Hello. I'm really new to the g1, I got it just two weeks ago, and right now I have JFv1.50 ADP1.5 installed right now. I'm not familiar with many of the technical terms, but I'm starting to understand everything.
I went through the root process, trying to follow some guide using a root.apk application to download/ install the right files, but it bricked my phone. I was able to manually get it to JFv1.50 ADP1.5 later on though.
Now my problem is that I believe I still have the normal recovery image on the phone. In recovery mode there is a picture of an exclamation mark in a triangle.
So I figured I'd go try to use JF's 1.43 recovery image. I put the zip on my SD card and renamed it update.zip. When I go into recovery mode now, though, and press ALT+S, I see the installation/ update bar pop up for like 3 seconds, enough for the orange progress bar to move a few millimeters, and then it just stops. No error message or anything.
I tried installing the test keys recovery image also, but it didn't work at all.
I really need JF's recovery image though, so I can make backups etc.
I've searched for this, but the closest problem I can see is this one:
http://forum.xda-developers.com/archive/index.php/t-505950.html
But for me, I don't even get an error message when using the update.zip...
Sorry for my lack of technical knowledge here, but try to bear with me
Thanks for any help you can give me!
The cooked roms are signed with testkeys, so the original recovery mode will refuse to flash them. You'll have to get the recovery image modified by JF and flash it. The latest version is included in JF v1.43. You can find recovery.img in a folder called data in that zip.
Copy it to your sdcard or adb push it to somewhere on the phone. Then type these commands on the phone:
su
flash_image recovery /path/to/recovery.img
You must have root in order to do this. Alternatively, you can push the file to /system and the init script will flash it for you the next time you boot.
billc.cn said:
The cooked roms are signed with testkeys, so the original recovery mode will refuse to flash them. You'll have to get the recovery image modified by JF and flash it. The latest version is included in JF v1.43. You can find recovery.img in a folder called data in that zip.
Copy it to your sdcard or adb push it to somewhere on the phone. Then type these commands on the phone:
su
flash_image recovery /path/to/recovery.img
You must have root in order to do this. Alternatively, you can push the file to /system and the init script will flash it for you the next time you boot.
Click to expand...
Click to collapse
Thanks so much! I couldn't figure this out until now. It's working perfectly now.
Feel free to close this thread. Thanks again
Hello World,
I am a little confused, I have tried to understand how to install update.zip files onto the i9000t but I seem to not understand.
What I do know, is how to use Odin and install files, either a single file or individually. Can someone please give me a step by step or point me to a thread on installing update.zip? Im a beginner that whats to make the most of my phone.
Also can I backup as everytime I update my PDA file?? I wipe everything Yes Im a battler.
Cheers
Update zip but the first question is what update zip .
Usual zip files install via CWM clockwork mod recovery .
Boot to recovery install sdcard/update/zip.
MUST READ
http://forum.xda-developers.com/showthread.php?t=723596
jje
melbournehiphop said:
Hello World,
I am a little confused, I have tried to understand how to install update.zip files onto the i9000t but I seem to not understand.
What I do know, is how to use Odin and install files, either a single file or individually. Can someone please give me a step by step or point me to a thread on installing update.zip? Im a beginner that whats to make the most of my phone.
Also can I backup as everytime I update my PDA file?? I wipe everything Yes Im a battler.
Cheers
Click to expand...
Click to collapse
You need to have 2E recovery working on your phone in order to install unsigned update.zip files, either check your phone for the 2E recovery by going into 3 button recovery mode (switch phone off, hold volume up, home key and power button until logo appears on screen and let go of all 3) and the screen will say whether you have 2E or 3E recovery mode or here is a link to Chanfires excellent kernels which include 2E recovery but you must flash them with onto the phone with Odin. I'm not too familiar with the i9000t so you had best do some reading up first to make sure it can be done with your phone as you could brick it if the kernel is not for your unit.
