll need to find the system
binary associated with the kernel that exhibited the symptom. This is
the file 'linux/vmlinux'. To extract the namelist and match it against
the EIP from the kernel crash, do:
nm vmlinux | sort | less
This will give you a list of kernel addresses sorted in ascending
order, from which it is simple to find the function that contains the
offending address. Note that the address given by the kernel
debugging messages will not necessarily match exactly with the
function addresses (in fact, that is very unlikely), so you can't
just 'grep' the list: the list will, however, give you the starting
point of each kernel function, so by looking for the function that
has a starting address lower than the one you are searching for but
is followed by a function with a higher address you will find the one
you want. In fact, it may be a good idea to include a bit of
"context" in your problem report, giving a few lines around the
interesting one.
If you for some reason cannot do the above (you have a pre-compiled
kernel image or similar), telling me as much about your setup as
possible will help. Please read the REPORTING-BUGS document for details.
- Alternately, you can use gdb on a running kernel. (read-only; i.e. you
cannot change values or set break points.) To do this, first compile the
kernel with -g; edit arch/i386/Makefile appropriately, then do a "make
clean". You'll also need to enable CONFIG_PROC_FS (via "make config").
After you've rebooted with the new kernel, do "gdb vmlinux /proc/kcore".
You can now use all the usual gdb commands. The command to look up the
point where your system crashed is "l *0xXXXXXXXX". (Replace the XXXes
with the EIP value.)
gdb'ing a non-running kernel currently fails because gdb (wrongly)
disregards the starting offset for which the kernel is compiled.
Download.
OREO KERNEL SOURCE 3.x
credits:-
@osas514
@GHsR
vasanth36 said:
Samsung Galaxy Grand Duos Oreo Kernel Source
download link-> bottom of the thread.
Linux kernel release 3.x <http://kernel.org/>
These are the release notes for Linux version 3. Read them carefully,
as they tell you what this is all about, explain how to install the
kernel, and what to do if something goes wrong!!
WHAT IS LINUX?
Linux is a clone of the operating system Unix, written from scratch by
Linus Torvalds with assistance from a loosely-knit team of hackers across
the Net. It aims towards POSIX and Single UNIX Specification compliance.
It has all the features you would expect in a modern fully-fledged Unix,
including true multitasking, virtual memory, shared libraries, demand
loading, shared copy-on-write executables, proper memory management,
and multistack networking including IPv4 and IPv6.
It is distributed under the GNU General Public License - see the
accompanying COPYING file for more details.
ON WHAT HARDWARE DOES IT RUN?
Although originally developed first for 32-bit x86-based PCs (386 or higher),
today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and
UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell,
IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS,
Xtensa, Tilera TILE, AVR32 and Renesas M32R architectures.
Linux is easily portable to most general-purpose 32- or 64-bit architectures
as long as they have a paged memory management unit (PMMU) and a port of the
GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has
also been ported to a number of architectures without a PMMU, although
functionality is then obviously somewhat limited.
Linux has also been ported to itself. You can now run the kernel as a
userspace application - this is called UserMode Linux (UML).
DOCUMENTATION:
- There is a lot of documentation available both in electronic form on
the Internet and in books, both Linux-specific and pertaining to
general UNIX questions. I'd recommend looking into the documentation
subdirectories on any Linux FTP site for the LDP (Linux Documentation
Project) books. This README is not meant to be documentation on the
system: there are much better sources available.
- There are various README files in the Documentation/ subdirectory:
these typically contain kernel-specific installation notes for some
drivers for example. See Documentation/00-INDEX for a list of what
is contained in each file. Please read the Changes file, as it
contains information about the problems, which may result by upgrading
your kernel.
- The Documentation/DocBook/ subdirectory contains several guides for
kernel developers and users. These guides can be rendered in a
number of formats: PostScript (.ps), PDF, HTML, & man-pages, among others.
After installation, "make psdocs", "make pdfdocs", "make htmldocs",
or "make mandocs" will render the documentation in the requested format.
