Hi.
My HTC magic doesn't find any network (while in 2G mode), this happened out of nothing.
I tried everything, updated my ROM, my radio, my spl (now I have android 2.3.4).
Nothing worked and I really don't understand why.
I also tried puting the new libril.so and librilswitch.so, and didn't even asked me for the sim pin anymore.
I even tried the gfree method explained here http://pheide.com/go/blog/computors...arching-for-networks"-on-unlocked-t|mobile-g2
I also tried a new sim card.. still not working. Please give me a solution, someone, a developer or anyone. thank you
PS... When travelling a dont often have 3G network, so I can't use the phone, even if other people have a full service.
The error is the one in the title, and sometimes I get, cannot connect to this network at this time.
so nobody's helping me?
i've updated the radio from 2.22.19.261 to 2.22.27.08 and the issue is the same as i said, can't find network in 2G mode. (for example in the country side)
I really need it to work also in 2G and 3G mode, some help?
what is your radio set to in
*#*#INFO#*#*
...
i had this problem when i tried a different kernel
my solution:
full wipe in recovery
reset to recovery
full wipe in recovery
flashed last nandroid that worked properly
let the the system boot and see if that fixes it
thank you svpb for your reply. In *#*#INFO#*#* I tried everything, wcdma only, wcdma preffered, gsm (auto), nothing worked since it always chooses 3G, but when there was no 3G network, i was out of signal.
So, I decided to put back the original radio, the 2.22.19.26I (always tought that the last 'I' whas a '1'). So, I downloaded it from http://code.google.com/p/superatmel/downloads/detail?name=ota-radio-2_22_19_26I.zip&can=2&q=
And yuppy, it worked, no signal problems anymore.
I tought about what you said, and i tried a lot of kernels with different android roms 2.1, 2.2, 2.3, but I thing the radio software was broken or something.
LE: I am still wondering why it didn't work with 2.22.27.08 radio, but I'm glad it's good now.
Ok, it seems like it didn't work. The 2G network is not working again.
As I said in the first post, the error started out of the blue, I didn't change anything that day. Could it be hardware wise?
Other thoughts?
rom with GSM radio , the phone worked fine when on 3G but when it couldent get 3G the phone would fall back to GSM 2G , and of course the phones 2g radio was cdma so they got no reception.
i am on rogers gsm and i always have my phone set to (GSM PRL) and find it gets good signal.
hsdpa and wcdma is a designation for 3g
also WCDMA and CDMA are completely different
(someone correct me if im wrong)
i would also look at setting it back to factory and see if you can get a warenty repair (if you qualify)
I no longer have warranty.
could you recommend me a radio? working radio, that is compatible with 2.2.1 (currently I have kernel 2.6.34.5-cyanogenmod, build no FRG83)
Related
I'm new to flashing custom roms and what not. I used odin and flashed everything to the point, csc, modem,pda,pit the rom works awesome but i cannot for the life of me connect to the internet. the 3g icon or h icon wont' show up. in the status it says my network type is gprs and i'm roaming and my mobile network state is disconnected.
I'm with fido, the phone is unlocked i have never had trouble with data or anything until i flashed to a custom rom.
Anyone have the same problem or suggest how to fix?
Data Conn. Issue
Hey mate,
Have you gone into 'Settings', 'Wireless and Networks', 'Mobile Networks' and then 'APN settings' and entered your appropriate settings?
That should fix it if you define the correct access point.
Alex
hey man, yeah i did all that stuff, went in there, found my carrier, put in all the apn settings i can find and still nothing. when i put data roaming on then i get data and the edge icon comes up.
Hey dude,
That sounds strange, flashing custom (or even release) roms is never a guarantee especially with weaknesses in the way that ODIN communicates with your phone, What I would do is Re-Flash your stock rom through ODIN then use the "quick" install method from Darkyy.
I am running 5.6 like you, and I had issues doing it through odin (I kept getting random FC's), additionally, the rom; if installed from CWM will keep your apns and apps e.t.c. along with many settings and configs from the base rom you're using before the flash.
That is the best advice I can give you.
Alex
My config is a follows:
I9000 International
16gb SDHC
500HZ Hardcore Kernel
Darkyy 5.6
Whats the process for reverting back to stock 2.1 eclair rom?