Once you have the kernel flashed onto the phone or you have checked and already have 2E recovery, simply make sure the update.zip file is on the root folder of your internal SD and select the install update.zip option in recovery mode (you get into this as described above)
Hello XDA Developers! Last time I was here I was hacking a HTC Blue Angel..That was a long time away....I digress
I have this phone which is currently running a 2.3.4 rom and I have ClockworkMod Recovery v2.5.0.5, and when I download any of the 2.3.7 roms this is what happens:
I drag the recovery zip to my phone with no extraction at all and select install zip from recovery menu. It does nothing.
I extract the zip file and end up with recovery.img and a zip file. I drag both to the root of my memory card and then select install zip from my phone. I then get the following error:
i.imgur.com/xlHip.png
I have absolutely no idea what to try from here, the biggest problem i've dealt with thus far was a md5 mismatch...
Kevin
normankev said:
Hello XDA Developers! Last time I was here I was hacking a HTC Blue Angel..That was a long time away....I digress
I have this phone which is currently running a 2.3.4 rom and I have ClockworkMod Recovery v2.5.0.5, and when I download any of the 2.3.7 roms this is what happens:
I drag the recovery zip to my phone with no extraction at all and select install zip from recovery menu. It does nothing.
I extract the zip file and end up with recovery.img and a zip file. I drag both to the root of my memory card and then select install zip from my phone. I then get the following error:
i.imgur.com/xlHip.png
I have absolutely no idea what to try from here, the biggest problem i've dealt with thus far was a md5 mismatch...
Kevin
Click to expand...
Click to collapse
Try toggling script asserts, or re-download the file.
Also, I suggest updating your recovery to 2.5.1.8.
Thanks for the quick reply!
I toggled script asserts so it was enabled, for the raw unmodified zip file nothing happened, and for the extracted zip file I got an Error seven again
I've tried redownloading the file multiple times, even getting earlier versions of the rom to try.
How would I go about updating recovery? I don't have a functional usb cable at the moment unfortunately but if absolutely neccessary I can hack one up.
normankev said:
I toggled script asserts so it was enabled, for the raw unmodified zip file nothing happened, and for the extracted zip file I got an Error seven again
Click to expand...
Click to collapse
I think you should have the asserts disabled to get past the error. (use the extracted zip, which gave you the error 7)
If this does not help, probably best way to go forward is to get a usb cable and try flashing using fastboot
Tried to update my wife's Nexus 10 tonight. It's unlocked and rooted, formerly on the stock version of Jelly Bean. I thought this would be an easy update since it was stock jellybean to kitkat with the official OTA file but I guess I was wrong. Got the OTA update notification so I allowed it to reboot and install. CWM Touch Recovery picked it up and I told it to install the unsigned zip. Got near the end and it had an error. Now it's stuck in boot (appears to be Kit Kat boot). Just sits on the 4 colored circles going in/out in the middle of the screen.
I need to fix this without wiping data. It's her only computer that she uses daily so she's got a million things on there she uses all the time. If I have to wipe data, she'll be pissed (and I'll lose my hard earned game saves).
Attached is a picture of the error. I've got WUG's toolkit if it's necessary to use to fix this. Any ideas what's going on and how to fix it? Thanks.
Stinger2300 said:
Tried to update my wife's Nexus 10 tonight. It's unlocked and rooted, formerly on the stock version of Jelly Bean. I thought this would be an easy update since it was stock jellybean to kitkat with the official OTA file but I guess I was wrong. Got the OTA update notification so I allowed it to reboot and install. CWM Touch Recovery picked it up and I told it to install the unsigned zip. Got near the end and it had an error. Now it's stuck in boot (appears to be Kit Kat boot). Just sits on the 4 colored circles going in/out in the middle of the screen.
I need to fix this without wiping data. It's her only computer that she uses daily so she's got a million things on there she uses all the time. If I have to wipe data, she'll be pissed (and I'll lose my hard earned game saves).
Attached is a picture of the error. I've got WUG's toolkit if it's necessary to use to fix this. Any ideas what's going on and how to fix it? Thanks.
