I have followed the guide step by step by first installing fastboot rom then restart in fastboot mode (Hold the camera button at power on) to install the latest 2.3.4 CyanogenMod 7 by MU4RIK. It installs without any errors. But when I restart the phone, it shows SwiftDroid logo and then it just gets stuck on the CyanogenMod 7 screen. I have waited more than 20 min but it never gets past it. I even tried recovery method but same problem. Also I have never installed any other rom except the official 2.1 with fastboot. Any ideas on how to fix this?
Have u tried flashing it again??? with fastboot i mean..
Also der r many guides in dis thread for these kinds of problems.... try flashin da kdz file..use mu4riks 1
You can try go into fastboot mode and write in cmd console command for wipe:
fastboot -w
Wystukane z mojego Swifta przy użyciu Tapatalk.
Wipe Data
When In recovery select wipe data/factory reset and it will boot.
Thanks airbus360 It works perfectly.
Related
hey there, people.
well, i installed Mur4ik's 2.3.3-Cyanogenmod-7 and now i want to restore my mobile to the original 2.1 ROM. anybody can explain me what i have to do? i saw this post, but i didn't understood how i do the thing: http://forum.xda-developers.com/showthread.php?t=971899 .
anyway, if u are going to ask what rom i want to put on my mobile, the rom is the portuguese V20A_00.
hope you can help. thanks in advance!
cheers,
Manuel
http://forum.xda-developers.com/showthread.php?t=1119531
Tutorial
To do that follow the steps bellow:
KDZ Updater method
1. Boot in fastboot mode and execute the commands bellow:
- "fastboot -w"
- "fastboot erase system"
- "fastboot erase boot"
2. Reboot from fastboot directly to download mode (Power + Volume Down key)
3. Connect your phone to your PC and open KDZ Updater
4. Select any fastboot ROM
NOTE: YOU CAN NOT FLASH A NORMAL ROM!!! YOU MUST USE A FASTBOOT ROM!!!
5. Flash your rom in "Emergency Mode"
6. When finished the phone will reboot automatically
Recovery method using my brother's recovery file
1. Boot into Recovery mode
2. Wipe your user data (Factory reset)
3. Choose the update.zip file from your SD Card. You can download it here
4. After the update is done, reboot the phone
The ROM is V20A, so it supports Portuguese language.
Hi,
I have the same problem here.
I have upgraded to SwiftDroid 2.3.7 using fastboot command, because there is no boot logo and no recovery in my gt540, after updated with clockwork recovery rom.kdz. But the rom worked just fine.
I had problem the day after. My GT540 won't boot, it only vibrated and when I plug it to PC, Pc recognized fastboot mode. So I downgraded to frenchV20C.kdz without using fastboot -w fastboot erase boot and else.
Now, my gt540 is bricked, it only vibrates when I hold power button, and nothing happen. Can't boot into fastboot mode now.
Any help would be appreciated.
Hello guys
I am trying to flash cm13 on my Yureka(cm11 ) by following the steps
1.unlocked boot loader(by fastboot)
2.flashed twrp recovery (by fastboot)
3.flashed su update(by twrp)
4.copied CM13 Rom file and gapps file into my sd card
5.Rebooted in recovery mode
6.wiped cache,dalvik cache,system,data,internal(eXcept micro sd)
7.Done format system
8.Installed cm13 and gapps
9.Rebooted
Result is got stucked at yu logo :crying:
OTHER METHODS TRIED:
After 9th step i wiped dalvik cache and cache and rebooted
and aslo tried by formating nothing is worked still i stuck at yu logo
Then i thought the problem is with cm13 folder the i tried with RR marshmallo Rom ,miui7 and with infnitive Os but none worked
then i tried crDRoid kitkat version then my phone was properly booted.
i am unable to flash any rom other than crdroid kitkat version
please!!!!!!!!!!!!!!!!!!!!!!! help me with your suggestions:crying:
Thank you
akshay114 said:
Hello guys
I am trying to flash cm13 on my Yureka(cm11 ) by following the steps
1.unlocked boot loader(by fastboot)
2.flashed twrp recovery (by fastboot)
3.flashed su update(by twrp)
4.copied CM13 Rom file and gapps file into my sd card
5.Rebooted in recovery mode
6.wiped cache,dalvik cache,system,data,internal(eXcept micro sd)
7.Done format system
8.Installed cm13 and gapps
9.Rebooted
Result is got stucked at yu logo :crying:
OTHER METHODS TRIED:
After 9th step i wiped dalvik cache and cache and rebooted
and aslo tried by formating nothing is worked still i stuck at yu logo
Then i thought the problem is with cm13 folder the i tried with RR marshmallo Rom ,miui7 and with infnitive Os but none worked
then i tried crDRoid kitkat version then my phone was properly booted.
i am unable to flash any rom other than crdroid kitkat version
please!!!!!!!!!!!!!!!!!!!!!!! help me with your suggestions:crying:
Thank you
Click to expand...
Click to collapse
No mm rom will work unless u first upgrade the default cyanogen software from cm11 to cm12.1 since the bootloader of cm11 is 32bit and cm12.1 is 64bit and all roms mostly are 64bit so they wont boot
So follow the above steps you mentioned the same way but first flash cm12.1 fastboot images and boot then you will be able to flash any rom
Sent from my ONE E1003 using Tapatalk
Hearty thanks for your reply ,cuz i spent more than 5 nights on this but couldnt make it ,now I got clarity about the problem I'll try to implement what you said but how can I update to 12.1 n after that how to root and install twrp or cwm and finally thanks thanks thanks a lot for ur reply
I tried with several KitKat roms
I also tried to install several ROMs, which are based on CM 11, but only 2/20 ROMs have worked.
Rest 18 are not working, and they get stuck up at the 2nd boot screen.
How can I resolve this problem?
loveboy_lion said:
No mm rom will work unless u first upgrade the default cyanogen software from cm11 to cm12.1 since the bootloader of cm11 is 32bit and cm12.1 is 64bit and all roms mostly are 64bit so they wont boot
So follow the above steps you mentioned the same way but first flash cm12.1 fastboot images and boot then you will be able to flash any rom
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
1) download cyanogen os 12.1 fastboot images from here http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
2) download flashing tools from here https://drive.google.com/file/d/0B48lBYmwzkD5cVA1dVFvU0plTW8/view?usp=sharing
3) extract files of both zip files in single folder
4)connect your phone in fastboot mode and check all drivers are installed
5) now open flash-all.bat and let it run
6) if everything went fine then you are done (first boot may take 20 mins after flashing )
7) use this for more http://forum.xda-developers.com/yureka/development/windows-yuware2013266073-t3193757
loveboy_lion said:
1) download cyanogen os 12.1 fastboot images from here http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
2) download flashing tools from here https://drive.google.com/file/d/0B48lBYmwzkD5cVA1dVFvU0plTW8/view?usp=sharing
3) extract files of both zip files in single folder
4)connect your phone in fastboot mode and check all drivers are installed
5) now open flash-all.bat and let it run
6) if everything went fine then you are done (first boot may take 20 mins after flashing )
7) use this for more http://forum.xda-developers.com/yureka/development/windows-yuware2013266073-t3193757
Click to expand...
Click to collapse
Thanks for your reply
lovely boy am done as u said now how to enter into recovery and how to unlock the device,???
i tried by using
adb reboot bootloader
fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery recovery-yu.img
and tried to enter into recovery mode but i see a blank screen for few seconds and rebooted into normal mode and switched on
akshay114 said:
Thanks for your reply
lovely boy am done as u said now how to enter into recovery and how to unlock the device,???
i tried by using
adb reboot bootloader
fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery recovery-yu.img
and tried to enter into recovery mode but i see a blank screen for few seconds and rebooted into normal mode and switched on
Click to expand...
Click to collapse
you have to flash 64 bit recovery 32 bit wont work
http://forum.xda-developers.com/yur...recovery-twrp-2-8-4-0-touch-recovery-t3004699
Hey guys,
I have a problem with a bricked xiaomi redmi 2 prime.
After a bootloop i tried to fix the problem with a system reset. But this does not work
After i booted into recovery and wiped all data, the phone reboot but than nothing happend. So i tried to flash the rom with the mi flash tool, but there i get the error "remote: failed to write partition".
So i went over to the adb and fastboot programms, with fastboot i erased system, userdata, recovery, boot and then i flashed the images of this elements back on the phone (fastboot flash sayed that flashing went successfully)
Then the phone reboot, nothing happend and i can´t get into recovery mode, also adb doesn´t recognoze the phone anymore
Have you any idea what i can do to fix the phone, or can i put it into the trash?
Thanks for your help
Stop experimenting.
Does fastboot work? Do a full flash with miflash(erasing all storage)(firmware should be of your model itself)
If fastboot doesnt work,try putting in the charger with battery in,if there is any vibration,you have a chance of reviving your r2
#fingerscrossed
Ezio95 said:
Hey guys,
I have a problem with a bricked xiaomi redmi 2 prime.
After a bootloop i tried to fix the problem with a system reset. But this does not work
After i booted into recovery and wiped all data, the phone reboot but than nothing happend. So i tried to flash the rom with the mi flash tool, but there i get the error "remote: failed to write partition".
So i went over to the adb and fastboot programms, with fastboot i erased system, userdata, recovery, boot and then i flashed the images of this elements back on the phone (fastboot flash sayed that flashing went successfully)
Then the phone reboot, nothing happend and i can´t get into recovery mode, also adb doesn´t recognoze the phone anymore
Have you any idea what i can do to fix the phone, or can i put it into the trash?
Thanks for your help
Click to expand...
Click to collapse
Yup actually download the latest version of miui fastboot files..paste them in the fastboot folder... Dont bother erasing you phn again(as it does erase at the time of writing new files...)And most importantly flashing only 3 files is more than enough. Flash them in the order boot.img, system.img, recovery.img and thats it. If your problem is actually not booting into fastboot then....press the volume down button and insert your usb while keeping it pressed.
Hey guys,
thanks for the answers. I tryed to flash only thees 3 files but it doesn´t change anything. fastboot works without trouble so far.
I tried multiple times the xiaomi flashing tool but this only throws errors -.-'
I will try again and keep you by the actual progress ^^
Ezio95 said:
Hey guys,
thanks for the answers. I tryed to flash only thees 3 files but it doesn´t change anything. fastboot works without trouble so far.
I tried multiple times the xiaomi flashing tool but this only throws errors -.-'
I will try again and keep you by the actual progress ^^
Click to expand...
Click to collapse
If you can get the fastboot to work, you can flash recovery on your phone for good or temporarily to flash zips.
How to do it?
1.Get into fastboot on phone
2.Install minimal adb and fastboot in your computer
3.Run adb and install drivers
4.Connect your phone which should be in fastboot to computer
5.Check for devices by using "fastboot devices", if a device is listed, proceed
6.Download a custom recovery, rename the recovery img to something easy than using the full name and copy the img into the folder where minimal adb and fastboot is installed
7.Type in "fastboot flash recovery <name you gave to recovery img>.img" (img for the image format) to flash recovery permanently
OR
7.Type in "fastboot boot <recovery name>.img" to use it temporarily, this method will erase the recovery on reboot so flash whatever you want before rebooting if you're following this method.
8.Flash in your ROM zip, try stock and custom ROMs, see if you can get your phone to work
GOOD LUCK
Same error with my yureka plus (error "remote: failed to write partition"). I'm planning to buy redmi 2 prime.. . Scared if this will happen to redmi 2 prime
So I had Cyanogenmod 13 installed on my Huawei P9 Lite VNS-L21 and I decided to go back to stock. I could not find a tutorial how to go back to stock from cyanogenmod so I just flashed the whole zip file which contained UPDATE.APP. Now when I try to boot my phone it shows me a black screen. If I connect my phone to pc it does not recognize it. I then put only the UPDATE.APP in the dload folder and tried updating using the three button method but it says software install failed. I know it was my fault but I somehow missed Meticuluses tutorial --->
How do I get back to stock?
If you have an sdcard and followed the install instructions.
In TWRP: Advanced->Extras->Restore Dump
Reboot System
Now the system will boot up like it's brand new. May take 5mins or so.
Once the system has booted you can reboot back to recovery and restore your back up.
If you do not have an sdcard all you have to do is put system.img and boot.img back on the phone in /emmc and do the 2 commands in reverse and format /data in recovery adb shell like this:
dd if=/emmc/system.img of=dev/block/platform/hi_mci.0/by-name/system
dd if=/emmc/boot.img of=dev/block/platform/hi_mci.0/by-name/boot
make_ext4fs /dev/block/platform/hi_mci.0/by-name/userdata
You can restore your stock rom with your own backup in twrp mode.. it is in step by step manual....
Odoslané z VNS-L21 pomocou Tapatalku
mrmajco said:
You can restore your stock rom with your own backup in twrp mode.. it is in step by step manual....
Odoslané z VNS-L21 pomocou Tapatalku
Click to expand...
Click to collapse
But I cant boot in recovery
Can you boot to fastboot?
If yes check if bootloader is locked/unlocked. Install again TWRP and try again.
Potato997 said:
Can you boot to fastboot?
If yes check if bootloader is locked/unlocked. Install again TWRP and try again.
Click to expand...
Click to collapse
I can boot to fastboot and my bootloader is unlocked but when I connect it to pc it does not recognise it
Uhm, try to open device manager and see if the phone is recognized.
Return to Huawei warranty and tell them its caused due a update...flash stock recovery and lock the bootloader first....i've had this problem also for 10 days.
vozilo said:
I can boot to fastboot and my bootloader is unlocked but when I connect it to pc it does not recognise it
Click to expand...
Click to collapse
Try reinstall drivers....
Odoslané z VNS-L21 pomocou Tapatalku
Could it be that it does not recognise it because i had cm installed
I cant find my phone in device manager
Reinstall adb drivers and go to fastboot mode
Odoslané z VNS-L21 pomocou Tapatalku
I did install the drivers. When I go in fastboot mode and connect my phone to pc, I hear a sound when I connect the phon and HiSuite shows up but it only says device not connected. And when I open cmd and type in adb devices it does not show any device.
Ok I managed to solve the problem thanks
You need to make a recovery dump
man, how did you put system and boot.img in the phone
please man
diorenzo said:
man, how did you put system and boot.img in the phone
please man
Click to expand...
Click to collapse
Do you have your own backup???
Odoslané z VNS-L21 pomocou Tapatalku
vozilo said:
I cant find my phone in device manager
Click to expand...
Click to collapse
Hold Vol + and Vol - and Home Button together, then you will be able to boot back into twrp
hey guys.i am in a bad situation now.I unlocked bootloader on my mi a1 and,installed twrp successfully.then,i wanted to install custom rom.I downloaded AEX and Gapps-ARM64-8.1-NANO.I followed all steps correctly,flashed rom;but,when i pressed reboot to system,it got stuck in bootloop for 30 minutes.So,i immediately rebooted to twrp recovery.then,i wiped data.then,i pressed reboot to bootloader,but suddenly i pressed do not install twrp.it then rebooted to stock recovery.then,i pressed reboot,and then,it booted succesfully to aex.but,i am not able to install playstore,or any app.also,device is not detecting in pc in fastboot mode.
Someone please help, am stuck on aex with no function app except phone and via browser......on stock recovery.....unable to install any apps,not even playstore
Harold128 said:
hey guys.i am in a bad situation now.I unlocked bootloader on my mi a1 and,installed twrp successfully.then,i wanted to install custom rom.I downloaded AEX and Gapps-ARM64-8.1-NANO.I followed all steps correctly,flashed rom;but,when i pressed reboot to system,it got stuck in bootloop for 30 minutes.So,i immediately rebooted to twrp recovery.then,i wiped data.then,i pressed reboot to bootloader,but suddenly i pressed do not install twrp.it then rebooted to stock recovery.then,i pressed reboot,and then,it booted succesfully to aex.but,i am not able to install playstore,or any app.also,device is not detecting in pc in fastboot mode.
Someone please help, am stuck on aex with no function app except phone and via browser......on stock recovery.....unable to install any apps,not even playstore
Click to expand...
Click to collapse
Flash stock boot.img using fastboot command
Then use mi flash tool and install fastboot ROM
akashavel said:
Flash stock boot.img using fastboot command
Then use mi flash tool and install fastboot ROM
Click to expand...
Click to collapse
Hey,Akshay.Can u give me the needful links for stock boot.img, mi flash tool and fastboot ROM ,?
Also,what command should I enter?
Harold128 said:
Hey,Akshay.Can u give me the needful links for stock boot.img, mi flash tool and fastboot ROM ,?
Also,what command should I enter?
Click to expand...
Click to collapse
Download stock and flash according to the instructions given on that site
http://en.miui.com/getrom-333.html?m=yes&mobile=2