Ive got some OC issue, i set it to 245mhz minimum and 710.4Mhz max. But it reverts instantly back to 600 even tho set cpu shows me the numbers i want on the bars. how come? have i missed something ?! Best regards, GoonsquadX8
Related
Currently running VillainROM 10.3.0 (with Sense UI)
Does anyone get problems regularly on the slightest of underclocking (using SetCPU)?
Min at 245:
- Alarm wont turn off (only snoozes)
- Clock on Lock screen wont update
Min at 128:
- Music player becomes stuttery, took a few minutes for screen to power on to turn off music
Noone else seems to have mentioned it ?
Am I doing something wrong?
And its a bit worrying considering so many custom ROMs come pre-clocked.
Totally a hardware issue. Your phone just can't cope with the lower speeds. Not all can.
Mine will do 19mhz on sleep and wake immediately etc. but most others won't
Villainrom should default to the stock settings unless you install something like setcpu and define oc settings.
Not sure about other roms but I guess they do similar unless otherwise stated.
ah cheers.
i knew that some phones couldnt reach a particular Max clock speed, but didnt know it was a similar case with the Min clock speed too
You should try Cronos Droid. I am having the exact same problem as you on all OC'ed 2.1 roms, except Cronos Droid.
My settings on Cronos:
Screen on: 710 mhz
Screen off: 160 mhz
Hey guys,
A few weeks back I rom'd my HTC hero with VillainRom 12 and it was working great for awhile. Now however it crashes all the time, or just freezes up and I have to remove the battery.
I have the phone over clocked to about 650mHz. The battery temps seem fine.
Has anyone else experienced this problem before? Any way I can do a debug on my phone to find out what's crashing?
It's really starting to annoy me considering that I use my phone for my business and it's not good when a customer calls and my phone dies and reboots when I go to answer a call.
try overclocking to a lower extent
it might be because your phone cannot handle ur clock speed
(my MAX clock speed is 672... it simply crashes with 691 or higher)
You were absolutely right. It was clocked too high.
I turned it down and now it works great.
Thanks for the tip.
652 seems to be my max.
710 is my max, I can't go below 192 either or the phone starts to have a fit, I wanted to use a lower clock speed in "screen off" mode, but I'll have to stick with 192
I didnt want to root my phone HTC WILDFIRE because I am a little noob at these things a I thought I would totally destroy my phone.
But I found out that it is not so hard to root it as I thought, so today I succesfully rooted my phone. Than I wanted to overclock my procesor from 528 Mhz to I think 768 by downloading new kernel etc... Everything went good. I succesfully installed(or what, I said I am a little noob) that new kernel and was happy that my Wildfire will be faster.
But now I can see that my phone is lagging more, sometimes it freezes what i couldnt see before when It had original kernel.
HOW IS IT POSSIBLE?
Pls help
Do you have SetCPU installed? Then turn it a bit down, till 690~710 Mhz
Maxing it totally out can make your phone unstable. Think about it like a car, when it has 100 hp's and you tune it to 150 hp's things might break.
From stock 528 to 768 isn't a walk in the park, it's +45%
Yes I have setCPU and when I set my procesor to about 710 Mhz it lags and freezes. When I set it to about 580 it is doing the same. The only one solution of this I think is to reinstal the kernel.
Now I have 2.6.32.21-HCDRJacob-ga91 e 73b- [email protected] 1.
That is the full name of it. And in setcpu info it shows me before the version ( 2.6.32.21-HCDRJacob-ga91 e 73b- [email protected] 1) Linux versio... Maybe thats the problem???
And I have to find some solution as fast as possible because sometimes when somebody calls me I cant answer because of a biiiig lag. And then I cant do anything.
Thx for help
What id the minimum speed set to? I wouldn't go below 160. And my max is 672mhz.
Are you running different profiles or just the main profile in setCPU? Mine used to lag when i had a few profiles running but i have removed them all and only using the main profile and the lag has now gone.
when i went to wildpuzzle i found whatever speed i set my processor through set cpu it froze about 4-5 times a day. after flashing the kernel to remove overclocking it has not frozen in a week. everything really responsive, checking auto detect speeds with set cpu shows max 528mhz min450mhz
I tried many options and at last its OK. firstly I had a big difference between max and min of my procesor at setCPU, so I tried to set it to min about 630 and max about 700.
Now it is OK I dont know how, but I am happy the ****y problem is somehow solved and everytjing now goes very smoothly, thx u all
ephbee said:
when i went to wildpuzzle i found whatever speed i set my processor through set cpu it froze about 4-5 times a day. after flashing the kernel to remove overclocking it has not frozen in a week. everything really responsive, checking auto detect speeds with set cpu shows max 528mhz min450mhz
Click to expand...
Click to collapse
So what kernel did you flash it to?
Hi I`ve got SetCPU installed and flashed jacobs 0130 kernal so I can overclock my Wildfire.
Now I`ve got a small issue, I`ve set it at 710 max and 556 min settings and it seems to be running fine, but when the battery starts getting a bit low it causes it to freeze and have problems running some apps. I know its personal choice for how much it is overclocked but are there any recommended speeds for min and max settings to get it running well or is it just a question of experimenting until I get it to my liking?
I have searched the forums and everyone seem to have different preferences.
Thanks again Nexus04
I got random freezes using SetCPU too. I uninstalled and used OverclockWidget instead, havent had a single freeze since
Thanks I`ll have a look at that
why do you have your minimum setting overclocked? the slowest your phone can go even with screen off is 556, no wonder phone chucking a hissy fit
i'm running 691 max 245 min set on performance, not one freeze.
running wildpuzzle v.08
Thanks ephbee, thats made that clear for me, I was having a "DOH" moment there
Hi guys,
i tried CM7 but it was really laggy at my device, a lot of you guys said it is a very fast release !? so how can i get it working smooth ? when i wanted to get into the cpu settings i had a force close every time, jit was enabled..
do i have to get setcpu ? when yes where? which frequencies run smooth and stable ?
thanks in advance
eichl0r said:
Hi guys,
i tried CM7 but it was really laggy at my device, a lot of you guys said it is a very fast release !? so how can i get it working smooth ? when i wanted to get into the cpu settings i had a force close every time, jit was enabled..
do i have to get setcpu ? when yes where? which frequencies run smooth and stable ?
thanks in advance
Click to expand...
Click to collapse
Wipe EVERYTING, install CM7 then install HCDR.Kernal 4.1 (4.2 doesn't work as well) then use another overclock program, not setcpu, it doesn't work well with CM7. Hope that helps you!
* First, try flashing Kernel v4.1. CM7 comes with Kernel 4.2 by default, and, because it is clocked at 768 max, it leads to a lot of stability problems for everyone. Look for the HCDR.Kernel Topic in Wildfire Android Development Zone
* After that, you can install SetCPU. The SetCPU Dev has a thread here on XDA where he has posted the APK of SetCPU for download. Just enter SetCPU in the search bar and you should be able to find the thread with no issues. Here, you can set the max (Upto 710 recommended) and min (upto 245 recommended)
This should solve your lag and stability issues. If it still doesn;t, two more apps which can cause lag are (Note: This affects only a small %age of members with CM7)
* SetCPU (Alternative: OverclockWidget)
* ADW.Launcher (Alternative: Any other Launcher)
Oh, and CPU Settings FC's for everyone, from the time it was implemented. Looks like it is not ready yet.
Good Luck
hey 3xeno, thanks for your tipps!
with kernel 4.1 + setcpu + adw.launcher ex it finally works good!
the only thing thats a little strange is that i couldnt use my overclock setup from the openfire rom i had before, i have your suggested settings + screen of profile (352 max 245 min)+ tmep > 46° profile (352 max 245min), with openfire it was possible to have it at 691 mhz max and 245mhz min for normal mode, now i had to put it on 614 max 245min to not get the battery too warm, but anything else works great
eichl0r said:
hey 3xeno, thanks for your tipps!
with kernel 4.1 + setcpu + adw.launcher ex it finally works good!
the only thing thats a little strange is that i couldnt use my overclock setup from the openfire rom i had before, i have your suggested settings + screen of profile (352 max 245 min)+ tmep > 46° profile (352 max 245min), with openfire it was possible to have it at 691 mhz max and 245mhz min for normal mode, now i had to put it on 614 max 245min to not get the battery too warm, but anything else works great
Click to expand...
Click to collapse
That is rather weird, because, many are keeping it at 710 MHz Max and having no issues. What is your battery temperature when you keep it at 691? (And at idle. It is normal for the phone to get warm when you continuously run a heavy app like a game on it, also, I am sure you know this, but dont measure during charging, it does get pretty warm then )
hmm i played around with the phone a little and then put it in my pants pocket, after wa while when i put it back out it has restarted i guess and i was very warm at the back...hmm ill test it a little perhaps it was a one time thing