Related
I've considered rooting and installing a custom ROM dozens of times ever since I got my Droid X back in August and I've finally decided I'm just going to do it, but i just want to double check a few things before I root my phone and install Fission:
1. I know that rooting voids your warranty, but if I have problems with my phone and I end up needing repairs, can I just unroot my phone back to stock and still have my phone be covered under the warranty?
2. Will my phone be secure rooted with a custom ROM? I don't want people having access to my personal info contact data, and my passwords.
3. If I Overclock to say 1.2 or 1.3 Ghz with ULV, will I have stability problems with demanding 3D games or other demanding apps?
4. After I root and install my Custom Rom, will I need to reactivate my phone or need to re-add my phone contacts/apps?
5. Will Z4Root work on system version 2.3.340?
I have unrooted and exchanged under warranty with no problems. Your phone will be just as secure. 1.2-1.3 are very stable on my phone. If you do have to reactivate it's as easy as dialing *228 and following the prompts. If your contacts are "google" contacts they'll return to your phonebook. Your apps from the market shall return without a problem. And yes, z4root will work with your system version.
Sent from my DROIDX using Tapatalk
I am having difficulty rooting my droid x. I am an android noob, but am a pretty savvy user. I used z4 (permanant) and it says it has been rooted when i launch the app. However i see no appreciable difference in access. My terminal still shows a $ prompt and i cannot uninstall verizons crapware. I used rage against the cage prior to z4 with similar results, but i was able to at least get temporary su access and install the bootstrap recovery and perform a system level backup. It reverted to user access after rebooting. Please help.
Superuser confirmation
alright, if you want super user privileges in terminal type "su", then once you hit enter, you get "#" instead of "$" To test if you have root access, first check app drawer for "Superuser" if its there, open an app that requires it, (wifi teather, root explorer, rom manager to name a few) you should get a pop up similar to this
http://www.google.com/imgres?imgurl...=1&ndsp=12&ved=1t:429,r:8,s:0&biw=888&bih=638
that would be a diffinitive confirmation that you have superuser permissions.
The way I remove verizons crap once rooted, is to use root explorer, go to system/app and find the .apk files you want to remove. There are lists around the forums what is safe to remove. I highly recommend simply renaming the files. For example, the 3g hotspot app is called mynet.apk, so I would just rename it to mynet.bak, or mynet.apk.bak, really anything that lets you know what it is, but removes the .apk extension.
Ok, I have confirmed su access, but am unable to rename any of the offending .apk's. I am simply told that the operation was unsuccessful. I have tried a couple of different file managers, as well as trying from a terminal, still no luck. I like 2.2.1 alright, but if i can't control what apps are running on my phone with root access, I may want another ROM. Any suggestions are appreciated, aswell as any links to a rom installer that is pc-less.
I usually rename apk's from Root Explorer, just prefer the graphical interface, so I can't really help you on the terminal process.
Rom manager is "pc-less" although most roms are posted in forums first it is often the easiest route, also lets you make backups and restore. There are a few posts around on how to install a rom you might want to read first. Also, you should find the thread for the rom before you flash it, in favor of size and speed, some developers go down to bare minimum and may remove something you need/want.
I have not used it, but I hear Titanium Backup allows you to "Freeze" apps, so that is a possible route also.
2.2.1 is not exclusive to people running official vzw builds, many of the roms on the forum (and rom manager) are running 2.2.1, so you will not be taking a step back to an earlier release.
SharkBaitDave said:
I usually rename apk's from Root Explorer, just prefer the graphical interface, so I can't really help you on the terminal process.
Rom manager is "pc-less" although most roms are posted in forums first it is often the easiest route, also lets you make backups and restore. There are a few posts around on how to install a rom you might want to read first. Also, you should find the thread for the rom before you flash it, in favor of size and speed, some developers go down to bare minimum and may remove something you need/want.
I have not used it, but I hear Titanium Backup allows you to "Freeze" apps, so that is a possible route also.
2.2.1 is not exclusive to people running official vzw builds, many of the roms on the forum (and rom manager) are running 2.2.1, so you will not be taking a step back to an earlier release.
Click to expand...
Click to collapse
If you are trying to rename apps in the /system/app portion of the OS, you will need to mount /system as RW first.
from terminal: mount -o rw,remount /dev/block/mtdblock4 /system
After it has been mounted read-write, you should be able to rename...
to remount as read-only: mount -o ro,remount /dev/block/mtdblock4 /system
zwade01 said:
I have unrooted and exchanged under warranty with no problems. Your phone will be just as secure. 1.2-1.3 are very stable on my phone. If you do have to reactivate it's as easy as dialing *228 and following the prompts. If your contacts are "google" contacts they'll return to your phonebook. Your apps from the market shall return without a problem. And yes, z4root will work with your system version.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Thank you for your response. Just out of curiosity, did you (or anyone else for that matter) have to reactivate your phone after rooting and installing a custom ROM? I'd rather not have to re-activate my phone every time I want to update a ROM or change to a different ROM.
Thank all of you for the great info. Here's what I've learned after a day of rooting and romming: titanium freezes apps only in the paid version, z4 was the most user friendly app for rooting noobs, milestone overclock works well if you have the patience to lock up your phone several times finding the right settings, and I'm digging apeX 1.3.1. Thx to everyone for your help, i will definately be checking here frequently. One last question: where might i find a side by side comparo of roms with things like features and memory footprint, etc.? Or am I asking for too much. Im not scared of the search button, but i will defer to the more experienced of you. Thanks again.
galaga4991 said:
Thank you for your response. Just out of curiosity, did you (or anyone else for that matter) have to reactivate your phone after rooting and installing a custom ROM? I'd rather not have to re-activate my phone every time I want to update a ROM or change to a different ROM.
Click to expand...
Click to collapse
I used rom manager to load apeX 1.3.1 and did not need to #228. I did not clear the user data or cache, but I do not know if that affected my results or not. Your mileage may vary.
stpvapor said:
Thank all of you for the great info. Here's what I've learned after a day of rooting and romming: titanium freezes apps only in the paid version, z4 was the most user friendly app for rooting noobs, milestone overclock works well if you have the patience to lock up your phone several times finding the right settings, and I'm digging apeX 1.3.1. Thx to everyone for your help, i will definately be checking here frequently. One last question: where might i find a side by side comparo of roms with things like features and memory footprint, etc.? Or am I asking for too much. Im not scared of the search button, but i will defer to the more experienced of you. Thanks again.
Click to expand...
Click to collapse
I don't know that anyone has really done a side by side per say. Since you say you are apeX, then if you are looking for more ROM's that contain blur features, then I would recommend looking into ZapX Bazinga, or Fusion (from the same creator as Fission, but just with blur). I have not worked with any of the Blur ROM's so far...