Click to expand...
Click to collapse
I have a rooted/unlocked Nexus 10, I used wugfresh's kit also. I got the OTA update last night. it installed. CWM never came up or did anything. During one of the boots after the green droid bot was saying "installing" the boot finished, but my green bot is now on his side. stomach open and it says "Error" in red bold letter.
I had to go to work, so I couldnt trouble shoot, but power off/on and soft reset (power+volume up select reset) didnt help. always comes to that "error".
I have data that is also not currently backed up with TBpro. hindsight I should have made sure I turned the scheduler on.
So I'm stuck also. not sure how to proceed. Got one recommendation to flash stock back on. But I think that will for sure wipe all my data. And beyond that, I dont know how, unless WUGs kit will do that.
Your best bet it is to sideload. Grab the OTA and the FULL 4.4
Pull the recovery.img from the full 4.4 rar (its in the zip), fastboot flash it, reboot into bootloader, go to recovery and sideload the OTA and that should restore it just fine
EDIT: http://forum.xda-developers.com/showpost.php?p=47656450&postcount=8
my detailed instructions there for sideloading
planet_x69 said:
Your best bet it is to sideload. Grab the OTA and the FULL 4.4
Pull the recovery.img from the full 4.4 rar (its in the zip), fastboot flash it, reboot into bootloader, go to recovery and sideload the OTA and that should restore it just fine
EDIT: http://forum.xda-developers.com/showpost.php?p=47656450&postcount=8
my detailed instructions there for sideloading
Click to expand...
Click to collapse
I was about to say. whaaaaat? then saw the link with some details. Never done that stuff before, just used other tools kits, like wugs. But doesnt sound to bad. Will try when I get home. I presume when you say into a adb directory, its something on the desktop pc you are connected to. outside of perhaps some drivers, do I need other applications on the PC to facilitate the adb stuff you mention?
jetguat said:
I was about to say. whaaaaat? then saw the link with some details. Never done that stuff before, just used other tools kits, like wugs. But doesnt sound to bad. Will try when I get home. I presume when you say into a adb directory, its something on the desktop pc you are connected to. outside of perhaps some drivers, do I need other applications on the PC to facilitate the adb stuff you mention?
Click to expand...
Click to collapse
Well if you are unfamiliar with the process you will need to get the android SDK installed or find one of the pre-packaged current adb loads. It's very simple, get this package here: http://downloadandroidrom.com/file/Nexus10/Nexus10RootNew.zip# (yes its a crappy ad link but hey the guy packaged it all up so...).
If you are on a PC extract these to a folder of your choice.
Open file manager
Navigage to the folder you extracted the files to
on the left pan select the folder, press SHIFT and Right Click mouse, then select "Open command window here"
You can now follow my instructions from the other page - Do the following below FIRST
If you are prompted to accept security allowance on your device do so. you will likely only see this once you are back into the Android OS not in recovery.
This folder has all the basics you need to fastboot and run adb.
Connect your device to your pc and run >fastboot reboot-bootloader.
If your device restarts and goes into the bootloader you can relax and follow my instructions.
Hope this helps.
One other thing, that su zip is dated, you will need to flash the 1.51 version and you should be good to complete root process.
Wow, this seems about 3 miles over my head but I guess I'll dive in and try it. Thanks for the info. I'm sure I'll be back with problems/questions.
planet_x69 said:
Well if you are unfamiliar with the process you will need to get the android SDK installed or find one of the pre-packaged current adb loads. It's very simple, get this package here: http://downloadandroidrom.com/file/Nexus10/Nexus10RootNew.zip# (yes its a crappy ad link but hey the guy packaged it all up so...).
If you are on a PC extract these to a folder of your choice.
Open file manager
Navigage to the folder you extracted the files to
on the left pan select the folder, press SHIFT and Right Click mouse, then select "Open command window here"
You can now follow my instructions from the other page - Do the following below FIRST
If you are prompted to accept security allowance on your device do so. you will likely only see this once you are back into the Android OS not in recovery.
This folder has all the basics you need to fastboot and run adb.
Connect your device to your pc and run >fastboot reboot-bootloader.
If your device restarts and goes into the bootloader you can relax and follow my instructions.
Hope this helps.
One other thing, that su zip is dated, you will need to flash the 1.51 version and you should be good to complete root process.
Click to expand...
Click to collapse
OK, I downloaded the packaged linked above and extracted it to the desktop. Then I used file manager to "open command window here". Where do I get su zip 1.51? I tried to google a link but they all seemed newer (1.75 for example). Does it matter if it's 1.51 exactly or can it be any version 1.51 or newer? One last question regarding su zip, does that need to be updated after this whole process is complete and I'm up and running again, or does it need to be done before I move on to the instructions you linked to above? Thanks.
Stinger2300 said:
OK, I downloaded the packaged linked above and extracted it to the desktop. Then I used file manager to "open command window here". Where do I get su zip 1.51? I tried to google a link but they all seemed newer (1.75 for example). Does it matter if it's 1.51 exactly or can it be any version 1.51 or newer? One last question regarding su zip, does that need to be updated after this whole process is complete and I'm up and running again, or does it need to be done before I move on to the instructions you linked to above? Thanks.
Click to expand...
Click to collapse
You don't need to root at all but the updated supersu 1.75 will be just fine as its universal. You can get the official from here: http://download.chainfire.eu/368/SuperSU/UPDATE-SuperSU-v1.75.zip
You will install that ONLY after you have installed the OTA's and your custom recovery and only if you want root.
good luck!
planet_x69 said:
Your best bet it is to sideload. Grab the OTA and the FULL 4.4
Pull the recovery.img from the full 4.4 rar (its in the zip), fastboot flash it, reboot into bootloader, go to recovery and sideload the OTA and that should restore it just fine
EDIT: http://forum.xda-developers.com/showpost.php?p=47656450&postcount=8
my detailed instructions there for sideloading
Click to expand...
Click to collapse
In this link, you said to do the following:
Pull the full stock 4.4 image from here : https://developers.google.com/androi...mages#mantaray
open it and pull out from the zip in the rar the recovery.img, move a copy to your adb folder along with a copy of your custom recovery ( for discussion sake I'll use twrp.recovery.img)
Put copy of the patch in the adb folder and rename it to a short name like krt16s.zip
I got the full stock 4.4 image downloaded, extracted it, extracted the zip file inside (image-mantaray-krt16s.zip) and that provided me with "recovery.img" you mentioned above.
Now I have 2 problems, where is this "adb folder" you say to put the recovery.img in, and where is the custom recovery? I assume it's on the N10 after I connect it to my laptop. Is there a preferred custom recovery I should use? I saw mention of TWRP not working with Kit Kat elsewhere. Not sure if that is dated info or not.
Lastly, just to confirm this is true, none of this whole process will wipe my data correct?
planet_x69 said:
You don't need to root at all but the updated supersu 1.75 will be just fine as its universal. You can get the official from here: http://download.chainfire.eu/368/SuperSU/UPDATE-SuperSU-v1.75.zip
You will install that ONLY after you have installed the OTA's and your custom recovery and only if you want root.
good luck!
Click to expand...
Click to collapse
OK, downloaded that and will hold it for later. Hopefully after the questions I just asked are answered, I'll have enough info to proceed. Thanks for the help so far.
Stinger2300 said:
In this link, you said to do the following:
Pull the full stock 4.4 image from here : https://developers.google.com/androi...mages#mantaray
open it and pull out from the zip in the rar the recovery.img, move a copy to your adb folder along with a copy of your custom recovery ( for discussion sake I'll use twrp.recovery.img)
Put copy of the patch in the adb folder and rename it to a short name like krt16s.zip
I got the full stock 4.4 image downloaded, extracted it, extracted the zip file inside (image-mantaray-krt16s.zip) and that provided me with "recovery.img" you mentioned above.
Now I have 2 problems, where is this "adb folder" you say to put the recovery.img in, and where is the custom recovery? I assume it's on the N10 after I connect it to my laptop. Is there a preferred custom recovery I should use? I saw mention of TWRP not working with Kit Kat elsewhere. Not sure if that is dated info or not.
Lastly, just to confirm this is true, none of this whole process will wipe my data correct?
Click to expand...
Click to collapse
Correct - if you SIDELOAD the OTA it will UPGRADE and retain all data and application settings etc...
If you run the 4.4 update from the factory image it will WIPE ALL. So do not do that ....just pull the recover.img from it and get rid of the rest.
If you downloaded this: http://downloadandroidrom.com/file/N...10RootNew.zip#
and extracted it to a new folder - do this first!!!
then copy the recovery.img you just extracted from the factory 4.4 rar to the same folder as the adb and fastboot commands
copy the OTA file to same folder and rename it ota.zip to make your life easier
>fastboot reboot-bootloader to validate your computer can see the device and that the next steps will go as planned
If you are now back bootloader then:
>fastboot flash recovery recover.img
wait till its done..will take about 15 seconds tops
>fastboot reboot-bootloader again and go to recovery using the volume buttons
select and enter recovery mode
wait for dead droid to appear
press both Volume UP and Power at same time and you should get the load menu
select "apply updated from adb" and press power after selecting
orange colored type will now appear at the bottom of the screen
on your PC
>adb sideload ota.zip
wait till you see its completed successfully
then reboot
(you can also apply the smaller ota (1.7MB) this same way)
If all went well you have now booted up successfully and see that your ass has been saved from eternal hell from your wife's wrath...
reboot and fastboot flash your favorite custom recovery reboot again to recovery and apply the su update for root access
I hope this helps
You can also read this: http://www.androidpolice.com/2013/1...-download-and-install-android-4-4-now-krt16o/
You said: "just pull the recover.img from it and get rid of the rest."
So is your instruction from the original link to: "Put copy of the patch in the adb folder and rename it to a short name like krt16s.zip" replaced by the OTA file I renamed to ota.zip in order to retain all data? For reference, krt16s.zip is 390mb, ota.zip is 225mb.
Stinger2300 said:
You said: "just pull the recover.img from it and get rid of the rest."
So is your instruction from the original link to: "Put copy of the patch in the adb folder and rename it to a short name like krt16s.zip" replaced by the OTA file I renamed to ota.zip in order to retain all data? For reference, krt16s.zip is 390mb, ota.zip is 225mb.
Click to expand...
Click to collapse
not sure i follow you but from the 4.4 factory image you will need the recovery.img file thats it. You will also need the OTA upgrade that takes you from 4.3 to 4.4. You need the OTA so that you wont lose your wifes data and will upgrade only and not image the device.
I have to leave and wont be back on till later this weekend.
Going well so far...had an issue but figured it out.
Got to sideloading ota.zip, then after it got to 100% it started verifying the update package. Got an error:
'/system/app/BasicDreams.apk" has unexpected contents
E:Error in /tmp/update.zip
(status 7)
Installation aborted.
Now what?
I found this in the Nexus 7 section but not sure if it applies here or if there is a better way, if it's guaranteed to not wipe data, etc.: http://forum.xda-developers.com/showpost.php?p=47474021&postcount=26
Did you try this solution? I'm stuck on the "Error in /tmp/update.zip" as well. Having the same issues, and I hope to update without loosing data.
No, I haven't tried it as I can't risk losing data by randomly trying stuff I don't understand. I need someone who knows what they are doing to confirm that the steps in this link http://forum.xda-developers.com/showpost.php?p=47474021&postcount=26 won't wipe data or do anything that will require wiping data to finish this process.
have well
Stinger2300 said:
No, I haven't tried it as I can't risk losing data by randomly trying stuff I don't understand. I need someone who knows what they are doing to confirm that the steps in this link http://forum.xda-developers.com/showpost.php?p=47474021&postcount=26 won't wipe data or do anything that will require wiping data to finish this process.