Did you keep a record of your firmware version before reflashing?
If not, you may have to ask someone on here what your base firmware was.
Are you familiar with using ODIN? (The software used for reflashing)
Alex
I am having same issue to...I used 5.4 from Darky and it works well...same with DocRom 4.0 works and the next 5.1/6.0 don't work.
Both Darkys and DocRom are based some JPX....which seem to be root cause..
I've have the same problem. Tried eveything but still didn't work. So went to Samsung Service Centre to have my SGS firmware refresh. I notice after the refreshed same issue of data com missing. Told them and they when into the SGS to select the telco operator setting selection. Now data com. working well. Anyone know the SGS handset setting code? I want to reload to Darky's v5.6 again.
hi folks
i have the same problem... my provider is a virtual provider in the network of our biggest provider here in austria. i was using doc's rom based on xwjpa firmeware and everything worked fine without enabled roaming options.
since doc's rom is based on the newer releases (xxjpx, xxjpy) i' only able to use data connection if i turn on roaming. it also shows me that i'm in a roaming network. i guess the cause are the xx firmwares. xw and xx are european firmwares but i do not know the differences between them. maybe someone has more information about the differences? currently i'm using xwjpa firmware because i don't want to use my phone with enabled roaming options.
hey um i'm having the same problem and thought replying here would be better than starting a new thread.
well i installed the rom without having any idea of what i was doing *stupid idea* so i didn't take note of my original firmware.
i didn't use odin to install the rom just clockwork recovery and the rom and everything installed fine except my data network. i can get signal, call, receive the only problem is i get no data transfer. any help much appreciated. if anything can someone help me step by step to reboot my phone to original?
just for future travellers
Sadly this isn't my own gem, but yeah. hold the power button down, wait for the shutdown menu, above the airplane mode there is a data network button, and it'll most likely say "de-activated" if nothing else has worked. Its ok to feel like a chump, I did after rehashing the hell out of this phone for a few days ( the wifes phone, my phone does exactly what its told. )
Anyway, yeah, this will probably be the reason for the lack of the icon "G", "3G" or "H" where it should be.
Dave.
Hello,
First of all,
- I'm on Imilka's GB vivo (ported from mdj vivo for des hd)
- I'm using radio 2.15.50.14
- I live in the netherlands
- My network provider is KPN Hi (no data plan, only using Wi-Fi)
Yes, I've searched for this problem already, found 2 different threads, both with (more or less) the same problem, both without solution, so I thought "let's try this again"
two days ago, I took my phone and started to play some games, listen to music etc. just like I do normally, but then I got a pop-up saying "no service". I tried to connect to my network in settings, but then it said my sim-card didn't allow my to connect to KPN. I tried different roms (all android nand) and radios, but without succes. Yesterday I tried putting winmo on it again, then it worked. SD android also worked for some reason. Well I really want Android, and I really love those sense 3.0 parts like lockscreen and rosie, and I definitely want gingerbread sense, but there aren't any of those SD builds.
Do I really have to go back to winmo with a SD build?
Thanks in advance!
You can try this:
go to Dialer and press: *#*#4636#*#*
Then go to Phone infomation, select: WCDMA preferred
press Refresh than Update and Toggle DNS check (0.0.0.0 allowed)
reboot
Doesn't work either
Sent from my HD2 using XDA App
Do you have a rom that did work? if so you can try this:
Extract the libhtc_ril.so and the libril.so and replace the ones that you have in the rom and then try again. I would replace it by pushing it into the rom and then reboot, you might need to fix permissions if it doesnt work the first time. Thats what controls the communication between the radio and the cell towers.
AngelDeath said:
Do you have a rom that did work? if so you can try this:
Extract the libhtc_ril.so and the libril.so and replace the ones that you have in the rom and then try again. I would replace it by pushing it into the rom and then reboot, you might need to fix permissions if it doesnt work the first time. Thats what controls the communication between the radio and the cell towers.
Click to expand...
Click to collapse
Hmm I don't think this will work...
first because I haven't found a working nand so far (only sd) and second because I'm a NAND Android user since it came out, but this is the first time with this problem...