INSTALLING the kernel source:
- If you install the full sources, put the kernel tarball in a
directory where you have permissions (eg. your home directory) and
unpack it:
gzip -cd linux-3.X.tar.gz | tar xvf -
or
bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
Replace "XX" with the version number of the latest kernel.
Do NOT use the /usr/src/linux area! This area has a (usually
incomplete) set of kernel headers that are used by the library header
files. They should match the library, and not get messed up by
whatever the kernel-du-jour happens to be.
- You can also upgrade between 3.x releases by patching. Patches are
distributed in the traditional gzip and the newer bzip2 format. To
install by patching, get all the newer patch files, enter the
top level directory of the kernel source (linux-3.x) and execute:
gzip -cd ../patch-3.x.gz | patch -p1
or
bzip2 -dc ../patch-3.x.bz2 | patch -p1
(repeat xx for all versions bigger than the version of your current
source tree, _in_order_) and you should be ok. You may want to remove
the backup files (xxx~ or xxx.orig), and make sure that there are no
failed patches (xxx# or xxx.rej). If there are, either you or me has
made a mistake.
Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
(also known as the -stable kernels) are not incremental but instead apply
directly to the base 3.x kernel. Please read
Documentation/applying-patches.txt for more information.
Alternatively, the script patch-kernel can be used to automate this
process. It determines the current kernel version and applies any
patches found.
linux/scripts/patch-kernel linux
The first argument in the command above is the location of the
kernel source. Patches are applied from the current directory, but
an alternative directory can be specified as the second argument.
- If you are upgrading between releases using the stable series patches
(for example, patch-3.x.y), note that these "dot-releases" are
not incremental and must be applied to the 3.x base tree. For
example, if your base kernel is 3.0 and you want to apply the
3.0.3 patch, you do not and indeed must not first apply the
3.0.1 and 3.0.2 patches. Similarly, if you are running kernel
version 3.0.2 and want to jump to 3.0.3, you must first
reverse the 3.0.2 patch (that is, patch -R) _before_ applying
the 3.0.3 patch.
You can read more on this in Documentation/applying-patches.txt
- Make sure you have no stale .o files and dependencies lying around:
cd linux
make mrproper
You should now have the sources correctly installed.
SOFTWARE REQUIREMENTS
Compiling and running the 3.x kernels requires up-to-date
versions of various software packages. Consult
Documentation/Changes for the minimum version numbers required
and how to get updates for these packages. Beware that using
excessively old versions of these packages can cause indirect
errors that are very difficult to track down, so don't assume that
you can just update packages when obvious problems arise during
build or operation.
BUILD directory for the kernel:
When compiling the kernel all output files will per default be
stored together with the kernel source code.
Using the option "make O=output/dir" allow you to specify an alternate
place for the output files (including .config).
Example:
kernel source code: /usr/src/linux-3.N
build directory: /home/name/build/kernel
To configure and build the kernel use:
cd /usr/src/linux-3.N
make O=/home/name/build/kernel menuconfig
make O=/home/name/build/kernel
sudo make O=/home/name/build/kernel modules_install install
Please note: If the 'O=output/dir' option is used then it must be
used for all invocations of make.
CONFIGURING the kernel:
Do not skip this step even if you are only upgrading one minor
version. New configuration options are added in each release, and
odd problems will turn up if the configuration files are not set up
as expected. If you want to carry your existing configuration to a
new version with minimal work, use "make oldconfig", which will
only ask you for the answers to new questions.
- Alternate configuration commands are:
"make config" Plain text interface.
"make menuconfig" Text based color menus, radiolists & dialogs.
"make nconfig" Enhanced text based color menus.
"make xconfig" X windows (Qt) based configuration tool.
"make gconfig" X windows (Gtk) based configuration tool.
"make oldconfig" Default all questions based on the contents of
your existing ./.config file and asking about
new config symbols.
"make silentoldconfig"
Like above, but avoids cluttering the screen
with questions already answered.
Additionally updates the dependencies.
"make defconfig" Create a ./.config file by using the default
symbol values from either arch/$ARCH/defconfig
or arch/$ARCH/configs/${PLATFORM}_defconfig,
depending on the architecture.
"make ${PLATFORM}_defconfig"
Create a ./.config file by using the default
symbol values from
arch/$ARCH/configs/${PLATFORM}_defconfig.
Use "make help" to get a list of all available
platforms of your architecture.
"make allyesconfig"
Create a ./.config file by setting symbol
values to 'y' as much as possible.
"make allmodconfig"
Create a ./.config file by setting symbol
values to 'm' as much as possible.
"make allnoconfig" Create a ./.config file by setting symbol
values to 'n' as much as possible.
"make randconfig" Create a ./.config file by setting symbol
values to random values.
You can find more information on using the Linux kernel config tools
in Documentation/kbuild/kconfig.txt.
NOTES on "make config":
- having unnecessary drivers will make the kernel bigger, and can
under some circumstances lead to problems: probing for a
nonexistent controller card may confuse your other controllers
- compiling the kernel with "Processor type" set higher than 386
will result in a kernel that does NOT work on a 386. The
kernel will detect this on bootup, and give up.
- A kernel with math-emulation compiled in will still use the
coprocessor if one is present: the math emulation will just
never get used in that case. The kernel will be slightly larger,
but will work on different machines regardless of whether they
have a math coprocessor or not.
- the "kernel hacking" configuration details usually result in a
bigger or slower kernel (or both), and can even make the kernel
less stable by configuring some routines to actively try to
break bad code to find kernel problems (kmalloc()). Thus you
should probably answer 'n' to the questions for
"development", "experimental", or "debugging" features.
COMPILING the kernel:
- Make sure you have at least gcc 3.2 available.
For more information, refer to Documentation/Changes.
Please note that you can still run a.out user programs with this kernel.
- Do a "make" to create a compressed kernel image. It is also
possible to do "make install" if you have lilo installed to suit the
kernel makefiles, but you may want to check your particular lilo setup first.
To do the actual install you have to be root, but none of the normal
build should require that. Don't take the name of root in vain.
- If you configured any of the parts of the kernel as `modules', you
will also have to do "make modules_install".
- Verbose kernel compile/build output:
Normally the kernel build system runs in a fairly quiet mode (but not
totally silent). However, sometimes you or other kernel developers need
to see compile, link, or other commands exactly as they are executed.
For this, use "verbose" build mode. This is done by inserting
"V=1" in the "make" command. E.g.:
make V=1 all
To have the build system also tell the reason for the rebuild of each
target, use "V=2". The default is "V=0".
- Keep a backup kernel handy in case something goes wrong. This is
especially true for the development releases, since each new release
contains new code which has not been debugged. Make sure you keep a
backup of the modules corresponding to that kernel, as well. If you
are installing a new kernel with the same version number as your
working kernel, make a backup of your modules directory before you
do a "make modules_install".
Alternatively, before compiling, use the kernel config option
"LOCALVERSION" to append a unique suffix to the regular kernel version.
LOCALVERSION can be set in the "General Setup" menu.
- In order to boot your new kernel, you'll need to copy the kernel
image (e.g. .../linux/arch/i386/boot/bzImage after compilation)
to the place where your regular bootable kernel is found.
- Booting a kernel directly from a floppy without the assistance of a
bootloader such as LILO, is no longer supported.
If you boot Linux from the hard drive, chances are you use LILO which
uses the kernel image as specified in the file /etc/lilo.conf. The
kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
/boot/bzImage. To use the new kernel, save a copy of the old image
and copy the new image over the old one. Then, you MUST RERUN LILO
to update the loading map!! If you don't, you won't be able to boot
the new kernel image.
Reinstalling LILO is usually a matter of running /sbin/lilo.
You may wish to edit /etc/lilo.conf to specify an entry for your
old kernel image (say, /vmlinux.old) in case the new one does not
work. See the LILO docs for more information.
After reinstalling LILO, you should be all set. Shutdown the system,
reboot, and enjoy!
If you ever need to change the default root device, video mode,
ramdisk size, etc. in the kernel image, use the 'rdev' program (or
alternatively the LILO boot options when appropriate). No need to
recompile the kernel to change these parameters.
- Reboot with the new kernel and enjoy.
IF SOMETHING GOES WRONG:
- If you have problems that seem to be due to kernel bugs, please check
the file MAINTAINERS to see if there is a particular person associated
with the part of the kernel that you are having trouble with. If there
isn't anyone listed there, then the second best thing is to mail
them to me ([email protected]), and possibly to any other
relevant mailing-list or to the newsgroup.
- In all bug-reports, *please* tell what kernel you are talking about,
how to duplicate the problem, and what your setup is (use your common
sense). If the problem is new, tell me so, and if the problem is
old, please try to tell me when you first noticed it.
- If the bug results in a message like
unable to handle kernel paging request at address C0000010
Oops: 0002
EIP: 0010:XXXXXXXX
eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx
esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx
ds: xxxx es: xxxx fs: xxxx gs: xxxx
Pid: xx, process nr: xx
xx xx xx xx xx xx xx xx xx xx
or similar kernel debugging information on your screen or in your
system log, please duplicate it *exactly*. The dump may look
incomprehensible to you, but it does contain information that may
help debugging the problem. The text above the dump is also
important: it tells something about why the kernel dumped code (in
the above example it's due to a bad kernel pointer). More information
on making sense of the dump is in Documentation/oops-tracing.txt
- If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
as is, otherwise you will have to use the "ksymoops" program to make
sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred).
This utility can be downloaded from
ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ .
Alternately you can do the dump lookup by hand:
- In debugging dumps like the above, it helps enormously if you can
look up what the EIP value means. The hex value as such doesn't help
me or anybody else very much: it will depend on your particular
kernel setup. What you should do is take the hex value from the EIP
line (ignore the "0010:"), and look it up in the kernel namelist to
see which kernel function contains the offending address.
To find out the kernel function name, you'll need to find the system
binary associated with the kernel that exhibited the symptom. This is
the file 'linux/vmlinux'. To extract the namelist and match it against
the EIP from the kernel crash, do:
nm vmlinux | sort | less
This will give you a list of kernel addresses sorted in ascending
order, from which it is simple to find the function that contains the
offending address. Note that the address given by the kernel
debugging messages will not necessarily match exactly with the
function addresses (in fact, that is very unlikely), so you can't
just 'grep' the list: the list will, however, give you the starting
point of each kernel function, so by looking for the function that
has a starting address lower than the one you are searching for but
is followed by a function with a higher address you will find the one
you want. In fact, it may be a good idea to include a bit of
"context" in your problem report, giving a few lines around the
interesting one.
If you for some reason cannot do the above (you have a pre-compiled
kernel image or similar), telling me as much about your setup as
possible will help. Please read the REPORTING-BUGS document for details.
- Alternately, you can use gdb on a running kernel. (read-only; i.e. you
cannot change values or set break points.) To do this, first compile the
kernel with -g; edit arch/i386/Makefile appropriately, then do a "make
clean". You'll also need to enable CONFIG_PROC_FS (via "make config").
After you've rebooted with the new kernel, do "gdb vmlinux /proc/kcore".
You can now use all the usual gdb commands. The command to look up the
point where your system crashed is "l *0xXXXXXXXX". (Replace the XXXes
with the EIP value.)
gdb'ing a non-running kernel currently fails because gdb (wrongly)
disregards the starting offset for which the kernel is compiled.
Download.
OREO KERNEL SOURCE 3.x
credits:-
@osas514
@GHsR
Click to expand...
Click to collapse
How is it going to help us?
Repo deleted