Click to expand...
Click to collapse
I just tried it. And it worked. Didn't loose any data.
Flashing the img files, and then proceeding to sideload the OTA zip. Booting didn't take too long, Android then started upgrading ("Optimizing app..."), and booted successfully. It took a while to open de app drawer though... But everything was still there.
Regaining root access is something I'll try later. I'm just happy to have my N7 booting again.
Just a small disclaimer. I don't really know what I'm doing (I kinda like messing around with my device, it's only way to learn something), so I cannot guarantee it will work for you.
Glad it worked for you, it didn't work for me. I got another error after doing the following commands:
Then, run the following commands:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot erase system
fastboot flash system system.img
then I rebooted back to bootloader, then "apply updated from adb" and then from the command line: >adb sideload ota.zip
It again loaded 100% and then started verifying the package. Then I got this error:
Package expects build fingerprint of google/mantaray/manta:4.3/JWR66Y/776638:user/release-keys or google/mantaray/manta:4.4/KRT160/907817:user/release-keys; this device has google/mantaray/manta:4.4/KRT16S/920375:user/release-keys.
E:Error in /tmp/update.zip
(Status 7)
Installation aborted.
What a F***ing nightmare...
Why do I apparently have the wrong version?
Hmm, might be the wrong OTA zip idd...
I downloaded mine from here: http://www.droid-life.com/2013/11/2...ial-update-for-nexus-7-2012-and-nexus-7-2013/
Hi guys. M currently usimg Nephilim Rom V2. I was trying to flash b594 stock rom. Whenever i tried to install it with stock recovery it just says no update.app is found. Even though i extracted the update.zip file and put it in internal storage in dload folder. I cant even flash it through fastboot because it gives error even though i extracted the img files through Huawei extractor. Can anyone help!!!!
What kind of error fastboot method gives you? I always have went back to stock rom by flashing a rom in fastboot and never had problems with it
While flashing system.img i got error cant load system.img. even though it's in the same folder as adb is. There was also an error whule flashing recovery extracted from update.zip. i was flashing the recovery.img only and it says errot:too many links.
Try to re-download your adb and its related files
cheapster8 said:
Try to re-download your adb and its related files
Click to expand...
Click to collapse
Done that to same result...
So you want your original firmware correct ? If so , go here: http://consumer.huawei.com/nl-en/support/downloads/detail/index.htm?id=82749
Change region (if needed) find your phone and download that.
Once you downloaded it:
1. put it on your sd card
1.1 Since when you download the file, its gonna be in .zip or .rar format, you are gonna need to extract that and what you get out of that file (its gonna be a folder called dload) put that whole thing "dload" on to your sdcard. ( put in in a main folder of your sd card its called root folder, its where your main folders are like pictures, DCIM etc.)
2. turn off your phone leave it for a sec
3. then hold all 3 buttons ( power ,volume up , volume down) and it should start installing the thing.
Hope this helps.
Check this
https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
It's on honor 4x forum but it says it works on p8lite android 5.0 or higher.
Are you able to install stock recovery through adb? If you are, you can easily use Huawei's recovery to flash the stock firmware
cheapster8 said:
Are you able to install stock recovery through adb? If you are, you can easily use Huawei's recovery to flash the stock firmware
Click to expand...
Click to collapse
I guess u havent read my post coz i had clearly stated that i had tried flashing update through stock recovery but it says no update.app found.
keikari said:
Check this
https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
It's on honor 4x forum but it says it works on p8lite android 5.0 or higher.
Click to expand...
Click to collapse
Thanks man it was of some help. I now have b896.
hussam.aleem said:
I guess u havent read my post coz i had clearly stated that i had tried flashing update through stock recovery but it says no update.app found.
Click to expand...
Click to collapse
Ahh, sorry, I meant to say that you could try after flashing stock recovery to use EMUI updater to start the flashing.. anyway good that you got it to work