And I've done fix permissions already about 20-30 times =C
I tried putting the SIM card into my sisters phone too, she had full service. The weird part is that I also put my mothers SIM card in my phone earlier, and I had full service, WEIRD. So I thought at first it was my provider's problem, because Vodafone works perfectly good, but then my sister came with her full service...
Still thanks for reply. I hope someone comes with working solution soon...
anyone?
I really need a solution... stuck with wm now. maybe going to wp7
task 29, reflash radio, MAGLDR then android rom? Might help, iunno. xD
I was experiencing the exact same thing as you describe. Unfortunately.....i prob just forgot to renew my contract :S
You were able to call with your sim in another phone??
I already did task29 and its not because of contract because Im on winmo now, and I do have service all the time..
Hi
i got exactly the same Problem. in Android no Service. WMO works well all the Time. if i set to gsm only i got network connection for 1 minute or so. Any hints???
Phil
So, some Progress....
i flashed a RUU to went Back to WMO Stock. -> Wireless Service works well.
next step i installed MAGLDR113 and ClockWork Recovery
Next i flashes this ROM:
http://forum.xda-developers.com/showthread.php?t=933951
Flashed gApps
Reboot
Can't get wireless Service
Phone *#*#4636#*#*
Phoneinformation
GSM Only
DNS check 0.0.0.0 allowed.
Now i got stable Wireless Service Connection. Only 2g but stable till now.
We should gather some Infos to find simularitys between Phones having this Problem:
HTC HD2 LEO EU-Version
Radio: 2.15.50.14
16GB Micro-SD Card 15GB fat32, 1gb ext4 for App2SD
T-Mobile DE
MAGLDR 1.13
Another thing i see on my Phone. If i deactive the PIN-Code and restart the Phone i got network Connection with 3G for about 5 seconds. So it seems there is something which kills the 3g Connection on Boot.
still no solution... anyone else pls?
I have the same problem. Had it with my phone a while back and sent it in for repairs to HTC (for freezing issue). Got another back and it worked fine for awhile. But now I'm getting the temporary no signal issue. Only solution I have found is to turn on airplane mode and turn it off.
Also, I have been able to receive text messages when I have "no signal" but cannot send them.
Running Magldr 1.13, radio 2.15, miui 1.5.27
Hey folks.
Not actually an x10 user myself, but someone I know with an x10 is having an issue.
he bought an unlocked x10 from europe, and has been using it with Rogers for a long time now.
After running the gingerbread update, he's lost the ability to connect to the towers. The APN settings have disappeared, I restored them, but he's still unable to connect. Tried manually selecting a network. On WCDMA only, nothing shows up. On GSM/WCDMA mode, the only option is 2G (Yes, there is good 3G service in the area). If I try and connect to 2G, it tries to register, then returns an error saying the SIM does not allow connections to this network. I tried with both my SIM and his, same result.
I did a quick check, and I see the x10 european model supports 900/1700/2100, but it obviously also supports 850/1900 considering he was connecting before the update.
My question, has the update changed the radio making the phone unable to recognize the 850/1900 HSPA bands? If so, is there a way to go back to Froyo without rooting/flashing a custom ROM?
Thanks for your help
crap, sorry, please move to Q&A. I thought I clicked QA, my apologies.
It doesn't also sorry the other bands, that's impossible.
The radio hardware is different.
scoobysnacks said:
It doesn't also sorry the other bands, that's impossible.
The radio hardware is different.
Click to expand...
Click to collapse
hmm.. unless he's been on only 2G the entire time?
Still doesn't explain why he's unable to connect to 2G at the present though...
download flashtool 3 and then find an tft file for the firmware you want, this will wipe the phone
Greenycq20 said:
download flashtool 3 and then find an tft file for the firmware you want, this will wipe the phone
Click to expand...
Click to collapse
thanks, I'll pass that along.
Does it require root/unlocked boot?
nope because you are only puting back on original Firmware, also just try SEUS to factory reset phone and reinstall firmware should kick it in to gear
Hi,
I hope someone here can help me. The other night I was browsing the net at home (wi-fi connection) and after a while, if I'm not wrong, I've seen that the phone lost the phone/line connection, but I was not that worried: 1)I was in an area of my home where the cellphone line is not that good, 2) I was about to turn off the phone. The problem is that the next morning I turned it on and got "No service" and there was no way to get the operator line.