If you are looking for ROM's that do not have blur, then the big ones are Liberty, Fission 2.5.7, GummyJar 2.5, and Rubix Focused 1.9.5. Liberty is the big one right now, because it just came out and combines the great talents of Kejar31 and Jrummy. Most others I believe are using Fission. All are great choices, as the dev's do some AMAZING work.
Each has their owns unique feel...so I woudl recommend just digging through each thread for their respective ROM's as they usually include what components are built into each ROM on the original post of each thread.
Hope this helps somewhat =)
another ROM to try is DarkSlide. It comes in both flavors, Blurred & Blurless. It's fast, stable & well supported. You only have to re-activate if you wind up bricking your phone & have to flash an SBF. My advice it to spend the $$ on DroidXBootstrapper (available in the market) to make a nandroid backup prior to flashing your new ROM. This way you have a base to go back to in the event you run into problems, or want to try multiple ROMS. One other suggestion is to rename each backup into something that will let you know what the backup actually is, like StockROMBU or the like.
And every other step you need to transform and gain control of your stock ROM!
Given the fact that T-Mobile and Samsung have made it clear that the Galaxy S Vibrant will not receive Gingerbread, Honeycomb, ICS, or any other functionality update, I made the decision that it was finally time to root my beloved phone.
I didn't want to root for the purpose of trying a ROM for any of the above OS's. I merely figured that since there are not going to be any future updates to my phone, I'm basically on my own. And if I'm on my own then I can and should get rid of the TMo crap software that came pre-installed on my phone (and which can't be uninstalled by any normal means).
Hopefully this process might also help make my phone operate a little faster and cleaner. And in general, the rooting process would give me full control over my own phone. But if you have ever rooted a device the experience can sometimes be challenging, even for tech-savvy folks like me.
There are lots of sites for advice and how-to’s on rooting your Android device, but most of these sites run you through the process in a way that assumes all will work perfectly the first time. There aren't a lot that take you through the root process with at-hand solutions to many of the commonly reported errors.
I've just finished rooting my stock TMo Vibrant, fixing signature/Multi-CSC issues from the root process, installing and using Titanium Backup (TB) PRO to handle bloatware, and finally installing ROM Manager for the purpose of installing ClockworkMod Recovery (for creating and restoring backups of my current ROM). WHEW! And while it's all fresh in my mind, I'm writing it all down to share the process with you so that it's all in one convenient place.
Let’s Start With Rooting The Phone By Using Super Oneclick
After doing some reading in the XDA forums and a few other places, I wanted to try rooting with a one click option. There are many out there that are available for use. But the very first issue that plagued my rooting process was the incompatibility of many of these root installers with my home Win7 64bit pc.
I tried downloading and extracting various recommended solutions that use the "one click" functionality (Super Oneclick--various versions with and without drivers, Galaxy S One Click Root, and Vibrant One Click Root). I also downloaded and installed AIO Vibrant Toolbox, a program which also features a “one click” method for rooting a Vibrant once it has been installed on your pc.
What many posts on rooting never really mention with these methodologies is that you might have issues running the programs on a Win7 machine, which was my issue. Not all Win7 machines, but some. I downloaded the zip file for each with generally with no issue. * But once I tried to run the exe (best done via "Run As Administrator"), I got the following error message on virtually all of them:
"CLR Error: 80004005 The program will now terminate"
AIO Vibrant Toolbox wasn’t any better even though it was an installed program. It terminated as well.
(*NOTE: Anti-virus programs will mistake parts of the root zip files for Trojans, usually quarantining them after download. You are then left with the uncomfortable choice of turning off your anti-virus and taking that chance, or looking for another zip solution. I opted for the latter. Never take a chance with a Trojan!)
These errors messages did not show up on my work pc which is also Win7 64-bit. But that was no comfort as most of my root work was going to be done at home. After much searching on the internet, I read a random post that mentioned two helpful suggestions:
Use a rear or powered USB port, not a front port (because they often can’t power the root install sufficiently)
Use Super Oneclick v1.7 as opposed to any newer versions. The newer versions can cause problems with this particular Galaxy S root.
Two simple suggestions that made a world of difference! The root process worked smoothly afterward, and was finally a "success".
Reminder - Remember to put your phone into USB Debugging mode for the root process, and don’t mount the external SD card when attached.
Along the way to “rooting” you might be confronted with messages about your Samsung drivers for your phone. You may see messages like these:
Device drivers not found
Samsung android USB composite device failed
A quick search on these forums will yield updated drivers for your phone. The successful install of these drivers can also be a function of using the proper USB ports, as in the situation above. The installation of Samsung drivers failed on the front USB ports of my Dell. Success was again found using the rear ports. The main point here: use the rear ports (or powered USB ports) no matter how much of a pain it is maneuvering under your desk and behind your pc!
You’re Almost There…Kinda!
You can check to see if you are successfully rooted by checking to see if Superuser is installed in your apps. It was there… whew. The next step was to install Titanium Backup so that I could have root control over my apps, allowing me to delete bloatware that was slowing my phone. I downloaded TB from the Market, opened it, tried to give it Superuser permissions, and was notified with an error message that permissions were unsuccessful because the phone was not rooted. WHAT???
More online research revealed that I had achieved a “soft root”, whereby you have successfully rooted your phone but you don’t have all root permissions because the install wasn’t complete. The solution? Basically you just have to keep doing it more than once. All steps of this process seem like they will take the first time if you do what you are supposed to do. But more often than not, you have to repeat your steps over and over to make sure that it takes. After two more Super Oneclick rooting attempts, TB finally gave me the thumbs up for root.
Some may say it’s not necessary, but I upgraded to TB PRO. It allows for more options and better functionality with the apps and system data on the phone. And really, at about 6 dollars it is more than worth the price. Heck, two Starbucks lattes will run you more than 8 or 9 bucks. So if I can get piece of mind with respect to app management on my newly-rooted phone, 6 bucks is more than worth it.
I immediately wanted to learn how to remove bloatware -- and it’s amazingly difficult to find clear directions on doing so. After my backup of all apps and data, I went to the backup/restore tab and found the programs I wanted to get rid of. Many online users recommend “freezing” an app first to make sure that removing it won’t make your phone all wonky. So after “freezing” the offending apps (by pressing the menu button, selection batch, and then scrolling down to the appropriate section on freezing apps), I long-pressed the desired app and only saw one option for uninstalling via an exploit. I selected it and long story short, it failed. As the phone boots to stock recovery, this message popped up:
E:failed to verify whole-file signature
E:signature verification failed
Applying Multi-CSC Installing
Multi-CSC Installation Aborted
In simple terms, the rooting tool (Super Oneclick) doesn’t contain all of the necessary items for a complete root. A fix is needed for the invalid signature problem that will help you get to a full root state. Fortunately there are fixes out there you can find for this particular fix.
Here are some helpful links:
http://androidforums.com/galaxy-s-a...iled-installation-aborted-one-click-root.html
http://forum.xda-developers.com/showthread.php?t=1052991
Read the instructions for the fix on the first page, but get the correct file from the second page as the link for the fix from Dropbox is a little messed up in the first URL. The second URL has the correct link. Use the automatic method so that you don’t have to use the terminal emulator. If you are like me, this process has already given you more gray hairs than you would really like to admit. So take the easy route.
Run the install.bat file and you will be fine. When you reach stock recovery again remember to reinstall all packages. This will make sure that the fix is installed properly. I didn’t know that was needed and was wondering why the fix wasn’t taking initially. So I’m sharing this with you to head off your frustrations at the pass. ;-)
Getting Rid Of The Bloat
Check to make sure that you are fully rooted by opening TB. It will automatically take Superuser permissions from the first time you allowed it IF you are rooted. If not, it will tell you. And by now you should be rooted. Heading back to the bloatware, I was able to figure out that the “long press method” was not the correct one for uninstalling apps.
Once again, press the menu button (bottom left) and select batch. Scroll down and you will see a section for uninstalling apps. Select uninstall user and system apps, and make sure to DESELECT ALL before you do anything else. From there you can pick and choose the apps to uninstall, then “run the batch operation” to complete the task. Bye bye bloatware!
The last crucial step to complete now that your phone is rooted is to make sure that you have a backup of your current ROM and configuration. The backup you created using TB is only for apps and data. It is not a backup of your current stock ROM.
Nandroid backup works best for the purpose of backing up and restoring ROMs. And if you have done any previous rooting on an Android device, you will recognize that Nandroid is a function of ClockworkMod Recovery. Sigh. I know... frustration starts to set in as you realize that there is yet another necessary install needed for a totally successful root process ON TOP OF and AFTER everything else you have had to do. So what is the next step?
ROM Manager To The Rescue
Install the free ROM Manager from the Market and you will be good to go. This app allows you to flash CWM Recovery as well as mount various ROMs on your phone. After installing the app (and declining the various offers that pop up), press “Flash ClockworkMod Recovery” at the top of the menu. It will cause the phone to reboot. And CWM will be downloaded…but not installed. To install after reboot, open ROM Manager and now select Reboot into Recovery. It will challenge you with a question on whether you really want to do this or not. Say Yes.
Important: This is another one of those places where it’s not intuitively obvious what to do for CWM Recovery.
When I first rebooted into recovery I didn’t see any changes from my stock recovery menu…because there were none. What I needed to do (which I found in yet another forum posting) was again to select Reinstall all packages. CWM had been downloaded and was ready to install… this would do so.
Happily, the phone went into Clockwork recovery*immediately after "Reinstall all packages" . If it wasn't clear earlier, use the volume buttons toggle up (or down) to select backup/restore. *You can then implement your selection by pressing the power button on the right side of the phone. On the next screen select backup, and then let it do its’ thing. It may take a while to complete, but will be well worth the time and effort if you have any future problems.
The Entire Process Is Finally Complete
So there you have it. In a nutshell, here were my steps:
1. Samsung drivers
2. Super Oneclick v 1.7
3. E. Signature fix
4. Titanium Backup PRO
5. ROM Manager (free version)
Use the rear USB ports or powered USB ports for the phone connection. Phone should be in USB debugging mode, and external SD card should not be mounted. For each process, it may take up to 2 or 3 attempts for successful completion. So keep trying after the first FAIL message. When applicable, “Reinstall All Packages” to make sure that downloaded files are actually installed.
And lastly, if absolutely nothing works correctly for you, PLEASE PLEASE PLEASE use Google for help. Many others have successfully worked through all of the problems you might encounter that aren’t listed here. Actively use Google to help find solutions to any problems, using the exact error messages shown and adding in your phone type. You will be amazed by the depth of experience out there that can help you.
Above all else, keep up a good attitude. Rooting might be a pain in the ass while you are doing it, but it’s for a greater purpose. My four days of rooting have now given me a phone that is FREE from all the bloatware that bugged me for the past two years. And soon I’m sure I will experiment with a different ROM. But for now I’m just happy that I have my phone, my way. After all, if they (TMo and Samsung) aren’t going to make our phones better, we can do so for ourselves.
Good luck, and I hope this complete set of instructions from my own past 4 days of experience will help someone else!
A good read. A few things though with the Titanium part.
First I whole-heartedly agree to kick down the $ for the Pro. It really ups the functionality of the app and what all it can do.
The part about "freezing". This part is tricky b/c you need to make sure he apps that you are freezing are indeed bloat and not something that is needed for something else (i.e. did you know that GTalk directly effects the market on some ROMS). I don't use Gtalk but I still have it installed and frozen so I can defrost at will. This is the reason for Freeze. It lets you know of any adverse effects on your ROM, other apps,...then you have the option to defrost if need be. I also always avoid doing anything in "Batches" on TBPro, as it can sometimes be a little wonky, especially when restoring batches, causes reboot and freezes resulting in batterty pull.
I freeze for at least a week on new ROMs so that I get the full experience with daily life to make my determination on uninstall, defrost or wait longer.
Another way to do it is once you know the apps that are frozen do not effect any other parts of your ROM, you can back them up with TBpro for later use and uninstall or you can do it this way. Since you have root, go into /system/app or and pull the APK out and put it in a folder or something like that on your SD card. You would do this to some of the /system apps that TB shows as only haveing a checkmark next to and not the yellow/orange circle with the M in it. If you uninstall these with the checkmark you will not be able to restore them b/c part of the executable portion of the APK is not able to be backed up. This is the reason to pull the app out of /system/app and put it on your SD card. Hit menu, more, Clean up Dalvik cache and viola!! you have some free space on /system and the offending APK's dex will be deleted too.
Sidenote: I have never been able to get SuperOneClick to work on any phone I have ever tried. Maybe I'll unroot and try again but the SU exploit is a flashable zip located here. Option A. Put it on your SD card, boot into recovery and Bam!!! you are rooted
Nice work though.
Where can we still get Super Oneclick v 1.7?
http://forum.xda-developers.com/showthread.php?t=739300 make sure you have ADB turned on and use the USB ports from the back not front
too lengthy.
Just got vibrant
Sent from my SGH-T769 using xda app-developers app
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Delete..
I recently rooted/installed CleanROM for my S4, but now I have some basic questions regarding what actually happened in the process and how I could improve it. (First smartphone, first Android).
1. Is flashing the exact equivalent of installing a kernel/ROM/app in a recovery like TeamWin that is zipped in an SD card? All I did was select my zipped file and install--the guide says to use GooManager but I never used it. Also, does updating TWRP, kernel, or ROM (same application/kernel/ROM, but newer version) require that you delete the old ZIP, copy over the new ZIP, then install it? Is there a cleaner method (I feel that since we have to wipe to prevent old files from interfering with new ROM that maybe parts of the old version of a ROM may be redundant or may interfere with the new ROM?
2. Is there a way I can save the phone settings when dealing with one ROM and transferring these settings to another ROM? I really don't want to spend 20 minutes to go through all the settings and change it to my liking every time I install a new ROM.
3. With TWRP I could backup the entire ROM and also be able to install that backup ROM if I don't like the new ROM installed? What does Titanium Backup offer in regards to this aside from backing up app data and the ability freeze/uninstall system apps?
4. Does Titanium Backup leave any residual files? I see other apps designed to uninstall system apps and Titanium Backup seems like an all-in-one jack of all trades.
5. I thought I wiped everything and to me, that sounds like reformatting the entire drive. I only wiped system, boot, and data though (good enough for ROMs, according to what I've read). I was surprised when I saw my videos that I had already backed up to my PC accessible on the phone. Should I just wipe literally everything (I assume it would be cleaner) like cache, preload, EFS, modem, recovery, etc.? Will wiping literally everything be like reformatting my phone (since my phone was not reformatted because my personal videos was still there when I installed my custom ROM? If I were to install completely different ROMs cleanly and wanted to keep my personal files, I would only need to wipe system, data, and boot?
4. Do I have to use CASUAL again to install an updated TWRP?
5. Does backing up a ROM also backup its root? I'm going to assume this is a dumb question and the answer is no. I'm also guessing I have to block OTA updates from AT&T to ensure I keep my root. How would I go about doing this? Also, would my phone be "safe" if I stick to my ROM (no updates or anything) for 4+ years? I'm asking this as an extreme case because I feel like I'm missing out on AT&T security updates that could protect my phone and also I don't think the developer my ROM (CleanROM) will do frequent updates).
6. I had problems with my computer not being able to recognize my phone and my SD card in the phone after I wiped everything and before I installed a ROM. I literally had to take the SD card from the phone and use an SD card reader to transfer my custom ROM/loki then put it back into the phone. Was I missing a driver?
7. What are some must-have apps a newly rooted user would want?
8. I read that you only need 1 EFS backup and you don't need to back it up every time you are going to install a custom ROM. Can I get a confirmation?
9. What does Goo Manager do and would I want it?
10. Is it essential that I keep up to date with news about my custom ROM/phone to ensure my phone is secured?
**Not Root/ROM related--Is swiping an app away from the Recent Apps List (long-press home button) the equivalent of killing an app? I use the Recent Apps List often but I don't want to go about swiping apps away if means it is killing it, since I read that killing apps are bad and actually drains battery life. Also, is there a mod that lets you access the Recent Apps List by long-pressing the menu one? I only see a mod that kills the app if you long-press it.
Also, any ROMs you guys can recommend me that is like CleanROM? It has to be TW-based because I use multi-windows. Basically, I want a stable, popular (popular ones tend to be more frequently updated, which is important because there are often bugs in custom ROMs), and optimized/debloated ROM (as debloated as possible, I rather use my own large list of apps than pre-installed ones). I was looking at GoldenEye but I'm not sure.
Thanks. I'm hoping for many responses as I have more questions to ask but not a lot of free time (I will check back on this thread every several hours until there are no more responses on the thread.
Hey there! Here is my take on at least some of your questions. I am not a super pro, but I will try not to give you any wrong info.
1. The zip files that are still out on your SD card are just the install files for whatever you are flashing. They won't be cleaned up automatically and you will need to delete them yourself if you want them gone. That being said I would recommend leaving the previous version's zip out there in case you need to back out of the new version.
2. If by phone settings you mean all of the settings in the various option menus baked into the ROM it is best to redo those when switching between ROMs. Many ROMs add and take away options and add whole new option sections so you will want to go through those and set things to your liking. Another option is to use a launcher like Nova Launcher that lets you back up its settings and restore them which is a big chunk of the things I change when going to a new ROM. Some people may have a different opinion on this one.
3. Yes if you make a backup in a recovery like TWRP and then restore from it it will be like you never flashed the other ROM. Titanium backup does what you say and also can backup individual Apps themselves and restore them.
4. Once you have a recovery installed you should not have to go through the hoops you went through to get it there to update it. Check the thread for the recovery for upgrade instructions.
5. Your SD card will not be wiped when you wipe system or data. There is also the internal "sdcard" that if I recall is not wiped when you do a standard wipe which will keep things like pics and videos between flashes.
6. So you were trying to access the phone storage/SD card while it was in recovery? I have never had much luck with that. I always just make sure I have all of the files I will need to install the new ROM moved over before I wipe it. That being said if you have the right driver it might be possible.
7. Titanium Backup, a file explorer that can leverage Root access like Root Explorer, maybe something like Greenify (I think it takes Root). Other than that check out the thread in the Apps/Themes subforum where people list their top 5 apps.
8. Pass (but I think what you heard/read is right)
9. Goo Manager can let you know if there is updated version of your ROM or what other ROMs are available for your device and download them. It can also be used to install a recovery. Personally I don't use it and just check ROM threads for updates if the ROM doesn't offer OTA updates.
10. I rarely see mention of security fixes/features in custom ROMs so I don't think you need to stay on top of threads for that reason. With that said, if security is crazy super important to you then a custom ROM might not be your best bet. Even though source code is available for most if not all of them that doesn't mean someone has gone through the code looking for security flaws (or even malicious code).
11. You can test this yourself. Go into the "Apps" section of the options and look at what Apps are running then swipe one away and check again. Personally I would go ahead and swipe away Apps as needed since that is a core Android feature. I haven't seen a mod for what you are asking.
12. The other two TW-based ROMs I have used are Goldeneye and Alpha. Both are good, but I am using Alpha now due to its higher degree of customization. Goldeneye hasn't been updated in a month or so, Alpha is being updated regularly at the moment.
---------- Post added at 08:15 PM ---------- Previous post was at 08:09 PM ----------
Here is the link to the thread where people list out their top 5 apps!
Nice post, very good help...serious...
Incredibly helpful, thanks. I will post more questions if I have here, kind of busy at the moment.
Question:
What is the best way to detect whether a third-party app has a keylogger? I read from an article that it is incredibly easy for someone to put a keylogger on an app. Is Avast Mobile Security and Antivirus capable/overkill for this job? Also, I was worried that Avast may actually be bad because it would deteriorate (wear and tear on the SSD of the phone) through all the scannings? Or am I completely wrong? If I am wrong, I'm guessing it's because an antivirus only reads your files and therefore does not wear down a SSD (I'm not even sure if this is right).
mindstormer said:
Question:
What is the best way to detect whether a third-party app has a keylogger? I read from an article that it is incredibly easy for someone to put a keylogger on an app. Is Avast Mobile Security and Antivirus capable/overkill for this job? Also, I was worried that Avast may actually be bad because it would deteriorate (wear and tear on the SSD of the phone) through all the scannings? Or am I completely wrong? If I am wrong, I'm guessing it's because an antivirus only reads your files and therefore does not wear down a SSD (I'm not even sure if this is right).
Click to expand...
Click to collapse
You can read a SSD all day long, that doesn't wear it out. Writing to a SSD will cause wear, not reading. I'm thinking that most antivirus apps can find that kind of stuff, but don't download from unknown sources or those you don't trust. Even Google Play has some shady stuff. I would recommend researching an app on Google if you have any doubts about it. I'm sure it can be done, but I really doubt any of your friends know how to reprogram one of your apps to have a keylogger, plus I wouldn't let them use my phone in the first place.
To answer your questions:
1. Antivirus doesn't wear anything out, it just puts load on your system.
2. Most antivirus apps should detect apps like the ones your talking about.
agent929 said:
You can read a SSD all day long, that doesn't wear it out. Writing to a SSD will cause wear, not reading. I'm thinking that most antivirus apps can find that kind of stuff, but don't download from unknown sources or those you don't trust. Even Google Play has some shady stuff. I would recommend researching an app on Google if you have any doubts about it. I'm sure it can be done, but I really doubt any of your friends know how to reprogram one of your apps to have a keylogger, plus I wouldn't let them use my phone in the first place.
To answer your questions:
1. Antivirus doesn't wear anything out, it just puts load on your system.
2. Most antivirus apps should detect apps like the ones your talking about.
Click to expand...
Click to collapse
Thanks for the confirmation.
Another question for anyone:
Clean Master found the folder of an app that I installed on a precious ROM, so I not wipe the device cleanly. I though wiping system, boot, and data was enough--what was I missing, or should I have checked everything to be wiped on TeamWin Recovery?
Are you sure its not coming from your SD card?
Sent from miPhone using XDA Premium HD app
So I just rooted using this tutorial on theunlockr
This is my first time rooting an android phone. I used to root the old iphones way back in 07 and 08 and it would put an app on homescreen to access apps.
I have no idea what to do now on the LG. Is there something else I download.
Where can I get apps?
What is this ROM Gummy stuff I keep reading about?
Thanks again
Rooting on Android is basically like getting 'administrator access'. Some applications require root access to perform certain functions. It doesn't really add a new 'app store' like Cydia. You can find applications in the form of .apk files and install them by copying them to your phone and running them (Google is your friend). You don't need root to actually install the application, but some apps require root access to function.
Some apps that need root access are Titanium Backup (for hiding/deleting un-installable apps like the AT&T/Verizon junk) or Xposed Framework. Xposed framework, along with the G2 Xposed app lets you tweak certain aspects of the UI - something that normally LG doesn't allow. You can change the Menu button to a Recent Apps button (more like stock Android) or remove the Volume/Brightness sliders from the Notification Slider since they take up a lot of visible space.
Alternatively, you can now follow the tutorial for installing TWRP recovery on your phone. TWRP is an enhanced recovery mode that will let you flash custom ROM's or other mods to your phone. It also has a handy backup function (commonly called a Nandroid backup) which basically saves an 'image' of your phone in its current state. This way if you screw up flashing a new ROM and end up on a blank screen with Android not loading, you can always boot into Recovery mode and restore the Nandroid backup to get your phone working again.
Flashing something through TWRP requires getting a zip file of the ROM/Mod, copying it your phone's storage and then booting into Recovery. From here you'll be able to flash the zip. You can find custom ROM's in the appropriate Android Development subforum. You can also find certain mods like the SplitWindow mod - which has been ported from another LG phone (and requires Root access). It basically lets you run two applications side-by-side in a split-screen view.
get exposed framework and add modules to change apps native dpi, change privacy options off apps.
Search on safe to delete bloatware and slim phone down.
but before all this nandroid plus backup efs everywhere.
if feeling daring, go custom roms and void warrantee even more
Sent from my LG-D802
Please Read Everything Carefully as some info is crucial to getting your old phone functioning well!
Update:::: August 16, 2015 ::::::::::
STAGEFRIGHT BUG:
This bug has been blown way out of proportion and it is not something anyone should be extremely worried about. There are no patches for gingerbread as of yet, and I cannot patch it since I do not have the CM source. However, you can copy from /system/build.prop and open the file in Notepad++ and then search for "stage" and change the "true" to "false" -without quotes. While this is not a fix, it will still offer some protection. Do not download apk files from places you do not trust and you should be ok. For now you can also do the following :
1) In MMS App, Turn off Auto-Retrieve. If your Carrier converts your voice mails to text, you will no longer be getting those. The app will then provide a download button for you to download the message instead. You can simply call your voice mail and listen to the message and download it if you think its important.
2) Remove the stock browser - do not use it to sign into anything.
3) Use Firefox as your default browser. It will be slower but safer. Type about:config > Search for Stagefright > Set stagefright.disabled to True
4) FIREWALL : Use AFWall+ to block Apps making unneeded connections to places you don't trust. It starts in Whitelist mode. Change it Blacklist mode. Be careful, and understand how to use this. LINK https://play.google.com/store/apps/details?id=dev.ukanth.ufirewall&hl=en
6) In an effort to save RAM and unnecessary background Operation, I have included ForceStop Prevent Running. Do not update this past version 0.15. Updates after this do not work well on Gingerbread. Preventing Google Play Store is ok, Play Services is optional (You will lose all sync except Contacts and Calendar but no unnecessary background syncing.[/I]
7) GApps package now Included. It is Stock Gingerbread Gapps with Google Play Store updated to version 5.1.11. Please note that the latest Google Play Store works Fine but it is slower. If you want to block it from Updating, BEFORE connecting to Wifi, IF the APK is called com.android.vending.apk THEN create a new directory in /data/app called com.android.vending-1.apk, so it is always 1 number higher than what is installed. Also, if you do Update, MOVE the update to System parition or you will have 2 copies of it. Then delete its Dalvik cache and reboot
Update :::: June 18, 2015 ::::::::::::::New Goody : Added Modded K9-Email for Gingerbread to list of Software - It is open source, and a good way to check "Hotmail/Outlook" using Imap. Imap functions in Outlook are limited but the program works. I have removed the Ugly K9 dog Icon and replaced it with a real Email icon to make it look more appealing
Updated ::: June 12, 2015 ::::::::::::: New Goody : Attached Adaway for Gingerbread - Disclaimer: I support ads in some apps that do so reasonably, but some apps are out of control with Permissions and blowing up your screen with constant Ads, this behavior is unacceptable so I have included AdAway here. It is the user's Right and choice to do as they please on a carrier/contract free ROM, however it is not my responsibility what you may do with this ROM. This ROM still contains most of the original components of the Original ROM and I may remove outdated functions or add new functions in the future
This is MIUI 2.3.30 Gingerbread version 2.3.7 U.S. English Rom
I have now added various changes to this ROM. No more Security Certificate issues. No more Email / IMAP issues -K9 Mail, Exchange and Google accounts should sync without issues now
Xposed For Gingerbread + Prevent Running + Security Fixes are now attached below for convenience
Partitioning your SDCard is absolutely recommended or you will not have enough Internal Space to have Google Apps - Internal Space should only store Dalvik Cache - Please see details
1) 30 Step Headset Volume Configuration - works great with Volume Limiter
2) Security Certificates updated. Bad and Outdated ones Removed. see GuardianProject. This ROM is more secure. I also highly recommend using Firefox and OperaMini. I have also attached CACERTS.BKS - Remove the .TXT Extension - Already included in the ROM but can be used in other Gingerbread devices!
3) Nexus Pie boot animation
4) Misc changes - Gps locks fast when using GPS apps like Mapfactor Navigator, CPU Sleep works during trackball wake/notify feature, country codes in dialer corrected, Correct APN and Carrier name will show.
Recommended Software
I recommend you download this: Volume Limiter by Captain Neoguri - March 26, 2014
Caution: Nexus One hardware has a bug where upon using this app when adjusting volume outputs in max volume which can be dangerous for your ears, Please do not wear your headset when doing volume adjustments. I recommend a volume of upto 16 in this app for headset max volume.
Recommended : Xposed Framework for Gingerbread :::::: Download Below
Once you install it, Update it, and Install the Following :
1) Fake ID Fix
2) Master Key Multi Fix
3) MasterKeyFix GB
These are all Security Patches for Gingerbread. I have taken the Courtesy to attach them in this thread.
I recommend Google Play Store no later than 5.1.11 as the latest versions seem to have some kind of DPI related bug and will Force close constantly. Google Play Services can however be updated to 7.5.73-034 - I have tested it and it is working perfectly fine
Launcher : I am now recommending Holo Launcher from the Playstore. It saves RAM and it is much more Functional than the Stock launcher. When I have time, I will entirely remove the Stock Launcher and put Holo Launcher in the ROM or until I get permission from its author
Call Blocking Call blocking feature is built into the ROM, however it is like most call blockers which simply hide the blocked call but it still goes through. A solution to this is to use this app. Root Call Blocker : https://play.google.com/store/apps/details?id=fahrbot.apps.rootcallblocker.beta&hl=en
It will take about 5 minutes to set up and will allow you to kill a call after 1 ring and it will not go into your voice mail. So the Spam caller will have no idea whether its a dead number or to even bother calling back. Usually "Dead Rings" make the automated telemarketing calls stop because the computer dialer that is making the call keeps getting dead air and it keeps showing in their call logs. So it becomes their problem, you will simply never see the call coming until 1 day you decide to go in your blocker's call log. So if you have a pesky caller, use this app.
Radio / Baseband Software
http://wiki.cyanogenmod.org/w/Passion_Info
If your 3G does not work, Please check your 3G Network's supported Frequency with your Nexus One 3G Supported Frequency. There were 2 models of this phone released in Canada. This is not due to MIUI and downloading any Radio software will NOT fix this because it is by design.
You need version 5.08.00.04 if you are not using a Korean Nexus One. Download it, then Extract the Radio.img file from the zip.
1) You need to have ADB Fastboot and ADB Enabled on your phone. You can download a small ADB Version here.
http://forum.xda-developers.com/showthread.php?t=2588979
There are also other places to get ADB, But just know there is no need to download Gigantic SDK Kit from Google. You only need the basic ADB with Fastboot.
2) Press Volume Down, Then Press Power and Start your phone in Bootloader Mode. Then select Fastboot. Make sure your phone is now in Fastboot mode, it should say it at the top of all the choices.
3) Go to where you ADB folder is and hit Shift + Right Click = Open Command Window Here.
4) Now Plug your USB cable into your phone and type in Command Prompt this - fastboot devices. You should see your Phone listed. If you do not, go back and check everything.
5) Copy that Radio.img file from the Zip you extracted into your ADB Folder and then type
fastboot flash radio radio.img
It should take about 30 seconds.
Use the instructions here http://forum.xda-developers.com/showthread.php?t=698721 to push it to your phone.
Now you are done.
How To Increase Internal Storage using Data2SD. This puts Apps(apk) AND Data onto your SD EXT Partition so you have more free Internal memory on the internal /Data partition
MIUI comes with something called A2SD+ which is turned off by Default.
1) Go into TWRP Recovery. Create EXT-4 Partition. You will lose all data, so before doing this, its a good idea to backup.
Create an EXT partition size you are comfortable with and depending on your needs.
2) SWAP SPACE 0. You do not need it.
When it is done. Your SD Card now has a FAT partition and an EXT Partition. You can reformat your FAT to FAT32 in Windows if you would like and give it a name.
Then get this Script. MAKE SURE YOU READ EVERYTHING in the Following Threads.
This is Ungaze Data2SD Script. Script is now Attached at the bottom of this post
http://forum.xda-developers.com/showthread.php?t=1378568
http://forum.xda-developers.com/showthread.php?t=1661892
Get the Data2SD Script and copy it to your SDCard FAT32 partition. Reboot your phone a couple times after flashing MIUI. Wipe Dalvik, Wipe Cache, Then Flash Ungaze D2SD from Recovery.
Follow directions in those threads and you should see an increase in Internal Storage Space in MIUI
You can delete the Contents of /mnt/asec/d2sd/data/app/* and /mnt/asec/d2sd/data/data/* from your Device Root which is "/" after this otherwise you will have 2 copies of the same app. You should only have Dalvik-Cache in this location as it links to your Internal Memory Data partition. Make a backup first to your SD Card incase something goes wrong by copying those APKs, then simply Delete them. Your Device System Partition will have System Apps, Data partition will have Dalvik Cache and your SD Card's EXT Partition will have the rest of the Apps and their Data.
ETC INFO
You will Need ROOT Access for almost everything if you want to make changes so make sure you have SuperUser Access Turned ON in MIUI.
Search for ADAWAY which creates a HOSTS file in your /System/etc Directory, which helps to block ads. I prefer using only open source apps or apps with Ads that do not Annoy.
Use ES File Explorer
And now you can install (or Uninstall) all the Pesky large size Google Apps. I personally stay away from ANY Google App I do not absolutely Need. I remove apps like
Google Search
Google Talk (Hangouts)
and Other Google crap.
MIUI has the basics of what you need. But you can Remove the MIUI Accounts etc because you won't be needing it.
And Anything Pesky that I cannot trust. Make sure you Backup in Recovery first before Uninstalling System Apps.
You can use an app called Disable Service from the PlayStore to disable Individual Services in an app incase you don't want certain services loading up. This should help conserve memory and cpu cycles if needed and also to disable functionalities in Apps that are otherwise impossible to disable. Link Below
https://play.google.com/store/apps/details?id=cn.wq.disableservice&hl=en
The idea is to keep it SIMPLE and functional.
Last but not least, Thanks to everyone at XDA for making things like this possible. Without this community, we would not be able to do the things we can to bring enjoyment and functionality to our devices. Thanks to everyone who finds a solution and posts it with details for everyone to understand. I hope this culture keeps growing stronger.
Don't forget to say Thanks
That's it Folks! Bring out your old Nexus One. It will be fast, and serve its purpose as a phone first. And YES, Even your mom will now be able to use it. Enjoy!
ROM DOWNLOAD:
Download MIUI-Android-2.3.30-Gingerbread-NexusOne
Thanks for your time and for sharing this with us... Maybe some of us knows these stuff but in the KK 4.4.4 era, there always is someone who want to use the Sexy Nexy as a fully functional phone and use an eye candy ROM and more user friendly than CM 7.2.
For recovery I recommend 4Ext Recovery
Regards!
Obsy said:
Thanks for your time and for sharing this with us... Maybe some of us knows these stuff but in the KK 4.4.4 era, there always is someone who want to use the Sexy Nexy as a fully functional phone and use an eye candy ROM and more user friendly than CM 7.2.
For recovery I recommend 4Ext Recovery
Regards!
Click to expand...
Click to collapse
Hey, no problem! Yes 4Ext is a good recovery if you are on Blackrose and change your hboot partitions etc. My Guide is for those who don't want to mess with that and the TWRP Recovery is working flawless. I will mess around with Blackrose to increase internal Memory because one thing I find after bootloader unlock is the initial boot process is what takes the longest! MIUI Itself boots in less than half the time it takes for the intial boot. (Nexus X multi colored Logo with gray colored open lock at the bottom)
I am still not quite sure if the trouble of using Blackrose just to cut down my Cache partition to 50mb is worth the time and trouble because the phone is running fine. And I am also not sure if Blackrose will work with twrp. I will need to read more on this.
Thanks.
I completely agree with this OP. This is best rom you can use on the nexus one, I've played around with all sorts of roms and versions including the most recent KitKat iterations and non of them are smooth in comparison with a solid gingerbread rom. But this rom is particularly good because it still makes the Nexus One feel fresh.
daaac said:
I completely agree with this OP. This is best rom you can use on the nexus one, I've played around with all sorts of roms and versions including the most recent KitKat iterations and non of them are smooth in comparison with a solid gingerbread rom. But this rom is particularly good because it still makes the Nexus One feel fresh.
Click to expand...
Click to collapse
Thanks Daaac, you are right. When I pull out this old Phone, people ask me where did I get it? And how nice it looks. When I tell them its over 4 years old, they seem surprised. What google still does not seem to realize is that when it comes to Phones, people look at both the Phone hardware AND its Software that's running on it. Android is terribly ugly and MIUI is the closest you can get to getting some kind of Organized option structure even though it lacks some power user features, it is still better than scrolling through endless Cyanogenmod Gingerbread options. Not the fault of Cyanogenmod, but I blame Google for the terrible User Interface of Android. Google seems to hire Amateurs to design their User Interface and then market it as Simplicity. In my opinion, Apple runs circles around Android when it comes to Fluidity but ofcourse we know why we stick to Android, for things an iOs user can only dream of, specially on older devices. This MIUI ROM comes closest to make your Nexus One a daily usable phone with very few annoyances, however it is stable, never crashes, and looks good.
Thanks for your guide, very nice to read your step by step, good as I didn't update nexus one since 1 year ago and I don't remember all steps.
Thanks!!
You are most certainly welcomed Sir! If you ever have any questions, feel free to ask me.
danibus said:
Thanks for your guide, very nice to read your step by step, good as I didn't update nexus one since 1 year ago and I don't remember all steps.
Thanks!!
Click to expand...
Click to collapse
Thank you very much for taking the time to cook such a nice ROM for Nexus one. I hadn't installed any custom ROM on my device until some days ago. It is really awesome. Considering that Nexus one is an old device I do not expect to be any update for this ROM, but in case there was one I would appreciate it if you could post the link.
You need to see the first post for that to happen.
miui_nexus1 said:
Thank you very much for taking the time to cook such a nice ROM for Nexus one. I hadn't installed any custom ROM on my device until some days ago. It is really awesome. Considering that Nexus one is an old device I do not expect to be any update for this ROM, but in case there was one I would appreciate it if you could post the link.
Click to expand...
Click to collapse
Thanks for your quick reply. I am well aware of your updates to the ROM. I especially love the Nexus pie and appreciate the security updates.
ocd_amp said:
You need to see the first post for that to happen.
Click to expand...
Click to collapse
More security fixes!! I can't believe my eyes. Thanks a ton!
Hola launcher
I have tried Hola launcher (e.g. with chromatic theme), and its icons are similar to MIUI icons in contrast with Hola launcher (which is similar to latest Android versions).
P.s. I am just testing . I don't know if this launcher will drain the battery fast or not.
That launcher will slow down your system, and constantly try to download ads. It also takes up a LOT of RAM. The idea here to make the device run FAST consuming as little resources as possible. On a fresh boot, my N1 RAM usage is at 95MB, and after 28 Hours, it is 144MB. With other processes that are important Cached. My Dialer starts and makes calls upto 3 seconds faster than my Galaxy 3 on Lollipop.
All this can be achieved by disabling Google Play Services and Google Play Store from starting on boot (unless you have apps that you are always using and depend constantly on them) - I don't use apps that heavily depend on Google Play Services, and if I do, I start the service and the app, then I press the "back" key and exit Google Play Services. - Xposed Framework module attached to prevent Apps from running helps.
Battery life is great, easily lasts 2-3 days with minor screen time / talk time - Heavy usage can last a full day. This is all on a 2010 phone with an old battery. My Nexus One puts most people's dual core modern phones to shame when it comes to speed
miui_nexus1 said:
I have tried Hola launcher (e.g. with chromatic theme), and its icons are similar to MIUI icons in contrast with Hola launcher (which is similar to latest Android versions).
P.s. I am just testing . I don't know if this launcher will drain the battery fast or not.
Click to expand...
Click to collapse
That is fantastic battery life and speed you have!
I have got some questions and appreciate your help (Please forgive my newbie questions and such a long post)
1) When I want to run PHONE and MESSAGING applications on “Holo launcher” it gives this error message: "This activity cannot be launched". Although stock MIUI icons for these applications work fine.
2) I partitioned my memory card using ClockworkMod recovery and I dedicated 2 Gb’s of my 16 Gb class 10 microSD card (I haven’t had any problem with this recovery so far but if you think it may be incompatible with your ROM or cause issues please let me know and I will replace it). After flashing Ungaze Data2SD I see an increase in the internal memory . To be honest I didn’t completely understand the rest of the instructions so I do not know whether I have done it right or not.
"You can delete the Contents of /mnt/asec/d2sd/data/app/* and /mnt/asec/d2sd/data/data/* from your Device Root which is "/" after this otherwise you will have 2 copies of the same app. You should only have Dalvik-Cache in this location as it links to your Internal Memory Data partition. Make a backup first to your SD Card in case something goes wrong by copying those APKs, then simply Delete them. Your Device System Partition will have System Apps, Data partition will have Dalvik Cache and your SD Card's EXT Partition will have the rest of the Apps and their Data."
This is what I did:
I used “adb shell” to access the contents of those two locations and deleted their contents. As I said before I didn’t understand the rest of the instructions and I assumed it has been done correctly!! Then I installed my apps normally but I do not know whether they have been copied to the internal memory or the memory card. (I have downloaded apk’s of all apps I use from "apps.evozi. /apk-downloader/" or "apk4fun" and I have installed them using package manager).
My main question is what do I do after cleaning up those two locations and how do I install the apps so they will be copied to the memory Card’s Ext partition.
You should only have Dalvik-Cache in this location (What location exactly?)
Your Device System Partition will have System Apps (/system?)
Data partition will have Dalvik Cache (/data?)
SD Card's EXT Partition (/sd-ext?) If I am right as I have “adb” installed on my windows, it doesn’t show me the contents of this folder naturally. I have Ubuntu Linux too but “adb” is not installed on it.
Thanks a lot for your time!
1) Remove Holo Launcher icons and drag and drop Phone and Messaging icon from Drawer into the Dock at the bottom.
2) Use TWRP recovery.
3) /Data partition is EXT2 partition on your SDCard. Apps+Data (app data) will be there.
4) /mnt/asec/d2sd will be the "other" data partition (the original data partition) which is where your Dalvik cache will be.
5) Apps will be installed where their manifest suggests - Most apps will be installed to /Data on your EXT and their Dalvik Cache will be on the Internal parition /mnt/asec/d2sd/Dalvik-Cache
6) Use ES File Explorer - give it Root permissions - make sure Superuser permissions is set to On and inside ES Explorer you give Root access R/W - you can view all partions there
7) Use DiskInfo to see all your partitions
miui_nexus1 said:
That is fantastic battery life and speed you have!
I have got some questions and appreciate your help (Please forgive my newbie questions and such a long post)
1) When I want to run PHONE and MESSAGING applications on “Holo launcher” it gives this error message: "This activity cannot be launched". Although stock MIUI icons for these applications work fine.
2) I partitioned my memory card using ClockworkMod recovery and I dedicated 2 Gb’s of my 16 Gb class 10 microSD card (I haven’t had any problem with this recovery so far but if you think it may be incompatible with your ROM or cause issues please let me know and I will replace it). After flashing Ungaze Data2SD I see an increase in the internal memory . To be honest I didn’t completely understand the rest of the instructions so I do not know whether I have done it right or not.
"You can delete the Contents of /mnt/asec/d2sd/data/app/* and /mnt/asec/d2sd/data/data/* from your Device Root which is "/" after this otherwise you will have 2 copies of the same app. You should only have Dalvik-Cache in this location as it links to your Internal Memory Data partition. Make a backup first to your SD Card in case something goes wrong by copying those APKs, then simply Delete them. Your Device System Partition will have System Apps, Data partition will have Dalvik Cache and your SD Card's EXT Partition will have the rest of the Apps and their Data."
This is what I did:
I used “adb shell” to access the contents of those two locations and deleted their contents. As I said before I didn’t understand the rest of the instructions and I assumed it has been done correctly!! Then I installed my apps normally but I do not know whether they have been copied to the internal memory or the memory card. (I have downloaded apk’s of all apps I use from "apps.evozi. /apk-downloader/" or "apk4fun" and I have installed them using package manager).
My main question is what do I do after cleaning up those two locations and how do I install the apps so they will be copied to the memory Card’s Ext partition.
You should only have Dalvik-Cache in this location (What location exactly?)
Your Device System Partition will have System Apps (/system?)
Data partition will have Dalvik Cache (/data?)
SD Card's EXT Partition (/sd-ext?) If I am right as I have “adb” installed on my windows, it doesn’t show me the contents of this folder naturally. I have Ubuntu Linux too but “adb” is not installed on it.
Thanks a lot for your time!
Click to expand...
Click to collapse
Thanks a lot for the complete information. Holo launcher and Prevent running are really great. Now only 94 Mb of RAM is used . I expect to have better battery life too. I will report that after some days of using this configuration.
miui_nexus1 said:
Thanks a lot for the complete information. Holo launcher and Prevent running are really great. Now only 94 Mb of RAM is used . I expect to have better battery life too. I will report that after some days of using this configuration.
Click to expand...
Click to collapse
Oh lord, might be joining the N1 family due to recent corrupt internal data/EMMC failures on the Sensation and One Mini. Hoping to get a daily ROM and stable service from AT&T. Any critical updates/preventions prior to dusting off 2 years of being shelved and lending to 3 people (aka TANK N1).
Excited to see activity and will give this a shot when I get home. Thanks for posting!
Thanks for posting about Stagefright bug. It seems to be a hell of a bug. I have done all of them except the first one. Could you elaborate on how to edit build.prop?
By the way just a small thing: there is an extra "r" in
3) Use Firefox. Type about:config > Search for Stragefright > Set stagefright.disabled to True
Thanks again.
You're welcome. Enjoy!
lfe.zaius said:
Oh lord, might be joining the N1 family due to recent corrupt internal data/EMMC failures on the Sensation and One Mini. Hoping to get a daily ROM and stable service from AT&T. Any critical updates/preventions prior to dusting off 2 years of being shelved and lending to 3 people (aka TANK N1).
Excited to see activity and will give this a shot when I get home. Thanks for posting!
Click to expand...
Click to collapse
You edit build.prop either right on the phone using a text editor, or if you're like me, do it on the computer with Notepad++. It's a text based file. Oh yes, that was a spelling error. Fixed.
miui_nexus1 said:
Thanks for posting about Stagefright bug. It seems to be a hell of a bug. I have done all of them except the first one. Could you elaborate on how to edit build.prop?
By the way just a small thing: there is an extra "r" in
3) Use Firefox. Type about:config > Search for Stragefright > Set stagefright.disabled to True
Thanks again.
Click to expand...
Click to collapse
I have opened it using ES file explorer (ES Note editor) on my device but when I want to save it it shows an error:"Error occurred when trying to save the file. It will not be saved.". I have granted Superuser access to ES file explorer but I cannot find a way to give the specified permissions you have mentioned in the post. I would appreciate your help.