Tried the following things:
1) I didn't have the last version of MIUI so I updated it
2) Tried with an old release
3) Made a full wipe
4) Tried another kernel
5) Tried two different radios
6) Set a just rooted-Stock Rom
7) Tried an old august backup
8) Tried sim of different operators
All these things didn't produce any good result.
I also can tell you that the bars of the signal (close to the clock) are visible and the line is very good but if I try to select manually an operator I get "error" something like "now is impossible to connect to this operator, try later".
I really hope someone can help me and is not an hardware problem (but now I don't really now...)
Thank you and have a nice day!
sorry for my poor english that i did not read all post
but
first of all , get outta home , find somewhere outside because there has better single.
try flash a new radio.
go to MOBILE NETWORK SETTINGS ---> NERWORK OPERATORS
select "SELECT AUTOMATICALLY"
and ... sometimes MIUI does have single lost problem , if all of these don't work , try flash Stock ROM to determinate if its ROM problem , radio problem or , in the worse scenario , the hardware problem
Yes ok...thanks for the effort but is clear that you didn't read the post. I tried all of that and trying to select manually doesn't work.
Any radio version suggested?
Try the KB3 or the new kf1. Kd always gave me radio dumps couple of times a day with miui
Tried with KF1 no luck.
Any other suggestion?
Ok one update:
typing *#*#4636#*#*
I can see my operator, my IMEI but NOT my phone number.
My phone number doesn't show as well. Did u manage to get your phone to work again? If not, have u tried putting a different sim from the same or a different operator?
I tried almost everything...nothing works. Tried different sims, different operators...nothing.
What model do you have? And did you by mistake flash a wrong radio. A one that wasn't supposed to be for your phone ( I'm outta ideas)
Try
*#*#72786#*#*
Put msl
Select yes
U need to move the EFS files into root of SD.
Nv.log
Nv_data.bin
Nv_data.bin.md5
U must flash a compatible radio first then move them with root explorer
Reboot the phone and ull be fine
-Sent While Motor boating Your Mom =D
Hi guys!
I'm from Venezuela, I recently acquired a Nexus 6p (h1511), so yes, I'm a noob. When the cell phone arrived in Venezuela, I connected it to the Wi-Fi network without placing a SIM card, and there was an update notification, I executed it, anyway it already came with Oreo 8.1, the update was December, the one that had It was November. After updating the SIM of the operator Movistar, recognizes it since it says "Without service - Movistar", when trying to call it shows the error "Mobile network not available", when trying to do a network search, it gives error, sometimes to one side of the signal bar, appears an R (Roaming I guess) ... I've been doing a lot of research, believe me I would not be creating this post if I was not so desperate, I have many doubts
I took it to a technician, he looked at it and said it was CDMA that there was nothing to do, he wanted to sell me a GSM motherboard, I told him I would think about it, it was strange for me to be just CDMA, I investigate more and I realize that it's dual, and it changes from MEID to IMEI when I put the SIM card ... I did a factory reset and it did not work. I used the options in *#*#4636#*#* the default is LTE/CDMA/UMTS Auto (PRL) ... I tried to put GSM Only or Auto or any option that included GSM. Without apparent results, I think that it did not even change the default option, the radio bands are few, all from the USA (logical being the USA version of the cell phone) ...
Investigating further, I understood that the problem persists in Android Oreo ... Under the official firmware of Google 7.1.2, I follow the steps, I do the unlocking bootloader, flash vendor / radio, flashing system, in the end there is an error , something about user, I really do not remember, something like that could not erase the user partition or had no permissions ... The issue is that I turn on the cell phone, start to do an erasure, then start asking for google account, etc. ... I configure it, but I see everything the same, I enter the configuration and details of the team, it keeps dialing android 8.1.0, but I see that the base band has changed, some apps have changed, like the application of calls ...
Does anyone know what happened? (And no, the SIM problem was not fixed) :crying:
I want to install this ROM
https://forum.xda-developers.com/nexus-6p/development/rom-chroma-11-08-2015-lockscreen-navbar-t3244444
According to many sites and here in XDA comment that it solves the problem, but this is 6.0.1 ... It means that I must flash 6.0 stock? To install the custom? Or can I install on 8.1?
Any other more updated custom rom that solves this problem?
Thank you! :fingers-crossed: